Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mars dust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Recent studies of the optical properties of dust and cloud particles in the Mars atmosphere and the interannual frequency of global dust storms

The results of research with two distinctly separate sets of observations yield new information on the optical properties of particulate scatterers in the Mars atmosphere, and on the interannual variability of the abundance of such scatterers in the Mars atmosphere. The first set of observations were taken by the IRTM (Infrared Thermal Mapper) instrument onboard the Viking Orbiters, during the period 1976 to 1980. Several hundred emission phase function (EPF) sequences were obtained over the Viking mission, in which the IRTM visual brightness channel observed the same area of surface/atmosphere as the spacecraft passed overhead. The 1 to 2 percent accuracy of calibration and the phase-angle coverage that characterizes these data make them ideally suited to determining both the optical depths and optical properties of dust and cloud scatterers in the Mars atmosphere versus latitude, longitude, seasons (L sub s), and surface elevation over the extended period of Viking observations. The EPF data were analyzed with a multiple scattering radiative transfer code to determine dust single scattering albedos which are distinctly higher than indicated by the Viking Lander observations. The second set of observations regard ground-based observations of the 1.3 to 2.6 mm rotational transitions of CO in the Martian atmosphere. The low-to-mid latitude average of the atmospheric temperature profile (0 to 70 km altitude) were derived from a number of such observations over the 1980 to 1990 period.

Clancy, R. T.↗
NASA NTRS2017

Chemical, Mineralogical, and Physical Properties of Martian Dust and Soil

Global and regional dust storms on Mars have been observed from Earth-based telescopes, Mars orbiters, and surface rovers and landers. Dust storms can be global and regional. Dust is material that is suspended into the atmosphere by winds and has a particle size of 1-3 micrometer. Planetary scientist refer to loose unconsolidated materials at the surface as "soil." The term ''soil'' is used here to denote any loose, unconsolidated material that can be distinguished from rocks, bedrock, or strongly cohesive sediments. No implication for the presence or absence of organic materials or living matter is intended. Soil contains local and regional materials mixed with the globally distributed dust by aeolian processes. Loose, unconsolidated surface materials (dust and soil) may pose challenges for human exploration on Mars. Dust will no doubt adhere to spacesuits, vehicles, habitats, and other surface systems. What will be the impacts on human activity? The objective of this paper is to review the chemical, mineralogical, and physical properties of the martian dust and soil.

Ming, D. W.↗
NASA NTRS1990

Aeolian removal of dust from photovoltaic surfaces on Mars

It is well documented that Mars is totally engulfed in huge dust storms nearly each Martian year. Dust elevated in these global dust storms, or in any of the numerous local dust storms could settle on photovoltaic surfaces and seriously hamper photovoltaic power system performance. Using a recently developed technique to uniformly dust simulated photovoltaic surfaces, samples were subjected to Martian-like winds in an attempt to determine whether natural aeolian processes on Mars would sweep off the settled dust. The effects of wind velocity, angle of attack, height off the Martian surface, and surface coating material were investigated. Principles which can help to guide the design of photovoltaic arrays bound for the Martian surface were uncovered. Most importantly, arrays mounted with an angle of attack approaching 45 deg show the most efficient clearing. Although the angular dependence is not sharp, horizontally mounted arrays required significantly higher wind velocities to clear off the dust. From the perspective of dust-clearing it appears that the arrays may be erected quite near the ground, but previous studies have suggested that saltation effects can be expected to cause such arrays to be covered by sand if they are set up less than about a meter from the ground. Providing that the surface chemistry of Martian dusts is comparable to our test dust, the materials used for protective coating may be optimized for other considerations such as transparency, and chemical or abrasion resistance. The static threshold velocity is low enough that there are regions on Mars which experience winds strong enough to clear off a photovoltaic array if it is properly oriented. Turbulence fences proved to be an ineffective strategy to keep dust cleared from the photovoltaic surfaces.

Gaier, James R.↗
NASA NTRS1999

Development of Prototype Micro-Lidar using Narrow Linewidth Semiconductor Lasers for Mars Boundary Layer Wind and Dust Opacity Profiles

We have developed a compact Doppler lidar concept which utilizes recent developments in semiconductor diode laser technology in order to be considered suitable for wind and dust opacity profiling in the Mars lower atmosphere from a surface location. The current understanding of the Mars global climate and meteorology is very limited, with only sparse, near-surface data available from the Viking and Mars Pathfinder landers, supplemented by long-range remote sensing of the Martian atmosphere. The in situ measurements from a lander-based Doppler lidar would provide a unique dataset particularly for the boundary layer. The coupling of the radiative properties of the lower atmosphere with the dynamics involves the radiative absorption and scattering effects of the wind-driven dust. Variability in solar irradiance, on diurnal and seasonal time scales, drives vertical mixing and PBL (planetary boundary layer) thickness. The lidar data will also contribute to an understanding of the impact of wind-driven dust on lander and rover operations and lifetime through an improvement in our understanding of Mars climatology. In this paper we discuss the Mars lidar concept, and the development of a laboratory prototype for performance studies, using, local boundary layer and topographic target measurements.

Menzies, Robert T.↗
NASA NTRS1993

Hellas Planitia, Mars - Site of net dust erosion and implications for the nature of basin floor deposits

Hellas Planitia, located within an enclosed basin which includes the lowest topography on Mars, appears to be undergoing net erosion. Dust is removed from the basin. It probably contributes to global dust storms and should leave behind a coarse lag. The particle size distributions and particularly the rock or boulder populations in this lag might be useful for distinguishing between processes which formed the lithologic units that comprise Hellas Planitia. This report concludes that the abundance of rock particles larger than coarse sand is very low. Although this hypothesis awaits confirmation from forthcoming spacecraft data, the origins for Hellas floor deposits favored by this study are indurated volcanic airfall or ancient loess, lacustrine deposits, and some types of volcanic mud flows. The conclusions of this study tend to disfavor such geologic processes as blocky lava flows, glacial deposits (e,g., moraines), or boulder-laden catastrophic flood outwash.

Moore, Jeffrey M.↗
NASA NTRS1982

Landing induced dust clouds on Venus and Mars

Spacecraft landings on Mars and Venus provide an opportunity to seek and discover transient dust phenomena with various instruments, and to make inferences about local-scale surface modification processes. The present study is concerned with such dust phenomena. In addition, an attempt is made to relate all of the landing sites on Venus to each other in terms of dust phenomena. On Mars a difference in the magnitude of dust effects was observed between the Viking Lander 1 (VL-1) and Viking Lander 2 (VL-2) sites, which is due to either a particle size variation, or the degree of surface blockiness. It appears that the blocks at VL-2 have somewhat protected the surface fines from being raised by retroengine exhaust. The Venera 10 panorama contains a zone of darkening similar to that in the VL-1 zone.

Garvin, J. B.↗
NASA NTRS1999

Mars Global Surveyor TES Results: Observations of Atmospheric Dust During Mapping

The Mars Global Surveyor entered mapping orbit around Mars in March 1999. Infrared spectra returned by the Thermal Emission Spectrometer (TES) are very well suited for monitoring column-integrated infrared dust opacity. A global view of dust opacity is possible on a daily basis allowing the detailed study of the evolution of dust storms and the seasonal trend of the background dust opacity. Information about the vertical distribution of dust in the atmosphere can be obtained by examination of TES spectra taken in a limb-viewing geometry. We report here on 1) the observed horizontal distribution of dust aerosols and their evolution with time during the mapping phase of the Mars Global Surveyor mission so far (roughly covering northern hemisphere summer and early fall), and 2) the vertical distribution of dust aerosols as determined from TES spectra taken in the limb-viewing geometry.

Smith, Michael D.↗
NASA NTRS1987

Mars - North-Polar atmospheric warming during dust storms

Viking observations of the two 1977 dust storms on Mars yield winter polar atmosphere temperature measurements that indicate a strong spatial and temporal dependence in the process of polar warming. Very little dust appears to be contained in the upper atmosphere; the data do not allow a determination of dust abundance in the lower atmosphere to be made. Surges appear in the polar warming that are prevalent only on one side of the pole, corresponding to the evening side of the 1977 observations. The polar atmospheric warming occurred during the second, but not the first, of the 1977 global dust storms.

Jakosky, Bruce M.↗
NASA NTRS1996

Development of a solar-cell dust opacity measurement instrument for Mars Pathfinder

The atmosphere of Mars has a considerable load of suspended dust. Over time, this dust is deposited out of the atmosphere. The mechanism and the temporal and geographical variation of this deposition are not well characterized. Measurements of settling rates and dust properties are of considerable scientific interest. Atmospheric dust affects the atmospheric solar absorption and thus the heat balance of Mars, as well as serving as nucleation sites for water and CO2 frost. Knowledge of dust properties is of critical interest to design and prediction of the lifetime and power output of solar arrays, and also to design of mechanical mechanisms and radiators. An instrument has been designed and fabricated to measure the dust accumulation during the course of the Mars Pathfinder rover mission. The solar-cell coverglass transmission experiment will measure the change in optical opacity of a transparent coverglass as dust settles on the surface, and a quartz crystal monitor will measure the mass deposited.

Geoffrey A. Landis↗
NASA NTRS2017

Dust Storm Impacts on Human Mars Mission Equipment and Operations

Although it is tempting to use dust impacts on Apollo lunar exploration mission equipment and operations as an analog for human Mars exploration, there are a number of important differences to consider. Apollo missions were about a week long; a human Mars mission will start at least two years before crew depart from Earth, when cargo is pre-deployed, and crewed mission duration may be over 800 days. Each Apollo mission landed at a different site; although no decisions have been made, NASA is investigating multiple human missions to a single Mars landing site, building up capability over time and lowering costs by re-using surface infrastructure. Apollo missions used two, single-use spacecraft; a human Mars mission may require as many as six craft for different phases of the mission, most of which would be re-used by subsequent crews. Apollo crews never ventured more than a few kilometers from their lander; Mars crews may take "camping trips" a hundred kilo-meters or more from their landing site, utilizing pressurized rovers to explore far from their base. Apollo mission designers weren't constrained by human for-ward contamination of the Moon; if we plan to search for evidence of life on Mars we'll have to be more careful. These differences all impact how we will mitigate and manage dust on our human Mars mission equipment and operations.

Rucker, M. A.↗
NASA NTRS2001

Dry Mars: Parched Rocks and Fallen Dust

While "following the water" to find life on Mars, it is easy to overlook evidence that Mars is harshly dry, and to neglect ideas that do not invoke water. Direct evidence for a dry Mars comes from the ALH 84001 meteorite, which has seen little or no liquid water during its last 3.9 billion years on Mars. Its aridity is difficult to reconcile with a Mars of abundant near-surface surface water or with episodes of warm wet climate. Alternative scenarios are also possible, even likely, for the martian gullies and debris flows that have been cited as evidence of liquid water. It is reasonable that the gullies flows are the remnants of massive dust avalanches, comparable to large climax snow avalanches seen on Earth. Mars' surface is now desiccated, and at least part of it has been equally desiccated for the past 3.9 billion years. With this background, and the wealth of atmospheric, imaging, and chemical data available from Mars, one must be very cautious in evaluating claims for liquid water recently at or near Mars' surface. Additional information is contained in the original extended abstract.

Treiman, Allan H.↗
NASA NTRS1989

Persistent dust cloud activity on Mars near Echus Chasma in 1978

The Echus Chasma clouds of Mars, which are the first to be observed by spacecraft in the equatorial canyon region of the planet, extend the geographic and seasonal ranges in which dust stoms are known to occur. Viking camera observations of these clouds in red and violet filters are presently noted to imply their composition to be partly dust and partly condensate. Drainage winds, part of a diurnal wind system driven by thermal and elevation contrasts, are seen as a plausible interpretation of the observed phenomena.

Martin, Leonard J.↗
NASA NTRS2019

Vertical and Horizontal Heterogeneity of Atmospheric Dust Loading in Northern Gale Crater, Mars

This paper updates the record of atmospheric dust loading within northern Gale Crater, Mars, by providing line-of-sight extinction (LOS-Ext) measurements of the intervening dust between the rover and the crater rim. These measurements are derived from images taken with the Navigation Cameras (Navcam) onboard the Mars Science Laboratory (MSL) rover, Curiosity. The observations span 2.44 Mars years, from Mars Year (MY) 31 at a solar longitude (L(sub s)) of 208° to t L(sub s) = 7° of MY34, sols 100–1701 of the MSL surface mission. This work examines the dataset for seasonal trends of the LOS-Ext in addition to horizontal variations and the vertical structure of LOS-Ext. The LOS-Ext has a repetitive pattern with a single peak in the latter half of the Mars year. The atmosphere in the crater is well mixed horizontally but not vertically as larger LOS-Ext is seen nearer the crater floor than at higher altitudes within the crater. The results allow a discussion on whether or not Gale Crater is a sink for atmospheric dust or a source of atmospheric dust in the current era.

Casey A. Moore↗
NASA NTRS1991

Effects of windblown dust on photovoltaic surfaces on Mars

Photovoltaic (PV) coverslip material was subjected to Martian dust storm conditions using basaltic dust flowing through the Martian Surface Wind Tunnel at NASA Ames. Initially dusted and clear coverslips were held at angles from 0 to 90 deg., and the dust laden wind velocity was varied from 20 to 97 m/s. Blowing dust was found to adhere more to the coverslips as the angle was increased. However, dust was partially cleared from surfaces that were initially dusted at substantially lower velocities in dust laden wind than in clear wind. Thus, an equilibrium amount of dust accumulated which was dependent only upon angle and wind velocity and not upon initial concentration of dust. Abrasion was also evident in the coverslips. It increased with wind velocity and angle of attack. It appears that an initial dust layer may help to protect PV surfaces from abrasion.

Gaier, James R.↗
NASA NTRS1979

Mars atmospheric phenomena during major dust storms, as measured at surface

Meteorological instrumentation aboard the Viking Mars Landers measures wind, temperature, and pressure. Two global dust storms occurred during northern autumn and winter, observed both by the orbiters and by the landers. The meteorological data from the landers has been analyzed for the period just before first storm arrival to just after second storm arrival, with the objectives of defining the meteorological phenomena during the storm period, determining those associated with storm and dust arrival, and evaluating the effects on synoptic conditions and the general circulation. Times of dust arrival over the sites could be defined fairly closely from optical and pressure (solar tide) data, and dust arrival was also accompanied by changes in diurnal temperature range, temperature maxima, and temperature minima. The arrivals of the storms at Viking Lander 1 were accompanied by significant increases in wind speed and pressure. No such changes were observed at Viking Lander 2. It is possible that surface material could have been raised locally at Viking Lander 1. Throughout the period except for the time following the second dust storm the synoptic picture at Viking Lander 2 was one of eastward moving cyclonic and anticyclonic systems. These disappeared following the second storm, a phenomenon which may be related to the storm.

Ryan, J. A.↗
NASA NTRS2004

Exploring PV on the Red Planet: Mars Array Technology Experiment and Dust Accumulation and Removal Technology

The environment on the surface of Mars is different in several critical ways from the orbital environment in which space solar arrays normally operate. Some important differences are: 1) Low intensity, low temperature operation; 2) Spectrum modified by atmospheric dust, varies with time; 3) Indirect sunlight; 4) Possibility of dust atoms at some times of year; 5) Deposited dust; 6) Wind; 7) Peroxide-rich reactive soil. We are developing two experiments to test operation of solar arrays on the surface of Mars, to be flown on the 2001 Surveyor Lander mission. The Mars Array Technology Experiment (MATE) will test the operation of several types of solar cells under Mars conditions, and determine the direct and scattered solar spectrum at the surface. The Dust Accumulation and Removal Technology (DART) experiment will monitor the amount of dust deposition on a target solar cell, measure the characteristics of the dust, and test the feasibility of dust removal.

Landis, Geoffrey A.↗
NASA NTRS2004

Using Piezoelectric Ceramics for Dust Mitigation of Space Suits

The particles that make up moon dust and Mars soil can be hazardous to an astronaut s health if not handled properly. In the near future, while exploring outer space, astronauts plan to wander the surfaces of unknown planets. During these explorations, dust and soil will cling to their space suits and become imbedded in the fabric. The astronauts will track moon dust and mars soil back into their living quarters. This not only will create a mess with millions of tiny air-born particles floating around, but will also be dangerous in the case that the fine particles are breathed in and become trapped in an astronaut s lungs. research center are investigating ways to remove these particles from space suits. This problem is very difficult due to the nature of the particles: They are extremely small and have jagged edges which can easily latch onto the fibers of the fabric. For the past summer, I have been involved in researching the potential problems, investigating ways to remove the particles, and conducting experiments to validate the techniques. The current technique under investigation uses piezoelectric ceramics imbedded in the fabric that vibrate and shake the particles free. The particles will be left on the planet s surface or collected a vacuum to be disposed of later. The ceramics vibrate when connected to an AC voltage supply and create a small scale motion similar to what people use at the beach to shake sand off of a beach towel. Because the particles are so small, similar to volcanic ash, caution must be taken to make sure that this technique does not further inbed them in the fabric and make removal more difficult. Only a very precise range of frequency and voltage will produce a suitable vibration. My summer project involved many experiments to determine the correct range. Analysis involved hands on experience with oscilloscopes, amplifiers, piezoelectrics, a high speed camera, microscopes and computers. perfect this technology. Someday, vibration to remove dust may a vital component to the space exploration program. In order to mitigate this problem, engineers and scientists at the NASA-Glenn Further research and experiments are planned to better understand and ultimately

Angel, Heather K.↗