Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A General Stochastic Maximum Principle for SDEs of Mean-field Type

We study the optimal control for stochastic differential equations (SDEs) of mean-field type, in which the coefficients depend on the state of the solution process as well as of its expected value. Moreover, the cost functional is also of mean-field type. This makes the control problem time inconsistent in the sense that the Bellman optimality principle does not hold. For a general action space a Peng's-type stochastic maximum principle (Peng, S.: SIAM J. Control Optim. 2(4), 966-979, 1990) is derived, specifying the necessary conditions for optimality. This maximum principle differs from the classical one in the sense that here the first order adjoint equation turns out to be a linear mean-field backward SDE, while the second order adjoint equation remains the same as in Peng's stochastic maximum principle.

97 MATHEMATICS AND COMPUTING↗

Weak Necessary and Sufficient Stochastic Maximum Principle for Markovian Regime-Switching Diffusion Models

In this paper we prove a weak necessary and sufficient maximum principle for Markovian regime switching stochastic optimal control problems. Instead of insisting on the maximum condition of the Hamiltonian, we show that 0 belongs to the sum of Clarke’s generalized gradient of the Hamiltonian and Clarke’s normal cone of the control constraint set at the optimal control. Under a joint concavity condition on the Hamiltonian and a convexity condition on the terminal objective function, the necessary condition becomes sufficient. We give four examples to demonstrate the weak stochastic maximum principle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laboratory Evaluation of the Thermal Breakout Method for Maximum Horizontal Stress Measurement

Measuring in situ stress is essential for many problems in geomechanics, and the maximum horizontal stress is the most difficult to constrain. We are developing an extension of the breakout method to measure maximum horizontal stress in regions where natural breakouts do not occur. In the novel thermal breakout method, additional compression which leads to breakout development is induced by heating the borehole wall. In the present study, we validated the method experimentally in a true-triaxial apparatus on samples with predrilled boreholes. Two rocks were selected for laboratory testing: high-porosity Berea sandstone and low-porosity Niagaran dolomite. Prior to main true-triaxial tests, we carried out standard testing to characterize the strength, elasticity and thermal properties. The true-triaxial experiments consisted of: (1) room-temperature tests where samples were first loaded mechanically until the breakout formed, and (2) elevated-temperature tests where samples were loaded mechanically within the elastic range with additional compression induced thermally. Breakout initiation was monitored by acoustic emission sensors mounted on the pistons that applied horizontal stresses. Furthermore, the magnitude of induced thermal stress was calculated from temperature measurements around the borehole wall. In both rock types, we created thermally induced breakouts and examined analytical expressions to constrain maximum horizontal stress based on strength, elastic and thermal properties of the rocks.

58 GEOSCIENCES↗

Daily mean temperature estimate at the US SUFRAD stations as an average of the maximum and minimum temperatures

At thousands of stations worldwide, the mean daily surface air temperature is estimated as a mean of the daily maximum (T max ) and minimum (T min ) temperatures. In this paper, we use the NOAA Surface Radiation Budget Network (SURFRAD) of seven US stations with surface air temperature recorded each minute to assess the accuracy of the mean daily temperature estimate as an average of the daily maximum and minimum temperatures and to investigate how the accuracy of the estimate increases with an increasing number of daily temperature observations. We find the average difference between the estimate based on an average of the maximum and minimum temperatures and the average of 1440 1-min daily observations to be - 0.05 ± 1.56 °C, based on analyses of a sample of 238 days of temperature observations. Considering determination of the daily mean temperature based on 3, 4, 6, 12, or 24 daily temperature observations, we find that 2, 4, or 6 daily observations do not reduce significantly the uncertainty of the daily mean temperature. The bias reduction in a statistically significant manner (95% confidence level) occurs only with 12 or 24 daily observations. The daily mean temperature determination based on 24 hourly observations reduces the sample daily temperature uncertainty to - 0.01 ± 0.20 °C. Finally, estimating the parameters of population of all SURFRAD observations, the 95% confidence intervals based on 24 hourly measurements is from - 0.025 to 0.004 °C, compared to a confidence interval from - 0.15 to 0.05 °C based on the mean of T max and T min .

54 ENVIRONMENTAL SCIENCES↗

Regularity of Maximum Distance Minimizers

We study properties of sets having the minimum length (one-dimensional Hausdorff measure) in the class of closed connected sets Σ ⊂ ℝ{sup 2} satisfying the inequality max{sub yϵM} dist (y, Σ) ≤ r for a given compact set M ⊂ ℝ{sup 2} and given r > 0. Such sets play the role of the shortest possible pipelines arriving at a distance at most r to every point of M where M is the set of customers of the pipeline.In this paper, it is announced that every maximum distance minimizer is a union of finitely many curves having one-sided tangent lines at every point. This shows that a maximum distance minimizer is isotopic to a finite Steiner tree even for a “bad” compact set M, which distinguishes it from a solution of the Steiner problem (an example of a Steiner tree with infinitely many branching points can be found in a paper by Paolini, Stepanov, and Teplitskaya). Moreover, the angle between these lines at each point of a maximum distance minimizer is at least 2π/3. Also, we classify the behavior of a minimizer Σ in a neighborhood of any point of Σ. In fact, all the results are proved for a more general class of local minimizers.

97 MATHEMATICS AND COMPUTING↗

Maximum wave power absorption by slender bodies of arbitrary cross sections in oblique seas

Published results for the maximum wave power absorption by slender bodies subjected to vertical defor-mations are extended. To this end, a more general form of the Kochin function is derived for floating or submerged slender bodies of arbitrary (asymmetric) cross sections undergoing vertical or horizontal deformations. The Kochin function allows a determination of the theoretical maximum wave power absorption in oblique seas. It is shown that in beam seas, two-dimensional limits can be recovered when the slender body length tends to infinity. This establishes a formal continuity in behavior from atten-uators (head seas) to terminators (beam seas). The wavelike vertical and horizontal deformations of a flexible body, as well as the hinge motions of an articulated raft are also considered in oblique seas. In the former case, results suggest an equivalence between the maximum absorption width of bodies with symmetric cross sections and two degrees of freedom, and that of bodies with optimal cross sections and one degree of freedom. Altogether, the potential for significant wave power absorption from horizontal motions is also demonstrated.

16 TIDAL AND WAVE POWER↗

High-precision characterization of the neutron light output of stilbene along the directions of maximum and minimum response

The scintillation light output response of stilbene crystals has been calculated for protons recoiling along the a, b, and c' crystalline axes with energies between 1.3 and 10 MeV using neutrons produced with the tandem Van de Graaff accelerator at Triangle Universities Nuclear Laboratory. The proton recoil energy and direction were measured using the coincident detection of neutrons between a stilbene scintillator and an array of EJ-309 liquid scintillators spanning arranged neutron recoil angles. The maximum light output was discovered to coincide with proton recoils along the a-axis, in disagreement with other published measurements, which reported the b-axis as the direction of the maximum light output. Additional measurements were conducted using two different stilbene crystals to confirm these results: a second measurement using the coincident detection of neutrons; measurements of neutron full energy deposition events along the a and b axes; and measurements of the count rate for 252 Cf neutrons traveling along the a and b axes directions. All measurements found that recoils along the a-axis produce the maximum light output.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On Parallel Push-Relabel based Algorithms for Bipartite Maximum Matching

We study multithreaded push-relabel based algorithms for computing maximum cardinality matching in bipartite graphs. Matching is a fundamental combinatorial (graph) problem with applications in a wide variety of problems in science and engineering. We are motivated by its use in the context of sparse linear solvers for computing maximum transversal of a matrix. We implement and test our algorithms on several multi-socket multicore systems and compare their performance to state-of-the-art augmenting path-based serial and parallel algorithms using a testset comprised of a wide range of real-world instances. Building on several heuristics for enhancing performance, we demonstrate good scaling for the parallel push-relabel algorithm. We show that it is comparable to the best augmenting path-based algorithms for bipartite matching. To the best of our knowledge, this is the first extensive study of multithreaded push-relabel based algorithms. In addition to a direct impact on the applications using matching, the proposed algorithmic techniques can be extended to preflow-push based algorithms for computing maximum flow in graphs.

Push-relabel, matching, bipartite↗

Evaluation of a photovoltaic energy mechatronics system with a built-in quadratic maximum power point tracking algorithm

The historically high cost of crude oil price is stimulating research into solar (green) energy as an alternative energy source. In general, applications with large solar energy output require a maximum power point tracking (MPPT) algorithm to optimize the power generated by the photovoltaic effect. This work aims to provide a stand-alone solution for solar energy applications by integrating a DC/DC buck converter to a newly developed quadratic MPPT algorithm along with its appropriate software and hardware. The quadratic MPPT method utilizes three previously used duty cycles with their corresponding power outputs. It approaches the maximum value by using a second order polynomial formula, which converges faster than the existing MPPT algorithm. The hardware implementation takes advantage of the real-time controller system from National Instruments, USA. Experimental results have shown that the proposed solar mechatronics system can correctly and effectively track the maximum power point without any difficulties. (author)

14 SOLAR ENERGY↗

In Pursuit of 2D Materials for Maximum Optical Response

Despite being only a few atoms thick, single-layer two-dimensional (2D) materials display strong electron–photon interactions that could be utilized in efficient light modulators on extreme subwavelength scales. In various applications involving light modulation and manipulation, materials with strong optical response at different wavelengths are required. Using qualitative analytical modeling and first-principles calculations, we determine the theoretical limit of the maximum optical response such as absorbance ($A$) and reflectance ($R$) in 2D materials and also conduct a computational survey to seek out those with best $A$ and $R$ in various frequency ranges, from mid-infrared to deep-ultraviolet. We find that 2D boron has broadband reflectance R > 99% for >100 layers, surpassing conventional thin films of bulk metals such as silver. Moreover, we identify 2D monolayer semiconductors with maximum response, for which we obtain quantitative estimates by calculating quasiparticle energies and accounting for excitonic effects by solving the Bethe–Salpeter equation. We found several monolayer semiconductors with absorbances ≳30% in different optical ranges, which are more than half of the maximum possible value, Alim = 1/2, for a freestanding 2D material. Our study predicts 2D materials which can potentially be used in ultrathin reflectors and absorbers for optoelectronic application in various frequency ranges.

36 MATERIALS SCIENCE↗

Contiguous US summer maximum temperature and heat stress trends in CRU and NOAA Climate Division data plus comparisons to reanalyses

Abstract Warming is a major climate change concern, but the impact of high maximum temperatures depends upon the air’s moisture content. Trends in maximum summertime temperature, moisture, and heat index are tracked over three time periods: 1900–2011, 1950–2011, and 1979–2011; these trends differ notably from annual temperature trends. Trends are emphasized from two CRU datasets (CRUTS3.25 and CRUTS4.01) and two reanalyses (ERA-20C and 20CRv2). Maximum temperature trends tend towards warming that is stronger over the Great Lakes, the interior western and the northeastern contiguous United States. A warming hole in the Midwest generally decreases in size and magnitude when heat stress trends are calculated because the region has increasing moisture. CRU and nearly all reanalyses find cooling in the northern high plains that is not found in NOAA Climate Division trends. These NOAA trends are captured better by CRUTS401. Moistening in the northeast amplifies the heat stress there. Elsewhere the moisture trends are less clear. Drying over northern Texas (after 1996) in CRUTS401 translates into decreasing heat stress there (less so in CRUTS325). Though other reanalyses are not intended for long-term trends, MERRA-2 and ERA-Interim match observed trends better than other reanalyses.

54 ENVIRONMENTAL SCIENCES↗

Verification of maximum radial power peaking factor due to insertion of FPM-LEU target in the core of RSG-GAS reactor

Verification of Maximum Radial Power Peaking Factor due to insertion of FPM-LEU target in the core of RSG-GAS Reactor. Radial Power Peaking Factor in RSG-GAS Reactor is a very important parameter for the safety of RSG-GAS reactor during operation. Data of radial power peaking factor due to the insertion of Fission Product Molybdenum with Low Enriched Uranium (FPM-LEU) was reported by PRSG to BAPETEN through the Safety Analysis Report RSG-GAS for FPM-LEU target irradiation. In order to support the evaluation of the Safety Analysis Report incorporated in the submission, the assessment unit of BAPETEN is carrying out independent assessment in order to verify safety related parameters in the SAR including neutronic aspect. The work includes verification to the maximum radial power peaking factor change due to the insertion of FPM-LEU target in RSG-GAS Reactor by computational method using MCNP5and ORIGEN2. From the results of calculations, the new maximum value of the radial power peaking factor due to the insertion of FPM-LEU target is 1.27. The results of calculations in this study showed a smaller value than 1.4 the limit allowed in the SAR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Maximum probability domains for the analysis of the microscopic structure of liquids

We introduce the concept of maximum probability domains (MPDs), developed in the context of the analysis of electronic densities, in the study of the microscopic spatial structures of liquids. The idea of locating a particle in a three dimensional region, by determining the domain where the probability of finding that, and only that, particle is maximum, gives an interesting characterization of the local structure of the liquid. The optimization procedure, required for the search of the domain of maximum probability, is carried out by the implementation of the level set method. Results for a couple of case studies are presented, to illustrate the structure of liquid water at ambient conditions and upon increasing pressure from the point of view of MPDs and to compare the information encoded in the solvation shells of sodium in water with, once again, that extracted from the MPDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probabilistic and maximum entropy modeling of chemical reaction systems: Characteristics and comparisons to mass action kinetic models

We demonstrate and characterize a first-principles approach to modeling the mass action dynamics of metabolism. Starting from a basic definition of entropy expressed as a multinomial probability density using Boltzmann probabilities with standard chemical potentials, we derive and compare the free energy dissipation and the entropy production rates. We express the relation between entropy production and the chemical master equation for modeling metabolism, which unifies chemical kinetics and chemical thermodynamics. Because prediction uncertainty with respect to parameter variability is frequently a concern with mass action models utilizing rate constants, we compare and contrast the maximum entropy model, which has its own set of rate parameters, to a population of standard mass action models in which the rate constants are randomly chosen. We show that a maximum entropy model is characterized by a high probability of free energy dissipation rate and likewise entropy production rate, relative to other models. We then characterize the variability of the maximum entropy model predictions with respect to uncertainties in parameters (standard free energies of formation) and with respect to ionic strengths typically found in a cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement and maximum in the isobaric specific-heat capacity measurements of deeply supercooled water using ultrafast calorimetry

Knowledge of the temperature dependence of the isobaric specific heat (C p ) upon deep supercooling can give insights regarding the anomalous properties of water. If a maximum in C p exists at a specific temperature, as in the isothermal compressibility, it would further validate the liquid–liquid critical point model that can explain the anomalous increase in thermodynamic response functions. The challenge is that the relevant temperature range falls in the region where ice crystallization becomes rapid, which has previously excluded experiments. Here, we have utilized a methodology of ultrafast calorimetry by determining the temperature jump from femtosecond X-ray pulses after heating with an infrared laser pulse and with a sufficiently long time delay between the pulses to allow measurements at constant pressure. Evaporative cooling of ~15-µm diameter droplets in vacuum enabled us to reach a temperature down to ~228 K with a small fraction of the droplets remaining unfrozen. We observed a sharp increase in C p , from 88 J/mol/K at 244 K to about 218 J/mol/K at 229 K where a maximum is seen. The C p maximum is at a similar temperature as the maxima of the isothermal compressibility and correlation length. From the C p measurement, we estimated the excess entropy and self-diffusion coefficient of water and these properties decrease rapidly below 235 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Maximum Neutral Buoyancy Depth of Juvenile Chinook Salmon: Implications for Survival during Hydroturbine Passage

This study investigated the maximum depth at which juvenile Chinook salmon Oncorhynchus tshawytscha can acclimate by attaining neutral buoyancy. Depth of neutral buoyancy is dependent upon the volume of gas within the swim bladder, which greatly influences the occurrence of injuries to fish passing through hydroturbines. We used two methods to obtain maximum swim bladder volumes that were transformed into depth estimations - the increased excess mass test (IEMT) and the swim bladder rupture test (SBRT). In the IEMT, weights were surgically added to the fishes exterior, requiring the fish to increase swim bladder volume in order to remain neutrally buoyant. SBRT entailed removing and artificially increasing swim bladder volume through decompression. From these tests, we estimate the maximum acclimation depth for juvenile Chinook salmon is a median of 6.7m (range = 4.6-11.6 m). These findings have important implications to survival estimates, studies using tags, hydropower operations, and survival of juvenile salmon that pass through large Kaplan turbines typical of those found within the Columbia and Snake River hydropower system.

54 ENVIRONMENTAL SCIENCES↗

THE FAST DECLINING TYPE Ia SUPERNOVA 2003gs, AND EVIDENCE FOR A SIGNIFICANT DISPERSION IN NEAR-INFRARED ABSOLUTE MAGNITUDES OF FAST DECLINERS AT MAXIMUM LIGHT

We obtained optical photometry of SN 2003gs on 49 nights, from 2 to 494 days after T(B {sub max}). We also obtained near-IR photometry on 21 nights. SN 2003gs was the first fast declining Type Ia SN that has been well observed since SN 1999by. While it was subluminous in optical bands compared to more slowly declining Type Ia SNe, it was not subluminous at maximum light in the near-IR bands. There appears to be a bimodal distribution in the near-IR absolute magnitudes of Type Ia SNe at maximum light. Those that peak in the near-IR after T(B {sub max}) are subluminous in the all bands. Those that peak in the near-IR prior to T(B {sub max}), such as SN 2003gs, have effectively the same near-IR absolute magnitudes at maximum light regardless of the decline rate {delta}m {sub 15}(B). Near-IR spectral evidence suggests that opacities in the outer layers of SN 2003gs are reduced much earlier than for normal Type Ia SNe. That may allow {gamma} rays that power the luminosity to escape more rapidly and accelerate the decline rate. This conclusion is consistent with the photometric behavior of SN 2003gs in the IR, which indicates a faster than normal decline from approximately normal peak brightness.

79 ASTRONOMY AND ASTROPHYSICS↗

MAXIMUM CORONAL MASS EJECTION SPEED AS AN INDICATOR OF SOLAR AND GEOMAGNETIC ACTIVITIES

We investigate the relationship between the monthly averaged maximal speeds of coronal mass ejections (CMEs), international sunspot number (ISSN), and the geomagnetic Dst and Ap indices covering the 1996-2008 time interval (solar cycle 23). Our new findings are as follows. (1) There is a noteworthy relationship between monthly averaged maximum CME speeds and sunspot numbers, Ap and Dst indices. Various peculiarities in the monthly Dst index are correlated better with the fine structures in the CME speed profile than that in the ISSN data. (2) Unlike the sunspot numbers, the CME speed index does not exhibit a double peak maximum. Instead, the CME speed profile peaks during the declining phase of solar cycle 23. Similar to the Ap index, both CME speed and the Dst indices lag behind the sunspot numbers by several months. (3) The CME number shows a double peak similar to that seen in the sunspot numbers. The CME occurrence rate remained very high even near the minimum of the solar cycle 23, when both the sunspot number and the CME average maximum speed were reaching their minimum values. (4) A well-defined peak of the Ap index between 2002 May and 2004 August was co-temporal with the excess of the mid-latitude coronal holes during solar cycle 23. The above findings suggest that the CME speed index may be a useful indicator of both solar and geomagnetic activities. It may have advantages over the sunspot numbers, because it better reflects the intensity of Earth-directed solar eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗