Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microspheres”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Transcatheter Arterial Chemoembolization with Epirubicin-Loaded Superabsorbent Polymer Microspheres for 135 Hepatocellular Carcinoma Patients: Single-Center Experience

Purpose: To evaluate the safety, clinical outcomes, and hepatic artery damage after transcatheter arterial chemoembolization (TACE) with epirubicin-loaded superabsorbent polymer microspheres (ELM-TACE) in patients with hepatocellular carcinoma (HCC) in a single center in Japan. Materials and Methods: This embolic agent is the original form of microspheres, which has the same composition and nature as HepaSpheres. Between May 2007 and June 2009, 135 patients with unresectable HCC who underwent ELM-TACE were enrolled. Embolization through extrahepatic collaterals was performed in 27 (20.0%) patients. Tumor response was evaluated using European Association for the Study of the Liver criteria at 1 and 6 months after initial ELM-TACE. Results: All procedures were successfully performed. The median number of TACE per patient was 1.7 sessions (range 1-5), and the mean epirubicin dose per session was 19.7 mg (range 2.0-60.0). Local pooling within target tumors was observed during TACE in 34 (25.2%) patients, and in 14 (10.4%) of the patients, gelatin sponge particles were added after the microspheres until each pooling disappeared. No serious adverse events associated with TACE occurred, and the incidence of postembolization syndrome was {<=}17.8%. The 1- and 6-month tumor response rates were 56.3 and 52.6%, respectively. The overall 1- and 2-year survival rates were 73.7 and 59.0%, respectively. Among 99 evaluated patients, 90 (90.9%) were found to have no hepatic artery damage after initial ELM-TACE. Conclusion: ELM-TACE is safe and effective treatment for unresectable HCC and is associated with low frequency of postembolization syndrome and minimal damage to the hepatic artery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparative Study Using 100–300 Versus 300–500 μm Microspheres for Symptomatic Patients Due to Enlarged-BPH Prostates

PurposeThe purpose of the study was to compare safety and efficacy outcomes following prostate artery embolization (PAE) for the treatment of lower urinary tract symptoms (LUTS) due to benign prostatic hyperplasia (BPH) with 100–300 versus 300–500 μm tris-acryl gelatin microspheres.Materials and MethodsPatients were prospectively treated between August 2011 and June 2013 to receive PAE with 100–300 μm (group A) or 300–500 μm (group B) tris-acryl gelatin microspheres. Patients were followed for a minimum of 12 months and were assessed for changes in International Prostate Symptom Score (IPSS), quality of life (QoL) index, prostate volume determined by magnetic resonance imaging, serum prostate specific antigen (PSA), and maximum urine flow rate (Q{sub max}), as well as any treatment-related adverse events.ResultsFifteen patients were included in each group, and PAE was technically successful in all cases. Both groups experienced significant improvement in mean IPSS, QoL, prostate volume, PSA, and Q{sub max} (p < 0.05 for all). The differences observed between the two groups included a marginally insignificant more adverse events (p = 0.066) and greater mean serum PSA reduction at 3 months of follow-up (p = 0.056) in group A.ConclusionsBoth 100–300 and 300–500 μm microspheres are safe and effective embolic agents for PAE to treat LUTS-related to BPH. Although functional and imaging outcomes did not differ significantly following use of the two embolic sizes, the greater incidence of adverse events with 100–300 μm microspheres suggests that 300–500 μm embolic materials may be more appropriate.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

{sup 90}Y Resin Microspheres Radioembolization for Colon Cancer Liver Metastases Using Full-Strength Contrast Material

ObjectivesTo assess safety and efficacy of {sup 90}Y resin microspheres administration using undiluted non-ionic contrast material (UDCM) {100% Omnipaque-300 (Iohexol)} in both the “B” and “D” lines.Materials and methodsWe reviewed all colorectal cancer liver metastases patients treated with {sup 90}Y resin microspheres radioembolization (RAE) from 2009 to 2017. As of April 2013, two experienced operators started using UDCM (study group) instead of standard sandwich infusion (control group). Occurrence of myelosuppression (leukopenia, neutropenia, erythrocytopenia or/and thrombocytopenia), stasis, nontarget delivery (NTD), median fluoroscopy radiation dose (FRD), median infusion time (IT), liver progression-free (LPFS) and overall survivals (OS) was evaluated. Complications within 6 months post-RAE were reported according to CTCAE v3.0 criteria.ResultsStudy and control groups comprised 23(28%) and 58(72%) patients, respectively. Median follow-up was 9.1 months. There was no statistically significant difference in myelosuppression incidence within 6 months post-RAE between groups. Median FRD and IT for study and control groups were 44.6 vs. 97.35 Gy/cm{sup 2} (p = 0.048) and 31 vs. 39 min (p = 0.006), respectively. A 38% lower stasis incidence in study group was not significant (p = 0.34). NTD occurred in 1/27(4%) study vs. 5/73(7%) control group procedures (p = 1). Grade 1–2 and grade 3–4 toxicities between study and control group patients were 36%(8/22) vs. 45%(26/58), p = 0.61 and 9%(2/22) vs. 16%(9/58), p = 0.72, respectively. There was no difference in LPFS and OS between groups.ConclusionAdministration of {sup 90}Y resin microspheres using UDCM in both lines is safe and effective, resulting in lower fluoroscopy radiation dose and shorter infusion time, without evidence of myelosuppression or increased stasis incidence.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

End-hole Versus Microvalve Infusion Catheters in Patients Undergoing Drug-Eluting Microspheres-TACE for Solitary Hepatocellular Carcinoma Tumors: A Retrospective Analysis

Introduction: Pre-transplant locoregional therapy for hepatocellular carcinoma (HCC) during bridge-to-transplant impacts recurrence and survival rates following liver transplantation. Optimizing the effectiveness of transarterial chemoembolization (TACE) in this population is imperative, and microvalve infusion catheters offer a means of such improvement. Methods: All treatment-naive patients with solitary HCC tumors < 6.5 cm who underwent drug-eluting microspheres (DEM) TACE between 04/2015 and 08/2017 were retrospectively reviewed. Eighty-eight included patients underwent DEM-TACE with either standard end-hole catheters (EH) or microvalve infusion catheters (MVI). The EH (n = 70) and MVI (n = 18) cohorts had similar baseline tumor size, laboratory values, and tumor etiologies. Results: Initial objective response rates were significantly higher in MVI vs. EH (100% vs. 76.5%, p = 0.019). There was no difference in adverse events between groups (p = 0.265). MVI patients exhibited lower AST (p = 0.003) and ALT (p = 0.044) at 6 months. Blinded pathological analysis of explanted livers showed greater concentrations of microspheres within the tumor relative to the surrounding tissue in MVI explants (88.7 ± 10.6%) versus the EH explants (55.3 ± 32.7%) (p = 0.002). There was significantly higher percentage tumor necrosis in the MVI group (89.0 ± 2.2%) compared with the EH group (56.1 ± 44.5%) (p = 0.006). Conclusion: In this retrospective study of a single-center cohort, DEM-TACE procedures with MVI were associated with improved tumor response, increased deposition of microspheres within tumor tissue, and higher percentage tumor necrosis at explant relative to those performed using EH catheters.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Pneumatic Drop-on-Demand Generation for Production of Metal Oxide Microspheres by Internal Gelation

Drop-on-demand generation is an alternative approach to the traditional vibrating nozzle used for the production of nuclear fuel microspheres via the internal gelation method. We integrated a low-cost pneumatic setup and demonstrated that the drop-on-demand approach has some advantages, such as low inventory of feed solution (attractive for laboratory-scale research), improved drop diameter control, reproducibility, scale-up to desired throughput by simple multiplication of the number of dispensing units, and simple remote operation. However, limitations on reproducibility and drop diameter control still exist due to the intrinsic variation of physical properties, viscosity, and dispensing-tip wettability during the internal gelation process. These adverse effects can be mitigated, to a certain extent, by carefully controlling the temperature of the feed as uniformly as possible. We validated the drop-on-demand generation method by producing solid kernels of yttrium-stabilized zirconia and soft gel microspheres of iron hydroxide. In addition, we have measured the diameter change at each principal process stage. Based on the observed gas entrainment/absorption in the gel spheres, we conjectured that aging and washing are likely the critical stages determining the final precision to which microspheres can be made. Finally, we comment on potential improvements that add robustness to the method for handling other metal precursors in aqueous solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CTAB-assisted synthesis and photocatalytic property of CuO hollow microspheres

CuO hollow microspheres have been fabricated through a simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The effects of reaction temperature, surfactant, and the molar ratio of Urea/Cu(PI) on the morphologies of the resulting products were investigated. The possible formation mechanism of CuO hollow dandelion-like architectures was proposed. The hierarchical CuO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV-light illumination. - Graphical abstract: Dandelion-like CuO hollow microspheres were fabricated through a hydrothermal method. The prepared products exhibited a high photocatalytic activity for the photocatalytic decolorization of Rhodamine B aqueous solution under UV-light illumination.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of NiS nanobelts and NiS{sub 2} microspheres constructed of cuboids architectures

NiS nanobelts of hexagonal phase have been hydrothermally synthesized starting from Ni(CH{sub 3}COO){sub 2}.4H{sub 2}O and Na{sub 2}S{sub 2}O{sub 3}.5H{sub 2}O at 200 deg. C for 12 h. The as-prepared nanobelts were 50 nm thick, 70-200 nm wide and more than 10 {mu}m long. As ethylenediaminetetraacetic acid (EDTA) added, in similar condition, 2 {mu}m NiS{sub 2} microspheres of cubic phase were prepared. However, as Ni{sup 2+}/S{sub 2}O{sub 3}{sup 2-} ratio was 1:1 and the temperature was decreased to 160 deg. C, 5 {mu}m NiS{sub 2} microspheres constructed of cuboids were formed. - Graphical abstract: Hexagonal NiS nanobelts and cubic NiS{sub 2} microspheres were hydrothermally synthesized in the reaction of Ni(CH{sub 3}COO){sub 2}.4H{sub 2}O and Na{sub 2}S{sub 2}O{sub 3}.5H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted hydrothermal synthesis of marigold-like ZnIn{sub 2}S{sub 4} microspheres and their visible light photocatalytic activity

Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a microwave-assisted hydrothermal method with the temperature ranging from 80 to 195 Degree-Sign C. X-ray diffraction, X-ray photoelectron spectroscopy, nitrogen sorption analysis, UV-visible spectroscopy, scanning electron microscopy and transmission electron microscopy were used to characterize the products. It was found that the crystallographic structure and optical property of the products synthesized at different temperatures were almost the same. The degradation of methyl orange (MO) under the visible light irradiation has been used as a probe reaction to investigate the photocatalytic activity of as-prepared ZnIn{sub 2}S{sub 4}, which shows that the ZnIn{sub 2}S{sub 4} sample synthesized at 195 Degree-Sign C shows the best photocatalytic activity for MO degradation. In addition, the photocatalytic activities of all the samples prepared by the microwave-assisted hydrothermal method are better than those prepared by a normal hydrothermal method, which could be attributed to the formation of more defect sites during the microwave-assisted hydrothermal treatment. - Graphical abstract: Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a fast microwave-assisted hydrothermal method at 80-195 Degree-Sign C with a very short reaction time of 10 min. The as-prepared ZnIn{sub 2}S{sub 4} sample can be used as visible light photocatalyst for degradation of organic dyes. Highlights: Black-Right-Pointing-Pointer ZnIn{sub 2}S{sub 4} microspheres were synthesized by microwave-assisted hydrothermal method. Black-Right-Pointing-Pointer The crystal structure and optical property of the products were almost the same. Black-Right-Pointing-Pointer Increment of the temperature renders high surface area due to the bubbling effect. Black-Right-Pointing-Pointer The ZnIn{sub 2}S{sub 4} synthesized at 195 Degree-Sign C shows the best visible catalytic activity for MO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted solvothermal synthesis of flower-like Ag/AgBr/BiOBr microspheres and their high efficient photocatalytic degradation for p-nitrophenol

Flower-like Ag/AgBr/BiOBr microspheres were successfully fabricated by the approach of microwave-assisted solvothermal and in situ photo-assisted reduction. A reactive ionic liquid 1-hexadecyl-3-methylimidazolium bromide ([C{sub 16}mim]Br) was employed as Br source in the presence of surfactant polyvinylpyrrolidone (PVP). The photocatalytic activity of Ag/AgBr/BiOBr towards the decomposition of p-nitrophenol under visible light irradiation was evaluated. The results indicated that Ag/AgBr/BiOBr showed enhanced photocatalytic activity towards p-nitrophenol, comparing with P25, BiOBr and Ag/AgBr. More than 96% of p-nitrophenol was decomposed in 3.5 h under visible-light irradation. The excellent photocatalytic activity of flower-like Ag/AgBr/BiOBr microspheres can be attributed to the large specific surface area, strong visible-light absorption, suitable energy band structure and surface plasmon resonance effect of Ag nanoparticles. The possible photocatalytic mechanism was proposed based on the active species test and band gap structure analysis. - Graphical abstract: The photocatalytic reaction mechanisms of the as-prepared Ag/AgBr/BiOBr. Display Omitted - Highlights: • Successful synthesis of flower-like Ag/AgBr/BiOBr microspheres. • The Ag/AgBr/BiOBr showed much higher photocatalytic activity towards p-nitrophenol as compared to BiOBr and Ag/AgBr. • The reasons for the excellent photocatalytic activity are the large specific surface area, strong visible-light absorption and surface plasmon resonance effect of Ag nanoparticles. • The O{sub 2}·{sup −}, Br{sup 0} and photogenerated h{sup +} play key roles in the photocatalytic degradation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent effects on microstructures and properties of three-dimensional hierarchical TiO{sub 2} microsphere structures synthesized via solvothermal approach

One-step solvothermal method has been proved to be a simple and efficient route to synthesize three-dimensional (3D) hierarchical TiO{sub 2} microsphere structures, but discrepant properties of the solvent media had been claimed as the major factors determining microstructures and properties of the final products. In this study, several typical solvents, including alkane, aromatic hydrocarbons, halohydrocarbon, ketone, organic acid, mono- and dihydric alcohols, were selected to comprehensively investigate the effect of solvents on the morphology, crystal structure, specific surface area, porous property and light harvesting capability of the final products. According to the experimental results, a good interface separating titanium precursor with aqueous phase in the reaction solution, created by non-polar solvents, or polar solvents which are immiscible with titanium precursor, was the decisive factor for the formation of quasi-3D urchin-like TiO{sub 2} microspheres self-assembled from one-dimensional (1D) nanostructures, and concentrated H{sup +} induced by organic acid medium was also helpful. Meanwhile, without the liquid-liquid interface or extremely low solution pH, anatase TiO{sub 2} sphere structures with big specific surface area comprising of nanoparticles or nanosheets would be formed, and performed well in photodegradation of pollutants in water. - Graphical abstract: A good interface separating titanium precursor with aqueous phase is the determining factor to form 3D ordered TiO{sub 2} microspheres self-assembled by 1D nanostructures via solvothermal reaction. Display Omitted - Highlights: • Solvent property is important for the solvothermally synthesized TiO{sub 2} products. • Interface separating titanium precursor with aqueous phase is a determining factor. • Dielectric constant of solvents is also very important. • Low solution pH is helpful for the formation of rod-like building block structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photocatalytic activity of titania microspheres with hierarchical structures

Research highlights: {yields} Lauryl alcohol directs the formation of titania with hierarchical structures. {yields} Hierarchical structures endow the higher specific area to titania. {yields} Titania had a higher photocatalytic activity than commercial Degussa P25. {yields} The synthesis process of the target product is low-cost. -- Abstract: A combined sol-gel and solvothermal process was introduced to fabricate the titania microspheres with hierarchical structures by using lauryl alcohol as the structure-directing agent. Scanning electron microscope, high-resolution transmission electron microscope, Fourier transform infrared spectrograph and powder X-ray powder diffraction indicated that the molar ratio of lauryl alcohol, water and tetra-n-butyl titanate was the key factor for the formation of the mono-dispersed titania with anatase phase and the optimal ratio was 1.2:4:1. The diameter of the end-product was 523 {+-} 74 nm and it was composed of smaller nanoparticles with about 6.8 nm size in diameter. Photocatalytic activity of the end-product was investigated by employing Rhodamine B and Methylene blue as the model compounds. The target microspheres exhibited the higher photocatalytic efficiency compared with commercial Degussa P25 titania and this result might be due to the hierarchical structures of microspheres according to the analysis of Brunauer-Emmett-Teller specific surface areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of hollow mesoporous NiO hexagonal microspheres via hydrothermal process in ionic liquid

Highlights: Black-Right-Pointing-Pointer Ni(OH){sub 2} precursors were synthesized in ionic liquid and water solution by hydrothermal method. Black-Right-Pointing-Pointer NiO hollow microspheres were prepared by thermal treatment of Ni(OH){sub 2} precursors. Black-Right-Pointing-Pointer NiO hollow microspheres were self-assembled by mesoporous cubic and hexagonal nanocrystals with high specific surface area. Black-Right-Pointing-Pointer The mesoporous structure is stable at 773 K. Black-Right-Pointing-Pointer The ionic liquid absorbed on the O-terminate surface of the crystals to form hydrogen bond and played key roles in determining the final shape of the NiO novel microstructure. -- Abstract: The novel NiO hexagonal hollow microspheres have been successfully prepared by annealing Ni(OH){sub 2}, which was synthesized via an ionic liquid-assisted hydrothermal method. The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), N{sub 2} adsorption-desorption and Fourier transform infrared spectrometer (FTIR). The results show that the hollow NiO microstructures are self-organized by mesoporous cubic and hexagonal nanocrystals. The mesoporous structure possessed good thermal stability and high specific surface area (ca. 83 m{sup 2}/g). The ionic liquid 1-butyl-3methylimidazolium tetrafluoroborate ([Bmim][BF{sub 4}]) was found to play a key role in controlling the morphology of NiO microstructures during the hydrothermal process. The special hollow mesoporous architectures will have potential applications in many fields, such as catalysts, absorbents, sensors, drug-delivery carriers, acoustic insulators and supercapacitors.

36 MATERIALS SCIENCE↗

Large-scale synthesis of Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres and their photoluminescence properties

Graphical abstract: In this work, multicolor and monodisperse Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres were prepared by a homogeneous precipitation method followed by a subsequent calcination process. Display Omitted Highlights: ► Lu{sub 2}O{sub 3}:Ln{sup 3+} microspheres were prepared by a precipitation followed by a calcination process. ► Lu{sub 2}O{sub 3}:Eu{sup 3+}/Tb{sup 3+} samples exhibit respective red or green emissions. ► Lu{sub 2}O{sub 3}:Yb{sup 3+}/Er{sup 3+}/Tm{sup 3+}/Ho{sup 3+} exhibit emissions of green, blue, yellow-green, respectively. ► These finding may find potential applications in bioanalysis and field emission displays. -- Abstract: In this work, multicolor and monodisperse Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+}, Tb{sup 3+}, Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) microspheres were prepared by a homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), Fourier transformed infrared (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra were employed to characterize the samples. Upon ultraviolet and low-voltage electron beams excitation, Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Eu{sup 3+} and Tb{sup 3+}) samples exhibit respective bright red (Eu{sup 3+}, {sup 5}D{sub 0} → {sup 7}F{sub 2}) and green (Tb{sup 3+}, {sup 5}D{sub 4} → {sup 7}F{sub 5}) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Lu{sub 2}O{sub 3}:Ln{sup 3+} (Ln{sup 3+} = Yb{sup 3+}/Er{sup 3+}, Yb{sup 3+}/Tm{sup 3+}, and Yb{sup 3+}/Ho{sup 3+}) exhibit characteristic up-conversion (UC) emissions of green (Er{sup 3+}, {sup 4}S{sub 3/2}, {sup 2}H{sub 11/2} → {sup 4}I{sub 15/2}), blue (Tm{sup 3+}, {sup 1}G{sub 4} → {sup 3}H{sub 6}) and yellow-green (Ho{sup 3+}, {sup 5}F{sub 4}, {sup 5}S{sub 2} → {sup 5}I{sub 8}), respectively. These finding may find potential applications in bioanalysis, optoelectronic and nanoscale devices, field emission displays, and so on.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of mesoporous Bi{sub 2}O{sub 3}/CeO{sub 2} microsphere for photocatalytic degradation of Orange II dye

Graphical abstract: - Highlights: • Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were successfully synthesized by a hydrothermal procedure. • Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were used to remove wastewater pollutant containing azo dye. • The activity of Bi{sub 2}O{sub 3}/CeO{sub 2} is synergically enhanced compared to its pristine forms. - Abstract: We report on the visible-light responsive porous assembly of Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres, which were synthesized via a simple hydrothermal reaction between Bi(NO{sub 3}){sub 3}·5H{sub 2}O and Ce(NO{sub 3}){sub 3}·6H{sub 2}O in the presence of ethylene glycol and ethanol. Systematic structural (X-ray diffraction (XRD)), morphological (field emission scanning electron microscopy (FE-SEM) and transmission electron microscopic (TEM)), BET surface area and diffuse reflectance spectral (DRS) analyses were carried out to characterize the formed product. The effects of experimental parameters on the microstructural and morphological behavior of Bi{sub 2}O{sub 3}/CeO{sub 2} composites were discussed. The semiconductor material as obtained was evaluated as a heterogeneous photocatalyst for the photolytic degradation of an azo dye in water and the degradation was found to follow pseudo-first-order rate kinetics. The study compares the rate constants of the new hybrid catalyst to a pristine Bi{sub 2}O{sub 3} and CeO{sub 2}, which has excellent catalytic properties under visible light irradiation for the degradation of Orange II dye.

36 MATERIALS SCIENCE↗

Annealing-free synthesis of carbonaceous Nb{sub 2}O{sub 5} microspheres by flame thermal method and enhanced photocatalytic activity for hydrogen evolution

Graphical abstract: Carbonaceous Nb{sub 2}O{sub 5} microspheres were firstly prepared by annealing-free flame thermal approach and its enhanced photocatalytic activity was demonstrated for hydrogen production. - Highlights: • Carbonaceous Nb{sub 2}O{sub 5} microspheres were prepared by annealing-free flame thermal approach in the first time. • Hydrolysis and incomplete combustion gave rise to Nb{sub 2}O{sub 5} incorporated with carbon. • Carbon species act as surface sensitizer to enhance photocatalytic activity. • It is possible to extend the strategy to develop various other metal oxides. - Abstract: An annealing-free synthesis of carbonaceous Nb{sub 2}O{sub 5} photocatalyst via a one-step flame assisted pyrolysis approach was proposed for the first time. Nearly amorphous carbonaceous Nb{sub 2}O{sub 5} microspheres were obtained directly through the facile and waste-free method. The presence of carbonate species was confirmed by means of EDS, XPS, BET and TEM. Both FT-IR and Raman analysis further revealed the existence form of carbon residuals for the resulted sample. UV–vis diffuse reflectance spectra showed the strong absorption of visible light and narrowed band gap for the carbon modified Nb{sub 2}O{sub 5}. On account of the vital role that carbon played in efficient electron-hole separation and light absorption, the hydrogen generation rate was 2.7 times that of the annealed and commercial Nb{sub 2}O{sub 5} samples. Further calcination can foster the crystallinity and expand specific surface area but lower the photocatalytic performance of as-prepared Nb{sub 2}O{sub 5} because of the elimination of carbon species. This work provides a new strategy for the preparation of carbonaceous Nb{sub 2}O{sub 5} candidates with enhanced photocatalytic activity.

36 MATERIALS SCIENCE↗

Easily separable N-doped ZnO microspheres with high photocatalytic activity under visible light

Highlights: • N-doped ZnO microspheres are successfully prepared for environmental photocatalysis. • N doping is responsible for the highly improved photocatalytic activity. • The microspheres are easily separated from the suspension system by sedimentation. - Abstract: Here, two strategies are simultaneously applied to ZnO for easy separation of the photocatalyst particles by forming micron-sized spheres and for extension of the spectral response into the visible region by nitrogen doping. The prepared nitrogen-doped ZnO microspheres show highly improved photocatalytic activity for the degradation of humic acid (HA), a complex refractory organic compound, under visible light. Substitutional and interstitial doping of nitrogen are behind the improved visible light absorption and photocatalytic activity. Using 1 g/L of N-doped ZnO with urea/Zn molar ratio of 3, 95.4% of HA with an initial concentration of 5 mg/L can be degraded within 80 min of visible light irradiation of 122 mW/cm{sup 2}. Under identical experimental conditions, almost complete mineralization of HA is achieved within 12 h. Holes and hydroxyl radicals are mainly responsible for the degradation of HA. Significant reduction of toxicity of the photocatalytically treated HA solution is realized within 9 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Mass Loading of Flower-like Ni-MoS 2 microspheres Toward Efficient Intercalation pseudocapacitive Electrode

This work reports the exploration of intercalation pseudocapacitance in a thicker electrode of flowerlike Ni-doped MoS 2 microspheres that features a mass loading of ~10 mg/cm 2 without sacrificing the gravimetric capacitance (~425 F/g at 5 mV/s). Integration of Ni atoms into MoS 2 microspheres not only stabilized the structural integrity but also ameliorated the rapid intercalation and deintercalation of electrolyte ions even at a commercial-level mass loading. The energy instability by Ni doping significantly changed the local bonding behavior and the overall electronic structure of MoS 2 , facilitating the breaking of the MoS 2 layer and generation of more active edge sites, which are responsible for faster reaction kinetics. The experiments attribute the overall capacitance enhancement in (Mo-Ni)S 2 to the increased rate of electrolyte ion insertion and extraction, which is confirmed by b-values close to 0.5, at different potentials, indicating that the current response predominantly depends on the diffusive mechanism for both MoS 2 and Ni-MoS 2 thicker electrodes. The symmetric device constructed with Ni-MoS 2 microspheres exhibited a capacitance value of 101 F/g in 1 mV/s, for which the energy density is 9 Wh/kg, as well as attained an outstanding cycling stability of 10000 cycles with 60% retention at 2 A/g. In addition to providing insights into the development of 2D TMDs, this work explores the design of robust and highly efficient intercalation electrode material for electrochemical energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequestration, fluorometric detection, and mass spectroscopy analysis of lanthanide ions using surface modified magnetic microspheres for microfluidic manipulation.

Several methods for rapid sequestration, fluorometric detection, and the subsequent mass spectroscopic analysis of lanthanide ions using surface modified polystyrene magnetic microspheres are demonstrated. Mixed-ligand antenna complexes of Eu{sup 3+} in which one of the ligands is attached to the surface of the microspheres have been used as a means for the sequestration, immobilization, and detection of these ions. Using the ion-exchange properties of these microspheres, this scheme has been extended to the detection of nonluminescent ions. The principles of these assays form the basis for operation of a portable microfluidic device for general analytical and nuclear forensics applications and indicate the manner in which the established methods of analytical chemistry, such as liquid-liquid extraction and ion-exchange chromatography, can be adapted for such miniature devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗