Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Electrochemical Kinetics and Performance of Layered Composite Cathode Material Li[Li0.2Ni0.2Mn0.6]O2

Lithium-rich, manganese-rich (LMR) layered composite cathode material Li[Li0.2Ni0.2Mn0.6]O2 has been successfully prepared by a co-precipitation method and its structure is confirmed by XRD characterization. The material delivers a high discharge capacity of 281 mAh g-1, when charged and discharged at a low current density of 10 mA g-1. However, significant increase of cell polarization and decrease of discharge capacity are observed at voltages below 3.5 V with increasing current densities. Galvanostatic intermittent titration technique (GITT) analysis demonstrates that lithium ion intercalation/de-intercalation reactions in this material are kinetically controlled by Li2MnO3 and its activated MnO2 component. The relationship between the electrochemical kinetics and rate performance as well as cycling stability has been systematically investigated. High discharge capacity of 149 mAh g-1 can be achieved at 10 C charge rate and C/10 discharge rate. The result demonstrates that the Li2MnO3 based material could withstand high charge rate (except initial activation process), which is very promising for practical applications. A lower discharge current density is preferred to overcome the kinetic barrier of lithium ion intercalation into MnO2 component, in order to achieve higher discharge capacity even at high charge rates.

Environmental Molecular Sciences Laboratory↗

Materials Data on MnCO3 by Materials Project

MnCO3 crystallizes in the monoclinic C2/c space group. The structure is one-dimensional and consists of four formaldehyde molecules and two MnO2 ribbons oriented in the (0, 0, 1) direction. In each MnO2 ribbon, Mn2+ is bonded in a distorted square co-planar geometry to four equivalent O2- atoms. All Mn–O bond lengths are 1.91 Å. O2- is bonded in a water-like geometry to two equivalent Mn2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mn2O3 by Materials Project

Mn2O3 crystallizes in the triclinic P-1 space group. The structure is three-dimensional and consists of two MnO clusters; one MnO2 ribbon oriented in the (1, 1, 1) direction; and one Mn2O3 framework. In each MnO cluster, there are two inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.41 Å) and one longer (1.61 Å) Mn–O bond length. In the second Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to one O2- atom. The Mn–O bond length is 1.90 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the second O2- site, O2- is bonded in a single-bond geometry to one Mn3+ atom. In the MnO2 ribbon, there are three inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.76–2.01 Å. In the second Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.87 Å. In the third Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 2.01 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to one Mn3+ atom. In the second O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the third O2- site, O2- is bonded in a 1-coordinate geometry to one Mn3+ atom. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to two Mn3+ atoms. In the Mn2O3 framework, there are fifteen inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Mn–O bond distances ranging from 2.31–2.63 Å. In the second Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.82–2.51 Å. In the third Mn3+ site, Mn3+ is bonded in a distorted square co-planar geometry to four O2- atoms. There is two shorter (1.65 Å) and two longer (2.00 Å) Mn–O bond length. In the fourth Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There is two shorter (1.83 Å) and two longer (2.12 Å) Mn–O bond length. In the fifth Mn3+ site, Mn3+ is bonded in a linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.72 Å. In the sixth Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.76 Å. In the seventh Mn3+ site, Mn3+ is bonded in a distorted linear geometry to four O2- atoms. There is two shorter (1.68 Å) and two longer (2.31 Å) Mn–O bond length. In the eighth Mn3+ site, Mn3+ is bonded in a linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.44 Å. In the ninth Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to three O2- atoms. There are a spread of Mn–O bond distances ranging from 1.97–2.29 Å. In the tenth Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.36–2.15 Å. In the eleventh Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.20–2.11 Å. In the twelfth Mn3+ site, Mn3+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.47 Å) and one longer (1.66 Å) Mn–O bond length. In the thirteenth Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to two O2- atoms. There are one shorter (2.01 Å) and one longer (2.40 Å) Mn–O bond lengths. In the fourteenth Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.70–2.03 Å. In the fifteenth Mn3+ site, Mn3+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.93–2.03 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms. In the second O2- site, O2- is bonded in a distorted single-bond geometry to two Mn3+ atoms. In the third O2- site, O2- is bonded in a 5-coordinate geometry to two Mn3+ atoms. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to one Mn3+ atom. In the fifth O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms. In the sixth O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to two Mn3+ atoms. In the eighth O2- site, O2- is bonded in a 1-coordinate geometry to two Mn3+ atoms. In the ninth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Mn3+ atoms. In the tenth O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the eleventh O2- site, O2- is bonded in a distorted bent 120 degrees geometry to three Mn3+ atoms. In the twelfth O2- site, O2- is bonded in a 2-coordinate geometry to three Mn3+ atoms. In the thirteenth O2- site, O2- is bonded in a 3-coordinate geometry to three Mn3+ atoms. In the fourteenth O2- site, O2- is bonded in a 3-coordinate geometry to two Mn3+ atoms. In the fifteenth O2- site, O2- is bonded in a 2-coordinate geometry to two Mn3+ atoms. In the sixteenth O2- site, O2- is bonded in a 1-coordinate geometry to four Mn3+ atoms. In the seventeenth O2- site, O2- is bonded in a 1-coordinate geometry to two Mn3+ atoms. In the eighteenth O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms.

36 MATERIALS SCIENCE↗

Mississippi State Biodiesel Production Project

Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese tallow tree and tung tree. High seed yields from these species are possible because, there stature allows for a third dimension in yield (up). Harvest regimes have already been worked out with tung, and the large seed makes shedding of the seed with tree shakers possible. While tallow tree seed yields can be mind boggling (12,000 kg seed/ha at 40% oil), genotypes that shed seed easily are currently not known. Efficient methods were developed to isolate polyunsaturated fatty acid methyl esters from bio-diesel. The hypothesis to isolate this class of fatty acids, which are used as popular dietary supplements and prescription medicine (OMACOR), was that they bind transition metal ions much stronger than their harmful saturated analogs. AgBF4 has the highest extraction ability among all the metal ions tested. Glycerol is a key product from the production of biodiesel. It is produced during the transesterification process by cleaving the fatty acids from the glycerol backbone (the fatty acids are used as part of the biodiesel, which is a fatty acid methyl ester). Glycerol is a non-toxic compound with many uses; however, if a surplus exists in the future, more uses for the produced glycerol needs to be found. Another phase of the project was to find an add-on process to the biodiesel production process that will convert the glycerol by-product into more valuable substances for end uses other than food or cosmetics, focusing at present on 1,3-propanediol and lactic acid.All three MSU cultures produced products at concentrations below that of the benchmark microorganisms. There was one notable isolate the caught the eye of the investigators and that was culture J6 due to the ability of this microorganism to co-produce both products and one in particularly high concentrations. This culture with more understanding of its metabolic pathways could prove a useful biological agent for the conversion of glycerol. Heterogeneous catalysis was examined as an alternative to overcome the disadvantages of homogeneous transesterification, such as the presence of salts in the glycerine phase and the continuous lost of catalyst. A maximum soy biodiesel yield of 85% was obtained by BaO in 14 minutes, whereas, PbO, MnO2, CaO and MgO gave a maximum yields of 84%, 80%, 78% and 66% respectively at 215°C. The overall reaction order of PbO, MnO2, BaO, CaO and MgO was found to be 1, 1, 3, 1 and 1 respectively. The highest rate constant was observed for BaO, which was 0.0085 g2.mole-2.min-1. The performance of biodiesel in terms of type (e.g., NOx, and CO) and quantity of emissions was tested using soy biodiesel, blends of biodiesel and ethanol, and differently aged diesel engines. It was determined that saturated methyl esters, and relatively high oxygen content in the fuel, caused by addition of ethanol, increased the NOx emissions from new diesel engines compared to petroleum diesel.

09 BIOMASS FUELS↗

2017 NEPP Tasks Update for Ceramic and Tantalum Capacitors

This presentation gives an overview of current NEPP tasks on ceramic and tantalum capacitors and plans for the future. It includes tasks on leakage currents, gas generation and case deformation in wet tantalum capacitors; ESR degradation and acceleration factors in MnO2 and polymer cathode capacitors. Preliminary results on the effect of moisture on degradation of reverse currents in MnO2 tantalum capacitors are discussed. Latest results on mechanical characteristics of MLCCs and modeling of degradation of leakage currents in BME capacitors with defects are also presented.

ceramic capacitors↗

Anomalous Transients in Chip Polymer Tantalum Capacitors

Contrary to MnO2 tantalum capacitors, transient processes in polymer tantalum capacitors after voltage application might result in anomalously high, ampere-level currents when a capacitor might appear as a short circuit for a time that is much greater than a transient time in MnO2 capacitors. In this work, conditions that cause anomalous transients in different types of polymer tantalum capacitors have been analyzed. Related phenomena that included increasing of capacitance and dissipation factors with voltage, parametric surge current test failures without damage to capacitors, and increasing leakage currents at low temperatures are described. It has been shown that anomalous transients increased substantially with applied voltage and with reduction of moisture content in capacitors caused by storage or operation at high temperatures and/or in vacuum. Different types of capacitors exhibited different level of transients and modification of conductive polymers or process of their application might decrease transient leakage currents substantially. For space applications, the risk of failures related to anomalous transients can be mitigated by special testing procedures to select parts with an acceptable level of transients and by voltage derating.

Tantalum Capacitors↗

Reliability Issues with PME and BME Ceramic Capacitors

Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 C. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.

degradation↗

Effect of Environments on Parametric Degradation in Polymer Tantalum Capacitors

Chip polymer tantalum capacitors (CPTCs) are more sensitive to environments compared to conventional, MnO2 cathode capacitors. Contrary to MnO2 capacitors, CPTCs can degrade with time of storage even in dry conditions, that might limit their use for space applications. Performance of CPTCs depends on the amount of moisture in the slug, and varies with time of storage after manufacturing. For this reason, characteristics of the parts and qualification testing should be carried out after preconditioning to stabilize moisture content. This work analyzes kinetics of moisture sorption and desorption in different types of CPTCs from three manufacturers. Variations of capacitance, dissipation factor, ESR, and leakage currents caused by exposure to humid, dry, and radiation environments are discussed. Examples of the effects of long-term exposure to vacuum and humid environments at 85%RH are presented. Temperature dependencies of the characteristic times of moisture diffusion allow for assessments of the bake-out times that are necessary to avoid pop-corning failures after soldering and to precondition parts before qualification testing.

Teverovsky, Alexander↗

Degradation of ESR in Polymer Tantalum Capacitors During High Temperature Storage

Replacement of MnO2 cathodes with conductive polymers in chip tantalum capacitors allows for a substantial reduction of the equivalent series resistance (ESR), improvement of frequency characteristics, and elimination of the possibility of ignition during failures. One of the drawbacks of chip polymer tantalum capacitors (CPTCs) is a relatively poor long-term stability at high temperatures. Due to degradation processes in conductive polymer materials, the existing quality assurance testing that has been developed for MnO2 capacitors is not sufficient to guarantee long-term stability of CPTCs. Insertion of CPTCs in hi-rel systems requires development of models that can predict degradation of the parts at operating conditions. In this work, variations of AC characteristics (capacitance, DF and ESR) in different types of capacitors from three manufacturers have been monitored during storage at temperatures from 100ºC to 175ºC for periods of up to 15,000 hours. Results show that the most sensitive to degradation parameter is ESR. Distributions of times to parametric failure during storage have been simulated using a Weibull-Arrhenius model that allowed for assessments of activation energies of degradation and prediction of times to failure at use temperatures. Mechanisms of degradation and the effect of packaging are discussed.

equivalent series resistance (ESR)↗

Kinetics of Moisture Sorption and Reverse Bias Degradation in Chip Tantalum Capacitors

Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 ºC. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.

Teverovsky, Alexander↗

Kinetics of Moisture Sorption and Reverse Bias Degradation in Chip Tantalum Capacitors

Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 C. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.

Teverovsky, Alexander↗

Breakdown and Self-healing in Tantalum Capacitors

Reliability of tantalum capacitors depends on the efficiency of self-healing that restores parts after breakdown. In this work, different types of polymer and MnO2 cathode capacitors have been tested for scintillation breakdown using a constant current stress (CCS) technique modified to allow detection of amplitudes and duration of current spikes. Monitoring of leakage currents with time under bias is used to assess the effect of scintillations. The appearance and composition of damaged sites have been examined after deprocessing and cross-sectioning. Thermal processes during scintillations have been analyzed, a mechanism of breakdown based on growth of conductive filaments in the dielectric suggested, and self-healing processes in polymer and MnO2 cathode capacitors discussed.

tantalum capacitor↗

Useful Life of Tantalum Capacitors

Currently, the major reliability characteristic of tantalum capacitors is the failure rate, which is a constant used to characterize random failures of electronic components. However, contemporary MnO2 and polymer tantalum capacitors have both infant mortality (IM) and wear-out (WO) failures. This requires assessments of the useful life of the parts that is limited by the time of inception of WO failures that can be determined using an adequate reliability model and results of highly accelerated life testing (HALT). In this presentation, a modified time dependent dielectric breakdown (TDDB) model is used to describe both IM and WO failures during HALT. Specifics of physical processes resulting in degradation and failures in polymer and MnO2 tantalum capacitors are discussed, and the increase of IM failures with the level of stress is explained. The model justifies exponential dependence of the acceleration factors on voltage and predicts higher values of the voltage acceleration constant for IM compared to WO failures.

tantalum capacitors↗

Potassium-Based alpha-Manganese Dioxide Nanofiber BinderFree Self-Supporting Electrodes: A Design Strategy for High Energy Density Batteries

This work minimizes electrode passive components and moves toward bridging the gap between actual and theoretical battery gravimetric energy density. Binder-free self-supporting (BFSS) cathodes were prepared from redox-active, high aspect ratio, potassium α-MnO2 nanofibers (K-OMS-2), eliminating the binder and current collector. The electroactive and structural element, K-OMS-2, was prepared using a scalable, moderate temperature, aqueous synthesis. The BFFS electrode approach allows fabrication of thick, high energy density electrodes with low impedance, with up to 10 fold improvement in delivered specific energy relative to conventional cathodes. This could enable high capacity large form factor cell designs, as required for applications demanding high energy content. In principle, this approach suggests a widely applicable paradigm for the construction of other BFFS electrodes through the targeted synthesis of other transition metal oxides with high aspect, fibrous morphologies. Introduction

25 ENERGY STORAGE↗

Novel Concept of pseudocapacitor using Stabilized Lithium Metal Powder and Non-lithiated Metal Oxide Electrodes in Organic Electrolyte

A concept of using two non-prelithiated metal oxides (e.g., MnO2, V2O5, and FeOx) in both positive and negative electrodes in organic Li-ion electrolytes has been proposed and tested to improve the energy density of pseudocapacitors. To take the advantages of this concept, additional lithium source is essential to provide lithium ions during the charge-discharge cycles. The stabilized lithium metal powder (SLMP) developed by FMC Corp., provides such an essential Li+ source. Here we report the first result of the symmetric pseudocapacitor using two non-prelithiated metal oxide (i.e., manganese oxide/carbon nanotube (MnO2/CNT) electrodes), with added SLMP in one of them. The capacitor using the SLMP added MnO2/CNT (positive) and pure MnO2/CNT (negative) electrode in 1.2 M LiPF6-EC:EMC electrolyte shows supercapacitive behaviors in 3.0 V voltage range. The addition of SLMP opens new opportunities of using the non-lithiated metal oxide electrodes in pseudocapacitors and hybrid electrochemical capacitors (ECs), which has not been possible before.

74 ATOMIC AND MOLECULAR PHYSICS↗

Non-destructive electrochemical diagnosis of failure mechanisms in aqueous zinc batteries

The early detection of secondary reactions that affect the life and performance of zinc manganese oxide batteries requires a shift from conventional time-consuming and often destructive procedures to rapid lifetime-predictive techniques. In this work, an electrochemical approach is employed to elucidate independent signatures for four common types of failure mechanisms in zinc manganese dioxide (Zn||MnO2) batteries—namely, the loss of zinc inventory, the loss of active material at the cathode, electrolyte depletion, and increased cell impedance. Our findings, specific to coin cell configurations, reveal that each induced failure mechanism can be distinctively modeled and identified based on responses from the rest voltage and columbic-efficiency data for prompt detection. For instance, electrolyte depletion response manifests a distinctive abrupt (>80 %) decrease in columbic efficiency (CE) and charge-rest voltage (Vc) while the discharge-rest voltage remained constant at ~1.3 V. Furthermore, electrolyte rejuvenation of the cell increased the CE to >95 % and restored Vc from ~0.3 to >1.7 V. Recovery experiments and reference performance tests demonstrated consistency between electrochemical descriptors and their associated failure mechanisms. Further, the outcomes of this work provide valuable insights and data models for some of the dominant failure mechanisms present in zinc manganese battery chemistries, which are beneficial to accelerated early-lifetime diagnosis and advancement of Zn batteries development.

25 ENERGY STORAGE↗

Zinc surface complexes on birnessite: A density functional theory study

Biogeochemical cycling of zinc is strongly influenced by sorption on birnessite minerals (layer-type MnO2), which are found in diverse terrestrial and aquatic environments. Zinc has been observed to form both tetrahedral (Zn{sup IV}) and octahedral (Zn{sup VI}) triple-corner-sharing surface complexes (TCS) at Mn(IV) vacancy sites in hexagonal birnessite. The octahedral complex is expected to be similar to that of Zn in the Mn oxide mineral, chalcophanite (ZnMn{sub 3}O{sub 7} {center_dot} 3H{sub 2}O), but the reason for the occurrence of the four-coordinate Zn surface species remains unclear. We address this issue computationally using spin-polarized Density Functional Theory (DFT) to examine the Zn{sub IV}-TCS and Zn{sup VI}-TCS species. Structural parameters obtained by DFT geometry optimization were in excellent agreement with available experimental data on Zn-birnessites. Total energy, magnetic moments, and electron-overlap populations obtained by DFT for isolated Zn{sup IV}-TCS revealed that this species is stable in birnessite without a need for Mn(III) substitution in the octahedral sheet and that it is more effective in reducing undersaturation of surface O at a Mn vacancy than is Zn{sub VI}-TCS. Comparison between geometry-optimized ZnMn{sub 3}O{sub 7} {center_dot} 3H{sub 2}O (chalcophanite) and the hypothetical monohydrate mineral, ZnMn{sub 3}O{sub 7} {center_dot} H{sub 2}O, which contains only tetrahedral Zn, showed that the hydration state of Zn significantly affects birnessite structural stability. Finally, our study also revealed that, relative to their positions in an ideal vacancy-free MnO{sub 2}, Mn nearest to Zn in a TCS surface complex move toward the vacancy by 0.08-0.11 {angstrom}, while surface O bordering the vacancy move away from it by 0.16-0.21 {angstrom}, in agreement with recent X-ray absorption spectroscopic analyses.

54 ENVIRONMENTAL SCIENCES↗