Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Electrodeposited Zinc-based Films as Anodes for Aqueous Zinc Batteries

Zinc-based batteries have attracted extensive attention in recent years, due to high safety, high capacities, environmental friendliness, and low cost compared to lithium ion batteries. However, the zinc anode suffers primarily from dendrite formation as a mode of failure in the mildly acidic system. Herein, we report on electrochemically deposited zinc (ED Zn) and copper-zinc (brass) alloy anodes, which are critically compared with a standard commercial zinc foil. The film electrodes are of commercially relevant thicknesses (21 and 25µM). The electrodeposited zinc-based anodes exhibit low electrode polarization (~0.025V) and stable cycling performance in 50 cycle consecutive experiments from 0.26-10 mA cm-2 compared to commercial Zn foil. Coulombic efficiencies at 1 mA cm-2 were over 98% for the electrodeposited zinc-based materials and were maintained for over 100 cycles. Furthermore, full cells with an electrodeposited Zn/brass anode, EMD MnO2 cathode, in 1M ZnSO4 + 0.1M MnSO4 delivered capacities of 96.3, and 163 mAh g-1, respectively, at a 100 mA g-1 compared to 92.1 mAh g-1 for commercial Zn. The zinc-based anodes also show better rate capability, delivering full cell capacities of 35.9 and 47.5 mAh g-1 at high current of up to 3 A g-1. Lastly, the electrodeposited zinc-based anodes show enhanced capacity for up to 100 cycles at 100 mA g-1, making them viable anodes for commercial use.

Fayette, Matthew R.↗

Collection of Lanthanides and Actinides from Natural Waters with Conventional and Nanoporous Sorbents

Effective collection of trace-level lanthanides and actinides is advantageous for recovery and recycling of valuable resources, environmental remediation, chemical separations and in-situ monitoring. Using isotopic tracers, we have evaluated a number of conventional and nanoporous sorbent materials for their ability to capture and remove selected lanthanides (Ce and Eu) and actinides (Th, Pa, U, and Np) from fresh and salt water systems. In general, the nanostructured materials demonstrated a higher level of performance and consistency. Nanoporous silica surface modified with 3,4- hydroxypyridinone provided excellent collection and consistency in both river water and seawater. The MnO2 materials, particular the high surface area small particle material also demonstrated good performance. Other conventional sorbents typically performed at the levels below the nanostructured sorbents and demonstrate a larger variability and matrix dependency.

Actinide, lanthanide, mesoporous, nanoporous, mang↗

Reversible aqueous zinc/manganese oxide energy storage from conversion reactions

Rechargeable aqueous batteries are attracting growing interest for energy storage due to their low cost and high safety. Fundamental understanding of highly reversible aqueous reactions is critical for building high-performance batteries. Herein, we studied the reversibility of Zn/MnO2 battery chemistry in mild aqueous MnSO4 electrolytes. α-MnO2 nanofibers were used as a high performance cathode. Our study provides good evidence for a conversion reaction mechanism through reversible formation of short nanorods and nanoparticle aggregates. This reversible conversion reaction provides an operating voltage of 1.44 V, high capacity of 285 mAh g-1, excellent rate and capacity retention of 92% after 5000 cycles. Zn metal anode also shows high reversibility in the mild aqueous MnSO4 electrolytes. The highly reversible and stable chemistries in aqueous Zn/MnO2 batteries open new opportunity for energy storage technologies with potentially high energy density, high safety, and low cost.

Environmental Molecular Sciences Laboratory↗

Spatial and chemical heterogeneity in aqueous Zn/MnO 2 batteries: role of Zn and Mn containing complexes

Aqueous Zn/MnO 2 batteries are a promising, safe alternative for grid-scale energy storage, owing to their environmentally safe and low-cost nature. The dissolution–deposition reaction mechanism in a mild aqueous pH regime has recently gained significance due to its relevance in battery design. Comprehending both the specific locations and the way reaction progresses is crucial for efficient batteries. This study demonstrates that Zinc Hydroxy Sulfate (ZHS) formed during discharge primarily near the dissolved MnO2 particles. Acting as a host for charge reactants in subsequent cycles, the charge product morphology was visualized using operando X-ray fluorescence microscopy. After ∼400 hours of cycling, capacity fade was linked to the formation of a Zn–Mn core–shell phase which is attributed to an irreversible core phase in the electrode, visualized through three-dimensional chemical mapping. Altogether, this research underscores the importance of understanding local morphological evolution in designing electrodes and chemistries for advanced grid-scale energy storage technologies.

36 MATERIALS SCIENCE↗

Comparative c-type cytochrome expression analysis in Shewanella oneidensis strain MR-1 and Anaeromyxobacter dehalogenans strain 2CP-C grown with soluble and insoluble oxidised metal electron acceptors

The genomes of Shewanella oneidensis strain MR-1 and Anaeromyxobacter dehalogenans strain 2CP-C encode 40 and 69 putative c-type cytochrome genes, respectively. Deletion mutant and biochemical studies have assigned specific functions to a few c-type cytochromes involved in electron transfer to oxidised metals in Shewanella oneidensis strain MR-1. Although promising, the genetic approach is limited to gene deletions that produce a distinct phenotype, and organism for which a genetic system is available. To more comprehensively investigate and compare c-type cytochrome expression in Shewanella oneidensis strain MR-1 and Anaeromyxobacter dehalogenans strain 2CP-C, proteomic measurements were used to characterise lysates of cells grown with soluble Fe(III) (as ferric citrate) and insoluble Mn(IV) (as MnO2) as electron acceptors. Strain MR-1 expressed 19 and 20, and strain 2CP-C expressed 27 and 25 c-type cytochromes when grown with Fe(III) and Mn(IV), respectively. The majority of c-type cytochromes (77% for strain MR-1 and 63% for strain 2CP-C) were expressed under both growth conditions; however, the analysis also revealed unique c-type cytochromes that were specifically expressed in cells grown with soluble Fe(III) or insoluble Mn(IV). Proteomic characterisation proved to be a promising approach for determining the c-type cytochrome complement expressed under different growth conditions, and will help elucidating the specific functions of more c-type cytochromes that are the basis for Shewanella and Anaeromyxobacter respiratory versatility.

Anaeromyxobacter dehalogenans strain 2CP-C↗

Electrokinesis is a microbial behavior that requires extracellular electron transport

Shewanella species are widespread in nature, enjoying a cosmopolitan distribution in marine,freshwater, sedimentary and soil environments (1), and have attracted considerable attention in recent years because of their ability to reduce an extensive number of different electron 3 acceptors, including the solid (oxy)hydroxides of iron and manganese, such as Fe(OH)3 and MnO2, using one or more proposed mechanisms of extracellular electron transport (EET) (2, 3). The EET ability of Shewanella species is consistent with their ability to generate electric current in microbial fuel cells in the absence of exogenous electron shuttles (4). Various strategies of extracellular electron transfer have been proposed in metal-reducing microbes, including naturally-occurring (2) or biogenic (5-7) soluble mediators that ‘shuttle’ electrons from cells to acceptors, as well as direct transfer using multiheme cytochromes located on the cell exterior (8) and transfer via conductive nanowires (9-11). S. oneidensis MR-1 features several proteins that are involved with the transport of electrons to the exterior of the cell where they play an important role with regard to the reduction of solid electron acceptors such as metal oxides. These include two outer-membrane decaheme c-type cytochromes (MtrC and OmcA), a membrane spanning protein (MtrB), and two periplasmic multi-heme c-type cytochromes (MtrA and CymA). Deletion of the genes encoding any of these proteins leads to phenotypes that are greatly inhibited with regard to metal-oxide reduction and current production in microbial fuel cells (MFCs) (12, 13). The mutation of genes that code for proteins involved in the movement of cytochromes to the outer membrane also results in loss of metal-reducing phenotypes (13). The shewanellae are highly motile, by virtue of a single polar flagellum, and individual S. oneidensis MR-1 cells have been tracked swimming at speeds of up to, and sometimes over, 100 μm/sec, although the average swimming speed of cells in a population is considerably lower (14). Research has also shown that S. oneidensis MR-1 also displays chemotactic responses to several soluble electron acceptors, including Fe(III) citrate (15, 16) and that the CheA-3 histidine protein kinase is required for this chemotactic behavior to be observed (14). Strain MR-1 has 4 also been shown to be very sensitive to the presence of electron acceptors. For example, strain MR-1 ceases motility after a short time in the absence of an electron acceptor; however motility can be restored upon the re-addition of an electron acceptor. Here we present data that suggest that the shewanellae exhibit a motility response not previously reported: we call it electrokinesis. This response occurs intermittently with the cells in proximity to a solid electron acceptor, such as a manganese oxide particle or the working electrode of an electrochemical cell, and motility is observed to increase after contact. In addition to increased swimming velocities, cells occasionally pause on the solid acceptor surface, then after brief contact (up to 1 second) the cells typically swim away in the opposite direction from which they approached. Electrokinesis is not a uniform response that can be observed in all cells, although if an electron shuttle is added, all cells rapidly become motile.

30 DIRECT ENERGY CONVERSION↗

Demethylation or Sorption? The Fate of Methylmercury in the Presence of Manganese Dioxide

Manganese oxide (MnO 2 ) amendments to mercury (Hg)-contaminated sediment have been shown to decrease methylmercury (MeHg) concentrations in sediment porewater. In the absence of solid-phase MeHg measurements, it is unclear whether the decreased porewater concentrations are due to inhibition of methylation, adsorption of the MeHg to the MnO 2 , demethylation of MeHg catalyzed by the MnO 2 , or some combination of these mechanisms. We conducted controlled laboratory experiments to determine whether MeHg losses from solution in the presence of amorphous MnO 2 are due to sorption or demethylation. In this work, we quantified MeHg in the dissolved phase and solid phase and found that no demethylation occurred. We used batch and isotherm experiments to determine MeHg sorption efficiency to MnO 2 in a variety of solutions with varying ionic strength and dissolved organic matter (DOM) concentration. Isotherms over an initial concentration range of 5–500 ng/L of MeHg showed no saturation effects. Increasing ionic strength from 0.012 M to 0.1 M produced relatively minor decreases in MeHg sorption. Increasing DOM concentrations from 0.64 to 16.4 mg C/L yielded substantial decreases in MeHg sorption. Under the experimental conditions, MnO2 is a less efficient MeHg sorbent compared to other sorbent materials, such as Thiol-SAMMS®, activated carbon, and biochar.

42 ENGINEERING↗

Hybrid Air-Electrode for Li/Air Batteries

A novel hybrid air-electrode is designed to improve the power density of Li/air batteries operating in an ambient environment. Three lithium insertion materials, MnO2, V2O5, and CFx (x = 1.0 to 1.15), are mixed with activated carbon to prepare different hybrid air-electrodes used in Li/air batteries. When compared with pure carbon-based Li/air batteries, the batteries using hybrid air-electrodes demonstrate significantly improved power capacities, especially for the CFx-based hybrid Li/air batteries. Because it is hydrophobic, CFx also facilitates the formation of air-flow channels in the carbon matrix, and alleviates air-electrode blocking problem during the discharge process. These hybrid air-electrodes provide a promising approach to improve the power density of Li/air batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of MgO during Chemical Magnesiation of Mg-Ion Battery Materials

Chemical magnesiation phenomena of α-MnO2, V2O5 and h-TiO2 using dibutyl magnesium has been studied using a long range (XRD) and a short range structural probe (NMR). XRD showed no significant phase transformations in the bulk whereas color change has been observed for TiO2 and V2O5 after treatment. 25Mg MAS NMR showed significant amorphous MgO formation for samples with color change which is suggestive of concomitant transition metal reduction on the surface. No significant bulk magnesiation due to intercalation has been observed for any of the oxides treated with dibutyl magnesium.

Wang, H.↗

Materials Data on MgMn4O8 by Materials Project

MgMn2O4(MnO2)2 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of two manganese hydroxide (mn(oh)2) molecules and one MgMn2O4 cluster. In the MgMn2O4 cluster, Mg2+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mg–O bond lengths are 1.83 Å. Mn+3.50+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.46 Å) and one longer (1.57 Å) Mn–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Mg2+ and one Mn+3.50+ atom. In the second O2- site, O2- is bonded in a distorted single-bond geometry to one Mn+3.50+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Mn(CO3)2 by Materials Project

MnO2(CO2)2 is Cyanogen Chloride-like structured and crystallizes in the monoclinic C2/c space group. The structure is zero-dimensional and consists of eight carbon dioxide molecules and four manganese hydroxide (mn(oh)2) molecules.

36 MATERIALS SCIENCE↗

The Catalysis of Uniform Metal Nanoparticles Deposited onto Oxide Supports: The Components of a Catalyst that Control Activity and Selectivity

Model materials consisting of metal nanoparticles loaded onto oxide supports were synthesized, characterized, and investigated in a number of catalytic chemical reactions. By varying the size, shape, and composition of nanoparticle, as well as the material used to support the nanoparticles, it was found that small changes to the catalyst can have enormous changes to the reaction activity and selectivity. Investigation of these carefully synthesized catalysts via in situ characterization, and reaction studies, leads to a deeper understanding of the molecular level parameters that govern catalysis. Through study of the properties of the nanoparticles it was discovered that nanoparticle size and shape have a dominant role in the chemoselective catalysis of furfural over platinum nanoparticles. When vapor phase furfural and hydrogen gas were passed over Pt nanoparticles ranging in size from 1.5 to 7.1 nm, the catalytic selectivity was found to be dominated by the size of the nanoparticle. Large nanoparticles promoted hydrogenation of furfural to furfuryl alcohol, while smaller nanoparticles favored decarbonylation to furan. The same size specific selectivity was found in the hydrogenative reforming (the transformation of hydrocarbons to branched isomers) of C6 hydrocarbons, in which Pt nanoparticle size controls isomerization selectivity. Methylcyclopentane was found to be extremely size dependent at lower temperatures (553 K). It was found that smaller sized nanoparticles favored isomer formation, while larger sizes catalyzed the aromatization reaction more efficiently. n-hexane was found to be much less dependent on particle size, but still showed an increase in isomerization with small particles over larger sized Pt nanoparticles. The composition of PtxRh1-x bimetallic nanoparticles was also studied. These catalysts were characterized under hexane reforming conditions with Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS), in order to find the actual surface atomic composition under real catalytic working conditions. By using AP-XPS and catalytic data in tandem, it was found that an optimum Rh loading occurred when the surface ensemble statistically favored one Rh atom surrounded by Pt atoms. By utilizing different oxide materials for catalytic supports the flow of charge can play a role in the reaction at the surface or interface in a phenomenon known as the strong metal-support interaction (SMSI). When Pt nanoparticles were loaded onto mesoporous supports made of Co3O4, NiO, MnO2, Fe2O3, and CeO2 it was found that their activity for carbon monoxide oxidation was greatly enhanced relative to the support alone or Pt loaded onto inert mesoporous silica. This finding demonstrates that the interface of the metallic Pt nanoparticle and the oxide 2 support is able to produce turnovers that are orders of magnitude higher than the two materials separately. When the same type of experiments were investigated with n-hexane as the reactant and macroporous Al2O3, TiO2, Nb2O5, Ta2O5, and ZrO2 were utilized as supports, it was found that the reaction selectivity was greatly altered depending on the catalytic support material. TiO2, Nb2O5, and Ta2O5 (all of which are strong Lewis acids) were found to be much more selective for isomer production than the standard SiO2 mesoporous silica supported Pt nanoparticle catalyst. Finally, an acidified mesoporous silica material was utilized as the support. This material was synthesized by using AlCl3 to modify the surface of mesoporous silica. This support was found to have no activity for hexane isomerization alone. However, when Pt nanoparticles were supported on the material, the activity and isomer selectivity in hexane reforming was increased several orders of magnitude as compared to the same nanoparticles supported on unmodified mesoporous silica. This dissertation builds on the existing knowledge of known concepts in catalysis science such as structure sensitive reactions, the metal-support interaction, and acid-base chemistry. The results show how small changes in the active sites of a catalyst can create large changes in the catalytic chemistry. This research demonstrates how careful material control, characterization and reaction study can help to elucidate the molecular level components necessary to design efficient catalysts.

Musselwhite, Nathan↗

Life on the Edge: Microbes in Rock Varnish

The newly discovered high concentrations of manganese on Mars open up new possibilities for habitability on that planet [1, 2]. On Earth, there is a close association between Mn deposits and the presence of Mn- and Fe- oxidizing microbes [3-7]; as such, Mn is considered a principal biosignature for Mars [8]. The most common terrestrial Mn-rich surface material on Earth is desert varnish, a dark, shiny coating on rocks in arid locations. Microorganisms occupy various niches within rock varnish, and it is probable that the concentration of Mn in many rock varnishes is mediated by microbial activity [6, 9, 10]; however, the relationship between microbes and varnish remains a source of long-standing controversy [11]. Do microorganisms drive the formation of varnish, oxidizing Mn and Fe to gain energy, or do they instead utilize varnish as a habitat? This long-standing question has important implications for our understanding of how life on Earth has evolved to capture and harness energy from the physical environment. Additionally, it will greatly influence the search on Mars for the signatures of life that may be present in rock varnish cannot be definitively identified on Mars without first being identified on Earth. Here we explored the microbial species and processes involved in the habitation of rock varnish and identified organic biosignatures that, in concert with trace element and mineralogy, could be used to distinguish the biogenic and abiogenic origins of terrestrial Mn-rich surfaces so that we may then apply the knowledge gained in this work to current Martian datasets from ChemCam. Each of these goals has important implications for our understanding of how life on Earth has evolved to capture and harness energy from the physical environment. A combinatorial experimental approach, utilizing microscopy, high-throughput DNA sequencing, culturing and physiological assays, were used to characterize the microbial communities inhabiting varnished rocks across the Western U.S. Microbial communities inhabiting varnish were shaped by both location (larger contribution) and rock type. However, we found that the unique varnish environment selects for a core group of radiation- and desiccation-tolerant microorganisms across landscapes and rock types. The bacteria comprising this core group include a who’s who of radiation resistant organisms including Rubrobacter spp., Deinococcus spp., Hymenobaceter spp., and Chroococcidiopsis spp. Among the fungi, potential lichen-forming members of the Lecanoromycetes and rock-inhabiting Dothideomycetes were common. Importantly, we found that two of the survival mechanisms employed by these microorganisms are likely key drivers of Mn oxide formation and the biogenesis of varnish. First, we showed that the key cyanobacteria inhabiting the varnish accumulate copious amounts of low molecular weight Mn2+-conjugates, that are critical for their ability to withstand the toxic effects of reactive oxygen species generated upon radiation exposure. Secondly, the microbial community inhabiting varnished rocks were found to be particularly adept at producing siderophores, which are high-affinity chelating compounds secreted by bacteria and fungi that serve to sequester Fe2+ (and Mn2+) from oxidizing environments for transport into cells as essential micronutrients for growth and survival. When tightly bound to organic ligands, Mn2+ is susceptible to oxidation to Mn3+-ligand under atmospheric oxygen and at slightly basic pH levels. Further, Mn3+-ligand can be oxidized to MnO2 (manganese oxide) when it comes into contact with reactive oxygen species (e.g., superoxide radical) formed during the photolysis of water during periods of high UV exposure. The data points towards a scenario whereby cyanobacterial biofilms, and associated radiation resistant, heterotrophic bacteria, comprise the central hub of the varnish community. These communities depend on light and water to slowly establish on the rock surface where they accumulate and concentrate Mn for survival. When the biofilms dry out, mineral rinds rich in Mn oxides form which serve as a habitat for the successive rounds of microbial growth and Mn oxide formation. Copious production and excretion of siderophores, which are extremely stable in the environment, coats the rock surface with a longlived catalyst for Mn oxidation. By discovering these two completely novel mechanisms for biogenic varnish formation, we have gained the underlying knowledge necessary to develop a suite of organic and inorganic biosignatures to distinguish biogenic and abiogenic origins of Mnrich surfaces on Earth or Mars.

59 BASIC BIOLOGICAL SCIENCES↗

Microbial Reduction of Manganese Oxides From AMD Solids for the Biomining of Critical Minerals / Rare Earth Elements

Abandoned Coal-Mine Drainage (AMD) is a source of critical minerals (CMs) that can be biomined to increase domestic CM production for the growing tech industry while mitigating current AMD hazardous waste. Pennsylvania has ~11,000 abandoned mines, ~500 of which are currently being treated with passive remediation systems (PRS), designed to increase the pH and precipitate AMD waste onsite. Manganese (Mn) that precipitates from AMD waste can co-precipitate with CMs, and the Mn and CMs will accumulate on the PRS solids over the treatment period. This results in high Mn/CM solids that could produce a valuable leachate if resolubilized. Mn reduction and solubilization can occur through microbial driven geochemical changes such as the acidification of the environment, and it is expected that Mn resolubilization will lead to a co-resolubilization of the CMs. Investigation and stimulation of this microbial resolubilization could result in an affordable CM release process that does not require chemical additives into the environment. However the microbial mechanisms that contribute to Mn resolubilization are poorly understood. Here, we have isolated bacteria capable of resolubilizing Mn from AMD PRS. Five of the bacteria isolates have been identified as Bacillus spp. and two as Corynebacterium spp. that ferment glucose to reduce/solubilize Mn MnO2 by acidogenesis. The bacterial isolates are also capable of solubilizing Mn and CMs (Y, Zr, Sb, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) from AMD PRS precipitated solids through their production of organic acids. Determining the microbial metabolism and genes involved in the resolubilization of manganese is crucial to optimize the biomining of CMs from AMD solid precipitants. This work addresses the growing need to develop novel CM recovery methods from domestic sources.

critical minerals↗

High waste loading glass formulation development for High-Mn HLW

One of the primary objectives of the work described herein was to develop and identify HLW glass compositions and glass forming additive blends that achieve high waste loadings and processing rates for high manganese HLW streams while maintaining acceptable glass properties. Another objective was to determine the effect of the form of manganese (MnO, MnO2, MnCO3) on feed processing properties, glass production rates, and product quality while vitrifying a high manganese HLW stream. This was accomplished through a combination of crucible-scale tests, vertical gradient furnace tests, and confirmation tests on a DM100 melter system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Antifoam Agent on Oxidative Leaching of Hanford Tank Sludge Simulants

Oxidative leaching of simulant tank waste containing an antifoam agent (AFA) to reduce the chromium content of the sludge was tested using permanganate as the oxidant in 0.25 M NaOH solutions. AFA is added to the waste treatment process to prevent foaming. The AFA, Dow Corning Q2-3183A, is a surface-active polymer that consists of polypropylene glycol, polydimethylsiloxane, octylphenoxy polyethoxy ethanol, treated silica, and polyether polyol. Some of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste slurries contain high concentrations of undissolved solids that would exhibit undesirable behavior without AFA addition. These tests were conducted to determine the effect of the AFA on oxidative leaching of Cr(III) in waste by permanganate. It has not previously been determined what effect AFA has on the permanganate reaction. This study was conducted to determine the effect AFA has on the oxidation of the chromium, plus plutonium and other criticality-related elements, specifically Fe, Ni and Mn. During the oxidative leaching process, Mn is added as liquid permanganate solution and is converted to an insoluble solid that precipitates as MnO2 and becomes part of the solid waste. Caustic leaching was performed followed by an oxidative leach at either 25°C or 45°C. Samples of the leachate and solids were collected at each step of the process. Initially, Battelle-Pacific Northwest Division (PNWD) was contracted by Bechtel National, Inc. to perform these further scoping studies on oxidative alkaline leaching. The data obtained from the testing will be used by the WTP operations to develop procedures for permanganate dosing of Hanford tank sludge solids during oxidative leaching. Work was initially conducted under contract number 24590-101-TSA-W000-00004. In February 2007, the contract mechanism was switched to Pacific Northwest National Laboratory (PNNL) operating Contract DE-AC05-76RL01830. In summary, this report describes work focused on determining the effect of AFA on chromium oxidation by permanganate with Hanford sludge simulant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Complete genome sequence of Ferrimonas balearica type strain (PAT T )

Ferrimonas balearica Rossello-Mora et al. 1996 is the type species of the genus Ferrimonas, which belongs to the family Ferrimonadaceae within the Gammaproteobacteria. The species is a Gram-negative, motile, facultatively anaerobic, non spore-forming bacterium, which is of special interest because it is a chemoorganotroph and has a strictly respiratory metabolism with oxygen, nitrate, Fe(III)-oxyhydroxide, Fe(III)-citrate, MnO(2), selenate, selenite and thiosulfate as electron acceptors. This is the first completed genome sequence of a member of the genus Ferrimonas and also the first sequence from a member of the family Ferrimonadaceae. The 4,279,159 bp long genome with its 3,803 protein-coding and 144 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

59 BASIC BIOLOGICAL SCIENCES↗

Electrochemical property of proton-conductive manganese dioxide for sensoring hydrogen gas concentration

A high-purity, ramsdellite-crystal type manganese dioxide (Koyanaka et al., 2005 [1]; Iikubo et al., 2010 [2]) was used for an electrolyte in a hydrogen gas sensor (Ueda et al., 2011 [3]). In this report, the electrochemical properties of the hydrogen gas sensor using electrolytes made of different crystal types of manganese dioxides, such as the ramsdellite-crystal type, a -crystal type, and a -crystal type were examined. The high purity, ramsdellite-crystal type manganese dioxide showed the conductivity from 7.1 10 5 S/cm (80 C) to 1.7 10 4 S/cm (25 C) under 85% relative humidity condition. This conductivity was probably based on the proton conduction on the MnO2 particles.

Ueda, Yoshikatsu↗