Search NASA⌕ Search

SEARCH · Search NASA

Results for “Monte Carlo Techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Model of an anisotropy solar proton event

The anisotropy of the particle distribution and its variation with time at 1 AU early in a solar cosmic-ray event can provide information on the pitch-angle scattering of the particles in the interplanetary medium. One proton event (7.6-55 MeV) is described in which the anisotropy remained large well into the decay of the omnidirectional intensity. A Monte Carlo technique which gives the pitch-angle distribution is employed to investigate two models put forward to explain the sustained anisotropy. It is shown that the observed event is consistent with a model in which the injection of particles at the sun reaches a peak 1.5 hours after flare maximum before decaying with an e-folding time of 7 hours. The uniform diffusion coefficient in this model corresponds to a classical mean free path of 1.6 AU.

Palmer, I. D.↗
NASA NTRS1975

Monte Carlo treatment of Lyman-alpha. II - Radiation in a spherical atmosphere

Intensity and state of polarization of solar L-alpha photons as they diffuse through an inhomogeneous, spherically symmetric, isothermal geocorona are theoretically determined. The fine structure of L-alpha and Doppler redistribution of frequencies are taken into account. The calculation use the Monte Carlo technique involving Stokes vectors. Comparison of the results with OGO-4 and OSO-4 observed intensities at an altitude of 650 km shows good agreement. Calculations of the polarization versus solar zenith angle show a residual polarization at large zenith angles which is mainly due to multiply scattered photons.

Modali, S. B.↗
NASA NTRS1975

Catastrophic rupture of lunar rocks - A Monte Carlo simulation

A computer model based on Monte Carlo techniques was developed to simulate the destruction of lunar rocks by 'catastrophic rupture' due to meteoroid impact. Energies necessary to accomplish catastrophic rupture were derived from laboratory experiments. A crater-production rate derived from lunar rocks was utilized to calculate absolute time scales. Calculated median survival times for crystalline lunar rocks are 1.9, 4.6, 10.3, and 22 m.y. for rock masses of 10, 100, 1000, and 10,000 g, respectively. Corresponding times of 6, 14.5, 32, and 68 million years are required before the probability of destruction reaches 0.99. These results are consistent with absolute exposure ages measured on returned rocks. Some results also substantiate previous conclusions that the catastrophic-rupture process is significantly more effective in obliterating lunar rocks than mass wasting by single-particle abrasion. The view is also corroborated that most rocks presently on the lunar surface either are exhumed from the regolith or are fragments of much larger boulders rather than primary ejecta excavated from pristine bedrock.

Hoerz, F.↗
NASA NTRS1975

Operations analysis (study 2.1): Program manual and users guide for the LOVES computer code

Information is provided necessary to use the LOVES Computer Program in its existing state, or to modify the program to include studies not properly handled by the basic model. The Users Guide defines the basic elements assembled together to form the model for servicing satellites in orbit. As the program is a simulation, the method of attack is to disassemble the problem into a sequence of events, each occurring instantaneously and each creating one or more other events in the future. The main driving force of the simulation is the deterministic launch schedule of satellites and the subsequent failure of the various modules which make up the satellites. The LOVES Computer Program uses a random number generator to simulate the failure of module elements and therefore operates over a long span of time typically 10 to 15 years. The sequence of events is varied by making several runs in succession with different random numbers resulting in a Monte Carlo technique to determine statistical parameters of minimum value, average value, and maximum value.

Wray, S. T., Jr.↗
NASA NTRS1976

Remarks on the overall distribution of hydrogen in the galactic disk

Several current problems concerning the overall distribution of hydrogen in the galaxy are discussed in general terms. These problems include the degree of saturation characterizing low-latitude emission observations of HI, and the optical-depth corrections to the derived column and volume densities; the amount of fine-scale velocity and spatial structure diluted by the instrumental limitations of the presently available surveys; and the general problem of detailed mapping of the HI in the galaxy. Comparison is made between the distribution of HI and that of CO and several other galactic tracers. The galactic disk as defined by atomic hydrogen has a diameter fully twice as large as that defined by the ionized and molecular states of hydrogen, as well as by other molecules, supernova remnants, pulsars, gamma radiation, synchroton radiation, and the youngest stars. It is also less confined to the galactic equator than most of the other constituents. The degree of small-scale structure apparent in the molecular observations is much greater than in the HI observations. Parameters describing the small-scale structure were determined using Monte Carlo techniques to simulate the observations.

Burton, W. B.↗
NASA NTRS1976

The SNAP 27 gamma radiation spectrum obtained with a Ge/Li/ detector

The pulse height distribution, obtained experimentally using a Ge(Li) detector, was employed to determine the photon emission rate characteristic of a PuO2 fuel source known as the SNAP 27 heat source. The selfshielding parameters of the photon emitter, the efficiency of the detector and the geometry of the experiment were utilized to determine the unscattered photon emission rate of the source and the unscattered flux spectrum at a certain specified distance from the source. For the scattered part of the flux spectrum a Monte Carlo technique was employed so that the total flux spectrum could be determined at any point in the radiation field. As a result of this work, a technique was developed to obtain the unfolded radiation spectrum of the SNAP 27 heat source.

Taherzadeh, M.↗
NASA NTRS1976

Energy storage possibilities of atomic hydrogen

Several recent experiments designed to produce and store macroscopic quantities of atomic hydrogen are discussed. The bulk, ground state properties of atomic hydrogen, deuterium, and tritium systems are calculated assuming that all pair interactions occur via the atomic triplet potential. The conditions required to obtain this system, including inhibition of recombination through the energetically favorable singlet interaction, are discussed. The internal energy, pressure, and compressibility are calculated applying the Monte Carlo technique with a quantum mechanical variational wavefunction. The system studied consisted of 32 atoms in a box with periodic boundary conditions. Results show that atomic triplet hydrogen and deuterium remain gaseous at 0 K; i.e., the internal energy is positive at all molar volumes considered.

Etters, R. D.↗
NASA NTRS1976

The computer simulation of automobile use patterns for defining battery requirements for electric cars

The modeling process of a complex system, based on the calculation and optimization of the system parameters, is complicated in that some parameters can be expressed only as probability distributions. In the present paper, a Monte Carlo technique was used to determine the daily range requirements of an electric road vehicle in the United States from probability distributions of trip lengths, frequencies, and average annual mileage data. The analysis shows that a daily range of 82 miles meets to 95% of the car-owner requirements at all times with the exception of long vacation trips. Further, it is shown that the requirement of a daily range of 82 miles can be met by a (intermediate-level) battery technology characterized by an energy density of 30 to 50 Watt-hours per pound. Candidate batteries in this class are nickel-zinc, nickel-iron, and iron-air. These results imply that long-term research goals for battery systems should be focused on lower cost and longer service life, rather than on higher energy densities

Schwartz, H.-J.↗
NASA NTRS1976

Energy distributions and radiation transport in uranium plasmas

An approximate analytic model, based on continuous electron slowing, has been used for survey calculations. Where more accuracy is required, a Monte Carlo technique is used which combines an analytic representation of Coulombic collisions with a random walk treatment of inelastic collisions. The calculated electron distributions have been incorporated into another code that evaluates both the excited atomic state densities within the plasma and the radiative flux emitted from the plasma.

Miley, G. H.↗
NASA NTRS1977

Multiple scattering in reflection nebulae. I - A Monte Carlo approach. II - Uniform plane-parallel nebulae with foreground stars. III - Nebulae with embedded illuminating stars

A method for calculating the surface brightness distribution on a plane-parallel reflection nebula of uniform density illuminated by a star located either in front of, behind, or arbitrarily inside the scattering medium is proposed. The Monte Carlo technique is used to find solutions to the radiative transfer problem. The scattering properties of the nebular particles are parameterized by the albedo for single scattering and a three-parameter analytic phase function. Calculations are then presented for the surface brightness distribution across the face of such nebulae with (1) a foreground star and (2) immersed stars. The calculations include the full effects of multiple scattering, are independent of a particular assumed grain material or size distribution, and are applicable to any wavelength region for which observations can be obtained.

Witt, A. N.↗
NASA NTRS1979

Report of the Ad Hoc Committee on the assessment of models of a wake shield environment around various spacecraft, Universities Space Research Association

Models depicting the ambient atmosphere which can overtake the spacecraft vacuum shield are presented. The subject areas discussed are: possible changing effects on the wake shield environment; possible utilization of the induced environmental contamination monitor; present state of the knowledge of the parameters used to describe the intermolecular collisions; the possibility of using simple models to describe the wake shield environment; possible errors associated with using kinetic theory to calculate that part of the atmosphere overtaking the shield; and a general assessment of the Monte Carlo techniques used to calculate the shield environment.

Wu, S. T.↗
NASA NTRS1978

Collisional evolution of mass-distribution spectrum of planetesimals

The early growth of planetesimals by mutual direct collisions is numerically simulated with a Monte Carlo technique to show how planetesimals with specific mass and velocity distributions evolve into a full-size planet. Four types of collisions are taken into account: rebound, erosion, catastrophic break-up, and coagulation. It is shown that evolution of mass-distribution spectrum is expressed by an inverse power relation. It is also suggested that whether or not a planetesimal can survive catastrophic collision is primarily dependent on mean relative velocity and mechanical properties of planetesimals. It is necessary for the early growth of rocky (basaltic) materials that mean relative velocity be much smaller than 0.1 km/s. Otherwise it is necessary to introduce something like nucleating agents (such as iron bodies which have plastic properties at temperatures higher than 200 K) for the formation of terrestrial planets.

Matsui, T.↗
NASA NTRS1979

Monte Carlo analysis of satellite debris footprint dispersion

A comprehensive study is performed to investigate satellite debris impact point dispersion using a combination of Monte Carlo statistical analysis and parametric methods. The Monte Carlo technique accounts for nonlinearities in the entry point dispersion, which is represented by a covariance matrix of position and velocity errors. Because downrange distance of impact is a monotonic function of debris ballistic coefficient, a parametric method is useful for determining dispersion boundaries. The scheme is applied in the present analysis to estimate the Skylab footprint dispersions for a controlled reentry. A significant increase in the footprint dispersion is noticed for satellite breakup above a 200,000-ft altitude. A general discussion of the method used for analysis is presented together with some typical results obtained for the Skylab deboost mission, which was designed before NASA abandoned plans for a Skylab controlled reentry.

Rao, P. P.↗
NASA NTRS1979

Radiative transfer in spherical shell atmospheres. III - Application to Venus

A method for partitioning the radiance emerging from a planetary atmosphere in proportion to the average number of scatterings in each atmospheric layer is applied to Venus in order to account for the various atmospheric levels which contribute to the radiance. A backward Monte Carlo technique is used to calculate core and continuum radiances for the P(16) line of the 8689-A CO2 band for various phase angles and colatitudes in a realistic model of the Venus atmosphere. Effective temperatures for the radiance are defined in two ways, both of which are shown to vary little with phase angles up to 120 deg, and fall rapidly beyond this point, in accordance with spectroscopic results. Temperature increases on the order of 7 K and 10 K are found going from the core of the line to the continuum for colatitudes of 90 and 20 deg, respectively, and the effective temperature is calculated to decrease from equator to pole. An effective optical depth is also defined, which, together with the concepts of effective temperature and effective height, is considered to bring a more fundamental understanding of the concept of level of line formation.

Kattawar, G. W.↗
NASA NTRS1980

A radiative transfer model for remote sensing of laser induced fluorescence of phytoplankton in non-homogeneous turbid water

A radiative transfer computer model was developed to characterize the total flux of chlorophyll a fluoresced or backscattered photons when laser radiation is incident on turbid water that contains a non-homogeneous suspension of inorganic sediments and phytoplankton. The radiative transfer model is based on the Monte Carlo technique and assumes that: (1) the aquatic medium can be represented by a stratified concentration profile; and (2) that appropriate optical parameters can be defined for each layer. The model was designed to minimize the required computer resources and run time. Results are presented for an anacystis marinus culture.

Venable, D. D.↗
NASA NTRS1980

Orbit IMU alignment: Error analysis

A comprehensive accuracy analysis of orbit inertial measurement unit (IMU) alignments using the shuttle star trackers was completed and the results are presented. Monte Carlo techniques were used in a computer simulation of the IMU alignment hardware and software systems to: (1) determine the expected Space Transportation System 1 Flight (STS-1) manual mode IMU alignment accuracy; (2) investigate the accuracy of alignments in later shuttle flights when the automatic mode of star acquisition may be used; and (3) verify that an analytical model previously used for estimating the alignment error is a valid model. The analysis results do not differ significantly from expectations. The standard deviation in the IMU alignment error for STS-1 alignments was determined to the 68 arc seconds per axis. This corresponds to a 99.7% probability that the magnitude of the total alignment error is less than 258 arc seconds.

Corson, R. W.↗
NASA NTRS1979

The probability distribution of the predicted CFM-induced ozone depletion

It is argued from the central limit theorem that the uncertainty in model predicted changes of the ozone column density is best represented by a normal probability density distribution. This conclusion is validated by comparison with a probability distribution generated by a Monte Carlo technique. In the case of the CFM-induced ozone depletion, and based on the estimated uncertainties in the reaction rate coefficients alone the relative mean standard deviation of this normal distribution is estimated to be 0.29.

Ehhalt, D. H.↗