Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numberical Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Solar proton events during solar cycles 19, 20, and 21

Earlier studies based on a single solar cycle had resulted in a sharp division of events into 'ordinary' and 'anomalously large' events. Two such entirely separate distributions imply two entirely separate acceleration mechanisms, one common and the other very rare. The sharp division is neither required nor justified by this larger sample. Instead the event intensity forms a smooth distribution for intensities up to the largest observed implying that any second acceleration mechanism cannot be rare. Also, a clear bimodal variation of annual integrated flux with solar cycle phase but no statistically significant tendency for the large events to avoid sunspot maximum is found. There is almost no relation between the maximum sunspot number in a solar cycle and the solar cycle integrated flux. It is also found that for annual sunspot numbers greater than 35 there is no relation whatsoever between the annual sunspot numbers and annual integrated flux.

Feynman, J.↗
NASA NTRS1974

Estimation of elastic aircraft parameters using the maximum likelihood method

The application of the maximum likelihood method to estimate the aerodynamic parameters of elastic flight vehicles in a symmetric flight condition is discussed. In this application, particular attention is directed toward the center of mass, elastic deformation, and sensor equations of motion. It is shown that the two major computational problems to be overcome are the inversion of large-sized matrices and the time-wise integration of a large number of linear, ordinary, differential equations.

Schwanz, R. C.↗
NASA NTRS1975

A new plasma regime in the distant geomagnetic tail

Observations are reported of an extensive region of low-energy plasma particles (LEP) flowing antisunward along the ordered field lines in the lobes of the geomagnetic tail at lunar distances. The flow was detected by three suprathermal ion detectors deployed on the lunar surface during the Apollo 12, 14, and 15 missions. This particle regime is found to be similar to the 'boundary layer' and 'plasma mantle' observed at smaller geocentric distances and to an interior flow region parallel to the magnetopause in the dayside magnetosphere. It is located exterior to the plasma sheet across essentially the entire tail and adjacent to the magnetopause on both the dawn and dusk sides of the magnetosphere. Variations in the integral flux, temperature, and number density are described. It is suggested that this flow and the three similar regimes are simply connected along the inner surface of the magnetopause and are, in fact, the same phenomenon.

Hardy, D. A.↗
NASA NTRS1981

Viscous-inviscid interaction for transonic wing-body configurations including wake effects

An existing three-dimensional compressible integral boundary-layer method was modified to account for mean dilatation effects, to model transition properly, and to provide better numerical stability near computational boundaries. Results of this method were compared against those from a three-dimensional finite-difference boundary-layer method on a difficult test case. An interaction procedure was developed to couple this integral method with a number of wing-alone and wing-body transonic potential codes to account for viscous effects. A strip wake model, including thickness and curvature effects, was developed and incorporated into this interaction procedure. Results from this procedure were compared against experimental data and results from previous procedures, on test cases where viscous effects were large.

Streett, C. L.↗
NASA NTRS1988

Supersonic combustion performance of hydrogen/hydrocarbon mixtures as determined by a nonintrusive temperature monitor

A simple and reliable OH absorption technique was developed and applied to measure path integrated temperature and OH number density in scramjet combustor hardware. The first series of measurements was made in premixed combustion products at the exit of a Mach 2 nozzle mounted on a hydrogen fueled vitiated heater. The second series of tests was conducted during supersonic combustion evaluation of hydrogen/hydrocarbon fuel mixtures. These measurements were made near the exit of a 48-inch long diverging supersonic combustor. The OH number density measurements indicated that both the nozzle and the combustor flow were not in equilibrium.

Northam, G. Burton↗
NASA NTRS1989

Analysis of an unswept propfan blade with a semiempirical dynamic stall model

The time history response of a propfan wind tunnel model with dynamic stall is studied analytically. The response obtained from the analysis is compared with available experimental data. The governing equations of motion are formulated in terms of blade normal modes which are calculated using the COSMIC-NASTRAN computer code. The response analysis considered the blade plunging and pitching motions. The lift, drag and moment coefficients for angles of attack below the static stall angle are obtained from a quasi-steady theory. For angles above static stall angles, a semiempirical dynamic stall model based on a correction to angle of attack is used to obtain lift, drag and moment coefficients. Using these coefficients, the aerodynamic forces are calculated at a selected number of strips, and integrated to obtain the total generalized forces. The combined momentum-blade element theory is used to calculate the induced velocity. The semiempirical stall model predicted a limit cycle oscillation near the setting angle at which large vibratory stresses were observed in an experiment. The predicted mode and frequency of oscillation also agreed with those measured in the experiment near the setting angle.

Reddy, T. S. R.↗
NASA NTRS1989

Aeroelastic analysis of prop fan blades with a semiempirical dynamic stall model

The time-history response of a propfan wind-tunnel model with dynamic stall was studied analytically. The response obtained from the analysis was compared with available experimental data. The governing equations of motion were formulated in terms of blade normal modes calculated using the COSMIC-NASTRAN computer code. The response analysis considered the blade plunging and pitching motions. The lift, drag, and moment coefficients for angles of attack below the static stall angle were obtained from a quasi-steady theory. For angles above static stall angles, a semiempirical dynamic stall model based on a correction to the angle of attack was used to obtain lift, drag, and moment coefficients. Using these coefficients, the aerodynamic forces were calculated at a selected number of strips, and integrated to obtain the total generalized forces. The combined momentum-blade element theory was used to calculate the induced velocity. The semiempirical stall model predicted a limit cycle oscillation near the setting angle at which large vibratory stresses were observed in an experiment. The predicted mode and frequency of oscillation also agreed with those measured in the experiment near this setting angle. The results also correlated well with the other published data that used a semiempirical dynamic stall model based on a synthesized procedure.

Reddy, T. S. R.↗
NASA NTRS1989

A model for atmospheric brightness temperatures observed by the special sensor microwave imager (SSM/I)

A closed-form mathematical model for the atmospheric contribution to microwave the absorption and emission at the SSM/I frequencies is developed in order to improve quantitative interpretation of microwave imagery from the Special Sensor Microwave Imager (SSM/I). The model is intended to accurately predict upwelling and downwelling atmospheric brightness temperatures at SSM/I frequencies, as functions of eight input parameters: the zenith (nadir) angle, the integrated water vapor and vapor scale height, the integrated cloud water and cloud height, the effective surface temperature, atmospheric lapse rate, and surface pressure. It is shown that the model accurately reproduces clear-sky brightness temperatures computed by explicit integration of a large number of radiosonde soundings representing all maritime climate zones and seasons.

Petty, Grant W.↗
NASA NTRS1990

Statistics of close approaches between asteroids and planets - Project Spaceguard

A data base of close approaches to the major planets has been generated via numerical integrations for a large number of planet-crossing asteroid orbits over the course of 200,000 yr; these data are then applied to such statistical theories as those of Kessler (1981) and Wetherill (1967). Attention is given to the orbits of the Toro-class asteroids, which violate the assumption of a lack of mean motion resonance locking between target planet and asteroid. A modified form of the Kessler theory is proposed which can address the problem of approaches between orbits that are either nearly coplanar or nearly tangent. A correlation analysis is used to test the assumption that the orbital elements of a planet-crossing orbit change solely due to close approaches.

Milani, A.↗
NASA NTRS1992

Internal shock interactions in propulsion/airframe integrated three-dimensional sidewall compression scramjet inlets

The advantages and design requirements of propulsion/airframe integration for high Mach number flight are studied in terms of the 3D sidewall compression scramjet inlet. The present work addresses in a parametric fashion the inviscid effects of leading edge sweep, sidewall compression, and inflow Mach number on the internal shock structure in terms of inlet compression and mass capture. The source of the Mach number invariance with leading edge sweep for a constant sidewall compression class of inlet is identified, and a previously undocumented spillage phenomenon in a constant effective wedge angle class of inlets is discussed.

Holland, Scott D.↗
NASA NTRS1993

Dust grain resonant capture: A statistical study

A statistical approach, based on a large number of simultaneous numerical integrations, is adopted to study the capture in external mean motion resonances with the Earth of micron size dust grains perturbed by solar radiation and wind forces. We explore the dependence of the resonant capture phenomenon on the initial eccentricity e(sub 0) and perihelion argument w(sub 0) of the dust particle orbit. The intensity of both the resonant and dissipative (Poynting-Robertson and wind drag) perturbations strongly depends on the eccentricity of the particle while the perihelion argument determines, for low inclination, the mutual geometrical configuration of the particle's orbit with respect to the Earth's orbit. We present results for three j:j+1 commensurabilities (2:3, 4:5 and 6:7) and also for particle sizes s = 15, 30 microns. This study extends our previous work on the long term orbital evolution of single dust particles trapped into resonances with the Earth.

Marzari, F.↗
NASA NTRS1993

Testing self-timed circuits using scan paths

Testing is an essential part of any digital system design and one that can be made much easier if testing is considered during the design process rather than after the system is complete. There are a number of techniques for integrating testability into system design, but many of these traditional testing methods used for synchronous circuits are not directly applicable to non-clocked asynchronous circuits. As a result, many asynchronous circuits do not employ design for testability techniques. A method of using the familiar model of scan paths modified to test self-timed systems are presented. Specifically, circuits designed using a library of self-timed modules to assemble systems with two-phase transition control and bundled data paths are considered. The method involves modifying these self-timed modules such that circuits designed from them have a built-in scan path.

Khoche, Ajay↗
NASA NTRS1996

The Prediction of Ducted Fan Engine Noise Via a Boundary Integral Equation Method

A computationally efficient Boundary Integral Equation Method (BIEM) for the prediction of ducted fan engine noise is presented. The key features of the BIEM are its versatility and the ability to compute rapidly any portion of the sound field without the need to compute the entire field. Governing equations for the BIEM are based on the assumptions that all acoustic processes are linear, generate spinning modes, and occur in a uniform flow field. An exterior boundary value problem (BVP) is defined that describes the scattering of incident sound by an engine duct with arbitrary profile. Boundary conditions on the duct walls are derived that allow for passive noise control treatment. The BVP is recast as a system of hypersingular boundary integral equations for the unknown duct surface quantities. BIEM solution methodology is demonstrated for the scattering of incident sound by a thin cylindrical duct with hard walls. Numerical studies are conducted for various engine parameters and continuous portions of the total pressure field are computed. Radiation and duct propagation results obtained are in agreement with the classical results of spinning mode theory for infinite ducts.

Boundary integral equation↗
NASA NTRS1995

Silicon Satellites: Picosats, Nanosats, and Microsats

Silicon, the most abundant solid element in the Earth's lithosphere, is a useful material for spacecraft construction. Silicon is stronger than stainless steel, has a thermal conductivity about half that of aluminum, is transparent to much of the infrared radiation spectrum, and can form a stable oxide. These unique properties enable silicon to become most of the mass of a satellite, it can simultaneously function as structure, heat transfer system, radiation shield, optics, and semiconductor substrate. Semiconductor batch-fabrication techniques can produce low-power digital circuits, low-power analog circuits, silicon-based radio frequency circuits, and micro-electromechanical systems (MEMS) such as thrusters and acceleration sensors on silicon substrates. By exploiting these fabrication techniques, it is possible to produce highly-integrated satellites for a number of applications. This paper analyzes the limitations of silicon satellites due to size. Picosatellites (approximately 1 gram mass), nanosatellites (about 1 kg mass), and highly capable microsatellites (about 10 kg mass) can perform various missions with lifetimes of a few days to greater than a decade.

Janson, Siegfried W.↗
NASA NTRS1958

Structural Design and Preliminary Evaluation of a Lightweight, Brazed, Air-Cooled Turbine Rotor Assembly

A lightweight turbine rotor assembly was devised, and components were evaluated in a full-scale jet engine. Thin sheet-metal airfoils were brazed to radial fingers that were an integral part of a number of thin disks composing the turbine rotor. Passages were provided between the disks and in the blades for air cooling. The computed weight of the assembly was 50 percent less than that of a similar turbine of normal construction used in a conventional turbojet engine. Two configurations of sheet-metal test blades simulating the manner of attachment were fabricated and tested in a turbojet engine at rated speed and temperature. After 8-1/2 hours of operation pieces broke loose from the tip sections of the better blades. Severe cracking produced by vibration was determined as the cause of failure. Several methods of overcoming the vibration problem are suggested.

Meyer, Andre J., Jr.↗
NASA NTRS2000

VLBI in the Deep Space Network: Challenges and Prospects

The purpose of this paper is to highlight the current status and prospects for VLBI in the NASA Deep Space Network (DSN). Although the prime purpose of the DSN is to support spacecraft operations and space research in deep space, this unique facility is also used on a noninterference basis with flight projects to support ground-based science experiments. The DSN VLBI capabilities are an integral part of a number of space- and ground-based projects. They include support of experiments at major radio astronomy VLBI networks (e.g., VLBA, EVN, APT), space VLBI co-observing, as well as VLBI geodesy and astrometry programs. The paper will describe for the potential DSN VLBI users 1) DSN VLBI objectives, 2) the current organizational structure and 3) current and projected capabilities.

Altunin, Valery I.↗
NASA NTRS2004

A Review of ETM-03 (A Five Segment Shuttle RSRM Configuration) Ballistic Performance

Marshall Space Flight Center and ATK Thiokol Propulsion worked together on the engineering design of a five-segment Engineering Test Motor (ETM-03), the world's largest segmented solid rocket motor. The data from ETM-03's static test have helped to provide a better understanding of the Reusable Solid Rocket Motor's (RSRM's) margins and the techniques and models used to simulate solid rocket motor performance. The enhanced performance of ETM-03 was achieved primarily by the addition of a RSRM center segment. Added motor performance was also achieved with a nozzle throat diameter increase and the incorporation of an Extended Aft Exit Cone (EAEC). Performance parameters such as web time, action time, head-end pressure, web time average pressure, maximum thrust, mass flow rate, centerline Mach number, pressure and thrust integrals were all increased over RSRM. In some cases, the performance increases were substantial. Overall, the measured data were exceptionally close to the pretest predictions.

McMillin, J. E.↗