Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Validation of the Electrical Properties of the ITER ICRF Antenna using Reduced-Scale Mock-Ups

Experimental measurements on reduced-scale mock-ups allow validating the electrical properties and RF numerical optimization of the ITER ICRF antenna. Frequency response in the different regions of the antenna is described and key parameters for performance improvement are given. Coupling is improved by acting on the front-face geometry (strap width, antenna box depth and vertical septa recess). The 4-port junction acts as a frequency filter and together with the service stub performs pre-matching in the whole frequency band. Influence of the Faraday screen on coupling is limited. The effect of voltage limitation on the maximum total radiated power is given. The importance of a good decoupling network and of grounding is emphasized. Finally the control of the antenna wave spectrum is performed by implementing feedback controlled load-resilient matching and decoupling options and control algorithms are tested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beam dynamics study of a 30 MeV electron linear accelerator to drive a neutron source

An experimental neutron facility based on 32 MeV/18.47 kW electron linac has been studied by means of PARMELA simulation code. Beam dynamics study for a traveling wave constant gradient electron accelerator is carried out to reach the preferential operation parameters (E = 30 MeV, P = 18 kW, dE/E < 12.47% for 99% particles). The whole linac comprises mainly E-gun, pre-buncher, buncher, and 2 accelerating columns. A disk-loaded, on-axis-coupled, 2π/3-mode type accelerating rf cavity is considered for this linac. After numerous optimizations of linac parameters, 32 MeV beam energy is obtained at the end of the linac. As high electron energy is required to produce acceptable neutron flux. The final neutron flux is estimated to be 5 × 10{sup 11} n/cm{sup 2}/s/mA. Future development will be the real design of a 30 MeV electron linac based on S band traveling wave.

43 PARTICLE ACCELERATORS↗

Simulation of a gigawatt level Ku-band overmoded Cerenkov type oscillator operated at low guiding magnetic field

We present the simulation results of a Ku-band overmoded Cerenkov type high power microwave oscillator. A guiding magnetic field as low as 0.6 T has been operated in the device. Overmoded slow wave structures with gradually tapered vanes are used in order to increase power capacity and the efficiency of beam-wave interaction. The drift cavity is adopted to enhance the beam-wave interaction of the device. After numerical optimization, the designed generator with an output microwave power of 1.2 GW, a frequency of 13.8 GHz, and a power conversion efficiency as high as 38% can be achieved, when the diode voltage and current are, respectively, 540 kV and 5.8 kA. The power compositions of TM{sub 0n} modes of the output microwave have been analyzed, the results of which show that TM{sub 01} mode takes over almost 95% of the power proportion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication of optical multilayer for two-color phase plate in super-resolution microscope

In super-resolution microscopy based on fluorescence depletion, the two-color phase plate (TPP) is an indispensable optical element, which can independently control the phase shifts for two beams of different color, i.e., the pump and erase beams. By controlling a phase shift of the erase beam through the TPP, the erase beam can be modulated into a doughnut shape, while the pump beam maintains the initial Gaussian shape. To obtain a reliable optical multiplayer (ML) for the TPP, we designed a ML with only two optical layers by performing numerical optimization. The measured phase shifts generated by the fabricated ML using interferometry correspond to the design values. The beam profiles in the focal plane are also consistent with theoretical results. Although the fabricated ML consists of only two optical layers, the ML can provide a suitable phase modulation function for the TPP in a practical super-resolution microscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low energy, high power hydrogen neutral beam for plasma heating

A high power, relatively low energy neutral beam injector was developed to upgrade of the neutral beam system of the gas dynamic trap device and C2-U experiment. The ion source of the injector produces a proton beam with the particle energy of 15 keV, current of up to 175 A, and pulse duration of a few milliseconds. The plasma emitter of the ion source is produced by superimposing highly ionized plasma jets from an array of four arc-discharge plasma generators. A multipole magnetic field produced with permanent magnets at the periphery of the plasma box is used to increase the efficiency and improve the uniformity of the plasma emitter. Multi-slit grids with 48% transparency are fabricated from bronze plates, which are spherically shaped to provide geometrical beam focusing. The focal length of the Ion Optical System (IOS) is 3.5 m and the initial beam diameter is 34 cm. The IOS geometry and grid potentials were optimized numerically to ensure accurate beam formation. The measured angular divergences of the beam are ±0.01 rad parallel to the slits and ±0.03 rad in the transverse direction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hybrid graphene/silicon integrated optical isolators with photonic spin–orbit interaction

Optical isolators are an important building block in photonic computation and communication. In traditional optics, isolators are realized with magneto-optical garnets. However, it remains challenging to incorporate such materials on an integrated platform because of the difficulty in material growth and bulky device footprint. Here, we propose an ultracompact integrated isolator by exploiting graphene's magneto-optical property on a silicon-on-insulator platform. The photonic nonreciprocity is achieved because the cyclotrons in graphene experiencing different optical spins exhibit different responses to counterpropagating light. Taking advantage of cavity resonance effects, we have numerically optimized a device design, which shows excellent isolation performance with the extinction ratio over 45 dB and the insertion loss around 12 dB at a wavelength near 1.55 μm. Featuring graphene's CMOS compatibility and substantially reduced device footprint, our proposal sheds light on monolithic integration of nonreciprocal photonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accurate and balanced anisotropic Gaussian type orbital basis sets for atoms in strong magnetic fields

In high magnetic field calculations, anisotropic Gaussian type orbital (AGTO) basis functions are capable of reconciling the competing demands of the spherically symmetric Coulombic interaction and cylindrical magnetic (B field) confinement. However, the best available a priori procedure for composing highly accurate AGTO sets for atoms in a strong B field [W. Zhu et al., Phys. Rev. A 90, 022504 (2014)] yields very large basis sets. Their size is problematical for use in any calculation with unfavorable computational cost scaling. Here we provide an alternative constructive procedure. It is based upon analysis of the underlying physics of atoms in B fields that allow identification of several principles for the construction of AGTO basis sets. Aided by numerical optimization and parameter fitting, followed by fine tuning of fitting parameters, we devise formulae for generating accurate AGTO basis sets in an arbitrary B field. For the hydrogen iso-electronic sequence, a set depends on B field strength, nuclear charge, and orbital quantum numbers. For multi-electron systems, the basis set formulae also include adjustment to account for orbital occupations. Tests of the new basis sets for atoms H through C (1 ≤ Z ≤ 6) and ions Li+, Be+, and B+, in a wide B field range (0 ≤ B ≤ 2000 a.u.), show an accuracy better than a few μhartree for single-electron systems and a few hundredths to a few mHs for multi-electron atoms. The relative errors are similar for different atoms and ions in a large B field range, from a few to a couple of tens of millionths, thereby confirming rather uniform accuracy across the nuclear charge Z and B field strength values. Residual basis set errors are two to three orders of magnitude smaller than the electronic correlation energies in multi-electron atoms, a signal of the usefulness of the new AGTO basis sets in correlated wavefunction or density functional calculations for atomic and molecular systems in an external strong B field

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Absolute calibration of the Lyman-α measurement apparatus at DIII-D

The LLAMA (Lyman-Alpha Measurement Apparatus) diagnostic was recently installed on the DIII-D tokamak [Rosenthal et al., Rev. Sci. Instrum. (submitted) (2020)]. LLAMA is a pinhole camera system with a narrow band Bragg mirror, a bandpass interference filter, and an absolute extreme ultraviolet photodiode detector array, which measures the Ly-α brightness in the toroidal direction on the inboard, high field side (HFS) and outboard, low field side (LFS). This contribution presents a setup and a procedure for an absolute calibration near the Ly-α line at 121.6 nm. The LLAMA in-vacuum components are designed as a compact, transferable setup that can be mounted in an ex situ vacuum enclosure that is equipped with an absolutely calibrated Ly-α source. The spectral purity and stability of the Ly-α source are characterized using a vacuum ultraviolet spectrometer, while the Ly-α source brightness is measured by a NIST-calibrated photodiode. The non-uniform nature of the Ly-α source emission was overcome by performing a calibration procedure that scans the Ly-α source position and employs a numerical optimization to determine the emission pattern. Nominal and measured calibration factors are determined and compared, showing agreement within their uncertainties. A first conversion of the measured signal obtained from DIII-D indicates that the Ly-α brightness on the HFS and LFS is on the order of 1020 Ph sr-1 m-2 s-1. The established calibration setup and procedure will be regularly used to re-calibrate the LLAMA during DIII-D vents to monitor possible degradation of optical components and detectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bayesian inferences of electrical current delivered to shocked transmission lines

Small radius Bdot measurements of electrical current delivered by pulsed power devices are routinely compromised by electrode/convolute plasmas endemic to multiterawatt transmission lines. Inferences of delivered current unaffected by these issues have recently been obtained by numerically optimizing consistency between model predictions and local experimental velocimetry data, but these are only unique for shockless velocity profiles. In the paper we describe a more general Bayesian method capable of inferring current despite the presence of shocks. Additionally, we describe uncertainty estimates and use of the technique on experimental data. This technique is the first to provide uncertainty estimates on the full current trace delivered to an inertial confinement fusion target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A novel approach to interface high-Q Fabry–Pérot resonators with photonic circuits

The unique benefits of Fabry–Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and time-keeping systems, it will be necessary to develop strategies to integrate compact Fabry–Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry–Pérot resonators with a silicon photonic circuit. This circuit interface produces a spatial separation of the incident and reflected waves, as required for on-chip Pound–Drever–Hall frequency locking, while also suppressing unwanted back reflections from the Fabry–Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.

Optics↗

Understanding plasma turbulence through exact coherent structures

Plasma turbulence is a key challenge in understanding transport phenomena in magnetically confined plasmas. This work presents a generalized framework to analyze plasma turbulence that utilizes periodic orbit theory. In periodic orbit theory, doubly periodic solutions (coherent structures) of the governing equation(s) serve as building blocks of the considered turbulent dynamics. To illustrate the concept and method, the particularly simple Kuramoto–Sivashinsky (referred to here as LMRT for the original authors: LaQuey, Mahajan, Rutherford, and Tang) trapped-ion mode toy model is used. By applying numerical optimization techniques to the LMRT equation, we extract coherent spacetime patterns that represent the library of allowable fundamental structures of the equation. These structures provide a framework to systematically describe turbulence as a composition of recurrent solutions, revealing an underlying order within chaotic plasma motion. Although illustrated here using the simplified LMRT model for clarity, this framework provides a general strategy that can be extended to more complex and realistic models of plasma turbulence, including gyrokinetic systems. This offers a new method for predicting and potentially controlling transport processes in fusion plasmas by providing a bridge between nonlinear dynamical systems theory and plasma physics in the form of a generalized framework with which to analyze and understand spatially extended nonlinear partial differential equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Periodic Korteweg–de Vries soliton potentials generate quasisymmetric magnetic field strength in a finite plasma- β equilibrium

Quasisymmetry (QS) is a hidden symmetry of the magnetic field strength, B , that enables effective confinement of charged particles in a fully three-dimensional (3D) toroidal plasma equilibrium. Such equilibria are typically modeled by the ideal magnetohydrostatic (MHS) equations. The nonlinear, overdetermined nature of the QS MHS equations severely complicates our understanding of the interplay between 3D shaping, equilibrium properties such as pressure and rotational transform, and B . Progress has been made through expansions near the magnetic axis; however, a more comprehensive theory is desirable. Using a combination of analysis and regression on a large dataset of numerically optimized quasisymmetric stellarators, we demonstrate that there is a hidden lower dimensionality of B on a magnetic flux surface with connections to the theory of periodic solitons. We show that B on a flux surface is determined by three or at most four flux functions, each of which determines a critical value of the derivative of B along the field line. While being consistent with the near-axis models, our results are global and hold even on the last closed flux surface.

Differential geometry↗

Augmenting a Simulation Campaign for Hybrid Computer Model and Field Data Experiments

The Kennedy and O’Hagan (KOH) calibration framework uses coupled Gaussian processes (GPs) to meta-model an expensive simulator (first GP), tune its “knobs” (calibration inputs) to best match observations from a real physical/field experiment and correct for any modeling bias (second GP) when predicting under new field conditions (design inputs). There are well-established methods for placement of design inputs for data-efficient planning of a simulation campaign in isolation, that is, without field data: space-filling, or via criterion like minimum integrated mean-squared prediction error (IMSPE). Analogues within the coupled GP KOH framework are mostly absent from the literature. Here, in this study, we derive a closed form IMSPE criterion for sequentially acquiring new simulator data for KOH. We illustrate how acquisitions space-fill in design space, but concentrate in calibration space. Closed form IMSPE precipitates a closed-form gradient for efficient numerical optimization. We demonstrate that our KOH-IMSPE strategy leads to a more efficient simulation campaign on benchmark problems, and conclude with a showcase on an application to equilibrium concentrations of rare earth elements for a liquid–liquid extraction reaction.

97 MATHEMATICS AND COMPUTING↗

Ion-temperature-gradient stability near the magnetic axis of quasisymmetric stellarators

Abstract The stability of the ion-temperature gradient mode in quasisymmetric stellarators is assessed. This is performed using a set of analytical estimates together with linear gyrokinetic simulations. The peak growth rates, their corresponding real frequencies and wave-vectors are identified. A comparison is made between a first-order near-axis expansion model and eleven realistic designs obtained using numerical optimization methods. It is found that while the near-axis expansion is able to replicate the growth rates, real frequencies and perpendicular wave-vector at the inner core (both using simplified dispersion relations and first-principle gyrokinetic simulations), it leads to an overestimation of the growth rate at larger radii. An approximate analytic solution of the ITG dispersion relation for the non-resonant limit suggests growth rates could be systematically higher in quasi-axisymmetric (QA) configurations compared to quasi-helically (QH) symmetric ones. However except for very close to the axis, linear gyrokinetic simulations do not show systematic differences between QA and QH configurations.

Physics↗

Modeling non-equilibrium discharge and validating transient plasma characteristics at above-atmospheric pressure

Non-equilibrium plasma generated from positive-pulsed nanosecond electrical discharges into desiccated air is simulated in this paper using a multi-dimensional, multi-physics plasma solver. A pin-to-pin electrode configuration is used with a fixed 5.2 mm gap spacing. Peak pulse voltages range between 10.2 and 22.5 kV. Care is taken to match the exact electrode profile from the experiments, and adjust the electron collision frequency so that breakdown limits closely match those from corresponding experimental results. The optimized numerical simulations predict qualitative streamer structure that is in close agreement with experimental observations. Quantitative measurements of atomic oxygen at the anode tip and qualitative estimates of streamer gas heating are closely matched by simulations. The model results are used to provide insight into the spatial and temporal development of the transient plasma. Furthermore, the work performed in this paper delivers a numerical tool that can be extremely useful to link the post-discharge plasma properties to low-temperature plasma ignition mechanisms that are of great interest for the automotive industry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Empirical estimation of weather-driven yield shocks using biophysical characteristics for U.S. rainfed and irrigated maize, soybeans, and winter wheat

Agricultural yields are highly susceptible to changes in weather system patterns, including both annual and sub-annual changes in temperature and precipitation. Understanding the impacts of future changes in meteorological variables on crop yields have been widely studied in both empirical and process-based models. This work presents a structural econometric approach that combines historical weather data with information about the biophysical growth cycles of maize, winter wheat, and soy to predict the year-to-year yield responses for rainfed crops. Modeled soil moisture and temperature are taken as key predictors, which allows testing the fitted rainfed model’s ability to predict irrigated yields by assuming irrigation produces the numerically optimal level of soil moisture. This approach is grounded in known biophysical processes, which improves confidence in the model predictions. It produces estimates of interannual variability in yields, which enable study of the effects of extreme events on agricultural productivity. Finally, it enables prediction of the potential impacts of changing weather patterns on irrigated crops in areas that are currently primarily rainfed. We present the results of the empirical model, fitted with rainfed data; out-of-sample validation on irrigated crops; and projections of yield shocks under multiple future climate scenarios. Under a bias-corrected GFDL RCP8.5 scenario, this approach predicts average yield change, relative to 2006-2020 average yields, across U.S. counties in the 2040-2060 period of -16.9% and -13.4% for rainfed and irrigated maize, of -19.1% and -18.4% for rainfed and irrigated soy, and of -4.0% and -2.0% for rainfed and irrigated winter wheat. And in the 2070-2090 period of -30.3% and -28.8 % for rainfed and irrigated maize, of -33.1% and -32.8% for rainfed and irrigated soy, and of -6.5% and -5.2%for rainfed and irrigated winter wheat.

54 ENVIRONMENTAL SCIENCES↗

Exploring nonmultiplicativity in the geometric measure of entanglement

The geometric measure of entanglement (GME) quantifies how close a multipartite quantum state is to the set of separable states under the Hilbert-Schmidt inner product. The GME can be nonmultiplicative, meaning that the closest product state to two states is entangled across subsystems. In this work, we explore the GME in two families of states: those that are invariant under bilateral orthogonal (𝑂⊗𝑂) transformations, and mixtures of singlet states. In both cases, a region of GME nonmultiplicativity is identified around the antisymmetric projector state. We employ state-of-the-art numerical optimization methods and models to quantitatively analyze nonmultiplicativity in these states for 𝑑=3. Here, we also investigate a constrained form of GME that measures closeness to the set of real product states and show that this measure can be nonmultiplicative even for real separable states.

Quantum correlations in quantum information↗

Non-Gaussian photonic state engineering with the quantum frequency processor

Non-Gaussian quantum states of light are critical resources for optical quantum information processing, but methods to generate them efficiently remain challenging to implement. Here we introduce a generic approach for non-Gaussian state production from input states populating discrete frequency bins. Based on controllable unitary operations with a quantum frequency processor, followed by photon-number-resolved detection of ancilla modes, our method combines recent developments in both frequency-based quantum information and non-Gaussian state preparation. Leveraging and refining the K-function representation of quantum states in the coherent basis, we develop a theoretical model amenable to numerical optimization and, as specific examples, design quantum frequency processor circuits for the production of Schrödinger cat states, exploring the performance tradeoffs for several combinations of ancilla modes and circuit depth. Our scheme provides a valuable framework for producing complex quantum states in frequency bins, paving the way for single-spatial-mode, fiber-optic-compatible non-Gaussian resources.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗