Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORBITAL SIMULATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Relative error covariance analysis techniques and application

A technique for computing the error covariance of the difference between two estimators derived from different (possibly overlapping) data arcs is presented. The relative error covariance is useful for predicting the achievable consistency between Kalman-Bucy filtered estimates generated from two (not necessarily disjoint) data sets. The relative error covariance analysis technique is then applied to a Venus Orbiter simulation.

Wolff, Peter, J.↗
NASA NTRS1990

Hubble space telescope six-battery test bed

A test bed for a large space power system breadboard for the Hubble Space Telescope (HST) was designed and built to test the system under simulated orbital conditions. A discussion of the data acquisition and control subsystems designed to provide for continuous 24 hr per day operation and a general overview of the test bed is presented. The data acquisition and control subsystems provided the necessary monitoring and protection to assure safe shutdown with protection of test articles in case of loss of power or equipment failure over the life of the test (up to 5 years).

Pajak, J. A.↗
NASA NTRS1990

Space Station payload scheduling

A solution algorithm is presented for the scheduling of payloads for NASA's proposed Space Station. The payload scheduling problem possesses some unique and unusual features that cannot be adequately addressed using static scheduling theory. The solution algorithm is demonstrated with a hypothetical Space Station example that involves 10 payloads and 3 crewmembers with a varied skill profile. A constrained version of the algorithm is compared with three other scheduling heuristics through use of the Space Station Operations Model which can simulate orbital activities. The constrained solution algorithm outperforms the three other scheduling heuristics in the minimization of makespan.

Luxhoj, James T.↗
NASA NTRS1990

Computation of the factorized error covariance of the difference between correlated estimators

A state estimation problem where some of the measurements may be common to two or more data sets is considered. Two approaches for computing the error covariance of the difference between filtered estimates (for each data set) are discussed. The first algorithm is based on postprocessing of the Kalman gain profiles of two correlated estimators. It uses UD factors of the covariance of the relative error. The second algorithm uses a square root information filter applied to relative error analysis. In the absence of process noise, the square root information filter is computationally more efficient and more flexible than the Kalman gain (covariance update) method. Both the algorithms (covariance and information matrix based) are applied to a Venus orbiter simulation, and their performances are compared.

Wolff, Peter J.↗
NASA NTRS1990

Reaction control system/remote manipulator system automation

The objectives of this project is to evaluate the capability of the Procedural Reasoning System (PRS) in a typical real-time space shuttle application and to assess its potential for use in the Space Station Freedom. PRS, developed by SRI International, is a result of research in automating the monitoring and control of spacecraft systems. The particular application selected for the present work is the automation of malfunction handling procedures for the Shuttle Remote Manipulator System (SRMS). The SRMS malfunction procedures will be encoded within the PRS framework, a crew interface appropriate to the RMS application will be developed, and the real-time data interface software developed. The resulting PRS will then be integrated with the high-fidelity On-orbit Simulation of the NASA Johnson Space Center's System Engineering Simulator, and tests under various SRMS fault scenarios will be conducted.

Hiers, Harry K.↗
NASA NTRS1994

AF Ni-Cd cell qualification program

The present status of the USAF NiCd cell qualification program, which is underway at the Naval Surface Warfare Center-Crane Division, is summarized. The following topics are discussed: overview; background; purpose; stress tests; results for super Ni-Cd; results for SAFT cells; GPS stress test; GPS simulated orbit; and results for gates cells. The discussion is presented in viewgraph format.

Hall, Steve↗
NASA NTRS1997

STS-85 Day 05 Highlights

On this fifth day of the STS-85 mission, the flight crew, Cmdr. Curtis L. Brown, Jr., Pilot Kent V. Rominger, Payload Cmdr. N. Jan Davis (Ph.D.), Mission Specialists Robert L. Curbeam, Jr. and Stephen K. Robinson (Ph.D.), and Payload Specialist Bjarni V. Tryggvason once again test the small robotic arm serving as a prototype for one that will fly as part of the Japanese Experiment Module on the International Space Station. Simulated orbital replacement unit detachment and reattachment will be the focus. Bob Curbeam discusses the progress of the flight with a television station in St Louis, before continuing his work with the Bioreactor Demonstration System designed to perform cell biology experiments under controlled conditions. Immediately after Curbeam's interview, Canadian Payload Specialist Bjarni Tryggvason is set to talk to elementary and high school students at a summer camp in Saskatchewan, Canada.

Source record↗
NASA NTRS2001

Thermally Induced Vibrations of the Hubble Space Telescope's Solar Array 3 in a Test Simulated Space Environment

NASA Goddard Space Flight Center and the European Space Agency (ESA) conducted a disturbance verification test on a flight Solar Array 3 (SA3) for the Hubble Space Telescope using the ESA Large Space Simulator (LSS) in Noordwijk, the Netherlands. The LSS cyclically illuminated the SA3 to simulate orbital temperature changes in a vacuum environment. Data acquisition systems measured signals from force transducers and accelerometers resulting from thermally induced vibrations of the SAI The LSS with its seismic mass boundary provided an excellent background environment for this test. This paper discusses the analysis performed on the measured transient SA3 responses and provides a summary of the results.

Early, Derrick A.↗
NASA NTRS2003

Capabilities of the Materials Contamination Team at Marshall Space Flight Center

The Materials Contamination Team at the Marshall Space Flight Center (MSFC) has been recognized for its contributions supporting the National Aeronautics and Space Administration (NASA) spacecraft development programs. These programs include the Reusable Solid Rocket Motor (RSRM), Chandra X-Ray Observatory, and the International Space Station (ISS). The Environmental Effects Group, with the Materials Contamination Team and the Space Environmental Effects Team has been an integral part of NASA's success by the testing, evaluation, and qualification of materials, hardware, and processes. This paper focuses on the capabilities of the Materials Contamination Team. The Materials Contamination Team's realm of responsibility includes establishing contamination control during all phases of hardware development, including design, manufacturing, assembly, test, transportation, launch site processing, on-orbit exposure, return, and refurbishment. The team continues its mission of reducing the risk of equipment failure due to molecular or particulate contamination. Contamination is a concern in the Space Shuttle with sensitive bond-lines and reactive fluid (liquid oxygen) compatibility as well as for spacecraft with sensitive optics, such as Hubble Space Telescope and Chandra X-ray Observatory. The Materials Contamination Team has a variety of facilities and instrumentation capable of contaminant detection, identification, and monitoring. The team addresses material applications dealing with environments, including production facilities, clean rooms, and on-orbit exposure. The optically stimulated electron emission (OSEE) system, the Ultraviolet (UV) fluorescence (UVF) surface contamination detection, and the Surface Optics Corporation 400 (SOC 400) portable hand-held Fourier Transform Infrared (FTIR) spectrometer are state-of-the-art tools for in-process molecular contamination detection. The team of engineers and technicians also develop contamination calibration standards and evaluate new surface cleanliness inspection technologies. The team utilizes facilities for on-orbit simulation testing of materials for outgassing and molecular film deposition characteristics in the presence of space environmental effects, such as Atomic Oxygen (AO) and UV radiation exposure. The Materials Contamination Team maintains databases for process materials as well as outgassing and optical compatibility test results for specific environments.

Burns, Howard↗
NASA NTRS2006

Functional brain imaging of a complex navigation task following one night of total sleep deprivation

Study Objectives: To assess the cerebral effects associated with sleep deprivation in a simulation of a complex, real-world, high-risk task. Design and Interventions: A two-week, repeated measures, cross-over experimental protocol, with counterbalanced orders of normal sleep (NS) and total sleep deprivation (TSD). Setting: Each subject underwent functional magnetic resonance imaging (fMRI) while performing a dual-joystick, 3D sensorimotor navigation task (simulated orbital docking). Scanning was performed twice per subject, once following a night of normal sleep (NS), and once following a single night of total sleep deprivation (TSD). Five runs (eight 24s docking trials each) were performed during each scanning session. Participants: Six healthy, young, right-handed volunteers (2 women; mean age 20) participated. Measurements and Results: Behavioral performance on multiple measures was comparable in the two sleep conditions. Neuroimaging results within sleep conditions revealed similar locations of peak activity for NS and TSD, including left sensorimotor cortex, left precuneus (BA 7), and right visual areas (BA 18/19). However, cerebral activation following TSD was substantially larger and exhibited higher amplitude modulations from baseline. When directly comparing NS and TSD, most regions exhibited TSD>NS activity, including multiple prefrontal cortical areas (BA 8/9,44/45,47), lateral parieto-occipital areas (BA 19/39, 40), superior temporal cortex (BA 22), and bilateral thalamus and amygdala. Only left parietal cortex (BA 7) demonstrated NS>TSD activity. Conclusions: The large network of cerebral differences between the two conditions, even with comparable behavioral performance, suggests the possibility of detecting TSD-induced stress via functional brain imaging techniques on complex tasks before stress-induced failures.

Strangman, Gary↗
NASA NTRS2008

Embedded Relative Navigation Sensor Fusion Algorithms for Autonomous Rendezvous and Docking Missions

bd Systems (a subsidiary of SAIC) has developed a suite of embedded relative navigation sensor fusion algorithms to enable NASA autonomous rendezvous and docking (AR&D) missions. Translational and rotational Extended Kalman Filters (EKFs) were developed for integrating measurements based on the vehicles' orbital mechanics and high-fidelity sensor error models and provide a solution with increased accuracy and robustness relative to any single relative navigation sensor. The filters were tested tinough stand-alone covariance analysis, closed-loop testing with a high-fidelity multi-body orbital simulation, and hardware-in-the-loop (HWIL) testing in the Marshall Space Flight Center (MSFC) Flight Robotics Laboratory (FRL).

DeKock, Brandon K.↗
NASA NTRS2004

Miniature Robotic Spacecraft for Inspecting Other Spacecraft

A report discusses the Miniature Autonomous Extravehicular Robotic Camera (Mini AERCam)-- a compact robotic spacecraft intended to be released from a larger spacecraft for exterior visual inspection of the larger spacecraft. The Mini AERCam is a successor to the AERCam Sprint -- a prior miniature robotic inspection spacecraft that was demonstrated in a space-shuttle flight experiment in 1997. The prototype of the Mini AERCam is a demonstration unit having approximately the form and function of a flight system. The Mini AERCam is approximately spherical with a diameter of about 7.5 in. (.19 cm) and a weight of about 10 lb (.4.5 kg), yet it has significant additional capabilities, relative to the 14-in. (36-cm), 35-lb (16-kg) AERCam Sprint. The Mini AERCam includes miniaturized avionics, instrumentation, communications, navigation, imaging, power, and propulsion subsystems, including two digital video cameras and a high-resolution still camera. The Mini AERCam is designed for either remote piloting or supervised autonomous operations, including station keeping and point-to-point maneuvering. The prototype has been tested on an air-bearing table and in a hardware-in-the-loop orbital simulation of the dynamics of maneuvering in proximity to the International Space Station.

Fredrickson, Steven↗
NASA NTRS2012

Mini AERCam for In-Space Inspection

The NASA Johnson Space Center Engineering Directorate has developed the Miniature Autonomous Extravehicular Robotic Camera (Mini AERCam) as a free-flying, robotic inspection vehicle intended for future external inspection and remote viewing of human spacecraft. The Mini AERCam technology demonstration unit has been successfully integrated into the approximate form and function of a nanosatellite flight system by leveraging the success of AERCam Sprint flight system and related free-flyer technology development. The Mini AERCam free flyer can be operated via remote piloting from a control station supporting teleoperation and supervised autonomous commanding, with functions such as automatic stationkeeping, point-to-point maneuvering, and automatic docking. Free-flyer testing has been conducted on an air-bearing table and in a six degree-of-freedom closed-loop orbital simulation, and enhancements have been made to provide additional capabilities for future space-based inspection. This presentation will provide a technical overview of the Mini AERCam development, including strategies for spacecraft integration.

Fredrickson, Steven E.↗
NASA NTRS2016

Soil Moisture Active Passive (SMAP) Project Algorithm Theoretical Basis Document SMAP L1B Radiometer Data Product: L1B_TB

The purpose of the Soil Moisture Active Passive (SMAP) radiometer calibration algorithm is to convert Level 0 (L0) radiometer digital counts data into calibrated estimates of brightness temperatures referenced to the Earth's surface within the main beam. The algorithm theory in most respects is similar to what has been developed and implemented for decades for other satellite radiometers; however, SMAP includes two key features heretofore absent from most satellite borne radiometers: radio frequency interference (RFI) detection and mitigation, and measurement of the third and fourth Stokes parameters using digital correlation. The purpose of this document is to describe the SMAP radiometer and forward model, explain the SMAP calibration algorithm, including approximations, errors, and biases, provide all necessary equations for implementing the calibration algorithm and detail the RFI detection and mitigation process. Section 2 provides a summary of algorithm objectives and driving requirements. Section 3 is a description of the instrument and Section 4 covers the forward models, upon which the algorithm is based. Section 5 gives the retrieval algorithm and theory. Section 6 describes the orbit simulator, which implements the forward model and is the key for deriving antenna pattern correction coefficients and testing the overall algorithm.

microwave radiometers↗
NASA NTRS2017

Developing a 3-DOF Compliant Perching Arm for a Free-Flying Robot on the International Space Station

This paper presents the design and control of the 3-DOF compliant perching arm for the free-flying Astrobee robots that will operate inside the International Space Station (ISS). The robots are intended to serve as a flexible platform for future guest scientists to use for zero-gravity robotics research - thus, the arm is designed to support manipulation research. It provides a 1-DOF underactuated tendon-driven gripper capable of enveloping a range of objects of different shapes and sizes. Co-located RGB camera and LIDAR sensors provide perception. The Astrobee robots will be capable of grasping each other in flight, to simulate orbital capture scenarios. The arm's end-effector module is swappable on-orbit, allowing guest scientists to add upgraded grippers, or even additional arm degrees of freedom. The design of the arm balances research capabilities with Astrobee's operational need to perch on ISS handrails to reduce power consumption. Basic arm functioning and grip strength were evaluated using an integrated Astrobee prototype riding on a low-friction air bearing.

Park, In-Won↗
NASA NTRS2018

Development of a High Speed Rain Impact Capability

Enhancement of a 2-stage light gas gun capability is under development at NASA Marshall Space Flight Center for the purpose of making rain impacts on nose cone and window materials. This paper will discuss current capabilities of this gun system and the path it took to get there. The end goal is to be able to provide realistic rain and thermal environments, simulating rain impact conditions of high speed flight (combined effects). In the past year, the ability to create impacts to simulate rain using 2, 3, and 4 mm Nylon beads in the 7,000-10,000 ft/s (2.13-3.05 km/s) range at room temperature has been demonstrated. It is desired to extend this range down to 6000 ft/s (1.83 km/s) for rain impact purposes. The size range capability will also be extended to launch particles 1 mm and smaller. In addition, a heating capability is being added to the system to potentially cover a temperature range from room temperature to 5000 F. Hydrogen light gas will extend the velocity range to 23,000-26,000 ft/s (7-8 km/s), simulating orbital debris impacts for vehicles that spend a significant amount of time in space. Particle impact precision will also be evaluated during this development process.

Gray, Perry↗
NASA NTRS2012

Navigation between geosynchronous and lunar L₁ orbiters

Linked Autonomous Interplanetary Satellite Orbit Navigation (LiAISON) is a new technique that takes advantage of the asymmetrical gravity field present in a three-body system in order to perform absolute tracking of satellites using only relative satellite-to-satellite observations. Previous studies have demonstrated LiAISON’s practical applications for lunar missions, including a satellite in a halo orbit about either the Earth-Moon L₁or L₂ point. This paper studies the viability of applying LiAISON measurements between a lunar halo orbiter and a satellite in a geosynchronous orbit. Simulations demonstrate that the absolute positions and velocities of both satellites are observable using only relative measurements with an achieved uncertainty on the order of observation noise.

Anderson, Rodney L.↗
NASA NTRSDate not supplied

Towards Gbps Downlinks from Low-Cost Active Phased Arrays

Spacecraft performing science missions use high-directivity antennas to quickly downlink large amounts of collected data. Movement required to keep gimbaled reflector antennas trained on target receivers can impart blockages or vibrations which perturb precision science instruments. Recent manufacturing advances have made Ka-band electronically-steered antenna arrays a cost-effective option to mitigate these challenges, but only if these devices can be proven to deliver comparable quality of service. In this work we present a hardware and software architecture for high-rate links using an active phased array-based terminal in a 1U (10cm cube) form factor. Over-the-air tests in an antenna range characterize two key features of the architecture: high-order (32APSK and above) modulations and dual carriers. We calculate an optimal modulation-dependent input power backoff from array saturation and perform orbital simulations of the link at this operating point. We conclude that reliable links with rates in excess of 1Gbps are possible with current-generation hardware.

Adam Gannon↗