Search NASA⌕ Search

SEARCH · Search NASA

Results for “PAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Realistic Geochemical Parameter Uncertainty for Performance Assessment Modeling - 17066

Performance assessments (PAs) include uncertain geochemical parameters that affect the fate and transport of contaminants in environmental media, such as partitioning coefficients for water/rock (K{sub d}) and water/air (K{sub H}), diffusion coefficients, and aqueous solubilities. A statistical approach to realistic, as opposed to 'conservative,' stochastic distribution development for geochemical parameters is presented here. For contaminants not identified as focus elements during screening, broad generic distributions are developed. If any parameter is flagged in the subsequent model sensitivity analysis (SA), it becomes a focus element for further research during the next round of distribution development. This iterative approach is efficient and technically defensible at each stage. Data are collected in databases and may be appropriately weighted or filtered. In the relatively few cases where data exist from local or analogous rocks, those data may be prioritized. Once established, the databases can be used for future PAs or other environmental models and can be expanded as needed based on model SA results, additional screening, and as additional relevant data become available. The iterative method is demonstrated for K{sub d} and K{sub H} in a PA model for a radioactive waste disposal facility. An SA was performed based on preliminary geochemical parameter distributions that showed certain model endpoints are sensitive to K{sub d} and K{sub H} values for some contaminants. This underscores the importance of including realistic uncertainty in these geochemical parameters. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Statistical Methods for Effective Spatial and Temporal Scaling in Support of Probabilistic Performance Assessments - 17340

Performance assessments (PAs) for the disposal of low-level radioactive waste have traditionally been performed in a deterministic manner, with inputs specified as single values as if they carry no uncertainty. Modern PAs, however, explicitly incorporate uncertainty through use of probability distributions for inputs instead of single values. While this is clearly an improvement, challenges remain in specifying appropriate distributions, many of which relate to capturing the appropriate spatial and/or temporal scale given the PA model, and matching the scale(s) of data and information to that specified by the model. More careful attention to scaling will lead to more defensible characterizations of physical variability and uncertainty in model inputs, thus leading to more defensible information regarding outcomes of interest to be used in decision making, and hence more defensible decisions. This work introduces general strategies and considerations for explicitly incorporating considerations of scale into distribution development. The strategies are explained as a series of steps and then presented with an example that starts to illustrate the new statistical concepts. This work frames the problem in terms of hierarchical statistical modeling, providing important connections to current statistical approaches to formally and rigorously account for temporal and spatial scaling. The larger goal is to build a more formal and unified approach to distribution development to help teams of modelers, subject matter experts, and statisticians work together to develop distributions and justify the choices made in the process, ultimately leading to more informed decision-making. Without this rigor, statistical distributions are not specified correctly and can have unexpected consequences for modeling and sensitivity analysis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

A Multiple Lines of Evidence Approach for Conceptual Site Models in Performance Assessments - 19070

Demonstration of the long-term performance of remediated radioactive waste sites relies on models that evaluate vadose zone and groundwater flow and contaminant transport for thousands of years. Model qualification, verification, and comparisons with data are essential elements to demonstrating the accuracy of long-term performance assessments (PAs). However, comparisons with data are generally limited due to incomplete characterization data and long-time scales. Since PAs support decision making to assure long-term protection of both human health and the environment, a conceptual site model (CSM) is needed to explain the hydrodynamic behavior and account for subsurface heterogeneities in sufficient detail to support confident decisions. In the case of the Waste Management Area (WMA) C PA, where the focus of the effort is on characterizing flow and transport through a thick vadose zone, site-specific data are sparse and larger-scale geologic descriptions are adopted with the risk of losing small scale features that may affect contaminant transport. Features such as horizontal bedding and sloping interfaces between contrasting material types, as well as vertically oriented features such as clastic dikes, may be difficult to delineate from sparse characterization data, but may affect the extent to which contaminants are transported. The PA conducted to identify long-term impacts associated with the closure of the single-shell tank (SST) farm at WMA C adopted an equivalent homogenous medium approach to represent the major stratigraphic units at the site. This approach explicitly represents major stratigraphic units but assigns hydraulic properties that implicitly account for the presence of small-scale heterogeneities and their impact on flow and contaminant transport to the groundwater. The objective of this study is to evaluate the available site-specific and analogue data that can be used to characterize heterogeneity and to assess its impact on fate and transport of contaminants that may lead to different conclusions when compared to the results of the equivalent homogeneous media approach. To this end, a multiple lines of evidence approach was used to construct alternative CSMs based on an evaluation of several types of data. These data include 1) general characteristics and features of the major stratigraphic units from historical descriptions; 2) borehole geologic logs; 3) particle size distribution measurements; 4) moisture content measurements; 5) spectral gamma data; and 6) concentrations of key constituents (i.e., Tc-99) in both the vadose zone and groundwater impacted by past releases. Based on an analysis of the available data, lines of evidence are evaluated for consistency and integrated in a consistent manner into scientifically defensible CSMs. Numerical models are then used to evaluate the impact that the explicit representation of heterogeneities has on contaminant transport. Together, the field data and the numerical modeling results indicate that heterogeneity caused by the small-scale features do not have a significant (i.e. greater than a factor of 2) impact on transport below WMA C relative to peak concentrations and arrival times for potential releases from waste tanks. The results of this study underscore the value of using multiple lines of evidence based on the quantity and quality of available data in developing alternative CSMs and evaluating their relative impact on key transport metrics such as arrival times and peak concentration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Reaction Optimization for Enzymatic Deconstruction of Industrially Relevant Nylon Composites

Plastics such as polyamides (PAs) possess unique physicochemical properties that make them indispensable in modern society. However, their energy‐intensive production and challenging end‐of‐life management highlight the urgent need for efficient recycling or remanufacturing solutions. Enzymatic depolymerization offers a promising route toward circular recycling, yet remains constrained by limited enzyme characterization, lack of validation under industrially relevant conditions and substrates, and overall performance. Here, we optimized the reaction conditions for three recently discovered nylon‐degrading enzymes. One of them, Nyl12, achieved product titers with PA6 and PA66 that exceed previously reported values, without enzyme engineering or substrate pretreatment. We further demonstrated the scalability of the process and its application to complex PA‐based materials used in microelectronic components. Analysis of substrate features, including surface area and particle size, revealed key parameters governing enzymatic activity and provided a framework for future pretreatment and process optimization efforts. In combination, these efforts provide a new benchmark for enzymatic nylon recycling.

nylon↗
DOE OSTI2025

Hydrolysis of Polyamide 6 to ε‐Caprolactam over Titanium Dioxide

Polyamides (PAs) are an important component of discarded textiles and food packaging. Chemical recycling can recover PA monomers, enabling repolymerization to produce virgin-grade PA. However, contemporary PA chemical recycling methods employ homogeneous catalysts that are hard to separate. Anatase TiO 2 is reported as a catalyst for PA6 hydrolysis at 270 °C for 0.5 h, achieving a maximum ε-caprolactam (CL) yield of 81% (limited by thermodynamic equilibrium). The CL yield decreases upon catalyst reuse, due to loss of catalyst surface area induced by significant changes in catalyst crystallinity and texture. Pretreating the catalyst hydrothermally stabilizes it against morphological changes, yielding repeatable CL yields. Altogether, this study discloses a heterogeneous catalyst capable of producing repeatable equilibrium CL yields via PA6 hydrolysis under industrially relevant reaction temperatures and times (<3 h, 250–330 °C).

depolymerization↗
DOE OSTI2018

Thylakoid-integrated recombinant Hcf106 participates in the chloroplast twin arginine transport system

The chloroplast twin arginine transport (cpTat) system distinguishes itself as a protein transport pathway by translocating fully folded proteins, using the proton-motive force (PMF) as the sole source of energy. The cpTat pathway is evolutionarily conserved with the Tat pathway found in the plasma membrane of many prokaryotes. The cpTat (Escherichia coli) system uses three proteins, Tha4 (TatA),Hcf106 (TatB), and cpTatC (TatC), to form a transient translocase allowing the pas-sage of precursor proteins. Briefly, cpTatC and Hcf106, with Tha4, form the initial receptor complex responsible for precursor protein recognition and binding in an energy-independent manner, while a separate pool of Tha4 assembles with the pre-cursor-bound receptor complex in the presence the PMF. Analysis by blue-native polyacrylamide gel electrophoresis (BN-PAGE) shows that the receptor complex, in the absence of precursor, migrates near 700 kDa and contains cpTatC and Hcf106with little Tha4 remaining after detergent solubilization. To investigate the role thatHcf106 may play in receptor complex oligomerization and/or stability, systematic cysteine substitutions were made in positions from the N-terminal transmembrane domain to the end of the predicted amphipathic helix of the protein. BN-PAGE analysis allowed us to identify the locations of amino acids in Hcf106 that were critical for interacting with cpTatC. Oxidative cross-linking allowed us to map interactions of the transmembrane domain and amphipathic helix region of Hcf106. In addition, we showed that in vitro expressed, integrated Hcf106 can interact with the precursor signal peptide domain and imported cpTatC, strongly suggesting that a subpopulation of the integrated Hcf106 is participating in competent cpTat complexes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Wholly Heterocycles-Based Polyamide–Sulfide Containing Pyridine and Thiazole Rings: A Super-Adsorbent Polymer for Lead Removal

Wholly heterocycles-based polyamide-sulfide (PAS) containing pyridine and thiazole rings with thioether linkage was synthesized and used as a novel adsorbent for lead ion removal from water. The polymer adsorbent was fully characterized via FTIR, NMR and scanning electron microscopy (SEM). The thermal properties of the synthesized polyamide were also studied by thermogravimetric analysis and the outcome showed that the polymer has a good to moderate thermal stability. The SEM was used to investigate the morphology of the wholly heterocycles-based polyamide and the outcomes displayed a porous and globular-like morphology, which guarantee effective metal adsorption. Pb(II) ion removal capacity of the synthesized polymer was studied by varying the contact time and the adsorbent concentration. The maximum removal of Pb(II) was obtained as 99%. Equilibrium behavior and kinetic of the adsorption were also investigated using prevalent isotherm and kinetic models. The adsorption capacity was obtained to be around 714 mg g{sup −1}. The Langmuir isotherm and the pseudo-second order kinetic model suggested superior agreement with the equilibrium and kinetic adsorption data, respectively. Generally, the results of this research demonstrated that the synthesized polymer is a super-adsorbent for heavy metal removal from water.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Bio-based PA5.10 for Industrial Applications: Improvement of Barrier and Thermo-mechanical Properties with Rice Husk Ash and Nanoclay

Composites consisting of renewable PA5.10 were obtained from melt compounding with a modified clay (CL) and/or a by-product obtained from the combustion of rice husk (RHA). Two different industrialized lab-scale machines were used to obtain the final shape: a film extrusion machine and an injection moulding apparatus. The industrial application requirements for polyamides generally need good barrier properties and high thermo-mechanical strength. Considering the barrier properties, the CL was able to decrease the oxygen permeability to less than half with respect to neat PA5.10. DMTA demonstrated that the addition of RHA caused a consistent enhancement (+ 46 °C) in the heat deflection temperature (HDT) compared to the neat PA5.10 matrix, increasing the possible areas of interest. Furthermore, the simultaneous presence of RHA and CL provided the best result reaching an extraordinary HDT of 131 °C. A complete discussion taking into account the morphology, crystallinity and filler-matrix adhesion evaluation was reported as well as comparison of performances with other bio-PAs composites. These two fillers can therefore be used separated or together combined in PA5.10 for functional purposes in a sustainable scenario.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Infections in patients using ventricular-assist devices: Comparison of the diagnostic performance of {sup 18}F-FDG PET/CT scan and leucocyte-labeled scintigraphy

Background: The usage of left-ventricular-assist device (LVAD) is increasing in patients presenting with advanced heart failure. However, device-related infections are a challenge to recognize and to treat, with an important morbidity and mortality rate. The role of nuclear medicine imaging remains not well established for LVAD infections. The present study compared the accuracy of positron emission tomography/computed tomography with {sup 18}F-fludeoxyglucose ({sup 18}F-FDG PET/CT) and radiolabeled leucocyte scintigraphy for the diagnosis of infections in patients supported with a continuous-flow LVAD. Methods: From a prospectively maintained database, we retrospectively analyzed the diagnostic performance of radiolabeled leucocyte scintigraphy and {sup 18}F-FDG PET/CT in 24 patients who had a LVAD with a suspected device-related infection. Both examinations were routinely performed in all patients. Infection was assessed by the International Society for Heart and Lung Transplantation criteria. Results: Twenty-four patients were included: 15 had a specific VAD infection (5 cardiac-LVAD and 10 driveline), 6 had a VAD-related infection, while 3 patients had a non-VAD-related infection. Sensitivity, specificity, positive predictive value, negative predictive value, and accuracy were 95.2%, 66.7%, 95.2%, 66.7%, and 91.6%, respectively, for {sup 18}F-FDG-PET; and 71.4%, 100%, 100%, 33.3%, and 75%, respectively, for leucocyte scintigraphy. {sup 18}F-FDG PET/CT showed significantly higher sensitivity (P = 0.01) than leucocyte scintigraphy. Conclusion: {sup 18}F-FDG PET/CT and radiolabeled leucocyte scintigraphy single-photon emission computed tomography carry high performance in the diagnostic of LVAD infections. {sup 18}F-FDG PET/CT shows significantly higher sensitivity and could be proposed as first-line nuclear medicine procedure. [French] French Abstract: Contexte: L’utilisation du dispositif d’assistance ventriculaire gauche (DAVG) est en utilisation croissante chez les patients avec insuffisance cardiaque avancée. Cependant, les infections liées au dispositif sont un défi à reconnaître et à traiter en raison d’ un taux de morbidité et de mortalité important. Le rôle de l’imagerie de médecine nucléaire n’est pas encore bien établi pour les infections secondaires au DAVG. La présente étude compare la précision de la tomographie par émission de positrons / tomodensitométrie au 18F-fluorodéoxyglucose (18F-FDG TEP/TDM) et la scintigraphie leucocytaire radio-marquée pour le diagnostic d’infections chez des patients porteurs par un DAVG à flux continu. Méthodes: A partir d’une base de données complétée de manière prospective nous avons analysé rétrospectivement les performances diagnostiques de la scintigraphie leucocytaire radio-marquée et de la TEP / TDM au 18F-FDG chez 24 patients ayant un DAVG avec une infection suspectée liée à l’appareillage. Les deux types d’examens scintigraphiques ont été systématiquement réalisé chez tous les patients. Le diagnostic d’infection fut établi selon les critères ISHLT. Résultats: Parmi les 24 patients inclus, 15 avaient une infection spécifique de l’appareillage AVG (5 au niveau de la pompe et/ou canule d’insertion myocardique) et 10 au niveau du driveline, 6 avaient une infection indirectement liée à l’appareillage AVG, tandis que 3 patients avaient une infection non liée au DAVG. La sensibilité, la spécificité, la valeur prédictive positive, la valeur prédictive négative et la précision étaient de 95,2%, 66,7%, 95,2%, 66,7% et 91,6%, respectivement, pour le 18F-FDG-PET et 71,4%, 100%, 100%, 33,3 %, et 75%, respectivement, pour la scintigraphie leucocytaire. La TEP / TDM au 18F-FDG a montré une sensitivité significativement plus élevée (p = 0,01) que la scintigraphie leucocytaire. Conclusion: 18F-FDG TEP/TDM et scintigraphie leucocytaire radio-marquée SPECT s’avèrent très efficaces pour le diagnostic des infections à DVAG. La TEP/TDM au 18F-FDG montre une sensibilité significativement plus élevée et pourrait être proposée en tant que la procédure de médecine nucléaire de premier choix. [Spanish] Spanish Abstract: Antecedentes: El uso de dispositivos de asistencia ventricular izquierda (DAVI) está incrementando en pacientes con insuficiencia cardiaca avanzada. Sin embargo, las infecciones relacionadas al dispositivo representan un reto diagnóstico y de tratamiento, con una importante tasa de morbilidad y mortalidad. El papel de los estudios de imagen de medicina nuclear en las infecciones de DAVI no se ha establecido claramente. El presente estudio comparó la precisión de la tomografía por emisión de positrones/tomografía computada con {sup 18}F-fluorodesoxiglucosa ({sup 18}F-FDG PET/CT) y la gammagrafía con leucocitos marcados para el diagnóstico de infecciones en pacientes utilizando un DAVI de flujo continuo. Métodos: Desde una base de datos obtenida de manera prospectiva, analizamos de manera retrospectiva el rendimiento diagnóstico de la gammagrafía de leucocitos marcados y del {sup 18}F-FDG PET/CT en 24 pacientes quienes tenían un DAVI con sospecha de infección relacionada al dispositivo. Ambos estudios fueron realizados rutinariamente en todos los pacientes. Se determinó la presencia de infección mediante los criterios de la ISHTL. Resultados: Se incluyeron veinticuatro pacientes, de los cuales 15 tuvieron una infección específica de DAV (5 con infecciones DAVI, y 10 con infección del driveline), 6 tuvieron una infección relacionada al DAV, y 3 pacientes tuvieron una infección no relacionada al DAV. La sensibilidad, especificidad, valor predictivo positivo, valor predictivo negativo y precisión diagnóstica fueron 95.2%, 66.7%, 95.2%, 66.7% y 91.6%, respectivamente para {sup 18}F-FDG PET/CT, y 71.4%, 100%, 100%, 33.3% y 75%, respectivamente para la gammagrafía de leucocitos marcados. El {sup 18}F-FDG PET/CT mostró una significativa mayor sensibilidad (p=0.01) que la gammagrafía con leucocitos marcados. Conclusión: El {sup 18}F-FDG PET/CT y la gammagrafía de leucocitos marcados tienen un alto desempeño en el diagnóstico de infecciones de DAVI. El {sup 18}F-FDG PET/CT muestra una significativa mayor sensibilidad y podría ser propuesto como el procedimiento de medicina nuclear de primera línea. [Chinese] Chinese Abstract: 背景: 左心室辅助装置 (LVAD) 越来越多的应用于重度心力衰竭患者。然而, 设备相关的感染有着重要的发病率和死亡率, 并且对其诊断和治疗均是一项挑战。对于 LVAD 相关感染, 核医学影像可扮演的角色一直没有完善。本研究针对装备有连续流式 LVAD 的感染病人,对比了 {sup 18}F-FDG PET/CT 造影术和放射性标记白细胞闪烁扫描法对感染诊断的准确性。 方法: 从一个前瞻性的数据库, 入选了24名疑似设备感染的 LVAD 病人, 并回顾性的分析了放射性标记白细胞闪烁扫描法和 {sup 18}F-FDG PET/CT 的诊断表现。所有病人都常规进行了上述两种检查。利用 ISHLT 标准对感染情况进行评估。 结果: 在入选的 24 名病人中, 15 名有明确的 VAD 感染 (5 名心脏的 LVAD 和 10 名动力传动系统装置), 6 名有 VAD 相关的感染,另外3名有 VAD 无关的感染。对于 {sup 18}F-FDG PET/CT 诊断方法,其敏感性,特异性,阳性预测值,阴性预测值和准确率分别为: 95.2%, 66.7%, 95.2%, 66.7%, 和 91.6%; 而对于白细胞闪烁扫描诊断方法, 其敏感性, 特异性, 阳性预测值,阴性预测值和准确率分别为: 71.4%, 100%, 100%, 33.3% 和 75%。相比于白细胞闪烁扫描, {sup 18}F-FDG PET/CT 明显展现出较高的敏感性 (p=0.01)。 结论: {sup 18}F-FDG PET/CT 和白细胞闪烁扫描 SPECT 对于 LVAD 感染的诊断具有很好的表现。{sup 18}F-FDG PET/CT 展现出较高的敏感性,可以作为核医学的首要检查。.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2014

Silencing NPAS2 promotes cell growth and invasion in DLD-1 cells and correlated with poor prognosis of colorectal cancer

Highlights: • NPAS2 mRNA was down-regulated in clinical colorectal cancer tissues. • Low NPAS2 level was associated with the tumor size, TNM stage and distance metastasis in CRC. • Silencing NPAS2 promoted cell proliferation, the wound healing and cell invasion abilities. - Abstract: Emerging evidences show that circadian rhythm disorder is an important factor of tumor initiation and development. Neuronal PAS domain protein2 (NPAS2), which is the largest circadian gene, has been proved to be a novel prognostic biomarker in breast cancer and non-Hodgkin’s lymphoma. However, the potential functions of NPAS2 in colorectal cancer are still unknown. In our present study, we detected the mRNA expressions of NPAS2 in 108 CRC patients by RT-PCR, and found that NPAS2 expression was significantly down-regulated in tumor tissues than that in NATs. Clinicopathologic analysis revealed that low expression of NPAS2 was associated with the tumor size, TNM stage and tumor distance metastasis in colorectal cancer (p < 0.05). Furthermore, we effectively down-regulated NPAS2 mRNA expression by transfecting RNA interfere fragments into DLD-1 cells, and our results in vitro demonstrated that silencing NPAS2 expression could promote cell proliferation, cell invasion and increase the wound healing ability (p < 0.05). However, down-regulating NPAS2 expression did not influence the apoptotic rate in DLD-1 cells (p > 0.05). In conclusion, our study suggested that NPAS2, functioned as a potential tumor suppressor gene, could serve as a promising target and potential prognostic indicator for colorectal cancer.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

MiR-455-3p suppresses renal fibrosis through repression of ROCK2 expression in diabetic nephropathy

Highlights: • Downregulation of miR-455-3p expression in DN. • ROCK2 as a target of miR-455-3p. • Re-introduction of ROCK2 attenuated the effect of miR-455-3p on cell proliferation, ECM accumulation and EMT in vitro. • Reductions in proinflammatory levels and renal fibrosis by miR-455-3p usages, in vivo. Emerging evidence has shown that microRNAs (miRNAs) play a mediatory role in the pathogenesis of diabetic nephropathy (DN), but the function of the involved miRNAs is still incomplete. Here, we found that miR-455-3p was down-regulated in the human mesangial cells (HMC) and human proximal tubule epithelial cells (HK-2) stimulated with high glucose (HG) or transforming growth factor beta 1 (TGF-β1). Rho-associated coiled coil-containing protein kinase 2 (ROCK2) was identified as a directed target of miR-455-3p. Overexpression of ROCK2 significantly attenuated the inhibitory effects of miR-455-3p on cell proliferation, extracellular matrix (ECM) synthesis and epithelial-mesenchymal transition (EMT) in HG-treated cells. Furthermore, the DN model was prepared by using high-fat feeding combined with Streptozotocin (STZ) induced rats, and the DN group was treated by injecting miR-455-3p agomir. The results of periodic acid-Schiff (PAS) and Masson staining showed that miR-455-3p overexpression improved the pathological changes of glomerular hypertrophy, mesangial amplification, and renal fibrosis. Additionally, miR-455-3p overexpression decreased ROCK2, proliferating cell nuclear antigen (PCNA) and Collagen I levels, and also reduced inflammatory cytokines TNF-α, MCP-1 and IL-1β levels in vivo. Altogether, these results suggest that miR-455-3p plays an essential role in the treatment of renal fibrosis through repressing ROCK2 expression; and miR-455-3p might be an effective therapy for DN.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Room temperature crystallography of human acetylcholinesterase bound to a substrate analogue 4K-TMA: Towards a neutron structure

Acetylcholinesterase (AChE) catalyzes hydrolysis of acetylcholine thereby terminating cholinergic nerve impulses for efficient neurotransmission. Human AChE (hAChE) is a target of nerve agent and pesticide organophosphorus compounds that covalently attach to the catalytic Ser203 residue. Reactivation of inhibited hAChE can be achieved with nucleophilic antidotes, such as oximes. Understanding structural and electrostatic (i.e. protonation states) determinants of the catalytic and reactivation processes is crucial to improve design of oxime reactivators. Here we report X-ray structures of hAChE conjugated with a reversible covalent inhibitor 4K-TMA (4K-TMA:hAChE) at 2.8 Å resolution and of 4K-TMA:hAChE conjugate with oxime reactivator methoxime, MMB4 (4K-TMA:hAChE:MMB4) at 2.6 Å resolution, both at physiologically relevant room temperature, as well as cryo-crystallographic structure of 4K-TMA:hAChE at 2.4 Å resolution. 4K-TMA acts as a substrate analogue reacting with the hydroxyl of Ser203 and generating a reversible tetrahedral hemiketal intermediate that closely resembles the first tetrahedral intermediate state during hAChE-catalyzed acetylcholine hydrolysis. Structural comparisons of room temperature with cryo-crystallographic structures of 4K-TMA:hAChE and published mAChE complexes with 4K-TMA, as well as the effect of MMB4 binding to the peripheral anionic site (PAS) of the 4K-TMA:hAChE complex, revealed only discrete, minor differences. The active center geometry of AChE, already highly evolved for the efficient catalysis, was thus indicative of only minor conformational adjustments to accommodate the tetrahedral intermediate in the hydrolysis of the neurotransmitter acetylcholine (ACh). To map protonation states in the hAChE active site gorge we collected 3.5 Å neutron diffraction data paving the way for obtaining higher resolution datasets that will be needed to determine locations of individual hydrogen atoms.

4K-TMA↗
DOE OSTI2017

Assessing the urban carbon footprint: An overview

All cities present environmental sustainability issues, above all regarding greenhouse gas (GHG) emissions, and specifically carbon dioxide (CO{sub 2}), that directly affect climate change. Consequently, it is very important to quantify and report their Carbon Footprint (CF) for implementing national and international policies/strategies aimed at mitigating and adapting these concerns. The Urban Carbon Footprint (UCF), indeed, has been recognized as the more valuable choice to inform, specifically, decision makers about city environmental sustainability. Several accounting systems and inventory methods have been taken into account to perform UCF, highlighting the complexity of the topic and generating very often confusion among users. In this context, the authors aim to summarize what has been done and what is going on with UCFs, trying to classify them according to some principal dimensions. Thus, they divide UFCs in two main categories namely: “spatial” or “direct”, with a limited amount of data requested, and “economic” or “life cycle based”, more or less data inclusive according to the accounting systems considered. Furthermore, they observe that there is not a “global agreed-upon protocol” yet, neither is there a specific model shared among researchers, even if some steps have been made towards this direction (Relative Carbon Footprint - RCF, Publicly Available Specification – PAS 2070 and Global Protocol for Community scale - GPC). Consequently, it is necessary to complete and standardize, in the short term, the accounting and reporting frameworks, in order to compare different UCFs for adopting shared climate strategies and actions at global level. - Highlights: •Cities present environmental sustainability issues. •GHG emissions - specifically carbon dioxide - directly affect climate change. •UCF is a tool to support policy makers towards city environmental sustainability. •There is not a “global agreed-upon protocol” to perform UFC. •There are still missing points to be considered to provide a sharing model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2017

Phosphoranimines containing cationic N-imidazolinium moieties

For this study, three new monomeric phosphoranimines (PAs; R'—N=PR 3 ) were synthesized by the Staudinger route using 2-azido-1,3-dimethylimidazolinium hexafluorophosphate [ADMImPF] and various phosphines to form their respective PA salts of triphenylphosphine (1), tri(n-octyl)phosphine (2), and tris(2,2,2-trifluoroethoxy)phosphite (3). These PA salts have a cationic imidazolinium moiety attached to nitrogen. Interestingly, 2 is a room temperature ionic liquid (RTIL) with a melting point around -5°C and a viscosity of 740cP at 25.5°C. 1 and 2 show stability to moisture exposure and atmosphere for weeks whereas 3 is not stable toward atmospheric moisture undergoing decomposition to form 2-amino-1,3-dimethylimidazolinium phosphate (4). Thermal analyses reveal that 1 and 2 are stable to 90°C under nitrogen, but 3 undergoes degradation by exposure to moisture and/or elevated temperature. All compounds exhibit similar multinuclear NMR chemical shifts as compared to their corresponding phosphine oxide counterparts. However, their respective X-ray structure determinations indicate that 2 has an open structure with the octyl groups that avoid the ionic charges, whereas 1 and 3 have tighter structural packing of the hexafluorophosphate to their pendant groups.$\longequal$

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Microstructure stability of ultra-fine grained magnesium alloy AZ31 processed by extrusion and equal-channel angular pressing (EX–ECAP)

Thermal stability of the ultra-fine grained (UFG) microstructure of magnesium AZ31 alloy was investigated. UFG microstructure was achieved by a combined two-step severe plastic deformation process: the extrusion (EX) and subsequent equal-channel angular pressing (ECAP). This combined process leads to refined microstructure and enhanced microhardness. Specimens with UFG microstructure were annealed isochronally at temperatures 150–500 °C for 1 h. The evolution of microstructure, mechanical properties and dislocation density was studied by electron backscatter diffraction (EBSD), microhardness measurements and positron annihilation spectroscopy (PAS). The coarsening of the fine-grained structure at higher temperatures was accompanied by a gradual decrease of the microhardness and decrease of dislocation density. Mechanism of grain growth was studied by general equation for grain growth and Arrhenius equation. Activation energies for grain growth were calculated to be 115, 33 and 164 kJ/mol in temperature ranges of 170–210 °C, 210–400 °C and 400–500 °C (443–483 K, 483–673 K and 673–773 K), respectively. - Highlights: • Microhardness of UFG AZ31 alloy decreases with increasing annealing temperature. • This fact has two reasons: dislocation annihilations and/or grain growth. • The activation energies for grain growth were calculated for all temperature ranges.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrathin-film composite (uTFC) membranes based on amorphous perfluoropolymers for liquid separations

Thin-film composite membranes based on ~100nm cross-linked polyamides (PAs) are state-of-the-art membranes for liquid separations such as desalination. However, the PA layer shows poor antifouling properties and instability in chlorine solutions. Herein, we show for the first time that glassy amorphous perfluoropolymers (PFPs, such as Teflon AF and Hyflon AD) can be fabricated into ultrathin film composite (uTFC) membranes with a selective layer of <20nm for desalination. Increasing the polymer concentration in the coating solutions from 0.05 mass% to 0.3 mass% increases the selective layer thickness from 9 to 25nm. When Teflon AF2400 was fabricated into 16-nm selective layers on various porous supports, the water permeance decreases from 0.37 LMH/bar for PES10k to 0.07 LMH/bar for PES1k, and the Na 2 SO 4 rejection increases from 86.6% to 95.2%. While the water permeance is lower than the commercial PA-based NF membranes, the rejection in these PFP-based membranes is comparable. Furthr, the effect of the porous support on the water permeance can be ascribed to the geometric restriction and satisfactorily described using an empirical model. Interestingly, the membranes also exhibit good Na + /Li + separation performance and stable performance for organic solvent nanofiltration, showcasing the versatility of the PFP-based uTFC membranes for various liquid separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resin chemistry and particle size influence on stereolithography with silicon carbide

Stereolithography (SLA) is an established process able to produce high resolution polymer parts with complex geometries. Silicon carbide (SiC) has uses in a variety of applications, but traditionally was difficult to manufacture into complex geometries. There have been advances in producing SiC through SLA using a SiC-derived ceramic such as silicon oxycarbide (SiOC). In this study, a slurry using a commercially available resin as the base material with additional modifiers was investigated to create a SiC slurry ready for pressureless sintering. The effects of photoinitiator, dispersant and a bimodal distribution of SiC particle sizes was studied using a design of experiments (DOE). A slurry with a bimodal distribution of 70 % coarse and 30 % fine SiC powder at 40 % solids loading by volume was prepared and successfully printed. Rheology measurements show the slurry to have viscoelastic shear thinning behavior below the recommended 1000 Pas necessary for printing. Printing parameters for the new material on a commercially available SLA printer were studied parametrically. The laser marking speeds found to print the slurry was 260 mm/s and 130 mm/s. A slurry and printing parameters were determined to produce a green part with a proposed debinding cycle.

Herd, Tien [ORNL]↗