Search NASA⌕ Search

SEARCH · Search NASA

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Permittivity effects of particle agglomeration in ferroelectric ceramic-epoxy composites using finite element modeling

Here, the size dependence of the dielectric constants of barium titanate or other ferroelectric particles can be explored by embedding particles into an epoxy matrix whose dielectric constant can be measured directly. However, to extract the particle dielectric constant requires a model of the composite medium. We compare a finite element model for various volume fractions and particle arrangements to several effective medium approximations, which do not consider particle arrangement explicitly. For a fixed number of particles, the composite dielectric constant increases with the degree of agglomeration, and we relate this increase to the number of regions of enhanced electric field along the applied field between particles in an agglomerate. Additionally, even for dispersed particles, we find that the composite method of assessing the particle dielectric constant may not be effective if the particle dielectric constant is too high compared to the background medium dielectric constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Complex permittivity measurements of lunar samples at microwave and millimeter wavelengths

The relative dielectric constant and loss tangent of lunar sample 14163,164 (fine dust) were determined as a function of density at 9.375, 24, 35, and 60 GHz. In addition, such measurements have also been performed on lunar sample 14310,74 (solid rock) at 9.375 GHz. The loss tangent was found to be frequency independent at these test frequencies and had a value of 0.015 for the lunar dust sample.

Bassett, H. L.↗

Complex permittivity measurements during high temperature recycling of space shuttle antenna window and dielectric heat shield materials

The research performed and the data obtained on candidate space shuttle antenna window and heat shield materials are presented. The measurement technique employs a free-space focused beam microwave bridge for obtaining RF transmission data, and a device which rotates a sample holder which is heated on one side by natural gas-air flames. The surface temperature of each sample is monitored by IR pyrometry; embedded and rear surface thermocouples are also used in obtaining temperature data. The surface of the sample undergoing test is subjected to approximately the same temperature/time profile that occurs at a proposed antenna position on the space shuttle as it re-enters. The samples are cycled through ten of these temperature profiles to determine the recycling effects. Very little change was noted in the materials due to the recycling.

Bassett, H. L.↗

An empirical model for the complex dielectric permittivity of soils as a function of water content

The recent measurements on the dielectric properties of soils shows that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value of transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of ths soil-water mixtures. The relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗

Permittivity of ice and water at millimeter wavelengths

Measurements of reflectivity of water and ice at 100 GHz, 140 GHz, and 180 GHz are reported. Measurements on water covered the temperature range 0 C to 50 C. No anomalies in the dielectric properties of water due to the presence of either salts or organic matter were found. The reflectivity of water and its temperature dependence are consistent with recent dielectric property models derived from data at other wavelengths. The index of refraction of fresh ice is constant at 1.78 throughout this regions.

Blue, M. D.↗

An empirical model for the complex dielectric permittivity of soils as a function of water content

Recent measurements on the dielectric properties of soils have shown that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value at transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas reported in the literature were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of the soil-water mixtures. This model employs the mixing of either the dielectric constants or the refraction indices of ice, water, rock, and air, and treats the transition moisture value as an adjustable parameter. The calculated mixture dielectric constants from the model were found to be in reasonable agreement with the measured results over the entire moisture range of 0-0.5 cu cm/cu cm. The transition moistures derived from the model range from 0.16 to 0.33 and are strongly correlated with the wilting points of the soils estimated from their textures. This relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗

Anisotropy of the permittivity field inferred from aspect-sensitive radar echoes

An attempt is made to draw some quantitative conclusions regarding the anisotropy of the clear-air back-scattering mechanism based on the measured variation of echo power with zenith angle. The measurements were made by the SOUSY group of the Max Planck Institute for Aeronomy at Lindau, FRG. They installed their 47-MHz transmitter and antenna feed in the 300-meter diameter reflector at Arecibo. The resulting 1.7-degree beam was stepped successively through seven 1.7-degree intervals from 1.7 to 11.7 degrees in zenith angle, obtaining about four minutes of data at each setting. This procedure was carried out in an eastward pointing azimuth and in a northward pointing azimuth, the entire set of measurements consuming an hour and twenty minutes. Range resolution was 150 meters.

Waterman, A. T.↗

Characteristic Impedance of a Wide Slot Line on Low Permittivity Substrates

Computed results on the characteristic impedance of wide slots etched on an electrically thin substrate of low dielectric constant epsilon sub r are presented. Results are given for epsilon sub r = 2.22, 3.0, 3.8 and 9.8. Comparison is shown for the characteristic impedance between the present calculations and those available in the literature for high-epsilon sub r substrates.

Janaswamy, R.↗

Characteristic impedance of a wide slot line on low permittivity substrates

Computed results on the characteristics impedance of wide slots etched on an electrically thin substrate of low dielectric constant epsilon sub r are presented. These results are used to help provide design data for slotlines. Curves are presented for epsilon sub r = 2.22, 3.0, 3.8, and 9.8. Comparison is shown for the characteristic impedance between the present calculations and those available in the literature for high-epsilon sub r substrates. Empirical formulas, based on least square curve fitting, are presented for the normalized slot wavelength lambda prime/lambda sub 0 and the characteristic impedance Z sub 0 over the range: 0.0015 is equal to or less than W/lambda sub 0 equal to or less than 1.0, 0.006 is equal to or less than d/lambda sub 0 equal to or less than 0.06, 2.22 is equal to or less than epsilon sub 0 equal to or less than 9.8.

Janaswamy, R.↗

Characteristic impedance of a wide slotline on low-permittivity substrates

Computed results on the characteristic impedance of wide slots etched on an electrically thin substrate of low dielectric constant epsilon sub r are presented. Results are given for epsilon sub r = 2.22, 3.0, 3.8 and 9.8. Comparison is shown for the characteristic impedance between the present calculations and those available in the literature for high-epsilon sub r substrates.

Janaswamy, R.↗

Application of FEM to estimate complex permittivity of dielectric material at microwave frequency using waveguide measurements

A simple waveguide measurement technique is presented to determine the complex dielectric constant of a dielectric material. The dielectric sample is loaded in a shorted x-band rectangular waveguide. Using a network analyzer; the reflection coefficient of the shorted waveguide (loaded with sample) is measured. Using the Finite Element Method (FEM), the exact reflection coefficient of the shorted waveguide (loaded with sample) is determined as a function of the dielectric constant. Matching the measured value of the reflection coefficient with the reflection coefficient calculated using the FEM utilizing the Newton-Raphson Method, an estimate of the dielectric constant of a dielectric material is obtained. A comparison of estimated values of dielectric constant obtained from simple waveguide modal theory and the present approach is presented.

Deshpande, M. D.↗

Estimation of Complex Permittivity of Composite Multilayer Material at Microwave Frequency Using Waveguide Measurements

A simple method is presented to estimate the complex dielectric constants of individual layers of a multilayer composite material. Using the MatLab Optimization Tools simple MatLab scripts are written to search for electric properties of individual layers so as to match the measured and calculated S-parameters. A single layer composite material formed by using materials such as Bakelite, Nomex Felt, Fiber Glass, Woven Composite B and G, Nano Material #0, Cork, Garlock, of different thicknesses are tested using the present approach. Assuming the thicknesses of samples unknown, the present approach is shown to work well in estimating the dielectric constants and the thicknesses. A number of two layer composite materials formed by various combinations of above individual materials are tested using the present approach. However, the present approach could not provide estimate values close to their true values when the thicknesses of individual layers were assumed to be unknown. This is attributed to the difficulty in modelling the presence of airgaps between the layers while doing the measurement of S-parameters. A few examples of three layer composites are also presented.

Deshpande, Manohar D.↗