Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES - BUCKLING, RECTANGULAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

On the radiation of sound from baffled finite panels

Theoretical and experimental research on structural-acoustic interaction is reviewed. The emphasis is upon the radiation from and acoustic loading of baffled rectangular plates and membranes. The topics discussed include a criterion for strong radiation loading, the mass law for a finite panel, numerical calculation of the radiation impedance of a finite panel in the presence of a parallel mean flow, and experimental determination of the effect of vibration amplitude and Mach number upon panel radiation efficiency.

Leehey, P.↗
NASA NTRS1978

Dynamic response and input identification of MDOF structures subjected to coupled random vector inputs

A method of random dynamic analysis is presented which is based on the classical approach applied to a discretized structure. The method assumes that the system identification is available in the form of natural modes and frequencies. These modes and frequencies can be found from either available solutions or approximately from finite element programs. A computer program has been developed to perform the computations required in the analysis. All computations are performed with transformed modal variables, which results in significant economy since the number of modal degrees of freedom is almost always less than the number of physical degrees of freedom. The program computes the response to force and base inputs which are statistically coupled. A method is also presented for predicting one of the inputs if the second input and the acceleration response at a point on the structure are known. Finally, results are presented for the random response of a rectangular plate subjected to a random pressure and a random base input. The inputs are considered individually and with various degrees of statistical coupling.

Ocallahan, J. C.↗
NASA NTRS1981

Microstructure and mechanical properties of bulk yttria-partially-stabilized zirconia

A commercially available bulk 4.5 mole percent yttria-(Y2O3) partially stabilized zirconia (PSZ) was studied by light microscopy, X-ray analysis, microhardness measurement, and fracture toughness testing. The growth of the precipitates and the phase transformations were studied as a function of aging in air at 1500 C. Aging curves were constructed for both the as received and the solution annealed and quenched materials; the curves showed hardness peaks at 1397 and 1517 Kg/sq mm respectively. The rectangular plate shaped tetragonal precipitates were found to have a 110 habit plane. A total of twelve different types of tetragonal precipitates were found. Grinding of the Y2O3 PSZ into powder did not cause a significant amount of metastable tetragonal precipitates to transform into the monoclinc phase, thus indicating that transformation toughening is not a significant mechanism for the material.

Valentine, P. G.↗
NASA NTRS1981

Large modal survey testing using the Ibrahim time domain /ITD/ identification technique

The ability of the ITD identification algorithm in identifying a complete set of structural modal parameters using a large number of free-response time histories simultaneously in one analysis, assuming a math model with a high number of degrees-of-freedom, has been studied. Identification results using simulated free responses of a uniform rectangular plate, with 225 measurement stations, and experimental responses from a ground vibration test of the Long Duration Exposure Facility (LDEF) Space Shuttle payload, with 142 measurement stations, are presented. As many as 300 degrees-of-freedom were allowed in analyzing these data. In general, the use of a significantly oversized math model in the identification process was found to maintain or increase identification accuracy and to identify modes of low response level that are not identified with smaller math model sizes. The concept of a Mode Shape Correlation Constant is introduced for use when more than one identification analysis of the same structure are conducted. This constant quantifies the degree of correlation between any two sets of complex mode shapes identified using different excitation conditions, different user-selectable algorithm constants, or overlapping sets of measurements.

Ibrahim, S. R.↗
NASA NTRS1982

Numerical evaluation of the Rayleigh integral for planar radiators using the FFT

Rayleigh's integral formula is evaluated numerically for planar radiators of any shape, with any specified velocity in the source plane using the fast Fourier transfrom algorithm. The major advantage of this technique is its speed of computation - over 400 times faster than a straightforward two-dimensional numerical integration. The technique is developed for computation of the radiated pressure in the nearfield of the source and can be easily extended to provide, with little computation time, the vector intensity in the nearfield. Computations with the FFT of the nearfield pressure of baffled rectangular plates with clamped and free boundaries are compared with the 'exact' solution to illuminate any errors. The bias errors, introduced by the FFT, are investigated and a technique is developed to significantly reduce them.

Williams, E. G.↗
NASA NTRS1984

Strength evaluation test of pressureless-sintered silicon nitride at room temperature

In order to study strength characteristics at room temperature and the strength evaluating method of ceramic materials, the following tests were conducted on pressureless sintered silicon nitride specimens: bending tests, the three tensile tests of rectangular plates, holed plates, and notched plates, and spin tests of centrally holed disks. The relationship between the mean strength of specimens and the effective volume of specimens are examined using Weibull's theory. The effect of surface grinding on the strength of specimens is discussed.

Matsusue, K.↗
NASA NTRS1983

Control structure interactions in large space structures Analysis using energy approach

A simple energy approach to study the problem of control structure interactions in large space structures is presented. For the illustrative cases of free-free beam and free rectangular plate, the vibrational energy imparted during operation of constant and pulsed thrusters is found in a nondimensional form. Then based on a parametric study, suggestions are made on the choice of the thruster location and parameters to minimize the control structure interactions.

Shrivastava, S. K.↗
NASA NTRS1984

Characteristic boundary conditions for three-dimensional transonic unsteady aerodynamics

Characteristic far-field boundary conditions for the three-dimensional unsteady transonic small disturbance potential equation have been developed. The boundary conditions were implemented in the XTRAN3S finite difference code and tested for a flat plate rectangular wing with a pulse in angle of attack; the freestream Mach number was 0.85. The calculated force response shows that the characteristic boundary conditions reduce disturbances that are reflected from the computational boundaries.

Whitlow, W., Jr.↗
NASA NTRS1985

Nonlinear quasi-fracture behavior of polymers

This paper deals with the nonlinear quasi-fracture behavior of polymers. Using the finite element method, the quasi-fracture model composed of an isolated craze opening with a nonlinear boundary envelope forces represented by oriented fibril domains is analyzed in simply-stressed rectangular plate. The stress distribution, the displacement profile, as well as the yield or plastic or flow zone adjacent to the craze tips are obtained. It is found that the variation of the stress distribution near the craze tip is not as sharp as that for an elastic crack. The initial load required for yielding or flowing is greater for the quasifracture as compared with that for a classical fracture. Under the same load the yield or flow zone is somewhat smaller as compared with that obtained on the basis of linear elastic-plastic fracture mechanics theory.

Sun, B. N.↗
NASA NTRS1985

A study of plasma expansion phenomena in laboratory generated plasma wakes - Preliminary results

The plasma expansion into the wake of a large rectangular plate immersed in a single-ion, collisionless, streaming plasma has been investigated in the laboratory. Several characteristics of the process involved in 'plasma expansion into vacuum' that have been predicted theoretically were observed, including the creation and motion of a rarefaction wave disturbance; the creation and motion of an expansion front; and the acceleration of ions into the wake at speeds above the ion-acoustic speed. The expansion was limited to early times; i.e., a few ion plasma periods, by the combination of plasma drift speed and vacuum chamber size. This prevented detailed comparison with self-similar theory, but results are in good agreement with numerical simulations and other laboratory experiments for the early time expansion. The conclusion is that the plasma expansion process is the dominant wake filling mechanism in the near wake of a body, whose potential is approximately the plasma space potential.

Wright, K. H., Jr.↗
NASA NTRS1985

Statistical Signal Analysis for Systems with Interferenced Inputs

A new approach is introduced, based on statistical signal analysis, which overcomes the error due to input signal interference. The model analyzed is given. The input signals u sub 1 (t) and u sub 2 (t) are assumed to be unknown. The measurable signals x sub 1 (t) and x sub 2 (t) are interferened according to the frequency response functions, H sub 12 (f) and H sub 21 (f). The goal of the analysis was to evaluate the power output due to each input, u sub 1 (t) and u sub 2 (t), for the case where both are applied to the same time. In addition, all frequency response functions are calculated. The interferenced system is described by a set of five equations with six unknown functions. An IBM XT Personal Computer, which was interfaced with the FFT, was used to solve the set of equations. The software was tested on an electrical two-input, one-output system. The results were excellent. The research presented includes the analysis of the acoustic radiation from a rectangular plate with two force inputs and the sound pressure as an output signal.

Bai, R. M.↗
NASA NTRS1985

Large Modal Survey Testing Using the Ibrahim Time Domain Identification Technique

The ability of the ITD identification algorithm in identifying a complete set of structural modal parameters using a large number of free-response time histories simultaneously in one analysis, assuming a math model with a high number of degrees-of-freedom, has been studied. Identification results using simulated free responses of a uniform rectangular plate, with 225 measurement stations, and experimental responses from a ground vibration test of the Long Duration Exposure Facility (LDEF) Space Shuttle payload, with 142 measurement stations, are presented. As many as 300 degrees-of-freedom were allowed in analyzing these data. In general, the use of a significantly oversized math model in the identification process was found to maintain or increase identification accuracy and to identify modes of low response level that are not identified with smaller math model sizes. The concept of a Mode Shape Correlation Constant is introduced for use when more than one identification analysis of the same structure are conducted. This constant quantifies the degree of correlation between any two sets of complex mode shapes identified using different excitation conditions, different user-selectable algorithm constants, or overlapping sets of measurements.

Ibrahim, S. R.↗
NASA NTRS1986

A combined integrating and differentiating matrix formulation for boundary value problems on rectangular domains

Integrating and differentiating matrices allow the numerical integration and differential of functions whose values are known at points of a discrete grid. Previous derivations of these matrices were restricted to one dimensional grids or to rectangular grids with uniform spacing in at least one direction. Integrating and differentiating matrices were developed for grids with nonuniform spacing in both directions. The use of these matrices as operators to reformulate boundary value problems on rectangular domains as matrix problems for a finite dimensional solution vector is considered. The method requires nonuniform grids which include near boundary points. An eigenvalue problem for the transverse vibrations of a simply supported rectangular plate is solved to illustrate the method.

Lakin, W. D.↗
NASA NTRS1985

Application of the finite element method in the calculation of transmission loss of flat and curved panels

This investigation represents an extension of a study of Roussos (1985) who considered the noise transmission loss of a rectangular plate in an infinite baffle. Roussos, who employed an analytical formulation, considered an unstiffened plate. While it is difficult to consider stiffeners by means of analytical methods, the difficulties can be avoided by employing a finite element procedure. For this reason, the present study is concerned with the implementation of a finite element method. The representation of the panel transmission loss is discussed, and the determination of the panel motion by means of the finite element technique is described, taking into account an isotropic flat panel, the exciting force, an eigenvalue problem, the radiation pressure, a plate element, and a cylindrical shell element. Numerical results are considered for a flat panel, a curved panel, and a stiffened flat panel.

Koval, L. R.↗
NASA NTRS1986

A combined integrating- and differentiating-matrix formulation for boundary-value problems on rectangular domains

Integrating and differentiating matrices allow the numerical integration and differential of functions whose values are known at points of a discrete grid. Previous derivations of these matrices were restricted to one dimensional grids or to rectangular grids with uniform spacing in at least one direction. Integrating and differentiating matrices were developed for grids with nonuniform spacing in both directions. The use of these matrices as operators to reformulate boundary value problems on rectangular domains as matrix problems for a finite dimensional solution vector is considered. The method requires nonuniform grids which include near boundary points. An eigenvalue problem for the transverse vibrations of a simply supported rectangular plate is solved to illustrate the method.

Lakin, W. D.↗
NASA NTRS1988

A study of single and binary ion plasma expansion into laboratory-generated plasma wakes

Plasma expansion into the wake of a large rectangular plate immersed in a collisionless, supersonic plasma was investigated in laboratory experiments. The experimental conditions address both single ion and binary ion plasma flows for the case of a body whose size is large in comparison with the Debye length, when the potential difference between the body and the plasma is relatively small. A new plasma source was developed to generate equi-velocity, binary ion plasma flows, which allows access to new parameter space that have previously been unavailable for laboratory studies. Specifically, the new parameters are the ionic mass ratio and the ionic component density ratio. In a series of experiments, a krypton-neon plasma is employed where the ambient density ratio of neon to krypton is varied more than an order of magnitude. The expansion in both the single ion and binary ion plasma cases is limited to early times, i.e., a few ion plasma periods, by the combination of plasma density, plasma drift speed, and vacuum chamber size, which prevented detailed comparison with self-similar theory.

Wright, Kenneth Herbert, Jr.↗
NASA NTRS1988

A selective modal scheme for the analysis of EM coupling into or radiation from large open-ended waveguides

A selective modal scheme is proposed to efficiently analyze the problem of high-frequency (HF) electromagnetic (EM) coupling/penetration into or radiation from open-ended waveguides. This scheme is based on the phenomenon that at sufficiently high frequencies, the modes which contribute most significantly to the fields coupled into the waveguide are those whose modal ray directions are most nearly parallel to the incident-wave direction. This concept is illustrated by calculating the EM radiation and backscattering from open-ended parallel-plate, rectangular, circular, and sectoral waveguide geometries. The calculations use the usual geometrical optics, aperture field, and Ufimtsev edge current techniques. Also included are some measured results which further verify the accuracy of the above computations.

Altintas, Ayhan↗
NASA NTRS1989

Eigensolution of finite element problems in a completely connected parallel architecture

A parallel algorithm is presented for the solution of the generalized eigenproblem in linear elastic finite element analysis. The algorithm is based on a completely connected parallel architecture in which each processor is allowed to communicate with all other processors. The algorithm is successfully implemented on a tightly coupled MIMD parallel processor. A finite element model is divided into m domains each of which is assumed to process n elements. Each domain is then assigned to a processor or to a logical processor (task) if the number of domains exceeds the number of physical processors. The effect of the number of domains, the number of degrees-of-freedom located along the global fronts, and the dimension of the subspace on the performance of the algorithm is investigated. For a 64-element rectangular plate, speed-ups of 1.86, 3.13, 3.18, and 3.61 are achieved on two, four, six, and eight processors, respectively.

Akl, F.↗