Search NASA⌕ Search

SEARCH · Search NASA

Results for “POTENTIAL PROBLEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Photovoltaic power system reliability considerations

This paper describes an example of how modern engineering and safety techniques can be used to assure the reliable and safe operation of photovoltaic power systems. This particular application was for a solar cell power system demonstration project in Tangaye, Upper Volta, Africa. The techniques involve a definition of the power system natural and operating environment, use of design criteria and analysis techniques, an awareness of potential problems via the inherent reliability and FMEA methods, and use of a fail-safe and planned spare parts engineering philosophy.

Lalli, V. R.↗
NASA NTRS1980

An airborne system for detection of volcanic surface deformations

A technique is proposed for measuring volcanic deformation on the order of centimeters per day to centimeters per year. An airborne multifrequency pulsed radar, tracking passive ground reflectors spaced at 1 kilometer intervals over a 50 square kilometer area is employed. Identification of targets is accomplished by Doppler and range resolution techniques, with final relative position measurements accomplished by phase comparison of multifrequency signals. Atmospheric path length errors are corrected by an airborne refractometer, meteorological instruments, or other refractive index measuring devices. Anticipated system accuracy is 1-2 cm, with measuring times on the order of minutes. Potential problems exist in the high intrinsic data assimilation rate required of the system to overcome ground backscatter noise.

Lunine, J.↗
NASA NTRS1979

NOSS flight segment concept study

An 11 ft wide by 26.5 ft long flat structure weighing almost 14,469 pounds evolved during a low level, inhouse conceptual design study for a national oceanic satellite system spacecraft that would stow directly in the space shuttle. Following STS launch to a 300 Km mission orbit inclination, transfer will be effected to a 800 Km Sun synchronous circular orbit. The instrument completement includes 2 altimeters, 1 scatterometer, 1 large antenna multichannel microwave radiometer, and a coastal zone scanner. The spacecraft, its instruments, and interfaces with STS and TDRSS are described. The mission timeline, potential problem areas, system drivers, and recommended study areas are discussed. Drawings and system block diagrams are included.

Source record↗
NASA NTRS1981

The effects of trace impurities in coal-derived liquid fuels on deposition and accelerated high temperature corrosion of cast superalloys

The effects of trace metal impurities in coal-derived liquids on deposition, high temperature corrosion and fouling were examined. Alloys were burner rig tested from 800 to 1100 C and corrosion was evaluated as a function of potential impurities. Actual and doped fuel test were used to define an empirical life prediction equation. An evaluation of inhibitors to reduce or eliminate accelerated corrosion was made. Barium and strontium were found to limit attack. Intermittent application of the inhibitors or silicon additions were found to be effective techniques for controlling deposition without losing the inhibitor benefits. A computer program was used to predict the dew points and compositions of deposits. These predictions were confirmed in deposition test. The potential for such deposits to plug cooling holes of turbine airfoils was evaluated. Tests indicated that, while a potential problem exists, it strongly depended on minor impurity variations.

Lowell, C. E.↗
NASA NTRS1981

Design considerations for composite fuselage structure of commercial transport aircraft

The structural, manufacturing, and service and environmental considerations that could impact the design of composite fuselage structure for commercial transport aircraft application were explored. The severity of these considerations was assessed and the principal design drivers delineated. Technical issues and potential problem areas which must be resolved before sufficient confidence is established to commit to composite materials were defined. The key issues considered are: definition of composite fuselage design specifications, damage tolerance, and crashworthiness.

Davis, G. W.↗
NASA NTRS1981

Study of thermal management for space platform applications: Unmanned modular thermal management and radiator technologies

Candidate techniques for thermal management of unmanned modules docked to a large 250 kW platform were evaluated. Both automatically deployed and space constructed radiator systems were studied to identify characteristics and potential problems. Radiator coating requirements and current state-of-the-art were identified. An assessment of the technology needs was made and advancements were recommended.

Oren, J. A.↗
NASA NTRS1979

Terrestrial/land mobile satellite considerations, NASA plans and critical issues

This paper briefly reviews the land mobile market and discusses services that might be provided by hybrid terrestrial/land mobile satellite systems (T/LMSS). In view of the expected urban/suburban patterns of planned terrestrial systems it is suggested that a satellite may prove a cost-effective complement to terrestrial systems for serving thinly populated or large geographical areas. A basic Land Mobile Satellite Service (LMSS) is described, example applications are provided, and the status and rationale for LMSS frequencies in the 806-890 MHz band is given. Next, examples are given of NASA supported land mobile satellite experiments and a preliminary T/LMSS work plan, part of an overall Narrowband Program, is presented for structuring future work. The initiation of the T/LMSS plan depends on pending management/budget decisions. The report closes with a listing of issues and potential problem areas, the solutions of which NASA believes are critical to the success of the proposed T/LMSS effort.

Knouse, G. H.↗
NASA NTRS1981

Retrieval of thermodynamic variables with deep convective clouds Experiments in three dimensions

A three-dimensional numerical cloud model has been used to test a method for retrieving temperature and pressure deviation fields from detailed wind and water fields in deep convective clouds. A comparison of the retrieved fields with the output from the numerical model was used to test the validity of the theoretical treatment and accuracy of the programming. The local time derivatives of each of the velocity components are known to be potential problem sources in using Doppler radar data, and a test was done with this derivative estimated over a 4 min time span rather than 30 s, resulting in excellent agreement with the original solution for this data set. When the local derivative was eliminated, the solution was judged useful for general temperature patterns. Errors due to the inability to measure cloudwater mixing ratio and inaccuracies in rainwater mixing ratio were found to be significant, but not so severe as in the turbulence and steady-state sensitivity tests.

Hane, C. E.↗
NASA NTRS1981

System analysis approach to deriving design criteria (loads) for Space Shuttle and its payloads. Volume 1: General statement of approach

Space shuttle, the most complex transportation system designed to date, illustrates the requirement for an analysis approach that considers all major disciplines simultaneously. Its unique cross coupling and high sensitivity to aerodynamic uncertainties and high performance requirements dictated a less conservative approach than those taken in programs. Analyses performed for the space shuttle and certain payloads, Space Telescope and Spacelab, are used a examples. These illustrate the requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements control requirements and the resulting design verification approaches. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.

Ryan, R. S.↗
NASA NTRS1981

System analysis approach to deriving design criteria (Loads) for Space Shuttle and its payloads. Volume 2: Typical examples

The achievement of an optimized design from the system standpoint under the low cost, high risk constraints of the present day environment was analyzed. Space Shuttle illustrates the requirement for an analysis approach that considers all major disciplines (coupling between structures control, propulsion, thermal, aeroelastic, and performance), simultaneously. The Space Shuttle and certain payloads, Space Telescope and Spacelab, are examined. The requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements, control requirements, and the resulting design verification approaches are illustrated. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.

Ryan, R. S.↗
NASA NTRS1982

Thunderstorm electric field modelling

Calculation of eletric field vectors within and near an isolated thundercloud (which has a given volume charge distribution) is envisaged. The maximum field strength within the thundercloud is calculated. The effects of screening layers, both above and below the thundercloud may be investigated, as well time-dependent potential problem. The study can lead to a better understanding of the charge distributions in a thundercloud, which in turn may shed some light on the actual mechanism of charging of a thundercloud.

Tan, A.↗
NASA NTRS1980

SPS issues: The need to look ahead

The need for a systemic examination of SPS for the purpose of identifying potential problem areas and the issues related to those areas, is considered. The use of a systemic approach, a valuable perspective from which to evaluate SPS implementation as a reliable, safe, and cost efficient energy supply of the future, is discussed.

Dybdal, K. K.↗
NASA NTRS1981

Selection of the Australian indicator region

Each Australian state was examined for the availability of LANDSAT data, area, yield, and production characteristics, statistics, crop calendars, and other ancillary data. Agrophysical conditions that could influence labeling and classification accuracies were identified in connection with the highest producing states as determined from available Australian crop statistics. Based primarily on these production statistics, Western Australia and New South Wales were selected as the wheat indicator region for Australia. The general characteristics of wheat in the indicator region, with potential problems anticipated for proportion estimation are considered. The varieties of wheat, the diseases and pests common to New South Wales, and the wheat growing regions of both states are examined.

Reed, C. R.↗
NASA NTRS1981

Containment materials: Status and summary

The hydrogen containment materials are studied. The safe, reliable, and economic containment of hydrogen is essential to the success of virtually any hydrogen energy transport and storage scheme. The potential problems associated with hydrogen containment are presented.

Nelson, H. G.↗
NASA NTRS1982

Low and medium heating value coal gas catalytic combustor characterization

Catalytic combustion with both low and medium heating value coal gases obtained from an operating gasifier was demonstrated. A practical operating range for efficient operation was determined, and also to identify potential problem areas were identified for consideration during stationary gas turbine engine design. The test rig consists of fuel injectors, a fuel-air premixing section, a catalytic reactor with thermocouple instrumentation and a single point, water cooled sample probe. The test rig included inlet and outlet transition pieces and was designed for installation into an existing test loop.

Schwab, J. A.↗
NASA NTRS1981

Ni partitioning between diopside and silicate melt - A redetermination by ion microprobe and recognition of an experimental complication

The capabilities of and potential problems with ion microprobe analysis are illustrated in the determination of Ni distribution between silicate melt and diopside as a function of concentration. Samples of diopside and a melt in the albite-anorthite-diopside system were doped with Ni to levels of 5.22 and 1.08 wt % and 1060, 138, 42 and 30 ppm, and with 3 ppm of Ni-63, and characterized by both electron and ion microprobe techniques. Measurements of Ni-62 distribution by the ion probe method give a ratio of 1.87 for the ratio of count rates in the diopsides with the glass, which is slightly lower than the value of 2.05 obtained from beta-track mapping. The measurements required the secondary ion signal to be linear with concentration in the range measured, and a calibration to correct for differential secondary ion yields from different phases. It is found, however, that partition coefficients measured for Ni-58 and Ni-60 are not constant with Ni concentration, probably due to Ni migration during crystallization. The results thus show ion microprobe analyses to be feasible for simultaneous measurements of distributions of more than one element, and of elements inappropriate for beta-track mapping or electron probe analysis.

Steele, I. M.↗