Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panel method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Linkages between riverine flooding risk and economic damage over the continental United States

Economic damages from riverine flooding are expected to grow because of climate change. Yet, there are few 7 studies analyzing flooding damages in the U.S. that clearly measure the roles of hazard, exposure, and vulnerability 8 separately and locally. A lack of this knowledge prohibits spatially detailed predictions of future damages. By being 9 able to separate into these three risk factors, we provide all necessary inputs for uncertainty analysis of the flooding-10 damages forecasts that can incorporate new predictive scenarios for each component. To analyze the flooding risk 11 factors of non-coastal counties within the contiguous U.S. between 1999-2018, we gathered information on (1) 12 property and human damages from flooding, (2) maximum annual river discharge, (3) the number of housing units 13 and the years in which they were built, and (4) the incidence of flooding events. We used the method of trimmed 14 least absolute deviated and trimmed least square estimators to obtain the individual impact of hazard, exposure, and 15 vulnerability in the context of censored flooding damages for panel data. The resulting estimates indicate that 16 exposure has been the main driver of flooding risk for most counties in the U.S. Here, we use these estimates to describe 17 the main source of flooding risk for non-coastal counties for the 1999-2018 period.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Nishati Prototype 72-Cell Endurance Modules (Test Report)

US Manufacturer Nishati provided three prototype, 72-cell photovoltaic modules to Sandia for characterization under the US Department of Energy Small Business Voucher program. Nishati is developing the Endurance © product to address the stringent requirements associated with PV system installations sited near airports and military bases. These prototype modules are uniquely constructed of a polymeric matrix and an internal honeycomb structural element. Target features of the module design are reduced reflectivity from the front surface and reduced weight. Sandia applied a variety of in-house characterization methods to these modules with the goal of validating performance and identifying any areas for improvement. Reflectance testing revealed extremely low specular reflection, dramatically surpassing the performance of industry standard PV panels. Electrical performance testing validated performance in line with expectations for similar size and power class modules. Complimentary to reflection testing, outdoor angle of incidence testing indicated performance far exceeding expectations for industry standard PV panels. It is possible that the extremely low reflectance properties of these modules will convey an advantage in annual energy production in comparison to industry standard modules. Detailed performance modeling and experimental field validation would be required to verify this possible advantage. During the course of this testing, no obvious deficiencies in this module design were discovered. It is recommended that Nishati and Sandia proceed to the final Task associated with the SBV award. This final task will involve fielding modules at Sandia for reliability and energy production validation.

14 SOLAR ENERGY↗
DOE OSTI2022

Task 12 PV Sustainability - Mineral Resource Use Footprints of Residential PV Systems

Resource use intensity is often mentioned as one of the main characteristics of PV systems and PV electricity. Recently, the International Energy Agency published a report on the role of critical minerals in clean energy transitions. The Product Environmental Footprint pilot study on PV electricity quantified (among other environmental impacts) its abiotic depletion potential. So far, a comprehensive assessment of resource use impacts highlighting the different facets of its impacts is however lacking. For the first time, the resource use impacts of PV electricity are quantified simultaneously with four impact category indicators recommended or suggested by the Life Cycle Initiative hosted at UN Environment. The indicators cover distinctly different aspects of resource use, namely resource depletion with the Abiotic Depletion Potential, ultimate reserves (ADP UR ), economic resource scarcity with the Abiotic Depletion Potential, economic reserves (ADP ER ), resource quality with the Surplus Ore Potential, Ultimate Recoverable Resources (SOP URR ) and re-source criticality with the ESSENZ method. The resource use impacts caused from the generation of 1 kWh electricity with a residential scale photovoltaic (PV) system installed in Central Europe using mono- and multi-crystalline silicon panels and CdTe panels, respectively are quantified. The product system includes manufacture, use and end of life treatment (take back and recycling) of the PV panels, cabling, inverter and supporting structure, the supply chains of the raw materials and energy used in PV panel and inverter manufacture as well as transport logistics.

14 SOLAR ENERGY↗
DOE OSTI2022

Artificial Intelligence/Machine Learning Technologies for Advanced Reactors (Workshop Summary Report)

A workshop on artificial intelligence and machine learning (AI/ML) for advanced reactors (AR) was held October 5-6, 2021. The workshop was to be attended in-person at ANL but COVID restrictions forced the workshop to go virtual. The objectives of the workshop were to identify the most promising AI/ML opportunities for improving advanced reactor design, optimizing plant performance, and enhancing economic competitiveness and to develop an understanding of the scientific, engineering and licensing challenges facing their application. The workshop planning committee included GAIN, EPRI and NEI and members of three national laboratories (ANL, INL, and ORNL). The workshop was attended by more than 200 individuals representing academic and scientific institutions and the nuclear power industry. The definition put forth for an AI/ML system was one that perceives its environment and takes actions that maximize its chance of achieving its goals. In this report AI/ML refers to next generation algorithms that include deep learning, statistical analysis and data analytics and associated scientific computing and their potential application to the design, licensing, operation and maintenance of ARs. These methods typically incorporate models built from process data and may also include data generated by simulations that represent the behavior of a system. The workshop was organized in response to the growing interest in application of AI/ML for improving the economic competitiveness of nuclear energy. Increasingly more resources are being allocated to investigating the benefits of AI/ML methods. The DOE created the Artificial Intelligence & Technology Office to promote their development. And within the Office of Nuclear Energy, resources have been allocated to explore and understand the potential benefits of AI/ML. Additionally, the national laboratories are strategically positioned with DOE computing facilities such as Summit, Perlmutter, Aurora and Frontier that support large-scale simulations, hybrid HPC models with AI surrogates, and the exploration of new types of generative models emerging from multi-model data streams and sources. The workshop was organized with members of the AR community to understand the effort and to identify the level of interest and progress in this emerging technology. The workshop discussions focused on identifying opportunities for AI/ML across diverse areas of the nuclear industry and identifying current scientific and engineering challenges for advanced reactors that might be addressed through transformational uses of AI/ML. Discussion panels focused on four high-interest technical domains for advanced reactors: design, maintenance and operations, energy storage, and materials. The results of those discussions are summarized in this report. This includes opportunities that were identified for exploiting AI techniques and methods to improve the efficacy and efficiency of reactor analysis and to improve the operation and optimization of advanced reactors. Advanced reactor developers expressed an interest in learning more about AI/ML methods and their application. This included understanding whether ML methods can provide an advantage over existing nonlinear data regression methods for collapsing high-fidelity simulation results into faster running models. A consensus emerged that AR advances planned for the next decade will benefit from the use of AI/ML tools. The need exists to understand and model complex systems across length scales and modalities. AI/ML is a tool for discovery that can yield a set of engineering principles for use by nuclear engineers, licensing bodies, and operators to solve problems in plant design, safety analyses, autonomous operation, and predictive maintenance. While AI/ML represents a new set of tools, an awareness by the nuclear community of the full potential is still in the early stages so there is a need to increase awareness. It appears that the wide-spread adoption of AI/ML tools for ARs would be facilitated by future educational workshops that describe foundational methods and capabilities and describe successful applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Solvent-free, solid phase synthesis of hybrid lead halide perovskites with superior purity

A method of synthesizing a mixed-halide perovskite is disclosed herein. The method includes the steps of mixing a first single-halide perovskite and a second single-halide perovskite to form a solid phase mixture and heating the solid phase mixture at a temperature below a first decomposition temperature of the first single-halide perovskite and below a second decomposition temperature of the second single-halide perovskite for a time sufficient to form the mixed-halide perovskite. During the mixing, the first and second single-halide perovskite are both in the solid phase. A mixed-halide perovskite made according to the method is also disclosed herein. The mixed-halide perovskite is free of amorphous and/or semicrystalline phases. The mixed-halide perovskite can be utilized in a photovoltaic cell in a solar panel.

Vela-Becerra, Javier↗
DOE OSTI2025

Hybridization capture sequencing for Vibrio spp. and associated virulence factors

ABSTRACT Proliferation ofVibriospp. in aquatic ecosystems is associated with climate change and, concomitantly, increased incidence of vibriosis. They are autochthonous to aquatic environments globally, but traditional metagenomic methods for detecting and typing pathogenicVibriospp. are challenged by their presence in relatively low abundance and ability to persist in a viable but nonculturable state. In the study reported here, hybridization capture sequencing (HCS) was employed to profile low-abundanceVibriospp. in environmental samples. The HCS panel targeted a family of molecular chaperones (CPN60) specific to 69Vibriospp. and 162Vibrio-specific virulence factors. This approach was evaluated in parallel with traditional whole-community shotgun sequencing in a metagenomic analysis of water and oyster samples collected from the Chesapeake Bay. In addition,Vibrio parahaemolyticusandVibrio vulnificusstrains isolated from the samples were subjected to whole-genome sequencing to determine the genetic characteristics of pathogenicVibriospp. circulating in an aquatic environment. HCS, employed to determine the incidence and characterization of specificVibriospp., yielded significantly greater metagenomic insight, notably a variety of otherVibriospp., including detection ofVibrio cholerae,Vibrio fluvialis, andVibrio aestuarianus, in addition toVibrio parahaemolyticusandVibrio vulnificus, and also important virulence factors not detectable using traditional molecular methods. Thus, pathogenicVibriospp. in aquatic ecosystems may be far more common than currently understood. It is concluded that environmental surveillance should include HCS, a valuable tool for the detection and characterization of pathogenic agents in aquatic ecosystems, notably vibrios. IMPORTANCE The increasing prevalence of pathogenicVibriospp. in aquatic ecosystems, driven by climate change, is closely linked to a rise in cholera and vibriosis cases, emphasizing the need for improved environmental surveillance. Vibrios are naturally occurring in aquatic environments globally, but traditional metagenomic methods for detecting and typing pathogenicVibriospp. are challenged by their presence in relatively low abundance and ability to persist in a viable but nonculturable state. In the study reported here, hybridization capture sequencing was employed to profile low-abundanceVibriospp. in metagenomic samples, namely water and oysters collected from the Chesapeake Bay. This approach was evaluated in parallel with traditional whole-community shotgun sequencing and whole-genome sequencing ofVibrio parahaemolyticusandVibrio vulnificusstrains isolated from the samples. Results suggest pathogenicVibriospp. in aquatic ecosystems may be far more common than currently understood, when multiple methods are considered for environmental surveillance.

Microbiology↗
DOE OSTI2021

USAMP Low-Cost Mg Sheet Component Development and Demonstration Project

The overarching objective of this USAMP project was to develop and demonstrate door panels made from magnesium (Mg) sheet with a cost penalty over conventional steel stampings of no more than $\$5.50$/kg saved. The technical approach integrated experiments with advanced computational tools based on Integrated Computational Materials Engineering (ICME) methods to develop new alloy chemistries and their thermomechanical processing that promise improved formability and lower forming temperatures. A penultimate task before finally forming the stampings was to incorporate actual microstructure into models that would enable formability simulations. This approach would, for the first time, account for individual magnesium grains moving in an anisotropic fashion unlike that for aluminum or steel that have isotropic properties upon which the current simulation tools are based. In separate activities, new coatings and lubricants to facilitate forming and improved corrosion protection and joining strategies, were developed to ensure that the door could be produced with stated product requirements. A technical cost model, which included parts production, assembly, and paint for a door specifically designed for Mg sheet, showed the cost penalty to be between $\$4.26$ to $\$6.60$/kg saved, which enveloped the project’s cost targets. The cost of the coated Mg sheet was identified as the key driver for the cost penalty. The mass of the Mg-intensive door was 7.9 kg, which was 54% less than the baseline steel door.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Low-Cost Magnesium Alloy Sheet Component Development and Demonstration Project

The overarching objective of this USAMP project was to develop and demonstrate door panels made from magnesium (Mg) sheet with a cost penalty over conventional steel stampings of no more than $5.50/kg saved. The technical approach integrated experiments with advanced computational tools based on Integrated Computational Materials Engineering (ICME) methods to develop new alloy chemistries and their thermomechanical processing that promise improved formability and lower forming temperatures. A penultimate task before finally forming the stampings was to incorporate actual microstructure into models that would enable formability simulations. This approach would, for the first time, account for individual magnesium grains moving in an anisotropic fashion unlike that for aluminum or steel that have isotropic properties upon which the current simulation tools are based. In separate activities, new coatings and lubricants to facilitate forming and improved corrosion protection and joining strategies, were developed to ensure that the door could be produced with stated product requirements. A technical cost model, which included parts production, assembly, and paint for a door specifically designed for Mg sheet, showed the cost penalty to be between 4.26 USD to 6.60 USD/kg saved, which enveloped the project’s cost targets. The cost of the coated Mg sheet was identified as the key driver for the cost penalty. The mass of the Mg-intensive door was 7.9 kg, which was 54% less than the baseline steel door.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Comparing wall performance predicted from hygrothermal simulations to wall performance measured from environmental chamber experiments

To effectively mitigate prevailing perceptions of potential moisture risks in high-R wall assemblies, a comprehensive moisture durability assessment that incorporates BA team field evaluations, lab tests and simulations has been completed over the last couple years. In FY18, three stick-built walls were succumbed to typical Chicago weather in ORNL’s Heat, Air and Moisture chamber. The measured temperature, relative humidity and moisture content within these walls were compared to WUFI hygrothermal simulation results. In FY19, similar experiments and comparison to WUFI results were completed with two walls, a Structural Insulated Panel (SIP) based wall and a Concrete Masonry Unit (CMU) based wall. The following tasks were completed for these two walls: 1. Measure air permeance of each individual wall using ASTM E283 Standard Test Method. 2.Test walls in diffusion scenario as only moisture transport mechanism and compare measured transient temperature and relative humidity of select wall components to WUFI model results. Chicago summer and weather will be investigated. 3. Test walls in wetting event scenario and compare measured transient temperature and relative humidity of select wall components with Chicago summer weather to WUFI model results. 4. Test walls in diffusion/advection scenario. In addition to controlling outdoor chamber to match real outdoor weather, a pressure differential across the wall will be varied. Measured transient temperature and relative humidity of select wall components will be compared to WUFI model results. 5. Test walls in diffusion/advection with solar heating of cladding. In addition to the variables above, IR lamps will be used to heat the cladding on a diurnal cycle. Measured transient OSB MC and temperature will be compared to WUFI model results. This report documents the experimental method, results and comparison of the measured experimental hygrothermal performance of the two walls to simulations results.

42 ENGINEERING↗
DOE OSTI2024

A New Vehicle-to-Vehicle Communication Technology Based on Binary Light Code

The proliferation of Connected and Autonomous Vehicles (CAVs) has necessitated the development of efficient, reliable communication methods between vehicles and their surroundings. This study presents a novel methodology, the VECTOR system, that addresses this need by converting dynamic vehicle data into a binary code and displaying it on an LED panel. The system involves a three-step process of data collection, polynomial fitting of velocity data, and encoding the polynomial parameters into binary form using a Cyclic Redundancy Check (CRC). The study also explores the practical application of this system by conducting experiments with modified Lincoln MKZ hybrids, demonstrating the feasibility and efficiency of this approach. The paper presents both the methodology and results of these experiments, further expanding upon the potential applications and implications for CAV technology. By comparing the final accuracy, we find this approach can achieve 80% of the original velocity data.

Ma, Ke↗
DOE OSTI2020

A Phenotarget Approach for Identifying an Alkaloid Interacting with the Tuberculosis Protein Rv1466

In recent years, there has been a revival of interest in phenotypic-based drug discovery (PDD) due to target-based drug discovery (TDD) falling below expectations. Both PDD and TDD have their unique advantages and should be used as complementary methods in drug discovery. The PhenoTarget approach combines the strengths of the PDD and TDD approaches. Phenotypic screening is conducted initially to detect cellular active components and the hits are then screened against a panel of putative targets. This PhenoTarget protocol can be equally applied to pure compound libraries as well as natural product fractions. Here we described the use of the PhenoTarget approach to identify an anti-tuberculosis lead compound. Fractions from Polycarpa aurata were identified with activity against Mycobacterium tuberculosis H37Rv. Native magnetic resonance mass spectrometry (MRMS) against a panel of 37 proteins from Mycobacterium proteomes showed that a fraction from a 95% ethanol re-extraction specifically formed a protein-ligand complex with Rv1466, a putative uncharacterized Mycobacterium tuberculosis protein. The natural product responsible was isolated and characterized to be polycarpine. The molecular weight of the ligand bound to Rv1466, 233 Da, was half the molecular weight of polycarpine less one proton, indicating that polycarpine formed a covalent bond with Rv1466.

phenotarget approach, MRMS, polycarpine, drug disc↗
DOE OSTI2019

Energy storage device and related methods

The present disclosure relates to energy storage devices having: a sealed container configured to house a plurality of energy storage devices and enable electrical communication via terminals of the sealed container and a vent located on a periphery of the sealed container. The vent generally comprises a vent panel; a countersink located adjacent the vent panel; at least one score located in the countersink; a buckling initiator at least partially located on the countersink, where the buckling initiator is configured to intersect with the at least one score; and a hinge portion attached to the vent panel, where the hinge portion is positioned opposite the buckling initiator.

Jarvis, Glenn W.↗
DOE OSTI2025

Numerical analysis of gas exhaust in Wendelstein 7-X using the direct simulation Monte Carlo method

The present work is focused on a 3D numerical assessment of the Wendelstein 7-X (W7-X) particle exhaust. For all the numerical simulations the direct simulation Monte Carlo solver of the DIVGAS workflow, has been employed. The complex 3D geometry of the sub-divertor region includes the pumping gap panel, supporting structures, cooling pipes as well as the cryo-vacuum pump. All the considered flow simulations correspond to the Standard magnetic configuration of W7-X. The main conclusions, which can be extracted from the present numerical analysis could be summarized as follows; The coupling between EMC3-EIRENE and DIVGAS, which considers the fact that the incoming neutral particle flux at the sub-divertor is based on realistic plasma background, has been demonstrated. Three plasma scenarios have been considered, for which is clearly seen that by increasing the heating power, the neutral pressure as well as the resulting pumping efficiency is increased. The obtained numerical results of the neutral pressure in the sub-divertor lie within a more general scan matrix, which assumes a wider range of incoming particle flux, namely 10 19 –10 24 (s −1 ). It has been observed that, the sub-divertor neutral pressure is proportional to the incoming neutral particle flux, with the effective pumping speed to be a constant of proportionality. The influence of switching off the cryo-vacuum pump on the sub-divertor pressure is rather modest and a weak increase of the neutral pressure in the sub-divertor is expected. Correlations of the sub-divertor pressure with the total incoming particle flux as well as the individual pumped flux at each of the AEH and AEP sections have been deduced. Moreover, it has been demonstrated that the influence of the incoming neutral particle flux on the albedo coefficient at the AEH and AEP pumping gaps is rather weak. All the above numerical findings will actively support the optimization of the W7-X particle exhaust, in view of future experimental campaigns.

DSMC method↗
DOE OSTI2024

Inactivation of highly transmissible livestock and avian viruses including influenza A and Newcastle disease virus for molecular diagnostics

There is a critical need for an inactivation method that completely inactivates pathogens at the time of sample collection while maintaining the nucleic acid quality required for diagnostic PCR testing. This inactivation method is required to alleviate concerns about transmission potential, minimize shipping complications and cost, and enable testing in lower containment laboratories, thereby enhancing disease diagnostics through improved turn-around time. This study evaluated a panel of 10 surrogate viruses that represent highly pathogenic animal diseases. These results showed that a commercial PrimeStore® molecular transport media (PSMTM) completely inactivated all viruses tested by >99.99%, as determined by infectivity and serial passage assays. However, the detection of viral nucleic acid by qRT-PCR was comparable in PSMTM and control-treated conditions. These results were consistent when viruses were evaluated in the presence of biological material such as sera and cloacal swabs to mimic diagnostic sample conditions for non-avian and avian viruses, respectively. The results of this study may be utilized by diagnostic testing laboratories for highly pathogenic agents affecting animal and human populations. These results may be used to revise guidance for select agent diagnostic testing and the shipment of infectious substances.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Parametric Study of Panel PCM–Air Heat Exchanger Designs

Heat exchangers, devices for the transfer of heat between two or more working fluids, are extensively used in cooling applications and heating applications. Heat exchangers in buildings are typically components of space-conditioning systems, as well as of water-heating applications. Heat exchangers are also sometimes used in applications that require storage and release of energy at specific times. Phase change materials (PCMs) enhance these heat-exchange processes, given their ability to melt and solidify at a fixed range of temperatures, absorbing or releasing significant amounts of latent heat. Five different configurations of PCM–air heat exchangers for thermal control in buildings are analyzed in this work. The heat exchangers were fitted with PCM encapsulated in plastic and composite pouches of various shapes, and packaged in stackable panel layers. Three-dimensional computational fluid dynamics (CFD) modeling of coupled incompressible fluid and conjugate heat transfer were performed on the designs. The phase change process was numerically modelled using the apparent heat capacity method. Steady-state CFD simulations provided quantification of pressure drop as a function of air flow velocity. Transient simulation results describe the thermal evolution of PCM in the pouches, helping to determine the best performing configuration with respect to total thermal charging time.

10 SYNTHETIC FUELS↗
DOE OSTI2021

Convection in Scaled Turbine Internal Cooling Passages With Additive Manufacturing Roughness

Abstract Additive manufacturing processes, such as direct metal laser sintering (DMLS), enable the creation of novel turbine cooling internal passages and systems. However, the DMLS method produces a significant and unique surface roughness. Previous work in scaled passages analyzed pressure losses and friction factors associated with the rough surfaces, as well as investigated the velocity profiles and turbulent flow characteristics within the passage. In this study, the heat transfer characteristics of scaled additively manufactured surfaces were measured using infrared (IR) thermography. Roughness panels were CNC machined from plates of aluminum 6061 to create near isothermal roughness elements when heated. Fluid resistance differences between the aluminum roughness panels and roughness panels constructed from ABS plastic using the same roughness patterns from McClain et al. (2020, “Flow in a Simulated Turbine Blade Cooling Channel With Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, Virtual Conference, Sept. 21–25, GT2020-16069) were investigated. Finally, the overall thermal performance enhancements and friction losses were assessed through the calculation of surface averaged “global thermal performance” ratios. The global thermal performance characterizations indicate results in-line with those found for traditional commercial roughness and slightly below traditional internal passage convection enhancement methods such as swirl chambers, dimples, and ribs. The passages investigated in this study do not include compressibility effects or the long-wavelength artifacts and channel geometric deviations observed by Wildgoose et al. (2020, “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, Virtual Conference, Sept. 21–25, GT2020-15049). However, the results of this study indicate that, based on the roughness augmentation alone, artificial convective cooling enhancers such as turbulators or dimples may still be required for additively manufactured turbine component cooling.

Engineering↗
DOE OSTI2023

Framework for Characterizing the Performance of High-Early Strength, High-Volume Fly Ash (HVFA) Concrete Structures

This presentation will highlight the development of a comprehensive framework to characterize the performance of high-volume fly ash (HVFA) concretes at early ages and discuss the resulting implications for concrete structures built using such materials. Achieving high-early compressive and/or flexural strength is often of particular importance for precast and/or prestressed concrete components – due to early age loading demands resulting from lifting, handling, or application of initial prestress – or other types of concrete structures that can significantly benefit from rapid strength development - such as for bridge deck repairs. The framework first includes a methodology for optimizing the strength of HVFA cementitious binders before subsequently scaling up the technology to evaluation of fresh and hardened HVFA concrete performance. A series of trial mix designs will be presented to demonstrate the effectiveness of the framework to achieve not only the desired high-early strength targets but also satisfactory workability, often in the form of self-consolidating concrete. Mechanical performance was evaluated at several age-dependent milestones and, in conjunction with estimating concrete strength using the maturity method, was ultimately used to facilitate the development of novel strength development history curves. By way of these datasets, concrete mechanical properties were utilized in the design of prototype structural components, such as beams and wall panels, for subjection to larger-scale experimental testing. Implications for other pertinent HVFA concrete performance attributes, such as shrinkage or creep, will also be discussed. The framework also includes a comprehensive methodology for evaluating the environmental life-cycle performance of HVFA concrete structures focused on mitigating any unwarranted environmental consequences resulting from beneficial HVFA reuse in concrete. Strategies for more widespread implementation of HVFA concrete materials into construction practice will also be presented. Lastly, the role of the HVFA concrete framework towards the development of new provisions for building codes and/or design standards, and recommendations for future research needs will also be discussed.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Wind Turbine Design Optimization for Hydrogen Production

To help meet the need for inexpensive green fuels, we are working on wind turbine design optimization specifically for hydrogen production. We have thus far achieved a 1.53% decrease in LCOH as compared to a turbine optimized for LCOE using the same code, design variables, and models. We accomplished this by optimizing some components of the wind turbine tower, rotor, and drivetrain design with hydrogen production and costs in the design loop.

hydrogen↗