SEARCH · Search NASA

Results for “Parallel connection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2021

ARENA: Asynchronous Reconfigurable Accelerator Ring to Enable Data-Centric Parallel Computing

The next generation HPC and data centers are likely to be reconfigurable and data-centric due to the trend of hardware specialization and the emergence of data-driven applications. In this work, we propose ARENA – an asynchronous reconfigurable accelerator ring architecture as a potential scenario on how the future HPC and data centers will be like. Despite using the coarse-grained reconfigurable arrays (CGRAs) as the substrate platform, our key contribution is not only the CGRA-cluster design itself, but also the ensemble of a new architecture and programming model that enables asynchronous tasking across a cluster of reconfigurable nodes, so as to bring specialized computation to the data rather than the reverse. We presume distributed data storage without asserting any prior knowledge on the data distribution. Hardware specialization occurs at runtime when a task finds the majority of data it requires are available at the present node. In other words, we dynamically generate specialized CGRA accelerators where the data reside. The asynchronous tasking for bringing computation to data is achieved by circulating the task token, which describes the dataflow graphs to be executed for a task, among the CGRA cluster connected by a fast ring network. Evaluations on a set of HPC and data-driven applications across different domains show that ARENA can provide better parallel scalability with reduced data movement (53.9 percent). Compared with contemporary compute-centric parallel models, ARENA can bring on average 4.37× speedup. The synthesized CGRAs and their task-dispatchers only occupy 2.93mm 2 chip area under 45nm process technology and can run at 800MHz with on average 759.8mW power consumption. ARENA also supports the concurrent execution of multi-applications, offering ideal architectural support for future high-performance parallel computing and data analytics systems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Development and Analysis of Optimal Multilevel Solvers on Advanced Computers. Final Report

Constrained optimization in the context of time dependent, partial differential equations (PDE) leads to a symmetric, block-tridiagonal system of nonlinear equations that must be solved repeatedly in an iterative solution strategy. The blocks represent spatial discretization, while the connection between the blocks represents a forward and backward integration in time. The focus of this project is to apply a parallel-in-time (PiT) solution technique to the large block-triangular system.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Enabling Parallel Execution of System-level Simulations in SAM

This report summarizes the recent code updates related to “element ghosting” in SAM to enable the parallel execution of system-level simulations using multiple processors/cores. Unlike typical MOOSE-based applications, for system-level simulations, SAM mostly deals with a collection of discrete small pieces of meshes, and the connection of physics on these meshes are realized by using “connector” types of components/code structures, such as conjugate heat transfer and flow junctions. The required code implementation is to correctly mark the necessary ghost elements for each type of such components/code structures; thus, the lower-level libraries can correctly perform the necessary data transfer between processors (CPUs) when executed in parallel mode. After the code updates, SAM can now run system-level simulations in the parallel mode. The parallel execution capability was then tested with an ABTR input model with 23k DOFs. Significant speedup was demonstrated when the optimal number of CPUs were used in parallel mode. Future systematic studies on parallelization performance using additional test cases covering different physics/scenarios will be needed to provide additional insights into the scalability of SAM parallelization.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Solving larger maximum clique problems using parallel quantum annealing

Quantum annealing has the potential to find low energy solutions of NP-hard problems that can be expressed as quadratic unconstrained binary optimization problems. However, the hardware of the quantum annealer manufactured by D-Wave Systems, which we consider in this work, is sparsely connected and moderately sized (on the order of thousands of qubits), thus necessitating a minor-embedding of a logical problem onto the physical qubit hardware. The combination of relatively small hardware sizes and the necessity of a minor-embedding can mean that solving large optimization problems is not possible on current quantum annealers. In this research, we show that a hybrid approach combining parallel quantum annealing with graph decomposition allows one to solve larger optimization problem accurately. We apply the approach to the Maximum Clique problem on graphs with up to 120 nodes and 6395 edges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Impact of Blockchain Delay on Grid-Tied Solar Inverter Performance

This paper investigates the impact of the delay resulting from a blockchain, a promising security measure, for a hierarchical control system of inverters connected to the grid. The blockchain communication network is designed at the secondary control layer for resilience against cyberattacks. To represent the latency in the communication channel, a model is developed based on the complexity of the blockchain framework. Taking this model into account, this work evaluates the plant’s performance subject to communication delays, introduced by the blockchain, among the hierarchical control agents. In addition, this article considers an optimal model-based control strategy that performs the system’s internal control loop. The work shows that the blockchain’s delay size influences the convergence of the power supplied by the inverter to the reference at the point of common coupling. In the results section, real-time simulations on OPAL-RT are performed to test the resilience of two parallel inverters with increasing blockchain complexity.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2022

Power Converter Circuit Design Automation using Parallel Monte Carlo Tree Search

The tidal waves of modern electronic/electrical devices have led to increasing demands for ubiquitous application-specific power converters. A conventional manual design procedure of such power converters is computation- and labor-intensive, which involves selecting and connecting component devices, tuning component-wise parameters and control schemes, and iteratively evaluating and optimizing the design. To automate and speed up this design process, we propose an automatic framework that designs custom power converters from design specifications using Monte Carlo Tree Search. Specifically, the framework embraces the upper-confidence-bound-tree (UCT), a variant of Monte Carlo Tree Search, to automate topology space exploration with circuit design specification-encoded reward signals. Moreover, our UCT-based approach can exploit small offline data via the specially designed default policy and can run in parallel to accelerate topology space exploration. Further, it utilizes a hybrid circuit evaluation strategy to substantially reduce design evaluation costs. Empirically, we demonstrated that our framework could generate energy-efficient circuit topologies for various target voltage conversion ratios. Compared to existing automatic topology optimization strategies, the proposed method is much more computationally efficient --- the sequential version can generate topologies with the same quality while being up to 67% faster. Here, the parallelization schemes can further achieve high speedups compared to the sequential version.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2023

Triaxial Shear Tests on Simulated Sierra White Fault Gouge & Borehole Simulation in Sierra White Gouge

Laboratory shear tests were conducted on pulverized Sierra White granite (SWG) to investigate slip mechanisms in naturally occurring faults. Synthetic fault geometries were constructed by sandwiching fine grained SWG powder in between steel forcing blocks. For dry experiments, ~3.5 g of SWG powder was poured onto the face of the lower steel forcing block and leveled. For saturated experiments, enough fluid was added to the ~3.5 g of Sierra White granite powder to form a slurry. This slurry was applied to the lower forcing block and leveled. Inclined forcing blocks with 25.4 mm diameter and 35° faces, which were machined from ground steel rods with fine teeth on the faces, help to hold the gouge in place and prevent delamination at the interface. The top forcing block had a 2.03 mm centered hole to allow pore fluid access to the gouge. A fine steel mesh prevented back flow of the gouge into pore fluid lines. Samples were isolated from the confining medium using three layers of heat shrink polyolefin, as shown in Figure 1. The outer layer was shrunk over the o-rings on the end caps to form an impermeable seal, which was reinforced with steel tie wires on both sides of the o-rings. Hardened steel spacers and copper shim stock was placed between the steel forcing blocks and the end caps to preserve the parallelism of the Hastelloy wetted parts. For dry samples, the end caps were plugged, while the end caps for the saturated samples were connected to pore lines.

58 GEOSCIENCES↗

DOE OSTI2022

Twist-3 partonic distributions from lattice QCD

Twist-3 partonic distributions contain important information that characterizes nucleon’s structure. In this work, we show our lattice exploration of the twist-3 PDFs g_T(x) g T ( x ) , and h_L(x) h L ( x ) . We also present our preliminary results on the twist-3 GPD \tilde{G}_2(x) G ̃ 2 ( x ) . We use the quasi-distribution approach to connect the lattice-extracted matrix elements, renormalized in the RI/MOM scheme, to light-cone distributions, applying the matching procedure that we developed in parallel. We also calculate the twist-2 counterparts of g_T(x) g T ( x ) and h_L(x) h L ( x ) , i.e. g_1(x) g 1 ( x ) , and h_1(x) h 1 ( x ) , and test the Wandzura-Wilczek approximation.

Bhattacharya, Shohini↗

DOE OSTI2020

QTENSOR

QTensor is a quantum circuit simulator designed to run efficiently in parallel mode on large supercomputers. It is based on the tensor network representation of quantum circuits. The simulator is flexible and agnostic to both the connectivity map of the quantum device and the types of gates used in the circuit.

Alekseev, Yury↗

DOE OSTI2025

Packaging a 650V/400A GaN Half-bridge Power Module with Ultra-low Parasitics for Electric Vehicle Drive Applications

This paper proposes a compact and efficient half-bridge power module with three 650 V / 150 A GaN dies in parallel. The power module incorporates a main power printed circuit board (PCB), an interface PCB, and a flex PCB to achieve low parasitics in both power loop and gate-side connection, resolving the issue of high parasitics typically encountered with wire bonding in high-current applications. Additionally, the interface PCB decouples the design constraints between the power loop and the gate loops. The proposed design is optimized with a vertical loop configuration to reduce power loop inductance through magnetic flux cancellation. Finite element analysis indicates that the power loop inductance is 0.58 nH at 100 MHz, while the maximum die junction temperature reaches 131 °C under an ambient temperature of 65 °C and a load current of 385 A. The proposed multi-piece PCB structure reduces the inductance of the drive circuit to minimize EMI and to mitigate false triggering. At the same time, it reduces impedance mismatches across different driver circuits, thereby achieving dynamic current sharing in multi-chip parallel configurations. Under simulation conditions of 400 V / 385 A, the current imbalance among chips was limited to 5 A. A 400 V / 385 A double-pulse test was conducted to experimentally validate the performance of the proposed power module.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2021

Secondary Use-Plug-and-Play Energy Storage System Composed of Multiple Energy Storage Technologies

Low-cost, grid-connectable energy storage technologies represent a significant challenge for the electric grid of the future. Energy storage technologies are in rapid development with targets to reduce the storage medium cost. However, a significant cost to deployment also comes in the integration. This paper presents the development of a plug-and-play system for supporting secondary use multiple battery systems into a single grid connectable unit. Results of the system design are demonstrated in a controller hardware in the loop (CHIL) platform. Simulations of two energy storage systems operating in parallel and dispatched optimally are presented.

Starke, Michael↗

DOE OSTI2023

Dynamic Network Analysis of Nuclear Science Literature for Research Influence Assessment

Analyzing nuclear science literature via data-driven methods is a critical step for assessing research influence and technology advancements. Indicators of scholarly activities may be buried in large volumes of nuclear research publications and collaboration networks over time. Mining for relevant scholarly influence trends in large volumes of text can be computationally challenging; however, open-source information on research collaborations over time can offer opportunities to extract meaningful insights. While network centrality analysis of scholarly research provides topology-based insights, additional emphasis on dynamics associated with the diffusion of information through these networks is important. Here this paper represents a step in that direction through the development of a novel dynamic network analysis framework and computational engine to identify key entities and capabilities over time within global scholarly nuclear science collaboration networks. Network theoretic, stochastic simulation, and optimization methods are leveraged to address variability in scholarly interactions, influence propagation, and collaboration patterns via network connections. A topic-aware influence maximization algorithm is developed to address the goal of identifying key influential authors in diverse research topics over time. Efficient parallelized implementation of the algorithm is applied to reduce computational costs. A proof-of-concept case study using open-source Scopus data with 33,517 published nuclear research papers from 2000-2019 is presented and representative analytic insights are generated. Broad implications of these insights are discussed and future research directions are also identified.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

DOE OSTI2021

Soft-switching voltage-edge-rate-limiting power inverter

An auxiliary resonant soft-edge pole inverter circuit is provided. The power inverter circuitry may include a first pair of capacitors in parallel with a corresponding pair of main power switching modules, each power switching module comprising a switch and a diode in parallel and sharing a common central node with the first pair of capacitors. The power inverter circuit may further include a first pair of auxiliary switches connected in series with a first pair of inductors, respectively, to generate resonant current from a DC power source, the first pair of inductors also sharing the common central node. The power inverter circuitry may further include a second pair of auxiliary switches connected in series with a second pair of capacitors, respectively, the second pair of auxiliary switches also sharing the common central node, the circuit producing an alternating current output at the common central node.

Wasynczuk, Oleg↗

DOE OSTI2025

Measuring and unbiasing the BAO shift in the Ly α forest with AbacusSummit

ABSTRACT The Dark Energy Spectroscopic Instrument (DESI) places sub- per cent constraints on measurements of the Baryon Acoustic Oscillation (BAO) scaling parameters from the Ly $\alpha$ forest. However, no systematic error budget stemming from non-linearities in the three-dimensional clustering of the Ly $\alpha$ forest is included in the DESI-Ly $\alpha$ analysis. In this work, we measure the size of the shift of the BAO peak using large Ly $\alpha$ forest mocks produced on the N-body simulation suite AbacusSummit, which adopt the Fluctuating–Gunn–Peterson Approximation (FGPA). Specifically, we measure the Ly $\alpha$ autocorrelation and the Ly $\alpha$-quasar cross-correlation functions. To mitigate the noise, we adopt a linear control variates technique, reducing the error bars by a factor of up to $\sim \sqrt{50}$ on large scales. From the autocorrelation, we detect a small positive shift in radial direction of $\Delta \alpha _{\parallel }= 0.35~{{\ \rm per\ cent}}$ at the 3$\sigma$ level and virtually no shift in the transverse direction, $\alpha _\perp$. From the cross-correlation, we see a similar shift to $\Delta \alpha _\parallel$, albeit with larger error bars, and a small negative shift, $\Delta \alpha _{\perp }=\sim$0.25 per cent, at the 2$\sigma$ level. We also make a connection with the Ly $\alpha$ forest effective field theory (EFT) framework and find that the one-loop EFT power spectrum yields unbiased measurements of the BAO shift parameters in radial and transverse direction for Ly $\alpha$ auto- and the Ly $\alpha$-quasar cross-correlation measurements. When using the one-loop EFT framework, we find that we can recover the BAO parameters without a shift, which has important implications for future Ly $\alpha$ forest analyses based on EFT. This work paves the way for novel full-shape analyses of the currently observing DESI and future surveys such as the PFS, WEAVE-QSO, and 4MOST.

Hadzhiyska, Boryana↗

DOE OSTI2022

Xyce(™) Parallel Electronic Simulator v.7.5

The Xyce Parallel Electronic Simulator simulates electronic circuit behavior in DC, AC, HB, MPDE and transient mode using standard analog (DAE) and/or device (PDE) device models including several age and radiation aware devices. It supports a variety of computing platforms (both serial and parallel) computers. Lastly, it uses a variety of modern solution algorithms dynamic parallel load-balancing and iterative solvers.! ! Xyce is primarily used to simulate the voltage and current behavior of a circuit network (a network of electronic devices connected via a conductive network). As a tool, it is mainly used for the design and analysis of electronic circuits.! ! Kirchoff's conservation laws are enforced over a network using modified nodal analysis. This results in a set of differential algebraic equations (DAEs). The resulting nonlinear problem is solved iteratively using a fully coupled Newton method, which in turn results in a linear system that is solved by either a standard sparse-direct solver or iteratively using Trilinos linear solver packages, also developed at Sandia National Laboratories.

Source record↗

DOE OSTI2022

Effect of magnetic geometry on the energy partition between ions and electrons in the scrape-off layer of magnetic fusion devices

A universal energy partition mechanism between ions and electrons has been confirmed to exist in the scrape-off layer of both the WEST tokamak and the W7-X stellarator. A peaked plasma density structure induced by an infinite magnetic connection length structure is observed to destroy this dependence and enhance the local ion and electron temperature ratio in the stellarator. Here, a theoretical analysis reveals that the ratio of ion and electron parallel heat conduction is predominant in determining this universality, while electrons would further be cooled in the density-peaked region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Lake Huron Enhances Snowfall Downwind of Lake Erie: A Modeling Study of the 2010 New Year’s Lake Effect Snowfall Event

In the Northeast and Great Lakes regions of the United States, the influence of multiple lakes on the overlying air can greatly affect lake-effect snowfall over downwind communities. To assess the impact of Lake Huron on snowfall downwind of Lake Erie, we simulated a lake-effect snow event which occurred from 1 to 6 January 2010 using the Regional Atmospheric Modeling System (RAMS). We found that the presence of Lake Huron enhances snowfall downwind of Lake Erie by almost 20% and leads to much heavier local snowfall totals than when Lake Huron is not present. This increase in snowfall is due to a lake-to-lake (L2L) convective band, as secondary circulations associated with lake-effect convection form over Lake Huron and persist overland between the lakes before reintensifying over Lake Erie. As these secondary circulations move over Lake Erie, lifting within the upward branch of the circulations accelerates the development of convection within the L2L band. Surface fluxes and convection over Lake Huron deepen the boundary layer, promoting deeper vertical development of this L2L band over Lake Erie. However, although this boundary layer modification strengthens the L2L band, we found that it actually reduced lake-effect snowfall produced by wind-parallel bands (WPB) in other parts of the lake. This indicates that boundary layer modification from upstream lakes may impact L2L bands differently than WPB which are not connected to upstream secondary circulations.

Lake effects↗

DOE OSTI2020

Broadband Characterization and Circuit Model Development of Transmission-Scale Transformers

This report describes broadband measurements of transmission-scale transformers typical in the electric power grid. This work was performed as part of the EMP Resilient Grid LDRD project at Sandia National Laboratories to generate circuit models that can be used for high-altitude electromagnetic pulse (HEMP) coupling simulations and response predictions. The objective of the work was to obtain characterization data of substation yard equipment across a frequency range relevant to HEMP. Vector network analyzer measurements up to 100 MHz were performed on two power transformers at ABB-Hitachi and a single ITEC potential transformer. Custom cable breakouts were designed to interface with the transformer terminals and provide ground connections to the chassis at the base of the transformer bushings. The three-phase terminals of the power transformers were measured as a common mode impedance using a parallel resistive splitter, and the single-phase terminals of the potential transformer were measured directly. A vector fitting algorithm was used to empirically fit circuit models to the resulting two-port networks and input impedances of the measured objects. Simplified circuit representations of the input impedances were also generated to assess the degree of precision needed for high-altitude electromagnetic pulse response predictions, which were performed in Sandia's XYCE circuit simulator platform. HEMP coupling simulations using the transformer models showed significant reduction in the voltage peak and broadening in the pulse width seen at the power transformer compared to the traveling wave voltage. This indicated the importance of the load condition when defining the coupled insult in an electric power substation. Simplified circuit models showed a similar voltage at the transformer with a smoothed waveform. The presence of potential transformers in the simulation did not significantly change the simulated voltage at the power transformer. Single-port input impedance models were also developed to define load conditions when transfer characteristics were not necessary.

24 POWER TRANSMISSION AND DISTRIBUTION↗