Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

ATS-6 spacecraft: In-flight antenna pattern measurement

Antenna patterns, principally associated with the 9.1 meter parabolic antenna of the ATS-6 spacecraft, were measured while in orbit at quasi-stationary synchronous altitude. Controlling the spacecraft attitude permitted a scanning of the spacecraft antenna pattern over the Rosman ground station, thus achieving the measurement of the antenna pattern contour. Patterns were determined in terms of relative gain referenced in position to the spacecraft body coordinates by means of signal power measurements made using a linear detector. These data were subsequently correlated with the attitude data to define the antenna patterns. Antenna patterns measured are presented and compared with available preflight patterns.

Nicholson, L. W.↗
NASA NTRS1991

Efficient packing of patterns in sparse distributed memory by selective weighting of input bits

When a set of patterns is stored in a distributed memory, any given storage location participates in the storage of many patterns. From the perspective of any one stored pattern, the other patterns act as noise, and such noise limits the memory's storage capacity. The more similar the retrieval cues for two patterns are, the more the patterns interfere with each other in memory, and the harder it is to separate them on retrieval. A method is described of weighting the retrieval cues to reduce such interference and thus to improve the separability of patterns that have similar cues.

Kanerva, Pentti↗
NASA NTRS1993

Antenna system providing a spherical radiation pattern

An antenna system provides a substantially spherical radiation pattern about a structure located above ground level, by locating the individual radiation pattern of each of a plurality of individual antennae, each positioned to have a radiation pattern covering only a portion of the desired sphere, and then applying all antenna signals, during either transmission or reception time intervals, through space-diversity and/or time-diversity apparatus, to cause the patterns of all of the antennae to combine into the desired substantially-spherical pattern. The antennae may have substantially hemispherical patterns, with each antenna of a pair thereof being directed in a direction generally opposite to the other antenna of that pair. Time domain multiple access (TDMA) operation of a master system station, with transmission in different time slots for different portions of the coverage sphere, and selection of the strongest received signal from among all of the plurality N of signals simultaneously received by the plurality N of antennae, can provide the desired spherical radiation pattern in both the transmission and reception modes of operation.

Sickles, II, Louis↗
NASA NTRS2006

Pattern-Recognition Processor Using Holographic Photopolymer

proposed joint-transform optical correlator (JTOC) would be capable of operating as a real-time pattern-recognition processor. The key correlation-filter reading/writing medium of this JTOC would be an updateable holographic photopolymer. The high-resolution, high-speed characteristics of this photopolymer would enable pattern-recognition processing to occur at a speed three orders of magnitude greater than that of state-of-the-art digital pattern-recognition processors. There are many potential applications in biometric personal identification (e.g., using images of fingerprints and faces) and nondestructive industrial inspection. In order to appreciate the advantages of the proposed JTOC, it is necessary to understand the principle of operation of a conventional JTOC. In a conventional JTOC (shown in the upper part of the figure), a collimated laser beam passes through two side-by-side spatial light modulators (SLMs). One SLM displays a real-time input image to be recognized. The other SLM displays a reference image from a digital memory. A Fourier-transform lens is placed at its focal distance from the SLM plane, and a charge-coupled device (CCD) image detector is placed at the back focal plane of the lens for use as a square-law recorder. Processing takes place in two stages. In the first stage, the CCD records the interference pattern between the Fourier transforms of the input and reference images, and the pattern is then digitized and saved in a buffer memory. In the second stage, the reference SLM is turned off and the interference pattern is fed back to the input SLM. The interference pattern thus becomes Fourier-transformed, yielding at the CCD an image representing the joint-transform correlation between the input and reference images. This image contains a sharp correlation peak when the input and reference images are matched. The drawbacks of a conventional JTOC are the following: The CCD has low spatial resolution and is not an ideal square-law detector for the purpose of holographic recording of interference fringes. A typical state-of-the-art CCD has a pixel-pitch limited resolution of about 100 lines/mm. In contrast, the holographic photopolymer to be used in the proposed JTOC offers a resolution > 2,000 lines/mm. In addition to being disadvantageous in itself, the low resolution of the CCD causes overlap of a DC term and the desired correlation term in the output image. This overlap severely limits the correlation signal-to-noise ratio. The two-stage nature of the process limits the achievable throughput rate. A further limit is imposed by the low frame rate (typical video rates) of low- and medium-cost commercial CCDs.

Chao, Tien-Hsin↗
NASA NTRS2006

Array-Pattern-Match Compiler for Opportunistic Data Analysis

A computer program has been written to facilitate real-time sifting of scientific data as they are acquired to find data patterns deemed to warrant further analysis. The patterns in question are of a type denoted array patterns, which are specified by nested parenthetical expressions. [One example of an array pattern is ((>3) 0 (not=1)): this pattern matches a vector of at least three elements, the first of which exceeds 3, the second of which is 0, and the third of which does not equal 1.] This program accepts a high-level description of a static array pattern and compiles a highly optimal and compact other program to determine whether any given instance of any data array matches that pattern. The compiler implemented by this program is independent of the target language, so that as new languages are used to write code that processes scientific data, they can easily be adapted to this compiler. This program runs on a variety of different computing platforms. It must be run in conjunction with any one of a number of Lisp compilers that are available commercially or as shareware.

James, Mark↗
NASA NTRS2018

On the Natural Structure of Amino Acid Patterns in Families of Protein Sequences

All known terrestrial proteins are coded as continuous strings of ≈20 amino acids. The patterns formed by the repetitions of elements in groups of finite sequences describes the natural architectures of protein families. We present a method to search for patterns and groupings of patterns in protein sequences using a mathematically precise definition for “repetition”, an efficient algorithmic implementation and a robust scoring system with no adjustable parameters. We show that the sequence patterns can be well-separated into disjoint classes according to their recurrence in nested structures. The statistics of the occurrences of patterns indicate that short repetitions are sufficient to account for the differences between natural families and randomized groups of sequences by more than 10 standard deviations, while contiguous sequence patterns shorter than 5 residues are effectively random in their occurrences. A small subset of patterns is sufficient to account for a robust ”familiarity” definition between arbitrary sets of sequences.

Pablo Turjanski↗
DOE OSTI2022

Probabilistic Modeling of Commercial Building Occupancy Patterns Using Location-Based Map Data: Preprint

Considering occupancy patterns is crucial to simulate buildings' energy use. Current energy models use inputs that simplify the actual diversity in occupancy into static occupancy patterns and are not able to represent the numerous variations in occupancy patterns between buildings and across different locations. Recently, inferring occupancy schedules from metered electricity consumption data was used to model occupancy in commercial buildings. However, the translation from metered data to occupancy schedules requires many assumptions that might not capture the reality, and the process is hindered by the availability of data from advanced metering infrastructure. With the development of information technologies, occupancy modeling should not be limited to traditional approaches. The prevalence of social networks and location services with real-time user feedback provides publicly accessible data via Maps Application Programming Interfaces (APIs) such as Google Maps, SafeGraph, Mapbox, Foursquare, etc. This paper presents an automated framework for modeling parametric occupancy patterns using such APIs to calibrate commercial district buildings' energy models. This process includes three main steps: data extraction and processing, parametric schedules generation, and schedules integration. We demonstrated this framework in districts where we used maps API to generate more accurate behavioral patterns for operations and electric vehicle charging events. We used these patterns to determine differences in energy use across key sociodemographic and spatial parameters. The presented method has the potential for worldwide applications. Users can utilize this framework to extract data for selected locations of interest to create more realistic behavioral patterns for commercial facilities across different districts.

building energy modeling↗
DOE OSTI2019

Effect of Fragile Speckle Patterns on Accuracy of Digital Volume Correlation

Due to challenges in generating high-quality 3D speckle patterns for Digital Volume Correlation (DVC) strain measurements, DVC experiments often utilize the intrinsic texture and contrast of composite microstructures. One common deficiency of these natural speckle patterns is their poor durability under large deformations, which can lead to decorrelation and inaccurate strain measurements. Using syntactic foams as a model material, the effects of speckle pattern degradation on the accuracy of DVC displacement and strain measurements are assessed with both experimentally-acquired and numerically-generated images. It is shown that measurement error can be classified into two regimes as a function of the percentage of markers that have disappeared from the speckle pattern. For minor levels of damage beneath a critical level of damage, displacement and strain error remained near the noise floor of less than 0.05 voxels and 100 με, respectively; above this level, error rapidly increased to unacceptable levels above 0.2 voxels and 10,000 με. This transition occurred after 30%–40% of the speckles disappeared, depending on characteristics of the speckle pattern and its degradation mechanisms. Furthermore, these results suggest that accurate DVC measurements can be obtained in many types of fragile materials despite severe damage to the speckle pattern.

42 ENGINEERING↗
DOE OSTI2022

Computing diffraction patterns of microstructures from phase-field simulations

The diffraction pattern of a material contains information not only on the crystal structures of its constituting phases, but also on its mesoscale spatial distributions of phases, grains, and ferroelastic, ferroelectric, and ferromagnetic domains. While diffraction patterns from experiments such as X-ray diffraction are presented in the reciprocal or Fourier space, mesoscale microstructure models such as the phase-field method naturally produce real-space images of spatial distribution of chemical composition, structural, and ferroic domains. Although one could rather readily compute the Fourier amplitudes of chemical and structural domain distributions generated by mesoscale simulations, they only contain information about the length scale and alignment of the real-space chemical and structure domains. Therefore, a direct comparison between diffraction experiments and mesoscale microstructure simulations is not possible. Here, we develop a theoretical approach to directly compute the crystal diffraction patterns of microstructures predicted by phase-field simulations. In particular, we consider five representative examples of microstructure patterns involving purely compositional domains, a single pair of tetragonal twin structures, multiple twin variants in a hexagonal system, ferroelectric polar vortices, and polycrystalline grains. The results are compared with previous experimental observations as well as X-ray diffraction experiments performed in the present study. Furthermore, the theoretical framework allows one to directly connect material microstructures and diffraction patterns predicted from phase-field simulations and the corresponding diffraction patterns from experiments, and thus providing guidance to experimental diffraction characterization and interpretation of microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-dimensional patterning of mesoscale fibers using acoustophoresis

The performance of functional composites can rely critically on the arrangement of secondary phases; for example, patterned networks of conductive particles can impart anisotropic thermal, electric or ionic conductivity while preserving flexibility in the matrix. We demonstrate the use of standing acoustic waves to generate periodic patterns of short fibers. We extend the range of possible patterns with the first demonstration of both rectangular grids and arrays of octagons interspersed with rectangles. These newly demonstrated patterns are rationalized using theoretical models of acoustic forces and torques on fibers that account for two-dimensional spatial variations arising from applied acoustic fields. The models enable simulations of fiber motion, which are used to (i) map out final fiber positions as a function of initial position and orientation, and (ii) corroborate experiments visualizing fiber motion and final patterns. This approach provides a fast and accurate way to predict emergent fiber patterns as a function of excitation modality and fiber length. The theory and experiments clearly indicate strong coupling between the length of the fibers and the spacing of the acoustic nodes. Furthermore, this coupling is used to estimate reductions in percolation thresholds associated with the ratio of fiber length and acoustic wavelength.

25 ENERGY STORAGE↗
DOE OSTI2021

Revealing the Three-Dimensional Orientation and Interplay between Plasmons and Interband Transitions for Single Gold Bipyramids by Photoluminescence Excitation Pattern Imaging

Gold bipyramids (AuBPs) attract significant attention due to the large enhancement of the electric field around their sharp tips and well-defined tunability of their plasmon resonances. Excitation patterns of single AuBPs are recorded using raster-scanning confocal microscopy combined with radially and azimuthally polarized laser beams. Photoluminescence spectra (PL) and excitation patterns of the same AuBP are acquired with three different excitation wavelengths. Here, the isotropic excitation patterns suggest that the AuBPs are mainly excited by interband transitions with 488/530 nm radiation, while excitation patterns created with a 633 nm laser exhibit a double lobed shape that indicates a single dipole excitation process associated with the longitudinal plasmon resonance mode. We are able to determine the three-dimensional orientation of single AuBPs nonperturbatively by comparing experimental patterns with theoretical simulations. The asymmetric patterns show that the AuBPs are lying on the substrate with an out-of-plane tilt angle of around 10° to 15°.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Two-Step Patterning of Scalable All-Inorganic Halide Perovskite Arrays

Halide perovskites have many important optoelectronic properties, including high emission efficiency, high absorption coefficients, color purity, and tunable emission wavelength, which makes these materials promising for optoelectronic applications. However, the inability to precisely control large-scale patterned growth of halide perovskites limits their potential toward various device applications. Here, we report a patterning method for the growth of a cesium lead halide perovskite single crystal array. Our approach consists of two steps: (1) cesium halide salt arrays patterning and (2) chemical vapor transport process to convert salt arrays into single crystal perovskite arrays. Characterizations including energy-dispersive X-ray spectroscopy and photoluminescence have been employed to confirm the chemical compositions and the optical properties of the as-synthesized perovskite arrays. This patterning method enables the patterning of single crystal cesium lead halide perovskite arrays with tunable spacing (from 2 to 20 μm) and crystal size (from 200 nm to 1.2 μm) in high production yield (almost every pixel in the array is successfully grown with converted perovskite crystals). Furthermore, our large-scale patterning method renders a platform for the study of fundamental properties and opportunities for perovskite-based optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Describing patterns of familial cancer risk in subfertile men using population pedigree data

STUDY QUESTION Can we simultaneously assess risk for multiple cancers to identify familial multicancer patterns in families of azoospermic and severely oligozoospermic men? SUMMARY ANSWER Here, distinct familial cancer patterns were observed in the azoospermia and severe oligozoospermia cohorts, suggesting heterogeneity in familial cancer risk by both type of subfertility and within subfertility type. WHAT IS KNOWN ALREADY Subfertile men and their relatives show increased risk for certain cancers including testicular, thyroid, and pediatric. STUDY DESIGN, SIZE, DURATION A retrospective cohort of subfertile men (N = 786) was identified and matched to fertile population controls (N = 5674). Family members out to third-degree relatives were identified for both subfertile men and fertile population controls (N = 337 754). The study period was 1966–2017. Individuals were censored at death or loss to follow-up, loss to follow-up occurred if they left Utah during the study period. PARTICIPANTS/MATERIALS, SETTING, METHODS Azoospermic (0 × 10 6 /mL) and severely oligozoospermic (<1.5 × 10 6 /mL) men were identified in the Subfertility Health and Assisted Reproduction and the Environment cohort (SHARE). Subfertile men were age- and sex-matched 5:1 to fertile population controls and family members out to third-degree relatives were identified using the Utah Population Database (UPDB). Cancer diagnoses were identified through the Utah Cancer Registry. Families containing ≥10 members with ≥1 year of follow-up 1966–2017 were included (azoospermic: N = 426 families, 21 361 individuals; oligozoospermic: N = 360 families, 18 818 individuals). Unsupervised clustering based on standardized incidence ratios for 34 cancer phenotypes in the families was used to identify familial multicancer patterns; azoospermia and severe oligospermia families were assessed separately. MAIN RESULTS AND THE ROLE OF CHANCE Compared to control families, significant increases in cancer risks were observed in the azoospermia cohort for five cancer types: bone and joint cancers hazard ratio (HR) = 2.56 (95% CI = 1.48–4.42), soft tissue cancers HR = 1.56 (95% CI = 1.01–2.39), uterine cancers HR = 1.27 (95% CI = 1.03–1.56), Hodgkin lymphomas HR = 1.60 (95% CI = 1.07–2.39), and thyroid cancer HR = 1.54 (95% CI = 1.21–1.97). Among severe oligozoospermia families, increased risk was seen for three cancer types: colon cancer HR = 1.16 (95% CI = 1.01–1.32), bone and joint cancers HR = 2.43 (95% CI = 1.30–4.54), and testis cancer HR = 2.34 (95% CI = 1.60–3.42) along with a significant decrease in esophageal cancer risk HR = 0.39 (95% CI = 0.16–0.97). Thirteen clusters of familial multicancer patterns were identified in families of azoospermic men, 66% of families in the azoospermia cohort showed population-level cancer risks, however, the remaining 12 clusters showed elevated risk for 2-7 cancer types. Several of the clusters with elevated cancer risks also showed increased odds of cancer diagnoses at young ages with six clusters showing increased odds of adolescent and young adult (AYA) diagnosis [odds ratio (OR) = 1.96–2.88] and two clusters showing increased odds of pediatric cancer diagnosis (OR = 3.64–12.63). Within the severe oligozoospermia cohort, 12 distinct familial multicancer clusters were identified. All 12 clusters showed elevated risk for 1–3 cancer types. An increase in odds of cancer diagnoses at young ages was also seen in five of the severe oligozoospermia familial multicancer clusters, three clusters showed increased odds of AYA diagnosis (OR = 2.19–2.78) with an additional two clusters showing increased odds of a pediatric diagnosis (OR = 3.84–9.32). LIMITATIONS, REASONS FOR CAUTION Although this study has many strengths, including population data for family structure, cancer diagnoses and subfertility, there are limitations. First, semen measures are not available for the sample of fertile men. Second, there is no information on medical comorbidities or lifestyle risk factors such as smoking status, BMI, or environmental exposures. Third, all of the subfertile men included in this study were seen at a fertility clinic for evaluation. These men were therefore a subset of the overall population experiencing fertility problems and likely represent those with the socioeconomic means for evaluation by a physician. WIDER IMPLICATIONS OF THE FINDINGS This analysis leveraged unique population-level data resources, SHARE and the UPDB, to describe novel multicancer clusters among the families of azoospermic and severely oligozoospermic men. Distinct overall multicancer risk and familial multicancer patterns were observed in the azoospermia and severe oligozoospermia cohorts, suggesting heterogeneity in cancer risk by type of subfertility and within subfertility type. Describing families with similar cancer risk patterns provides a new avenue to increase homogeneity for focused gene discovery and environmental risk factor studies. Such discoveries will lead to more accurate risk predictions and improved counseling for patients and their families. STUDY FUNDING/COMPETING INTEREST(S) This work was funded by GEMS: Genomic approach to connecting Elevated germline Mutation rates with male infertility and Somatic health (Eunice Kennedy Shriver National Institute of Child Health and Human Development (NICHD): R01 HD106112). The authors have no conflicts of interest relevant to this work.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2015

Safety Case Patterns: Theory and Applications

We develop the foundations for a theory of patterns of safety case argument structures, clarifying the concepts involved in pattern specification, including choices, labeling, and well-founded recursion. We specify six new patterns in addition to those existing in the literature. We give a generic way to specify the data required to instantiate patterns and a generic algorithm for their instantiation. This generalizes earlier work on generating argument fragments from requirements tables. We describe an implementation of these concepts in AdvoCATE, the Assurance Case Automation Toolset, showing how patterns are defined and can be instantiated. In particular, we describe how our extended notion of patterns can be specified, how they can be instantiated in an interactive manner, and, finally, how they can be automatically instantiated using our algorithm.

Safety Assurance↗
DOE OSTI2018

Reversible Surface Patterning by Dynamic Crosslink Gradients: Controlling Buckling in 2D

Abstract Harnessing the self‐organization of soft materials to make complex, well‐ordered surface patterns in a noninvasive manner is challenging. The wrinkling of thin films provides a compelling strategy to achieve this. Despite much attention, however, a simple, single‐step, reversible method that gives rise to controlled, two‐dimensional (2D) ordered, continuous, and discontinuous patterns has proven to be elusive. Here a novel, robust method is described to achieve this using an ultraviolet‐light‐sensitive anthracene‐containing polymer thin film. The origin of the patterns is the local buckling of the thin film, where the control over the topology is given by laterally patterning out‐of‐plane gradients in the crosslink density of the film. The underlying buckling mechanics and formation of the surface features are well‐described by finite element analysis. By illuminating the film with a photomask, local and long‐range patterns that can be both continuous and discontinuous are able to be written. Furthermore, the patterning is fully reversible over multiple cycles. The results demonstrate a simple strategy for erasable storage of information in a surface topography that has applications in memory, anticounterfeiting, and plasmonics.

Hou, Honghao↗
DOE OSTI2019

Scanning Probe Lithography Patterning of Monolayer Semiconductors and Application in Quantifying Edge Recombination

Scanning probe lithography is used to directly pattern monolayer transition metal dichalcogenides (TMDs) without the use of a sacrificial resist. Here, using an atomic-force microscope, a negatively biased tip is brought close to the TMD surface. By inducing a water bridge between the tip and the TMD surface, controllable oxidation is achieved at the sub-100 nm resolution. The oxidized flake is then submerged into water for selective oxide removal which leads to controllable patterning. In addition, by changing the oxidation time, thickness tunable patterning of multilayer TMDs is demonstrated. This resist-less process results in exposed edges, overcoming a barrier in traditional resist-based lithography and dry etch where polymeric byproduct layers are often formed at the edges. By patterning monolayers into geometric patterns of different dimensions and measuring the effective carrier lifetime, the non-radiative recombination velocity due to edge defects is extracted. Using this patterning technique, it is shown that selenide TMDs exhibit lower edge recombination velocity as compared to sulfide TMDs. The utility of scanning probe lithography towards understanding material-dependent edge recombination losses without significantly normalizing edge behaviors due to heavy defect generation, while allowing for eventual exploration of edge passivation schemes is highlighted, which is of profound interest for nanoscale electronics and optoelectronics.

2D materials↗
DOE OSTI2024

Design patterns of biological cells

Design patterns are generalized solutions to frequently recurring problems. They were initially developed by architects and computer scientists to create a higher level of abstraction for their designs. Here, we extend these concepts to cell biology to lend a new perspective on the evolved designs of cells' underlying reaction networks. We present a catalog of 21 design patterns divided into three categories: creational patterns describe processes that build the cell, structural patterns describe the layouts of reaction networks, and behavioral patterns describe reaction network function. Applying this pattern language to the E. coli central metabolic reaction network, the yeast pheromone response signaling network, and other examples lends new insights into these systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Guided Lithium Deposition by Surface Micro-Patterning of Lithium-Metal Electrodes

Uncontrolled lithium (Li) deposition has hampered the evolution of Li metal electrode-based Li batteries. In this work, we report the differences of a guided Li deposition with a size change of the square hole micro-patterns carved on the Li metal surface with two different dimensions using a simple stamping method. Li deposition is preferentially initiated on the top edge for the smaller pattern and on the bottom for the larger pattern. Although the two patterns lead to a more uniform utilization of the Li, the larger pattern shows a higher cycling stability with a LiFePO4/Li cell than that of the smaller one indicating that initiating the Li deposition from the bottom of the hole is more efficient in confining the deposited Li. Based on the impedance analysis of the compressed Li electrodes, we suggest that the guided Li deposition on the bottom of the hole is attributed to a large contrast in the resistance of native surface passivation layer between the top and hole surfaces. This improved understanding can further advance guided Li deposition induced by surface patterns for high performance Li metal batteries.

Kim, Yun-Jung↗