Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

STEM Ptychographic Holography of Electric and Magnetic Potentials

The development of fast an efficient direct electron imaging detectors have enabled the advancement of phase-imaging techniques in STEM such as iterative ptychography. As beneficial as these techniques are to imaging phase objects, the information recorded in the raw data is due to phase gradients across the probe, so it can be challenging to reconstruct slowly varying phase at lower spatial frequencies such as those induced by electric or magnetic potentials within the specimen. STEM holography [1,2] is an interferometric 4D-STEM technique where electrons in the beam are coherently divided into a superposition of two or more spatially separated probes which are then scanned over the specimen. For example, in a two-beam superposition, the two probes form overlapping bright field discs at the detector which then interfere (left of Fig. 1). Furthermore, if one probe passes through vacuum while the other transmits through the specimen, the resulting relative phase shift can be measured by recording shifts in the interference pattern. STEM holography is thus directly sensitive to the phase of the probe relative to the reference beam, and this phase can be measured regardless of the convergence angle of the probe, unlike single beam ptychography.

Biological Sciences↗
DOE OSTI2021

Space-time crystalline order of a high-critical-temperature superconductor with intrinsic Josephson junctions

Abstract We theoretically demonstrate that the high-critical-temperature (high- T c ) superconductor Bi 2 Sr 2 CaCu 2 O 8+ x (BSCCO) is a natural candidate for the recently envisioned classical space-time crystal. BSCCO intrinsically forms a stack of Josephson junctions. Under a periodic parametric modulation of the Josephson critical current density, the Josephson currents develop coupled space-time crystalline order, breaking the continuous translational symmetry in both space and time. The modulation frequency and amplitude span a (nonequilibrium) phase diagram for a so-defined spatiotemporal order parameter, which displays rigid pattern formation within a particular region of the phase diagram. Based on our calculations using representative material properties, we propose a laser-modulation experiment to realize the predicted space-time crystalline behavior. Our findings bring new insight into the nature of space-time crystals and, more generally, into nonequilibrium driven condensed matter systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Modified microstructures in proton irradiated dual phase 308L weldment filler material

In this study, the effect of proton irradiation on the microstructure of δ ferrite—γ austenite mixed phase 308L filler material in a 508–304 dissimilar metal weldment was investigated over a depth of 0 to 10 µm. Ni–Si–Mn G-phase precipitates were observed with SEM and TEM in δ ferrite but not in γ austenite. Our density functional theory based calculations show that the G/Fe interface energy in δ-Fe is significantly lower than that in γ-Fe (0.35 versus 1.25 J/m 2 ), which provides a thermodynamics-based explanation for our experimental observations of preferential formation of G-phase in δ ferrite. STEM-EDS, TEM dark field imaging, and diffraction patterns confirmed the Ni–Si–Mn enriched precipitates were G-phase precipitates with a stoichiometry of Mn 6 Ni 16 Si 7 . Intragranular voids and Ni–Si enriched clusters were observed in irradiated γ austenite. Additionally, Ni and Si segregation was observed along the void interfaces. In both cases, Ni–Si clusters and segregation to voids, selected area diffraction patterns did not reveal the existence of a second phase. Proton irradiation induced Cr depletion and Si and Ni enrichment at γ-γ austenite grain boundaries that was characterized with STEM/EDS.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Collective effects and pattern formation for directional locking of disks moving through obstacle arrays

We examine directional locking effects in an assembly of disks driven through a square array of obstacles as the angle of drive rotates from 0° to 90°. For increasing disk densities, the system exhibits a series of different dynamic patterns along certain locking directions, including one-dimensional or multiple-row chain phases and density-modulated phases. For nonlocking driving directions, the disks form disordered patterns or clusters. Here, when the obstacles are small or far apart, a large number of locking phases appear; however, as the number of disks increases, the number of possible locking phases drops due to the increasing frequency of collisions between the disks and obstacles. For dense arrays or large obstacles, we find an increased clogging effect in which immobile and moving disks coexist.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices.

Wang, Xiaowei↗
DOE OSTI2021

The effect of entrance flow development on vortex formation and wall shear stress in a curved artery model

In this work, we numerically investigate the effect of entrance condition on the spatial and temporal evolution of multiple three-dimensional vortex pairs and the wall shear stress distribution in a curved artery model. We perform this study using a Newtonian blood-analog fluid subjected to a pulsatile flow with two inflow conditions. The first flow condition is fully developed while the second condition is undeveloped (i.e., uniform). We discuss the connection along the axial direction between regions of organized vorticity observed at various cross sections of the model and compare results between the different entrance conditions. We model a human artery with a simple, rigid 180° curved pipe with a circular cross section and constant curvature, neglecting the effects of taper, torsion, and elasticity. Numerical results are computed from a discontinuous high-order spectral element flow solver. The flow rate used in this study is physiological. We observe differences in secondary flow patterns, especially during the deceleration phase of the physiological waveform where multiple vortical structures of both Dean-type and Lyne-type coexist. The results indicate that decreased axial velocities under an undeveloped condition produce smaller secondary flows that ultimately inhibit growth of any interior flow vortices. We highlight the effect of the entrance condition on the formation of these structures and subsequent appearance of abnormal inner wall shear stresses, which suggest there may be a lower prevalence of cardiovascular disease in curved arteries where the flow is rather undeveloped—a potentially physiologically significant result to help understand the influence of blood flow development on disease.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Phase and contrast moiré signatures in two-dimensional cone beam interferometry

Neutron interferometry has played a distinctive role in fundamental science and characterization of materials. Moiré neutron interferometers are candidate next-generation instruments: they offer microscopy-like magnification of the signal, enabling direct camera recording of interference patterns across the full neutron wavelength spectrum. Here we demonstrate the extension of phase-grating moiré interferometry to two-dimensional geometries. Our fork-dislocation phase gratings reveal phase singularities in the moiré pattern, and we explore orthogonal moiré patterns with two-dimensional phase gratings. Our measurements of phase topologies and gravitationally induced phase shifts are in good agreement with theory. These techniques can be implemented in existing neutron instruments to advance interferometric analyses of emerging materials and precision measurements of fundamental constants. Published by the American Physical Society 2024

Sarenac, D. (ORCID:0000000185753367)↗
DOE OSTI2024

Predicting ptychography probe positions using single-shot phase retrieval neural network

Ptychography is a powerful imaging technique that is used in a variety of fields, including materials science, biology, and nanotechnology. However, the accuracy of the reconstructed ptychography image is highly dependent on the accuracy of the recorded probe positions which often contain errors. These errors are typically corrected jointly with phase retrieval through numerical optimization approaches. When the error accumulates along the scan path or when the error magnitude is large, these approaches may not converge with satisfactory result. We propose a fundamentally new approach for ptychography probe position prediction for data with large position errors, where a neural network is used to make single-shot phase retrieval on individual diffraction patterns, yielding the object image at each scan point. The pairwise offsets among these images are then found using a robust image registration method, and the results are combined to yield the complete scan path by constructing and solving a linear equation. We show that our method can achieve good position prediction accuracy for data with large and accumulating errors on the order of 10 2 pixels, a magnitude that often makes optimization-based algorithms fail to converge. For ptychography instruments without sophisticated position control equipment such as interferometers, our method is of significant practical potential.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

In-silico quantification of intersubject variability on aerosol deposition in the oral airway

The extrathoracic oral airway I s not only a major mechanical barrier for pharmaceutical aerosols to reach the lung but also a major source of variability in lung deposition. Using computational fluid dynamics, deposition of 1-30 µm particles was predicted in 11 CT-based models of the oral airways of adults (7 healthy subjects and 4 patients with chronic obstructive pulmonary disease). Simulations were performed for mouth breathing during both inspiration and expiration at two steady-state flow rates representative of resting/light activity (18 L/min) and of that typically used during aerosol inhalation from a dry powder inhaler (45 L/min). For each subject, oral deposition increased with increasing particle size and flow rate. When averaged over all subjects, there was no significant difference in oral deposition efficiency between inspiration and expiration, unlike subregional deposition that show significantly different patterns between the two breathing phases. Consistent with previous in-vitro inspiratory studies, our data showed a large intersubject variability in oral deposition. These results highlight the need for incorporating morphological variation of the upper airway in predictive models of aerosol deposition for accurate predictions of particle dosimetry in the intrathoracic region of the lung.

Computational fluid dynamics (CFD), Inertial impac↗
DOE OSTI2020

Radius-to-frequency Mapping and FRB Frequency Drifts

We build a model of radius-to-frequency mapping in magnetospheres of neutron stars and apply it to frequency drifts observed in fast radio bursts (FRBs). We assume that an emission patch propagates along the dipolar magnetic field lines, producing coherent emission with frequency, direction, and polarization defined by the local magnetic field. The observed temporal evolution of the frequency depends on the relativistic effects of time contraction and the curvature of the magnetic field lines. The model generically produces linear scaling of the drift rate, $\dot{\omega}$ ∝-${\omega}$, matching both numerically and parametrically the rates observed in FBRs; a more complicated behavior of $\dot{\omega}$ is also possible. Fast rotating magnetospheres produce higher drifts rates for similar viewing parameters than the slowly rotating ones. In the case of repeaters, the same source may show variable drift patterns depending on the observing phase. We expect rotational of polarization position angle through a burst, though by smaller amount than in radio pulsars. All of these findings compare favorably with properties of FBRs, strengthening their possible loci in the magnetospheres of neutron stars.

Magnetars↗
DOE OSTI2025

Novel Synthesis and Characterization of Uranium-Zirconium Carbonitride by Direct Casting

UZrCN has exhibited thermophysical properties beneficial to high temperature reactor applications such as nuclear thermal rockets. The present work investigates a novel liquid phase synthesis method involving the admission of nitrogen gas during arc melting of uranium, zirconium, and carbon. Initial microstructural examinations using SEM indicated that the samples remain heterogenous with zirconium-rich cores in a uranium-rich matrix. Heterogeneity resulted from large differences in melting temperature of the major constituents and rapid solidification. Additional EDS, combustion analysis, and inert gas fusion analysis proved that the core regions have both uranium and zirconium and establish that carbon and nitrogen are retained during the fabrication process. XRD clarifies that the light elements did not form compounds with the uranium matrix but rather incorporated into the core region forming a sub-stoichiometric UZrCN. Heat treatment performed on equimolar U-Zr-C resulted in an increase in the homogenous phase present with an XRD pattern reflecting a ternary UZrCN despite small amounts of segregation in the final button.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

On Uranium-Zirconium Carbonitride Formation by Direct Casting - A Novel Synthesis Study

UZrCN has exhibited thermophysical properties beneficial to high temperature reactor applications such as nuclear thermal rockets. The present work investigates a novel liquid phase synthesis method involving the admission of nitrogen gas during arc melting of uranium, zirconium, and carbon. Initial microstructural examinations using SEM indicated that the samples remain heterogenous with zirconium-rich cores in a uranium-rich matrix. Heterogeneity resulted from large differences in melting temperature of the major constituents and rapid solidification. Additional EDS, combustion analysis, and inert gas fusion analysis proved that the core regions have both uranium and zirconium and establish that carbon and nitrogen are retained during the fabrication process. XRD clarifies that the light elements did not form compounds with the uranium matrix but rather incorporated into the core region forming a sub-stoichiometric UZrCN. Heat treatment performed on equimolar U-Zr-C resulted in an increase in the homogenous phase present with an XRD pattern reflecting a ternary UZrCN despite small amounts of segregation in the final button.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Self-consistent dispersal puts tight constraints on the spatiotemporal organization of species-rich metacommunities

Dispersal can be critical to the maintenance of ecosystems as it allows local communities to be recolonized after extinction. However, it remains unclear whether the extinction-mitigating effect of dispersal persists when the number of competing species is large. Based on a spatially explicit mathematical description of metacommunities, we show that when many species coexist, each species operates near its extinction threshold, barely surviving due to dispersal. This has general consequences for spatiotemporal abundance patterns. For short-range dispersal, species organize into fractal spatiotemporal extinction patterns characteristic of a directed percolation phase transition. As species approach their extinction threshold, biodiversity is very sensitive to perturbation, suggesting that dispersal within a metacommunity puts tight constraints on the robustness and evolution of species-rich metacommunities. Biodiversity is often attributed to a dynamic equilibrium between the immigration and extinction of species. This equilibrium forms a common basis for studying ecosystem assembly from a static reservoir of migrants—the mainland. Yet, natural ecosystems often consist of many coupled communities (i.e., metacommunities), and migration occurs between these communities. The pool of migrants then depends on what is sustained in the ecosystem, which, in turn, depends on the dynamic migrant pool. This chicken-and-egg problem of survival and dispersal is poorly understood in communities of many competing species, except for the neutral case—the “unified neutral theory of biodiversity.” Employing spatiotemporal simulations and mean-field analyses, we show that self-consistent dispersal puts rather tight constraints on the dynamic migration–extinction equilibrium. When the number of species is large, species are pushed to the edge of their global extinction, even when competition is weak. As a consequence, the overall diversity is highly sensitive to perturbations in demographic parameters, including growth and dispersal rates. When dispersal is short range, the resulting spatiotemporal abundance patterns follow broad scale-free distributions that correspond to a directed percolation phase transition. The qualitative agreement of our results for short-range and long-range dispersal suggests that this self-organization process is a general property of species-rich metacommunities. Our study shows that self-sustaining metacommunities are highly sensitive to environmental change and provides insights into how biodiversity can be rescued and maintained.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Synthesis of Quantum-Confined Borophene Nanoribbons

Here, borophene nanoribbons (BNRs) are one-dimensional strips of atomically thin boron expected to exhibit quantum-confined electronic properties that are not present in extended two-dimensional borophene. While the parent material borophene has been experimentally shown to possess anisotropic metallicity and diverse polymorphic structures, the atomically precise synthesis of nanometer-wide BNRs has not yet been achieved. Here, we demonstrate the synthesis of multiple BNR polymorphs with well-defined edge configurations within the nanometer-scale terraces of vicinal Ag(977). Through atomic-scale imaging, spectroscopy, and first-principles calculations, the synthesized BNR polymorphs are characterized and found to possess distinct edge structures and electronic properties. For single-phase BNRs, v 1/6 -BNRs and v 1/5 -BNRs adopt reconstructed armchair edges and sawtooth edges, respectively. In addition, the electronic properties of single-phase v 1/6 -BNRs and v 1/5 -BNRs are dominated by Friedel oscillations and striped moiré patterns, respectively. On the other hand, mixed-phase BNRs possess quantum-confined states with increasing nodes in the electronic density of states at elevated biases. Overall, the high degree of polymorphism and diverse edge topologies in borophene nanoribbons provide a rich quantum platform for studying one-dimensional electronic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Segmented Microfluidic Flow Reactors for Nanomaterial Synthesis

Microfluidic reactors have remarkably promoted the synthesis and investigation of advanced nanomaterials due to their continuous mode and accelerated heat/mass transfer. Notably, segmented microfluidic flow reactors (SMFRs) are an important class of microfluidic reactors that have been developed to accurately manipulate nanomaterial synthesis by further improvement of the residence time distributions and unique flow behaviors. This review provided a survey of the nanomaterial synthesis in SMFRs for the aspects of fluid dynamics, flow patterns, and mass transfer among and within distinct phases and provided examples of the synthesis of versatile nanomaterials via the use of different flow patterns.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Canister Centerline Cooling Experiments for DPF5-336 Reference Material Made with ERV3b Salt Simulant

This report provides experimental details and results on the elemental distributions (compositions), crystalline/amorphous phase distribution, and microstructures for DPF5-336 reference materials made with ERV3b salt that were subjected to the canister centerline cooling (CCC) heat treatment process. To fabricate these materials, ammonium dihydrogen phosphate was mixed with ERV3b salt simulant and a dechlorination procedure was run in the generation-2 dechlorinator at the Pacific Northwest National Laboratory up to 600°C in an alumina crucible. After the dechlorination process, the product was removed from the crucible, lightly crushed, loaded into a new alumina crucible, Fe 2 O 3 was added, and this was vitrified at 1100°C for 1 hour and quenched. The quenched material was mostly amorphous but showed some small diffraction peaks attributed to Li 3 Fe 2 (PO 4 ) 3 . This quenched material was ground to a fine particle size in a milling chamber, and this was subjected to the CCC cooling profile in duplicate within alumina and fused quartz crucibles. The CCC experiment is designed to simulate the slowest cooling profile (the vertical centerline) of a 0.61-m diameter canister where the slower cooling profile often results in the production of a variety of different crystalline phases upon formation of which result in a residual glass of unknown composition and properties. The information gleaned from these types of experiments will lead to improved composition-property predictions for materials with similar compositions. The results of the alumina and fused quartz experiments show different microstructures but similar diffraction patterns providing evidence of similar crystalline phases being present in each sample. Both samples had monazite [i.e., (Ce,Nd)PO 4 ] and mixtures of phases containing P, Fe, and alkali metal elements. This report completes the milestone M4FT-23PN030104042 with details provided in Appendix B.

36 MATERIALS SCIENCE↗
DOE OSTI2021

PhaseGAN: a deep-learning phase-retrieval approach for unpaired datasets

Phase retrieval approaches based on deep learning (DL) provide a framework to obtain phase information from an intensity hologram or diffraction pattern in a robust manner and in real-time. However, current DL architectures applied to the phase problem rely on i) paired datasets, i. e., they arc only applicable when a satisfactory solution of the phase problem has been found, and ii) the fact that most of them ignore the physics of the imaging process. Here, we present PhaseGAN, a new DL approach based on Generative Adversarial Networks, which allows the use of unpaired datasets and includes the physics of image formation. The performance of our approach is enhanced by including the image formation physics and a novel Fourier loss function, providing phase reconstructions when conventional phase retrieval algorithms fail, such as ultra-fast experiments. Thus, PhaseGAN offers the opportunity to address the phase problem in real-time when no phase reconstructions but good simulations or data from other experiments are available.

47 OTHER INSTRUMENTATION↗