Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarization of light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Thermal dependence of stress-induced birefringence in single mode optical fibers

Measurements of the change in stress-induced birefringence with temperature in single mode optical fibers are reported. The fibers examined include those with low residual stress birefringence that have circular and elliptical cores. A section of each fiber was placed under constant load with weights and heated inside a furnace. Polarized light was coupled into and out of the fiber ends outside the furnace. Two mutually perpendicular polarization components were analyzed and detected at the fiber output end. Changes in the detected signal levels were monitored as a function of the temperature of the single mode fiber stressed under constant load. Discussion of results and applications to localized stress measurements at high temperatures are presented.

Berthold, J. W., III↗
NASA NTRS1973

Glancing incidence telescopes for space astronomy

A technique for determining the state of polarization of a light source by evaluating its image at the focus of a glancing telescope is reported. An analysis of the central disc of the diffraction image reveals if the light source is polarized, the plane of polarization, and the degree of polarization. When polarized light is incident at the aperture of a diffraction limited glancing telescope, the central disc of the diffraction pattern takes on an elliptical configuration. This ellipticity is caused by the tendency of the electric vector component in the plane of incidence to be absorbed by the reflecting material. As the state of polarization goes from plane polarized to decreasing degrees of elliptically polarized light, the ellipticity of the central disc goes from a maximum at plane polarization to zero at circular polarization. These curves give a direct relationship between the degree of polarization of a light source and the ellipticity of the central disc for this particular telescope, independent of the light source wavelength.

Alonso, J., Jr.↗
NASA NTRS1978

Polarized vacuum ultraviolet and X-radiation

The most intense source of polarized vacuum UV and X radiation is synchrotron radiation, which exhibits a degree of partially polarized light between about 80-100%. However, the radiation transmitted by vacuum UV monochromators can also be highly polarized. The Seya-Namioka type of monochromator can produce partially polarized radiation between 50-80%. For certain experiments it is necessary to know the degree of polarization of the radiation being used. Also, when synchrotron radiation and a monochromator are combined the polarization characteristic of both should be known in order to make full use of these polarization properties. The polarizing effect of monochromators (i.e., diffraction gratings) have been measured at the Seya angle and at grazing angles for various spectral orders. Experimental evidence is presented which shows that the reciprocity law holds for polarization by reflection where the angle of incidence and diffraction are unequal. These results are reviewed along with the techniques for measuring the degree of polarization.

Samson, J. A. R.↗
NASA NTRS1980

Polar nephelometer for atmospheric particulate studies

A unique polar nephelometer was designed and constructed for the measurement of atmospheric particulate characteristics. The nephelometer produces visible light from a self-contained laser to irradiate an air sample drawn into the instrument. The light scattered from the particulates and molecules in the sample is detected as a function of scattering angle for each of four different incident light polarizations. These measurements are used to determine the particulate scattering matrix which is a function of the size, shape, and index of refraction of the particles. The region of sensitivity for the measurements corresponds to the size range of particles that strongly affects visible radiative transfer in the atmosphere, which is the primary application for the derived information.

Hansen, M. Z.↗
NASA NTRS1997

Optical Detection of the Hidden Nuclear Engine in NGC 4258

The subparsec masing disk recently found to be orbiting a central mass of approx. 3.6 x 10(exp 7) Ms in the Seyfert/LINER galaxy NGC 4258 (Miyoshi and coworkers) provides the most compelling evidence to date for the existence of a massive black hole in the nucleus of a galaxy. The disk is oriented nearly edge-on, and the X-ray spectrum is heavily absorbed. Therefore, in this galaxy, the optical emission-line spectrum generally exhibited by an active galactic nucleus is perhaps best sought using polarized light: probing for light scattered off material surrounding the central source. New polarimetry of NGC 4258 has uncovered a compact polarized nucleus whose spectrum consists of a faint blue continuum similar to those of unobscured quasars (F(sub upsilon) proportional to upsilon(sup -1.1)), plus broadened (approx. 1000 km/s) emission lines. The lines are strongly linearly polarized (5%-10%) at a position angle (85 deg +/- 2 deg) coincident with the plane of the maser disk. This result provides substantiating evidence for a weakly active central engine in NGC 4258 and for the existence of obscuring, orbiting tori, which impart many of the perceived distinctions between various types of active galaxies.

Wilkes, Belinda J.↗
NASA NTRS2002

HST NICMOS Observations of the Polarization of NGC 1068

We have observed the polarized light at 2 microns in the center of NGC 1068 with HST (Hubble Space Telescope) NICMOS (Near Infrared Camera Multi Object Spectrometer) Camera 2. The nucleus is dominated by a bright, unresolved source, polarized at a level of 6.0 +/- 1.2% with a position angle of 122 degrees +/- 1.5 degrees. There are two polarized lobes extending tip to 8" northeast and southwest of the nucleus. The polarized flux in both lobes is quite clumpy, with the maximum polarization occurring in the southwest lobe at a level of 17% when smoothed to 0.23" resolution. The perpendiculars to the polarization vectors in these two lobes point back to the intense unresolved nuclear source to within one 0.076" Camera 2 pixel, thereby confirming that this source is the origin of the scattered light and therefore the probable AGN (Active Galactic Nuclei) central engine. Whereas the polarization of the nucleus is probably caused by dichroic absorption, the polarization in the lobes is almost certainly caused by scattering, with very little contribution from dichroic absorption. Features in the polarized lobes include a gap at a distance of about 1" from the nucleus toward the southwest lobe and a "knot" of emission about 5" northwest of the nucleus. Both features had been discussed by groundbased observers, but they are much better defined with the high spatial resolution of NICMOS. The northeast knot may be the side of a molecular cloud that is facing the nucleus, which cloud may be preventing the expansion of the northeast radio lobe at the head of the radio synchrotron-radiation-emitting jet. We also report the presence of two ghosts in the Camera 2 polarizers.

Simpson, Janet P.↗
NASA NTRS2006

Polarimeter Arrays for Cosmic Microwave Background Measurements

We discuss general system architectures and specific work towards precision measurements of Cosmic Microwave Background (CMB) polarization. The CMB and its polarization carry fundamental information on the origin, structure, and evolution of the universe. Detecting the imprint of primordial gravitational radiation on the faint polarization of the CMB will be difficult. The two primary challenges will be achieving both the required sensitivity and precise control over systematic errors. At anisotropy levels possibly as small as a few nanokelvin, the gravity-wave signal is faint compared to the fundamental sensitivity limit imposed by photon arrival statistics, and one must make simultaneous measurements with large numbers, hundreds to thousands, of independent background-limited direct detectors. Highly integrated focal plane architectures, and multiplexing of detector outputs, will be essential. Because the detectors, optics, and even the CMB itself are brighter than the faint gravity-wave signal by six to nine orders of magnitude, even a tiny leakage of polarized light reflected or diffracted from warm objects could overwhelm the primordial signal. Advanced methods of modulating only the polarized component of the incident radiation will play an essential role in measurements of CMB polarization. One promising general polarimeter concept that is under investigation by a number of institutions is to first use planar antennas to separate millimeter-wave radiation collected by a lens or horn into two polarization channels. Then the signals can be fed to a pair of direct detectors through a planar circuit consisting of superconducting niobium microstrip transmission lines, hybrid couplers, band-pass filters, and phase modulators to measure the Stokes parameters of the incoming radiation.

Stevenson, Thomas↗
NASA NTRS2021

A Layered Debris Disk around M Star TWA 7 in Scattered Light

We have obtained Hubble Space Telescope (HST) coronagraphic observations of the circumstellar disk around M star TWA 7 using the Space Telescope Imaging Spectrograph (STIS) instrument in visible light. Together with archival observations, including HST/NICMOS using the F160W filter and Very Large Telescope/SPHERE at the H-band in polarized light, we investigate the system in scattered light. By studying this nearly face-on system using geometric disk models and Henyey–Greenstein phase functions, we report a new discovery of a tertiary ring and a clump. We identify a layered architecture: three rings, a spiral, and an ≈150 au 2 elliptical clump. The most extended ring peaks at 28 au, and the other components are on its outskirts. Our point-source detection-limit calculations demonstrate the necessity of disk modeling in imaging fainter planets. Morphologically, we witness a clockwise spiral motion, and the motion pattern is consistent with both solid body motion and local Keplerian motion; we also observe underdensity regions for the secondary ring that might result from mean-motion resonance or moving shadows: both call for re-observations to determine their nature. Comparing multi-instrument observations, we obtain blue STIS-NICMOS color, a STIS-SPHERE radial distribution peak difference for the tertiary ring, and a high SPHERE-NICMOS polarization fraction; these aspects indicate that TWA 7 could retain small dust particles. By viewing the debris disk around M star TWA 7 at a nearly face-on vantage point, our study allows for the understanding of such disks in scattered light in both system architecture and dust property.

Debris disks↗
NASA NTRS2006

Polarization Effects Aboard the Space Interferometry Mission

For precision displacement measurements, laser metrology is currently one of the most accurate measurements. Often, the measurement is located some distance away from the laser source, and as a result, stringent requirements are placed on the laser delivery system with respect to the state of polarization. Such is the case with the fiber distribution assembly (FDA) that is slated to fly aboard the Space Interferometry Mission (SIM) next decade. This system utilizes a concatenated array of couplers, polarizers and lengthy runs of polarization-maintaining (PM) fiber to distribute linearly-polarized light from a single laser to fourteen different optical metrology measurement points throughout the spacecraft. Optical power fluctuations at the point of measurement can be traced back to the polarization extinction ration (PER) of the concatenated components, in conjunction with the rate of change in phase difference of the light along the slow and fast axes of the PM fiber.

fiber distribution↗
NASA NTRS2014

Lightning Current Measurement with Fiber-Optic Sensor

A fiber-optic current sensor is successfully developed with many potential applications for electric current measurement. Originally developed for in-flight lightning measurement, the sensor utilizes Faraday Effect in an optical fiber. The Faraday Effect causes linear light polarization in a fiber to rotate when the fiber is exposed to a magnetic field. The polarization change is detected using a reflective polarimetric scheme. Forming fiber loops and applying Ampere's law, measuring the total light rotation results in the determination of the total current enclosed. The sensor is conformable to complex structure geometry. It is also non-conductive and immune to electromagnetic interference, saturation or hysteresis. Installation is non-intrusive, and the sensor can be safely routed through flammable areas. Two similar sensor systems are described in this paper. The first system operates at 1310nm laser wavelength and is capable of measuring approximately 300 A - 300 kA, a 60 dB range. Laboratory validation results of aircraft lighting direct and in-direct effect current amplitudes are reported for this sensor. The second system operates at 1550nm wavelength and can measure about 400 A - 400 kA. Triggered-lightning measurement data are presented for this system. Good results are achieved in all cases.

Nguyen, Truong X.↗
NASA NTRS1992

Radiometric calibration of a polarization-sensitive sensor

The radiometric accuracy of a sensor is adversely affected by scene polarization if its optical system is sensitive to polarization. Tests performed on the reflective bands of the NS001 Thematic Mapper simulator, an aircraft multispectral scanner, show that it is very sensitive to the polarization state of the incoming radiations. For 100 percent linearly polarized light, errors in the measured intensity vary from -40 to +40 percent, depending on the scan angle and spectral band. To estimate polarization-induced errors in the intensity measured at aircraft level, the intensity and polarization of the atmospheric radiances were simulated using a realistic earth-atmosphere radiative transfer model. For the polarization of atmospheric radiances in the solar meridian plane over a vegetated target, intensity errors may range from -10 to + 10 percent. The polarization-induced errors are highest in the shortest NS001 spectral band (0.450-0.525 microns) because of large atmospheric polarizations contributed by Rayleigh particles and small diluting effects caused by the small contributions of weakly polarized radiations coming from aerosols and the surface. Depending on the illumination and view angles, the errors in derived surface reflectance due to the radiance errors can be very large. In particular, for large off-nadir view angles in the forward scattered direction when the sun is low, the relative errors in the derived surface reflectance can be as large as 4 to 5 times the relative error in the radiances. Polarization sensitivity errors cannot be neglected for the shorter wavelengths when the surface reflectance contribution to atmospheric radiances is very small.

Ahmad, Suraiya P.↗
NASA NTRS1994

Multilayer Thin Film Polarizer Design for Far Ultraviolet using Induced Transmission and Absorption Technique

Good theoretical designs of far ultraviolet polarizers have been reported using a MgF2/Al/MgF2 three layer structure on a thick Al layer as a substrate. The thicknesses were determined to induce transmission and absorption of p-polarized light. In these designs Al optical constants were used from films produced in ultrahigh vacuum (UHV: 10(exp -10) torr). Reflectance values for polarizers fabricated in a conventional high vacuum (p approx. 10(exp -6 torr)) using the UHV design parameters differed dramatically from the design predictions. Al is a highly reactive material and is oxidized even in a high vacuum chamber. In order to solve the problem other metals have been studied. It is found that a larger reflectance difference is closely related to higher amplitude and larger phase difference of Fresnel reflection coefficients between two polarizations at the boundary of MgF2/metal. It is also found that for one material a larger angle of incidence from the surface normal brings larger amplitude and phase difference. Be and Mo are found good materials to replace Al. Polarizers designed for 121.6 nm with Be at 60 deg and with Mo at 70 deg are shown as examples.

Kim, Jongmin↗
NASA NTRS2023

Radiative interaction of atmosphere and surface: write up with elements of code

In passive satellite remote sensing of the Earth, separation of the path radiance (atmosphere-only contribution) from the surface reflection remains a “significant challenge”. Recent literature names it among the gaps in radiative transfer (RT) topics that “require continued research in the near future”. The challenge comes from multiple reflections (bouncing) between the atmosphere and surface – radiative interaction. In this paper we use a known RT technique, the matrix-operator method (MOM), and a new modification of the monochromatic vector RT (vRT) code IPOL (Intensity and POLarization) to simulate the interaction of a plane-parallel atmosphere and a few widely used surface reflection models. Following the idea of the Green’s function method, IPOL no longer takes the surface model parameters on input. Instead, it provides the path radiance, and the atmospheric reflection and transmission matrices as output. Despite many RT codes use the MOM formalism, this output does not seem common. The surface reflection matrix is computed externally. Therefore, this paper extends the Green’s function atmospheric correction technique to the case of polarized light. Aiming clarity rather than performance, we explain in Python the structure of the surface matrices for the isotropic (Lambertian), directional unpolarized, and polarized ocean reflection models. We then combine these surface matrices and the precomputed IPOL output to get numerically accurate signal at the top of atmosphere (TOA) and test it vs. published benchmarks. Then, for each benchmark scenario we show how to get the surface from the TOA signal, i.e. perform the RT-based atmospheric correction.

radiative transfer↗
NASA NTRS1987

Development of optical modulators for measurements of solar magnetic fields

The measurement of polarized light allows solar astronomers to infer the magnetic field on the Sun. The accuracy of these measurements is dependent on the stable retardation characteristics of the polarization modulators used to minimize the atmospheric effects seen in ground-based observations. This report describes the work by the Space Science Laboratory at Marshall Space Flight Center to improve two types of polarization modulators. As a result, the timing characteristics for both electrooptic crystals (KD*Ps) and liquid crystal devices (LCDs) have been studied and will be used to enhance the capabilities of the MSFC Vector Magnetograph.

West, E. A.↗
NASA NTRS2012

Dual Double-Wedge Pseudo-Depolarizer with Anamorphic PSF

A polarized scene, which may occur at oblique illumination angles, creates a radiometric signal that varies as a function of viewing angle. One common optical component that is used to minimize such an effect is a polarization scrambler or depolarizer. As part of the CLARREO mission, the SOLARIS instrument project at Goddard Space Flight Center has developed a new class of polarization scramblers using a dual double-wedge pseudo-depolarizer that produces an anamorphic point spread function (PSF). The SOLARIS instrument uses two Wollaston type scramblers in series, each with a distinct wedge angle, to image a pseudo-depolarized scene that is free of eigenstates. Since each wedge is distinct, the scrambler is able to produce an anamorphic PSF that maintains high spatial resolution in one dimension by sacrificing the spatial resolution in the other dimension. This scrambler geometry is ideal for 1-D imagers, such as pushbroom slit spectrometers, which require high spectral resolution, high spatial resolution, and low sensitivity to polarized light. Moreover, the geometry is applicable to a wide range of scientific instruments that require both high SNR (signal-to-noise ratio) and low sensitivity to polarized scenes

Hill, Peter↗
NASA NTRS1991

FOS spectroscopy of resolved structure in the nucleus of NGC 1068

The results of FOS spectroscopy of the continuum peak of NGC 1068 in the wavelength range 2200-7000 A are reported. Detailed analysis reveals the emission lines to be complex in shape and to consist of a number of different velocity components. Both the Balmer lines and the strong forbidden lines have a contribution from a component with full width at half-maximum on the order of 2200 km/s. However, the broad H-beta emission observed in polarized light is not detected. This implies that the continuum peak is not the mirror which reflects light from the hidden Seyfert I nucleus. It could possibly contribute some of the reflected light, but the equivalent width of the H-beta BLR line, if present at all, is much weaker than expected from the ground-based nuclear polarized-flux spectrum.

Caganoff, S.↗
NASA NTRS1976

The Lockheed alternate partial polarizer universal filter

A tunable birefringent filter using an alternate partial polarizer design has been built. The filter has a transmission of 38% in polarized light. Its full width at half maximum is .09A at 5500A. It is tunable from 4500 to 8500A by means of stepping motor actuated rotating half wave plates and polarizers. Wave length commands and thermal compensation commands are generated by a PPD 11/10 minicomputer. The alternate partial polarizer universal filter is compared with the universal birefringent filter and the design techniques, construction methods, and filter performance are discussed in some detail. Based on the experience of this filter some conclusions regarding the future of birefringent filters are elaborated.

Title, A. M.↗