Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pore water”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Microfracture-pore structure characterization and water-rock interaction in three lithofacies of the Lower Eagle Ford Formation

The microfracture-pore structures and water-rock interactions of eight samples of three typical lithofacies (three limestone, three wackestone, and two mudstone) from the Lower Eagle Ford Formation have been investigated using an integrated methodology. The methods used were X-ray diffraction (XRD), total organic carbon (TOC) content, pyrolysis, thin-section petrography, scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), spontaneous water imbibition, and water vapor & nitrogen physisorption. Petrophysical properties such as organic richness, maturity, mineral composition, types and patterns of microfractures and pores, porosity, pore-throat size distribution, pore size distribution, pore connectivity, water adsorption and desorption behavior were determined from these methods, and the results compared among the three lithofacies. For example, the three limestone EAS samples and three wackestone DM samples show a low porosity range from 2.02–3.35%, whereas the two mudstone VRU samples exhibit a much large average porosity of 11.7% by MIP results. Nitrogen physisorption results show that pore size distributions have a good similarity in N2 adsorption volume for the samples with similar lithology. Microfractures are morphologically divided into seven types, with their definitions & pictorial examples presented and possible formation mechanisms proposed. In addition, the water vapor physisorption behavior and their controlling factors are discussed. Here, the water adsorption capacity shows a positive relationship (R 2 = 0.90) with clay content and a negative relationship (R 2 = 0.99) with carbonate content. In general, this integrated study of microfracture-pore structure characterization and water-rock interaction provides some insights of water vapor adsorption behavior in different lithofacies and whether microfractures could be an important pathway for fluid flow.

58 GEOSCIENCES↗
NASA NTRS1973

A new method for the determination of thin film porosity

Internal reflection spectroscopy may be used to determine presence of water in thin film pores. Presence of water in such pores is function of relative humidity and pore size. Thus, one can determine pore size by controlling humidity. Fluids with surface tension different from that of water can be used to detect pores.

Beck, T. R.↗
DOE OSTI2020

Investigating Liquid Water Transport in Different Pore Structure of Gas Diffusion Layers for PEMFC Using Lattice Boltzmann Method

Proton exchange membrane fuel cells (PEMFC) require a gas diffusion layer (GDL) to aid in the transport of liquid fuel to the catalyst layer. In this work, direct modeling using the Lattice Boltzmann Method (LBM) was applied to X-ray CT scans of four different carbon gas diffusion layers to understand the mass transport properties through the samples. Three injection orientations were used to study local saturation levels, water evolution through the sample, and mass transport behavior at breakthrough conditions. The LBM, combined with computational fluid dynamic modeling techniques, can accurately predict liquid saturation at the macro and micro scale, which provides more insight into the mass transport phenomena through the GDL. The change of pore structure and orientation in both the in-plane and through-plane determines the path that liquid water must take, which could aid or impact PEMFC performance. The outcomes from this work will also benefit any research that needs knowledge of internal mass transport qualities of gas diffusion media.

Sepe, M.↗
DOE OSTI2026

Water as a gas separation membrane

Efficient gas separation membranes are essential for carbon capture, biogas upgrading, and hydrogen purification. Inspired by how plants absorb CO 2 through water, we present a membrane platform that uses liquid water as the selective layer. Hydrophilic sub-100-nm pores stabilize water through strong capillary forces, enabling operation at feed pressures above 72 bar under dry and humid conditions. Selectivity is governed by gas solubility in water, while permeance is tuned by adjusting the water layer thickness. Reducing this thickness below 200 nm yields CO 2 permeances up to 11,600 gas permeation units with CO 2 :N 2 , CO 2 :CH 4 , and CO 2 :H 2 selectivities of 40, 26, and 31, respectively, surpassing the performance of state-of-the-art membranes. Operation is sustained for over a week without water loss, and performance scales using commercially available porous polymer supports under mixed-gas crossflow conditions. Water’s dissolution-based transport avoids saturation and reaction-rate limits, enabling a robust, high-performance, and environmentally benign gas separation platform.

08 HYDROGEN↗
DOE OSTI2021

Impact of downhole pressure and fluid-access on the effectiveness of wellbore cement expansion additives

Autogenous shrinkage of wellbore cement widely impairs zonal isolation. MgO-based cement expansion additives (CEAs) can mitigate this shrinkage, or even impart net expansion, by creating porosity through displacive crystal growth-processes. However, both MgO hydration and autogenous shrinkage behaviour depend strongly on stress state. Evaluation of CEA performance in wellbore cements therefore requires testing under elevated pressures representative for subsurface environments. We report experiments addressing the chemical and bulk volume changes that occur in cement hydrating at 10 MPa confining pressure and 90 °C. Volumetric response was investigated as function of MgO concentration, external water supply, and pore pressure decrease through water consumption during reaction. Results show the bulk expansion achieved using MgO-based CEAs diminishes markedly with increasing effective confining pressure or, equivalently, upon restricting fluid supply. This reduced expansion-potential under pressure has profound implications for slurry design, notably regarding CEA-concentrations required to counteract micro-annulus formation while maintaining low cement permeability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microtopographic and Depth Controls on Active Layer Chemistry in Arctic Polygonal Ground: Supporting Data

Polygonal ground is a signature characteristic of the Arctic, and permafrost thaw can potentially generate substantial feedbacks to Arctic ecosystems and climate. This study describes the first comprehensive spatial examination of active layer biogeochemistry that extends across high- and low-centered polygons and their features, including depth. Water chemistry measurements were made on active layer water samples collected near Barrow, Alaska during summer, 2012. Several significant differences in chemistry were observed between high- and low-centered polygons suggesting polygon types may be useful for landscape-scale geochemical classification. However, differences were found for polygon features (centers and troughs) for analytes that were not significant for type, suggesting that finer scale features control biogeochemistry in a different way than polygon type. Depth variations were also significant, demonstrating important multi-dimensional aspects of polygonal ground biogeochemistry. These results have major implications for understanding how polygonal ground ecosystems function, and how they may respond to future change. This data package includes one *.csv data file and one *.pdf user guide. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

The force exerted by the membrane potential during protein import into the mitochondrial matrix

The force exerted on a targeting sequence by the electrical potential across the inner mitochondrial membrane is calculated on the basis of continuum electrostatics. The force is found to vary from 3.0 pN to 2.2 pN (per unit elementary charge) as the radius of the inner membrane pore (assumed aqueous) is varied from 6.5 to 12 A, its measured range. In the present model, the decrease in force with increasing pore width arises from the shielding effect of water. Since the pore is not very much wider than the distance between water molecules, the full shielding effect of water may not be present; the extreme case of a purely membranous pore without water gives a force of 3.2 pN per unit charge, which should represent an upper limit. When applied to mitochondrial import experiments on the protein barnase, these results imply that forces between 11 +/- 2 pN and 13.5 +/- 2.5 pN catalyze the unfolding of barnase in those experiments. A comparison of these results with unfolding forces measured using atomic force microscopy is made.

Models, Molecular↗
DOE OSTI2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Factors which could explain the slowing down of the metakaolin reaction in LC{sup 3} blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in solution filled pores. Internal relative humidity measurements indicate that at 28 days solution is present only in pores with radii below 13 nm. An enhancement of metakaolin reaction was obtained at late ages when the larger capillaries are filled with solution. The lower limit of the water filled pores was more difficult to analyse since there is a lack of precision in determining interfacial energies of hydrates and pore solution of the system. However, this study gives an indication of order of magnitude where the growth of hydrates could be slowed down.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pore-Scale Dynamics of Liquid CO2–Water Displacement in 2D Axisymmetric Porous Micromodels Under Strong Drainage and Weak Imbibition Conditions: High-Speed μPIV Measurements

Resolving pore-scale transient flow dynamics is crucial to understanding the physics underlying multiphase flow in porous media and informing large-scale predictive models. Surface properties of the porous matrix play an important role in controlling such physics, yet interfacial mechanisms remain poorly understood, in part due to a lack of direct observations. This study reports on an experimental investigation of the pore-scale flow dynamics of liquid CO 2 and water in two-dimensional (2D) circular porous micromodels with different surface characteristics employing high-speed microscopic particle image velocimetry (μPIV). The design of the micromodel minimized side boundary effects due to the limited size of the domain. The high-speed μPIV technique resolved the spatial and temporal dynamics of multiphase flow of CO 2 and water under reservoir-relevant conditions, for both drainage and imbibition scenarios. When CO 2 displaced water in a hydrophilic micromodel (i.e., drainage), unstable capillary fingering occurred and the pore flow was dominated by successive pore-scale burst events (i.e., Haines jumps). When the same experiment was repeated in a nearly neutral wetting micromodel (i.e., weak imbibition), flow instability and fluctuations were virtually eliminated, leading to a more compact displacement pattern. Energy balance analysis indicates that the conversion efficiency between surface energy and external work is less than 30%, and that kinetic energy is a disproportionately smaller contributor to the energy budget. This is true even during a Haines jump event, which induces velocities typically two orders of magnitude higher than the bulk velocity. These novel measurements further enabled direct observations of the meniscus displacement, revealing a significant alteration of the pore filling mechanisms during drainage and imbibition. While the former typically featured burst events, which often occur only at one of the several throats connecting a pore, the latter is typically dominated by a cooperative filling mechanism involving simultaneous invasion of a pore from multiple throats. This cooperative filling mechanism leads to merging of two interfaces and releases surface energy, causing instantaneous high-speed events that are similar, yet fundamentally different from, burst events. Finally, pore-scale velocity fields were statistically analyzed to provide a quantitative measure of the role of capillary effects in these pore flows.

Li, Yaofa↗
DOE OSTI2021

Strong Enhancement of Nanoconfined Water Mobility by a Structure Breaking Salt

For the majority of the water present on earth, the two most important factors influencing its behavior are confinement, in either inorganic or organic matrixes, and the presence of solutes. Here, we investigate the effect of confinement in 3 nm pores on water diffusivity in aqueous solutions with archetypical solutes, a structure making (kosmotrope) NaCl and a structure breaking (chaotrope) KCl, up to 1.0 M in concentration. The water diffusivity in bulk aqueous solutions in such a concentration range is known to decrease very slightly in the presence of NaCl and increase very slightly in the presence of KCl. However, here we observe the water diffusivity in confined H 2 O–KCl increases by a factor of 2 compared to the pure water diffusivity in the same confinement. This unusually strong cumulative effect of confinement and a structure breaking additive may have profound implications for the mobility and transport of aqueous species in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Differences in water and vapor transport through angstrom-scale pores in atomically thin membranes

Abstract The transport of water through nanoscale capillaries/pores plays a prominent role in biology, ionic/molecular separations, water treatment and protective applications. However, the mechanisms of water and vapor transport through nanoscale confinements remain to be fully understood. Angstrom-scale pores (~2.8–6.6 Å) introduced into the atomically thin graphene lattice represent ideal model systems to probe water transport at the molecular-length scale with short pores (aspect ratio ~1–1.9) i.e., pore diameters approach the pore length (~3.4 Å) at the theoretical limit of material thickness. Here, we report on orders of magnitude differences (~80×) between transport of water vapor (~44.2–52.4 g m −2 day −1 Pa −1 ) and liquid water (0.6–2 g m −2 day −1 Pa −1 ) through nanopores (~2.8–6.6 Å in diameter) in monolayer graphene and rationalize this difference via a flow resistance model in which liquid water permeation occurs near the continuum regime whereas water vapor transport occurs in the free molecular flow regime. We demonstrate centimeter-scale atomically thin graphene membranes with up to an order of magnitude higher water vapor transport rate (~5.4–6.1 × 10 4 g m −2 day −1 ) than most commercially available ultra-breathable protective materials while effectively blocking even sub-nanometer (>0.66 nm) model ions/molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of CO 2 on the water slip flow at silica surfaces for nanometer slit pores of talc

In our previous study, Molecular Dynamics (MD) simulated water flow with no dissolved gas in nanometer slit pores of the hydrophobic talc surfaces revealed a slip length of about 0.5 nm, which is close to the size of “water exclusion zone” but much less than experimental slip length. Atomic Force Microscopy (AFM) imaging confirmed the presence of pancake shape nanobubbles at the hydrophobic talc (001) surface (size from tens to hundreds of nanometers). The effect of CO 2 on water slip flow in talc nanopores is reported to reveal the importance of dissolved gas for confined fluid flow. MD simulated 7 nm CO 2 nanobubbles were found to attach and spread at the talc (001) surface, consistent with the AFM observation. Simulated CO 2 saturated water flow in the slit pores of talc (001) surfaces predicted the generation of CO 2 nanobubbles at the end of the slit pore, due to the stabilization of a CO 2 film at the talc (001) surfaces and a water barrier at the edge surfaces of talc. A “critical thickness” of about 1.5 nm was found for CO 2 nanobubbles to be stabilized at the end of the talc (001) surface. With 1.5 nm CO 2 nanobubbles at the talc (001) surface of a 6 nm slit pore, a water slip length of 1.8 nm was determined. Furthermore, the nanometer slit pore simulations with dissolved CO 2 in water revealed an increased slip length. It is expected that an increased slip length value would be found with an increased CO 2 film thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cation-Induced Disruption of the Local Structure of Water in Faujasite

Here, the changes in the structure of water confined in faujasite were resolved by a series of ab initio molecular dynamic simulations of explicit water molecules in faujasite with varying Si/Al ratio and counterions present. Radial distribution functions of water oxygen atom pairs, as well as counterions to Al pairs, were calculated to quantify the structure of water in faujasite and the distribution of counterions in the water-filled faujasite pores. Radial distribution functions reveal that confinement without counterions results in more water molecules hydrogen bound to each other. In hydrogen-exchanged faujasite, the increase in aluminum content led to the disruption of the confined water structure as charge-compensating protons dissociated from Al tetrahedra and entered the liquid water in the pores. In addition, a potential of mean force of proton transfer shows that protons are thermodynamically favored to be in the liquid water rather than bound on Al tetrahedra. Exchanged Na + and La 3+ counterions, which remain closer to Al tetrahedra in liquid water than H + , also disordered the confined water structure. Two La 3+ ions disrupted water less than did six Na + ions, suggesting that, for the alkali and lanthanide ions, the number of counterions in FAU has a larger effect on the structure of water than the charge of the ion itself.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Moisture-mineral interactions drive bacterial and organic matter turnover in glacier-sourced riparian sediments undergoing pedogenesis

Glacial recession is occurring at unprecedented rates resulting in increased sediment accumula-tions in some riverine ecosystems. Increased sediment deposition has implications for ecosystem stability (e.g., floods and river paths) and environmental services (e.g., carbon sequestration). Soils and sediments have an enormous potential to retain carbon (C), predominantly due to sorp-tion to mineral surfaces. However, C persistence may be sensitive to climate-change induced temperature and moisture variations. We coupled ultrahigh resolution organic matter composition classification with bacterial characterization and respiration measurements to test the combined effects of temperature (4 vs 20°C) and moisture (50 vs 100% water-filled pore space) on C turn-over in sediments maintained under different mineralogical conditions (illite-amended vs non-amended). Here we show that the inhibition of CO 2 emissions from the combined effect of in-creased moisture content and illite was reflected in the turnover of key molecular signatures, such as the nominal oxidation state of C, often irrespective of temperature. However, shifts in bacteri-al communities from a coupled moisture-mineral interaction, were temperature-dependent. Our results highlight the importance of moisture in driving mineral-organic interactions and suggest that C in clay-rich, water-saturated sediments is both thermodynamically unfavorable and miner-al-protected from microbial consumption.

58 GEOSCIENCES↗
DOE OSTI2022

Nanoscale trace-element zoning in pyrite framboids and implications for paleoproxy applications

Pyrite framboids (spherical masses of nanoscale pyrite) are among the earliest textures of pyrite to form in sediments. It has been proposed that their trace-element (TE) contents can be used to track the TE composition of the water column in which they formed. However, it is not clear how these TEs are associated with the framboidal pyrite grains. For instance, it is important to know whether they are incorporated uniformly or are enriched in different regions of the framboid. Here, we used high-resolution scanning transmission electron microscopy to identify chemical zoning within pyrite framboids. We found that initial, nanoscale pyrite euhedral crystals, which make up the volumetric majority of the framboids, are covered/infilled by later pyrite that templates on the earlier pyrite. Further, this later pyrite is enriched in TEs, suggesting that many TEs are incorporated in pyrite relatively late (during early diagenesis; not in the water column). This observation suggests that although chemical analyses of pyrite framboids may provide ocean-water chemistry trends through time, the details are complex. Specifically, the TEs found in pyrite may be linked to adsorption onto organic matter, detrital material, and authigenic minerals such as Fe- and Mn-oxide phases followed by desorption in the sediments or release via dissolution and incorporation into pyrite as overgrowths on the initial nanoscale euhedral crystals that make up framboids. While the use of pyrite chemistry to understand past ocean conditions remains promising, and even diagenetic additions may not preclude the utility of pyrite for reconstructing ancient ocean conditions, care must be taken in interpretations because the end concentration may be influenced by diagenesis.

58 GEOSCIENCES↗
DOE OSTI2021

Precipitation and nitrogen application stimulate soil nitrous oxide emission

Precipitation and nitrogen (N) fertilization are the two most important drivers for soil nitrous oxide (N 2 O) emission. However, the effects of changes in N fertilization and precipitation patterns (i.e., precipitation intensity and frequency) on N 2 O emissions in agricultural fields are still unclear. In this study, we simulated soil N 2 O emission under different precipitation patterns (6 precipitation intensities, and 12 precipitation frequencies by either merging or splitting precipitation events) and N fertilization rates (low, typical, and high N fertilization) in a cornfield using the DeNitrification-DeComposition model. The model was parameterized and validated using meteorological data and N experimental measurements in Nashville, Tennessee, USA. Results showed that soil water filled pore space (WFPS) and simulated soil N 2 O emission increased as precipitation intensity increased. Less frequent but high intensity precipitation treatments reduced the soil WFPS by 25.2% and stimulated soil N 2 O emission by 45.3%, while more frequent but low intensity precipitation treatments increased soil WFPS by 9.0% and reduced soil N 2 O emission by 23.9%. Compared to typical N fertilization, the sensitivity of soil N 2 O emission to precipitation was higher under high N than low N fertilization treatments, and the response ratios were 50.0% and 40.1%, respectively. There was significant interactive effect of precipitation intensity and N fertilization on soil N 2 O emission. Furthermore, these findings improved our understanding of precipitation and N impacts on soil N 2 O emissions and provided useful knowledge for irrigation and N fertilizer management in agriculture to mitigate greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Spatial access and resource limitations control carbon mineralization in soils

Core-scale soil carbon fluxes are ultimately regulated by pore-scale dynamics of substrate availability and microbial access. These are constrained by physicochemical and biochemical phenomena (e.g. spatial access and hydrologic connectivity, physical occlusion, adsorption-desorption with mineral surfaces, nutrient and resource limitations). We conducted an experiment to determine how spatial access and resource limitations influence core-scale SOM mineralization, and how these are regulated by antecedent moisture conditions. Intact soil cores were incubated at field-moist vs. drought conditions, after which they were saturated from above (to simulate precipitation) or below (to simulate groundwater recharge). Soluble C (acetate) and N (nitrate) forms were added to some cores during the rewetting process to alleviate potential nutrient limitations. Respiration showed evidence of C-limitation, as C amendments increased the cumulative CO 2 evolved. Drought and rewetting increased soil respiration, and these soils also exhibited increased complex aromatic molecules in porewater. This newly available substrate appeared to alleviate nutrient limitations on respiration, because there were no further respiration increases with subsequent C and N amendments. We expected that respiration would be influenced by wetting direction, as simulated precipitation would mobilize C from the surface. However, as a main effect, this response was seen only in the C-amended soils, indicating that surface-C may not have been bioavailable. At the pore scale (porewater samples), compared to the baseline soils, drought and the C, N amendments caused a net loss of identified molecules when the soils were rewet from below, whereas wetting from above caused a net increase in identified molecules. This indicates that as soils were wet from below, the fresh inputs simulated the C-and N-limited microbial populations present deeper in the soil profile. Furthermore, our experiment highlights the complex and interactive role of antecedent moisture conditions, wetting direction, and resource limitations in driving core-scale C fluxes.

59 BASIC BIOLOGICAL SCIENCES↗