Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power offset”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Amplifier Output Power, Gain, Efficiency, and Bandwidth: A Comparative Study of GaN HEMT MMIC Multi-Stage Power Amplifiers versus Distributed Power Amplifiers

In this paper we present first, the results of a study conducted to investigate the microwave performance of a wideband (25-31 GHz) GaN MMIC distributed high power amplifier (HPA). Second, we compare and contrast the above performance with that of an alternate architecture that relies on two HPAs to provide contiguous 25-31 GHz coverage. The two HPAs operate across 25-28 GHz and 27-31 GHz, respectively, and can be switched in and out depending on the need at any given time. The parameters investigated includes the output power, gain, power added efficiency, bandwidth, RMS error vector magnitude for offset-QPSK, 8PSK, 16APSK, and 32 APSK waveforms, 3rd-order intermodulation distortion products, noise figure, and single sideband phase noise.

MMIC↗

Lyα signatures from direct collapse black holes

“Direct collapse black holes” (DCBHs) provide possible seeds for supermassive black holes that exist at z∼7. We study Lyα radiative transfer through simplified representations of the DCBH scenario. We find that gravitational heating of the collapsing cloud gives rise to a Lyα cooling luminosity of up to ∼10{sup 38}(M{sub gas}/10{sup 6}M{sub ⊙}){sup 2} erg s{sup −1}. Photoionization by a central source boosts the Lyα luminosity to L{sub α}∼10{sup 43}(M{sub BH}/10{sup 6} M{sub ⊙}) erg s{sup −1}, where M{sub BH} denotes the mass of the black hole powering this source. We predict that the width and velocity offsets of the Lyα spectral line range from a few tens to few thousands km s{sup −1}, depending sensitively on the evolutionary state of the cloud. We apply our predictions to observations of CR7, a luminous Lyα emitter at z∼7, which may be associated with a DCBH. If CR7 is powered by a black hole, then its Lyα flux requires that M{sub BH}>10{sup 7} M{sub ⊙}, which exceeds the mass of DCBHs when they first form. The observed width of the Lyα spectrum favors the presence of only a low column density of hydrogen, log[N{sub HI}/cm{sup −2}]∼19--20. The shape of the Lyα spectrum indicates that this gas is outflowing. These requirements imply that if CR7 harbors a DCBH, then the physical conditions that enabled its formation have been mostly erased, which is in agreement with theoretical expectations. These constraints weaken if the observed Lyα emission represents the central peak of a more extended halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Precise T and F intercomparison via VLF phase measurements

Continuous phase recording of the 16kHz transmission from GBR (UK) are being made and published midday phase data of GBR are received regularly from laboratories in the US, FGR, and UK. The local time scale (UTC, India), at the National Physical Laboratory in New Delhi, and those at the foreign laboratories are intercompared using the VLF phase data. A major factor which limits the accuracy of long term comparison is the seasonal variation in the VLF over delay over long paths. By taking into account the seasonal delay variations in a semiempirical way, the accuracy of time and frequency comparisons can be improved. Over a one year period, accuracy of a few parts in 10 to the 14th power in frequency and 1 to 2 micron sec in time were obtained. The relative frequency offset difference between UTC, (India) and UTC (PTB, Germany) of (7.0 + or - 0.1) x 10 to the -13 power agrees well with that obtained in a satellite experiment.

Gupta, A. S.↗

Optogalvanic stabilization and offset tuning of a carbon dioxide waveguide laser

A feedback loop employing the change in discharge impedance with output power is used to stabilize the frequency of a CO2 waveguide laser. The relatively high operating pressure of the laser combined with a zero offset feature in the feedback loop allows continuous tuning of the stabilized frequency over a 300-400 MHz range.

Kavaya, M. J.↗

Demonstration of a Switched Wideband GaN High-Power Amplifier for Future Space Missions

In this paper, we present the architecture of a Ka-band switched, wideband, high efficiency gallium nitride based high-power amplifier. The architecture is validated by characterizing the driver and power amplifier chain. The measured results include Pout, Gain, PAE, RMS EVM for QPSK, Offset-QPSK, 8PSK, 16APSK, and 16QAM constellations, 3rd order IMD products, and noise figure. The wide bandwidth and high output power of the amplifier will enable future user terminals to interoperate between multiple service provider’s space networks.

high power amplifier↗

Measurement of the anisotropy power spectrum of the radio synchrotron background

We present the first targeted measurement of the power spectrum of anisotropies of the radio synchrotron background, at 140 MHz, where it is the overwhelmingly dominant photon background. This measurement is important for understanding the background level of radio sky brightness, which is dominated by steep-spectrum synchrotron radiation at frequencies below ν ~ 0.5 GHz and has been measured to be significantly higher than that produced by known classes of extragalactic sources and most models of Galactic halo emission. We determine the anisotropy power spectrum on scales ranging from 2° to 0.2 arcmin with Low-Frequency Array observations of two 18-deg 2 fields – one centred on the Northern hemisphere’s coldest patch of radio sky where the Galactic contribution is smallest and the other offset from that location by 15°. We find that the anisotropy power is higher than that attributable to the distribution of point sources above 100 μJy in flux. Furthermore, this level of radio anisotropy power indicates that if it results from point sources, those sources are likely at low fluxes and incredibly numerous, and likely clustered in a specific manner.

79 ASTRONOMY AND ASTROPHYSICS↗

A Preliminary Model for Spacecraft Propulsion Performance Analysis Based on Nuclear Gain and Subsystem Mass-Power Balances

A preliminary model for spacecraft propulsion performance analysis based on nuclear gain and subsystem mass-power balances are presented in viewgraph form. For very fast missions with straight-line trajectories, it has been shown that mission trip time is proportional to the cube root of alpha. Analysis of spacecraft power systems via a power balance and examination of gain vs. mass-power ratio has shown: 1) A minimum gain is needed to have enough power for thruster and driver operation; and 2) Increases in gain result in decreases in overall mass-power ratio, which in turn leads to greater achievable accelerations. However, subsystem mass-power ratios and efficiencies are crucial: less efficient values for these can partially offset the effect of nuclear gain. Therefore, it is of interest to monitor the progress of gain-limited subsystem technologies and it is also possible that power-limited systems with sufficiently low alpha may be competitive for such ambitious missions. Topics include Space flight requirements; Spacecraft energy gain; Control theory for performance; Mission assumptions; Round trips: Time and distance; Trip times; Vehicle acceleration; and Minimizing trip times.

Chakrabarti, Suman↗

A study of solute transport of radiolysis products in crud and its effects on crud growth on PWR fuel pin

Our research examines the concentration of radiolysis species (H 2 , O 2 , and H 2 O 2 ) over the porous crud layer using a three dimensional time dependent solute transport model. A Monte Carlo random walk technique is adopted to simulate the transport behavior of the different species with various parametric studies of source term, crud thickness, and crud porosity. Particularly, this model employs a system of coupled mass transport and chemical interactions as the source term, which makes the problem non-linear. We also demonstrate that a negligible effect on radiolysis species concentrations change due to the consideration of source term. The crud thickness and porosity effect on the concentration distributions are notably observed. In general, higher concentration starts from the intersection of the heating surface with the chimney wall from the beginning and it reaches the equilibrium state within tens of seconds. The concentration profiles of the radiolysis species H 2 , O 2 , and H 2 O 2 can be directly related to corrosion issues. Furthermore, the direct application of this study to nuclear engineering research is to aid in the design of reactors with higher performance without experiencing an Axial Offset Anomaly (AOA), an unexpected measured shift in axial power distribution from predicted values.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Adjustable Stiffness Torsional Magnetic Spring with a Linear Stroke Length

This paper presents the analysis, mechanical design, and proof-of-principle experimental testing of a new type of adjustable stiffness torsional magnetic spring for an ocean generator application. Unlike prior published designs the rotary magnetic spring is shown to have a highly linear adjustable stroke length. The presented torsional spring is experimentally shown to be able to create a ± 45° angular stroke range with a peak torque of ± 39.1 N·m. The stiffness is adjusted by using a stepper motor to axially adjust the axial magnet offset. The stepper motor contains a brake so that power is not expended when maintaining a desired spring stiffness. It is shown that by using a series spring arrangement the stroke length can be extended to ± 90°.

16 TIDAL AND WAVE POWER↗

A step in time: Changes in standard-frequency and time-signal broadcasts, 1 January 1972

An improved coordinated universal time (UTC) system has been adopted by the International Radio Consultative Committee. It was implemented internationally by the standard-frequency and time-broadcast stations on 1 Jan. 1972. The new UTC system eliminates the frequency offset of 300 parts in 10 to the 10th power between the old UTC and atomic time, thus making the broadcast time interval (the UTC second) constant and defined by the resonant frequency of cesium atoms. The new time scale is kept in synchronism with the rotation of the Earth within plus or minus 0.7 s by step-time adjustments of exactly 1 s, when needed. A time code has been added to the disseminated time signals to permit universal time to be obtained from the broadcasts to the nearest 0.1 s for users requiring such precision. The texts of the International Radio Consultative Committee recommendation and report to implement the new UTC system are given. The coding formats used by various standard time broadcast services to transmit the difference between the universal time (UT1) and the UTC are also given. For users' convenience, worldwide primary VLF and HF transmissions stations, frequencies, and schedules of time emissions are also included. Actual time-step adjustments made by various stations on 1 Jan. 1972, are provided for future reference.

Chi, A. R.↗

A low noise synthesizer for autotuning and performance testing of hydrogen masers

A low noise synthesizer has been developed for use in hydrogen maser autotuning and performance evaluation. This synthesizer replaces the frequency offset maser normally used for this purpose and allows the user to maintain all masers in the ensemble at the same frequency. The synthesizer design utilizes a quartz oscillator with a BVA resonator. The oscillator has a frequency offset of 5 X 10 to the minus 8 power. The BVA oscillator is phase-locked to a hydrogen maser by means of a high gain, high stability phase-locked loop, employing low noise multipliers as phase error amplifiers. A functional block diagram of the synthesizer and performance data will be presented.

Cloeren, J. M.↗

Optical fiber characteristics and standards; Proceedings of the Meeting, Cannes, France, November 25-27, 1985

Papers are presented on outside vapor deposition, the plasma activated CVD process for large scale production of telecommunication fibers, axial lateral plasma deposition technology from plastic clad silica, coatings for optical fibers, primary coating characterization, and radiation-induced time dependent attenuation in a fiber. Topics discussed include fibers with high tensile strength, the characteristics and specifications of airborne fiber optic components, the baseband frequency response of multimode fibers, and fibers for local and broadband networks. Consideration is given to industrial measurements for single mode and multimode fibers, the characterization of source power distribution in a multimode fiber by a splice offset technique, the measurement of chromatic dispersion in a single mode optical, and the effect of temperature on the refracted near-field optical fiber profiling technique.

Bouillie, Remy↗

Integrated DSP/RF design for an MSAT transmitter

In mobile radio systems, the relatively inefficient use of the spectrum by existing Frequency Modulation (FM) techniques is limiting the available channels. Linear modulation methods are thought to provide the necessary push into more efficient usage of the spectrum. The limitation, to date, of the linear modulation techniques is the fact that the nonlinear power amplifier tends to spread the spectrum and thus offset any spectrum efficiency advantage. Linearization techniques are presently being investigated, in the literature, in order to recover some of the lost spectrum, due to spreading. To this end, digital signal processing (DSP) techniques are thought to provide real time predistortion methods. Some of the complex modulation blocks, normally confined to analog circuitry, are being implemented using DSP circuitry. This paper will address the linearization techniques, for mobile satellite (MSAT) transceivers, that use an integrated DSP/radio frequency design.

Stapleton, S. P.↗

Fine Calcium Carbonate Production by CO2 Mineralization of Industrial Waste Brines

Calcium carbonate production via CO2 mineralization offers an attractive route for carbon capture and utilization. The process sequesters CO2 in a stable form of fine precipitated calcium carbonate, a high-value product with unit price in the range of $230-$280/t and a global market projected to reach 99 M tons in 2020. However, two critical barriers hinders CO2 mineralization—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic location mismatch between Ca-rich solutions (or brines) CO2 generation sources (e.g. power plants) which often renders efficient integration of feedstocks impractical. To simultaneously address these challenges, a new process is developed to integrate CO2 mineralization-based carbonate production into the zero liquid discharge water (ZLD) treatment systems at coal-fired power plants. In this process, Ca-rich streams, such as produced water from oil and gas extraction or carbon storage operations, serves as the Ca-source. An H+/Na+ ion-exchange cycle is designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in solutions with high salinity. Ca-depleted streams are then treated within a centralized ZLD system. The process beneficially utilizes reject streams that are available at substantial quantities in the vicinity of coal power plants within several U.S regions. In addition, the process utilizes post-desulfurization flue gas from coal-fired power plants as is. The CO2 conversion reactions are performed in alkaline streams at ambient pressure, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, this process offers significant technical advantages in energy and CO2 footprint over the current paradigm of precipitated calcium carbonate production. Overall, the new process provides a unique route to integrate CO2 emissions control and wastewater treatment for coal power plants, while producing high-value product to offset the economic burden associated with waste management.

Simonetti, Dante↗

Fine Calcium Carbonate Production by CO2 Mineralization of Industrial Waste Brines

Calcium carbonate production via CO2 mineralization offers an attractive route for carbon capture and utilization. The process sequesters CO2 in a stable form of fine precipitated calcium carbonate, a high-value product with unit price in the range of $230-$280/t and a global market projected to reach 99 M tons in 2020. However, two critical barriers hinders CO2 mineralization—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic location mismatch between Ca-rich solutions (or brines) CO2 generation sources (e.g. power plants) which often renders efficient integration of feedstocks impractical. To simultaneously address these challenges, a new process is developed to integrate CO2 mineralization-based carbonate production into the zero liquid discharge water (ZLD) treatment systems at coal-fired power plants. In this process, Ca-rich streams, such as produced water from oil and gas extraction or carbon storage operations, serves as the Ca-source. An H+/Na+ ion-exchange cycle is designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in solutions with high salinity. Ca-depleted streams are then treated within a centralized ZLD system. The process beneficially utilizes reject streams that are available at substantial quantities in the vicinity of coal power plants within several U.S regions. In addition, the process utilizes post-desulfurization flue gas from coal-fired power plants as is. The CO2 conversion reactions are performed in alkaline streams at ambient pressure, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, this process offers significant technical advantages in energy and CO2 footprint over the current paradigm of precipitated calcium carbonate production. Overall, the new process provides a unique route to integrate CO2 emissions control and wastewater treatment for coal power plants, while producing high-value product to offset the economic burden associated with waste management.

Simonetti, Dante↗

Fine Calcium Carbonate Production by CO 2 Mineralization of Industrial Waste Brines

Calcium carbonate production via CO 2 mineralization offers an attractive route for carbon capture and utilization. The process sequesters CO 2 in a stable form of fine precipitated calcium carbonate, a high-value product with unit price in the range of $230-$280/t and a global market projected to reach 99 M tons in 2020. However, two critical barriers hinders CO 2 mineralization—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic location mismatch between Ca-rich solutions (or brines) CO 2 generation sources (e.g. power plants) which often renders efficient integration of feedstocks impractical. To simultaneously address these challenges, a new process is developed to integrate CO 2 mineralization-based carbonate production into the zero liquid discharge water (ZLD) treatment systems at coal-fired power plants. In this process, Ca-rich streams, such as produced water from oil and gas extraction or carbon storage operations, serves as the Ca-source. An H + /Na + ion-exchange cycle is designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in solutions with high salinity. Ca-depleted streams are then treated within a centralized ZLD system. The process beneficially utilizes reject streams that are available at substantial quantities in the vicinity of coal power plants within several U.S regions. In addition, the process utilizes post-desulfurization flue gas from coal-fired power plants as is. The CO 2 conversion reactions are performed in alkaline streams at ambient pressure, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, this process offers significant technical advantages in energy and CO 2 footprint over the current paradigm of precipitated calcium carbonate production. Overall, the new process provides a unique route to integrate CO 2 emissions control and wastewater treatment for coal power plants, while producing high-value product to offset the economic burden associated with waste management

Simonetti, Dante↗

Fine Calcium Carbonate Production by CO 2 Mineralization of Industrial Waste Brines

Calcium carbonate production via CO 2 mineralization offers an attractive route for carbon capture and utilization. The process sequesters CO 2 in a stable form of fine precipitated calcium carbonate, a high-value product with unit price in the range of $230-$280/t and a global market projected to reach 99 M tons in 2020. However, two critical barriers hinders CO 2 mineralization—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic location mismatch between Ca-rich solutions (or brines) CO 2 generation sources (e.g. power plants) which often renders efficient integration of feedstocks impractical. To simultaneously address these challenges, a new process is developed to integrate CO 2 mineralization-based carbonate production into the zero liquid discharge water (ZLD) treatment systems at coal-fired power plants. In this process, Ca-rich streams, such as produced water from oil and gas extraction or carbon storage operations, serves as the Ca-source. An H + /Na + ion-exchange cycle is designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in solutions with high salinity. Ca-depleted streams are then treated within a centralized ZLD system. The process beneficially utilizes reject streams that are available at substantial quantities in the vicinity of coal power plants within several U.S regions. In addition, the process utilizes post-desulfurization flue gas from coal-fired power plants as is. The CO 2 conversion reactions are performed in alkaline streams at ambient pressure, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, this process offers significant technical advantages in energy and CO 2 footprint over the current paradigm of precipitated calcium carbonate production. Overall, the new process provides a unique route to integrate CO 2 emissions control and wastewater treatment for coal power plants, while producing high-value product to offset the economic burden associated with waste management.

Simonetti, Dante↗

Fine Calcium Carbonate Production by CO 2 Mineralization of Industrial Waste Brines

Calcium carbonate production via CO 2 mineralization offers an attractive route for carbon capture and utilization. The process sequesters CO 2 in a stable form of fine precipitated calcium carbonate, a high-value product with unit price in the range of $230-$280/t and a global market projected to reach 99 M tons in 2020. However, two critical barriers hinders CO 2 mineralization—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic location mismatch between Ca-rich solutions (or brines) CO 2 generation sources (e.g. power plants) which often renders efficient integration of feedstocks impractical. To simultaneously address these challenges, a new process is developed to integrate CO 2 mineralization-based carbonate production into the zero liquid discharge water (ZLD) treatment systems at coal-fired power plants. In this process, Ca-rich streams, such as produced water from oil and gas extraction or carbon storage operations, serves as the Ca-source. An H + /Na + ion-exchange cycle is designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in solutions with high salinity. Ca-depleted streams are then treated within a centralized ZLD system. The process beneficially utilizes reject streams that are available at substantial quantities in the vicinity of coal power plants within several U.S regions. In addition, the process utilizes post-desulfurization flue gas from coal-fired power plants as is. The CO 2 conversion reactions are performed in alkaline streams at ambient pressure, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, this process offers significant technical advantages in energy and CO 2 footprint over the current paradigm of precipitated calcium carbonate production. Overall, the new process provides a unique route to integrate CO 2 emissions control and wastewater treatment for coal power plants, while producing high-value product to offset the economic burden associated with waste management.

Simonetti, Dante↗