Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power offset”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Land-use Leakage

Leakage occurs whenever actions to mitigate greenhouse gas emissions in one part of the world unleash countervailing forces elsewhere in the world so that reductions in global emissions are less than emissions mitigation in the mitigating region. While many researchers have examined the concept of industrial leakage, land-use policies can also result in leakage. We show that land-use leakage is potentially as large as or larger than industrial leakage. We identify two potential land-use leakage drivers, land-use policies and bioenergy. We distinguish between these two pathways and run numerical experiments for each. We also show that the land-use policy environment exerts a powerful influence on leakage and that under some policy designs leakage can be negative. International “offsets” are a potential mechanism to communicate emissions mitigation beyond the borders of emissions mitigating regions, but in a stabilization regime designed to limit radiative forcing to 3.7 2/m2, this also implies greater emissions mitigation commitments on the part of mitigating regions.

54 ENVIRONMENTAL SCIENCES↗

Broad band antennas and feed methods

Two or more Vivaldi antennas, consisting of two plates each, each with the antenna's natural impedance of approximately 100 ohms, are placed in parallel to achieve a 50 ohm impedance in the case of two antennas or other impedances (100/n ohms) for more than two antennas. A single Vivaldi antenna plate (half Vivaldi antenna) over a ground plane can also be used to achieve a 50 ohm impedance, or two or more single plates over a ground plane to achieve other impedances. Unbalanced 50 ohm transmission lines, e.g. coaxial cables, can be used to directly feed, the dual Vivaldi (four plate) antenna in a center fed angled center departure, or more desirably, a center fed offset departure configuration.

24 POWER TRANSMISSION AND DISTRIBUTION↗

HUBBLE SPACE TELESCOPE OBSERVATIONS OF SHORT GAMMA-RAY BURST HOST GALAXIES: MORPHOLOGIES, OFFSETS, AND LOCAL ENVIRONMENTS

We present the first comprehensive analysis of Hubble Space Telescope (HST) observations of short-duration gamma-ray burst (GRB) host galaxies. These observations allow us to characterize the galactic and local environments of short GRBs as a powerful constraint on the nature of their progenitors. Using the HST data for 10 short GRB hosts, we determine the host morphological properties, measure precise physical and host-normalized offsets relative to the galaxy centers, and study the locations of short GRBs relative to their host light distributions. We find that most short GRB hosts have exponential disk profiles, characteristic of late-type galaxies, but with a median size that is twice as large as that of long GRB hosts, commensurate with their higher luminosities. The observed distribution of projected physical offsets, supplemented by ground-based measurements, has a median of approx5 kpc, about five times larger than that for long GRBs, and in good agreement with predicted offset distributions for neutron star-neutron star (NS-NS) binary mergers. For the short GRB population as a whole, we find the following robust constraints: (1) approx>25% have projected offsets of approx<10 kpc; and (2) approx>5% have projected offsets of approx>20 kpc. We find no clear systematic trends for the offset distribution of short GRBs with and without extended soft emission. While the physical offsets are larger than those for long GRBs, the distribution of host-normalized offsets is nearly identical due to the larger size of short GRB hosts. Finally, unlike long GRBs, which are concentrated in the brightest regions of their host galaxies, short GRBs appear to under-represent the light distribution of their hosts; this is true even in comparison to core-collapse and Type Ia supernovae. Based on these results, we conclude that short GRBs are consistent with a progenitor population of NS-NS binaries, but partial contribution from prompt or delayed magnetar formation is also consistent with the data. Our study underscores the importance of future HST observations of the larger existing and growing sample of short GRB hosts, which will allow us to delineate the properties of the progenitor population.

79 ASTRONOMY AND ASTROPHYSICS↗

Two-band superlinear electroluminescence in GaSb based nanoheterostructures with AlSb/InAs{sub 1−x} Sb{sub x}/AlSb deep quantum well

We report on superlinear electroluminescent structures based on AlSb/InAs{sub 1−x}Sb{sub x}/AlSb deep quantum wells grown by MOVPE on n-GaSb:Te substrates. Dependence of the electroluminescence (EL) spectra and optical power on the drive current in nanoheterostructures with AlSb/InAs{sub 1−x}Sb{sub x}/AlSb quantum well at 77–300 K temperature range was studied. Intensive two-band superlinear EL in the 0.5–0.8 eV photon energy range was observed. Optical power enhancement with the increasing drive current at room temperature is caused by the contribution of the additional electron-hole pairs due to the impact ionization by the electrons heated at the high energy difference between AlSb and the first electron level E{sub e1} in the InAsSb QW. Study of the EL temperature dependence at 90–300 K range enabled us to define the role of the first and second heavy hole levels in the radiative recombination process. It was shown that with the temperature decrease, the relation between the energies of the valence band offset and the second heavy hole energy level changes due to the temperature transformation of the energy band diagram. That is the reason why the EL spectrum revealed radiative transitions from the first electron level E{sub e1} to the first hole level E{sub h1} in the whole temperature range (90–300 K), while the emission band related with the transitions to the second hole level occurred only at T > 200 K. Comparative examination of the nanostructures with high band offsets and different interface types (AlAs-like and InSb-like) reveals more intense EL and optical power enhancement at room temperature in the case of AlAs-like interface that could be explained by the better quality of the heterointerface and more efficient hole localization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Managing Wind Power Uncertainty Through Strategic Reserve Purchasing

With the rapidly increasing penetration of wind power, wind producers are becoming increasingly responsible for the deviation of the wind power output from the forecast. Such uncertainty results in revenue losses to the wind power producers (WPPs) due to penalties in ex-post imbalance settlements. This paper explores the opportunities available for WPPs if they can purchase or schedule some reserves to offset part of their deviation rather than being fully penalized in the real time market. The revenue for WPPs under such mechanism is modeled. The optimal strategy for managing the uncertainty of wind power by purchasing reserves to maximize the WPP's revenue is analytically derived with rigorous optimality conditions. The amount of energy and reserves that should be bid in the market are explicitly quantified by the probabilistic forecast and the prices of the energy and reserves. A case study using the price data from ERCOT and wind power data from NREL is performed to verify the effectiveness of the derived optimal bidding strategy and the benefits of reserve purchasing. Additionally, the proposed bidding strategy can also reduce the risk of variations on WPP's revenue.

17 WIND ENERGY↗

Unique nanotechnology converts carbon dioxide to valuable products

Carbon capture and management are increasing challenges associated with global warming. Current commercial-scale carbon dioxide (CO 2 ) capture technologies are associated with a heavy economic penalty – they require at least one-third of the plant’s steam and power to operate. The objective of this project was to develop and test an innovative nanotechnology that can utilize CO 2 , from coal-based power systems or other industrial sources, as the primary feedstock to produce commercially valuable products to potentially offset the cost of CO 2 capture. The scope of this project includes conversion of CO 2 to nanomaterials using two unique amino acids in synthetic flue gases and the completion of a process design and techno-economic and lifecycle analyses to demonstrate the economic feasibility and environmental impact of the developed technology. The International Energy Agency predicts that fossil fuels will continue to play a significant role in meeting global energy demand. The goal of the research is to lead to an affordable and transformational CO 2 capture and reuse technology that will reduce the release of CO 2 thereby reducing global climate variability and its enormous impact on our daily lives.

01 COAL, LIGNITE, AND PEAT↗

Strong Phonon–Phonon Interactions Securing Extraordinary Thermoelectric Ge 1– x Sb x Te with Zn-Alloying-Induced Band Alignment

The ability of substitution atoms to decrease thermal conductivity is usually ascribed to the enhanced phonon-impurity scattering by assuming the original phonon dispersion relations. In this study, we find that 10% SbGe alloying in GeTe modifies the phonon dispersions significantly, closes the acoustic–optical phonon band gap, increases the phonon–phonon scattering rates, and reduces the phonon group velocities. These changes, together with grain boundaries, nanoprecipitates, and planar vacancies, lead to a significant decrease in the lattice thermal conductivity. In addition, an extra 2–6% Zn alloying decreases the energy offset between valence band edges at L and Σ points in Ge 1–x Sb x Te that is found to be induced by the Ge 4s 2 lone pairs. Since Zn is free of s 2 lone pair electrons, substituting Ge with Zn atoms can consequently diminish the Ge 4s 2 lone-pair characters and reduce the energy offset, resulting in two energetically merged valence band maxima. Further, the refined band structures render a power factor up to 40 μW cm –1 K –2 in Ge 0.86 Sb 0.1 Zn 0.04 Te. Ultimately, a superhigh zT of 2.2 is achieved. This study clarifies the impacts of high-concentration substitutional atoms on phonon band structure, phonon–phonon scattering rates, and the convergence of electron valence band edges, which could provide guidelines for developing high-performance thermoelectric materials.

Alloying↗

Reconstruction of the BNB and NuMI Neutrino Bunch Structure with ICARUS

ICARUS serves as the Far Detector of the Short Baseline Neutrino (SBN) program at Fermilab, sitting on-axis on the Booster Neutrino Beam (BNB) and 6$^\circ$ off-axis from the Neutrinos at the Main Injector (NuMI) beam. Neutrinos from both beams inherit the timing sub-structure of their parent proton spills, which is in turn derived from either the Booster's or the Main Injector's synchrotron acceleration. Since neutrino propagation introduces only a constant offset, their timing structure is preserved as they travel. Identifying this structure in data represents a powerful tool for selecting neutrino events and searching for physics beyond the Standard Model (BSM). This poster presents the preliminary reconstruction of the BNB and NuMI neutrino bunch structure with ICARUS data, exploiting only the precise timing of ICARUS optical readout system to both locate and assign a time to each interaction.

43 PARTICLE ACCELERATORS↗

Reconstruction of the BNB and NuMI Neutrino Bunch Structure with ICARUS

ICARUS serves as the Far Detector of the Short Baseline Neutrino (SBN) program at Fermilab, sitting on-axis on the Booster Neutrino Beam (BNB) and 6$^\circ$ off-axis from the Neutrinos at the Main Injector (NuMI) beam. Neutrinos from both beams inherit the timing sub-structure of their parent proton spills, which is in turn derived from either the Booster's or the Main Injector's synchrotron acceleration. Since neutrino propagation introduces only a constant offset, their timing structure is preserved as they travel. Identifying this structure in data represents a powerful tool for selecting neutrino events and searching for physics beyond the Standard Model (BSM). This poster presents the preliminary reconstruction of the BNB and NuMI neutrino bunch structure with ICARUS data, exploiting only the precise timing of ICARUS optical readout system to both locate and assign a time to each interaction.

43 PARTICLE ACCELERATORS↗

VLBI Data Processing on Coronal Radio-sounding Experiments of Mars Express

The ESA’s Mars Express solar corona experiments were performed at two solar conjunctions in the years 2015 and 2017 by a number of radio telescopes in the European VLBI Network. This paper presents the methods to measure the frequency and phase fluctuations of the spacecraft radio signal, and the applications to study the characteristics of the plasma turbulence effects on the signal at a single station and at multiple stations via cross correlation. The power spectra of the frequency fluctuations observed between 4.9 and 76.3 R {sub s} have a power-law shape close to a Kolmogorov spectrum over the frequency interval ν {sub lo} < ν < ν {sub up}, where the nominal value of ν {sub lo} is set to 3 mHz and ν {sub up} is in the range of 0.03–0.15 Hz. The rms of the frequency fluctuations is presented as a function of the heliocentric distance. Furthermore, we analyze the variations of the electron column density fluctuations at solar offsets 4.9 R {sub s} and 9.9 R {sub s} and the cross-correlation products between the VLBI stations. The power density of the differential fluctuations between different stations decreases at ν < 0.01 Hz. Finally, the fast flow speeds of solar wind >700 km s{sup -1} are derived from the cross correlation of frequency fluctuations at ν < 0.01 Hz. The fast flow speeds of solar wind correspond to the high heliolatitude of the coronal region that the radio rays passed. The VLBI observations and analysis methods can be used to study the electron column density fluctuations and the turbulence at multiple spatial points in the inner solar wind by providing multiple lines of sight between the Earth and the spacecraft.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coupled loads analysis of a novel shared-mooring floating wind farm

Shared mooring lines are a method to reduce the stationkeeping cost of floating offshore wind farms; however, their impacts on floating array dynamics are not yet well understood. Here this article presents advancements to floating wind farm simulation capabilities that allow the dynamic modeling of shared-mooring floating wind arrays - specifically, platform coupling through shared lines and proper phasing of wave loads across the array. These capabilities are demonstrated on a 10-turbine shared-mooring array featuring two staggered rows of wind turbines. A baseline array design with individually moored turbines is used as a basis for comparison. Coupled analysis using FAST.Farm shows that the shared-mooring design has smaller fluctuations in surge when compared to the baseline design. The mean and maximum platform offsets are highest in normal operating conditions, but the maximum mooring line tensions are highest in 50-year storm conditions. Power spectral density analysis of platform surge and sway motions shows that the shared mooring configuration does not introduce any significant inter-platform resonances. The tower-base bending moment statistics and the line tension damage equivalent loads indicate no consequential differences in turbine loading or mooring fatigue life. Anchor load analysis shows that the total required anchor capacity for the shared-mooring array is decreased by approximately 25% when shared anchors are used. Dynamic simulations of the shared mooring system under line failures show that remaining line tensions stay within bounds and that offsets are significantly smaller when compared to the baseline design. Overall, the results show that shared moorings do not introduce any dynamic response concerns in this floating wind array design.

17 WIND ENERGY↗

REMOVING COOL CORES AND CENTRAL METALLICITY PEAKS IN GALAXY CLUSTERS WITH POWERFUL ACTIVE GALACTIC NUCLEUS OUTBURSTS

Recent X-ray observations of galaxy clusters suggest that cluster populations are bimodally distributed according to central gas entropy and are separated into two distinct classes: cool core (CC) and non-cool core (NCC) clusters. While it is widely accepted that active galactic nucleus (AGN) feedback plays a key role in offsetting radiative losses and maintaining many clusters in the CC state, the origin of NCC clusters is much less clear. At the same time, a handful of extremely powerful AGN outbursts have recently been detected in clusters, with a total energy {approx}10{sup 61}-10{sup 62} erg. Using two-dimensional hydrodynamic simulations, we show that if a large fraction of this energy is deposited near the centers of CC clusters, which is likely common due to dense cores, these AGN outbursts can completely remove CCs, transforming them to NCC clusters. Our model also has interesting implications for cluster abundance profiles, which usually show a central peak in CC systems. Our calculations indicate that during the CC to NCC transformation, AGN outbursts efficiently mix metals in cluster central regions and may even remove central abundance peaks if they are not broad enough. For CC clusters with broad central abundance peaks, AGN outbursts decrease peak abundances, but cannot effectively destroy the peaks. Our model may simultaneously explain the contradictory (possibly bimodal) results of abundance profiles in NCC clusters, some of which are nearly flat, while others have strong central peaks similar to those in CC clusters. A statistical analysis of the sizes of central abundance peaks and their redshift evolution may shed interesting insights on the origin of both types of NCC clusters and the evolution history of thermodynamics and AGN activity in clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

BeppoSAX OBSERVATIONS OF THE X-RAY PULSAR MAXI J1409-619 IN LOW STATE: DISCOVERY OF CYCLOTRON RESONANCE FEATURES

The transient 500 s X-ray pulsar MAXI J1409-619 was discovered by the slit cameras aboard Monitor of All-sky X-ray Image (MAXI) on 2010 October 17, and soon after accurately localized by Swift. We found that the source position was serendipitously observed in 2000 during BeppoSAX observations of the Galactic plane. Two sources are clearly detected in the Medium-Energy Concentrator Spectrometer (MECS): one is consistent with the position of IGR J14043-6148 and the other one with that of MAXI J1409-619. We report on the analysis of this archival BeppoSAX/MECS observation integrated with newly analyzed observation from ASCA and a set of high-energy observations obtained from the offset fields of the BeppoSAX/PDS instrument. For the ON-source observation, the 1.8-100 keV spectrum is fit by an absorbed power law with a photon index {Gamma} = 0.87{sup +0.29}{sub -0.19}, corresponding to 2-10 and 15-100 keV unabsorbed fluxes of 2.7 Multiplication-Sign 10{sup -12} and 4 Multiplication-Sign 10{sup -11} erg cm{sup -2} s{sup -1}, respectively, and a 2-10 keV luminosity of 7 Multiplication-Sign 10{sup 34} erg s{sup -1} for a 15 kpc distance. For a PDS offset field observation, performed about one year later and showing a 15-100 keV flux of 7 Multiplication-Sign 10{sup -11} erg cm{sup -2} s{sup -1}, we clearly pinpoint three spectral absorption features at 44, 73, and 128 keV, resolved both in the spectral fit and in the Crab ratio. We interpret these not harmonically spaced features as due to cyclotron resonances. The fundamental energy of 44 {+-} 3 keV corresponds to a magnetic field strength at the neutron star surface of 3.8 Multiplication-Sign 10{sup 12}(1 + z) G, where z is the gravitational redshift. We discuss the nature of the source in the light of its possible counterpart.

79 ASTRONOMY AND ASTROPHYSICS↗

Momentum power spectrum of SDSS galaxies by massE cosmic ruler: 2.1×improvement in measure of growth rate

ABSTRACT Peculiar motion of galaxies probes the structure growth in the universe. In this study, we employ the galaxy stellar mass-binding energy (massE) relation with only two nuisance parameters to build the largest peculiar-velocity (PV) catalogue to date, consisting of 229 890 ellipticals from the main galaxy sample (MGS) of the Sloan Digital Sky Survey (SDSS). We quantify the distribution of the massE-based distances in individual narrow redshift bins (dz = 0.005), and then estimate the PV of each galaxy based on its offset from the Gaussian mean of the distribution. As demonstrated with the Uchuu-SDSS mock data, the derived PV and momentum power spectra are insensitive to accurate calibration of the massE relation itself, enabling measurements out to a redshift of 0.2, well beyond the current limit of z = 0.1 using other galaxy scaling laws. We then measure the momentum power spectrum and demonstrate that it remains almost unchanged if varying significantly the redshift bin size within which the distance is measured, as well as the intercept and slope of the massE relation, respectively. By fitting the spectra using the perturbation theory model with four free parameters, fσ8 is constrained to fσ8 = 0.459$^{+0.068}_{-0.069}$ over Δz = 0.02–0.2, 0.416$^{+0.074}_{-0.076}$ over Δz = 0.02–0.1, and 0.526$^{+0.133}_{-0.148}$ over Δz = 0.1–0.2. The error of fσ8 is 2.1 times smaller than that by the redshift space distortion (RSD) of the same sample. A Fisher matrix forecast illustrates that the constraint on fσ8 from the massE-based PV can potentially exceed that from the stage-IV RSD in late universe (z<0.5).

Shi, Yong (ORCID:0000000286146275)↗

Time-Frequency Warped Waveforms for Well-Contained Massive Machine Type Communications

Herein this paper proposes a novel time-frequency warped waveform for short symbols, massive machine-type communication (mMTC), and internet of things (IoT) applications. The waveform is composed of asymmetric raised cosine (RC) pulses to increase the signal containment in time and frequency domains. The waveform has low power tails in the time domain, hence better performance in the presence of delay spread and time offsets. The time-axis warping unitary transform is applied to control the waveform occupancy in time-frequency space and to compensate for the usage of high roll-off factor pulses at the symbol edges. The paper explains a step-by-step analysis for determining the roll-off factors profile and the warping functions. Gains are presented over the conventional Zero-tail Discrete Fourier Transform-spread-Orthogonal Frequency Division Multiplexing (ZT-DFT-s-OFDM), and Cyclic prefix (CP) DFT-s-OFDM schemes in the simulations section.

42 ENGINEERING↗

Characterization of ultrasound elevation beamwidth artifacts for prostate brachytherapy needle insertion

Purpose: Ultrasound elevation beamwidth leads to image artifacts and uncertainties in localizing objects (such as a surgical needle) in ultrasound images. The authors examined the clinical significance of errors caused by elevation beamwidth artifacts and imaging parameters in needle insertion procedures. Methods: Beveled prostate brachytherapy needles were inserted through all holes of a grid template under real-time transrectal ultrasound (TRUS) guidance. The needle tip position as indicated by the TRUS image was compared to their observed physical location. A new device was developed to measure the ultrasound elevation beamwidth. Results: Imaging parameters of the TRUS scanner have direct impact on the localization error ranging from 0.5 up to 4 mm. The smallest localization error was observed laterally close to the center of the grid template and axially within the beam's focal zone. Largest localization error occurs laterally around both sides of the grid template and axially within the beam's far field. The authors also found that the localization errors vary with both lateral and elevation offsets. Conclusions: The authors found properly adjusting the TRUS imaging settings to lower the ultrasound gain and power effectively minimized the appearance of elevation beamwidth artifacts and in turn reduced the localization errors of the needle tip.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Protect and Restore the Upper Lochsa : Annual Progress Report, May 2008 – April 2009.

The Upper Lochsa watersheds included in the project contain critical spawning and rearing habitat for anadromous and resident fish (Clearwater National Forest 1999). Species that depend on the tributary habitat include spring chinook salmon (Oncorhynchus tshawytscha), Snake River summer steelhead (Oncorhynchus mykiss), bull trout (Salvelinus confluentes), and westslope cutthroat trout (Oncorhynchus clarki lewisi). Steelhead and bull trout populations are currently listed as Threatened under the Endangered Species Act (ESA), and westslope cutthroat trout has been petitioned for listing. Both out-of-basin and in-basin factors threaten fish populations in the Lochsa Drainage (Clearwater Subbasin Plan 2003). Out-of-basin factors include the hydroelectric system and ocean conditions, while in-basin factors include a variety of management activities leading to habitat degradation. This project is implemented under Bonneville Power Administration's Fish and Wildlife program in order to meet National Marine Fisheries Service requirements to offset losses caused by the operation of the hydrosystem by improving tributary habitats to promote increased productivity of salmon and steelhead. The Clearwater Subbasin Plan (2003) defines limiting factors to fisheries in the area as watershed disturbances, habitat degradation, sediment, temperature, and connectivity.

13 HYDRO ENERGY↗