Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum interference devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Experimental studies and micromagnetic simulations of electrodeposited Co nanotube arrays

Magnetic hollow nanotubes of cobalt forming close-packed arrays are synthesized by controlling the growth during electrodeposition in AAO template. Superconducting quantum interference device (SQUID) magnetometry is used to experimentally measure the static magnetization of the array of nanotubes. Excellent qualitative agreements of SQUID and micromagnetic simulations for static measurements are observed. This motivates us to evaluate dynamic response measurements via micromagnetic simulations. The coercivity simulated along the longitudinal axis of the nanotube is found increase with the length of isolated as well as for array of nanotubes. The effect of interactions is also clearly observed both in static as well as in dynamic evaluations. The interactions cause reduction in coercivity along with the switching which depends upon the length of the nanotubes. The calculation for FMR modes also indicates that propagation of the spin waves are greatly influenced by the hollow centre of nanotube as compare to nanowire and support to maintain the stable vortex configuration. For array of nanotubes, multiple peaks are found over larger number of frequencies which is anticipated due the interactions between nanotubes. Simulation for bias field and angular dependence of spin wave modes also yields a significant influenced by the presence of neighbouring nanotubes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamical cancellation of pulse-induced transients in a metallic shielded room for ultra-low-field magnetic resonance imaging

Pulse-induced transients such as eddy currents can cause problems in measurement techniques where a signal is acquired after an applied preparatory pulse. In ultra-low-field magnetic resonance imaging, performed in magnetic fields typically of the order of 100 μT, the signal-to-noise ratio is enhanced in part by prepolarizing the proton spins with a pulse of much larger magnetic field and in part by detecting the signal with a Superconducting QUantum Interference Device (SQUID). The pulse turn-off, however, can induce large eddy currents in the shielded room, producing an inhomogeneous magnetic-field transient that both seriously distorts the spin dynamics and exceeds the range of the SQUID readout. It is essential to reduce this transient substantially before image acquisition. We introduce dynamical cancellation (DynaCan), a technique in which a precisely designed current waveform is applied to a separate coil during the later part and turn off of the polarizing pulse. This waveform, which bears no resemblance to the polarizing pulse, is designed to drive the eddy currents to zero at the precise moment that the polarizing field becomes zero. We present the theory used to optimize the waveform using a detailed computational model with corrections from measured magnetic-field transients. SQUID-based measurements with DynaCan demonstrate a cancellation of 99%. Dynamical cancellation has the great advantage that, for a given system, the cancellation accuracy can be optimized in software. This technique can be applied to both metal and high-permeability alloy shielded rooms, and even to transients other than eddy currents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous magnetic noise in an imperfectly flat landscape in the topological magnet Dy 2 Ti 2 O 7

Noise generated by motion of charge and spin provides a unique window into materials at the atomic scale. From temperature of resistors to electrons breaking into fractional quasiparticles, “listening” to the noise spectrum is a powerful way to decode underlying dynamics. Here, we use ultrasensitive superconducting quantum interference device (SQUIDs) to probe the puzzling noise in a frustrated magnet, the spin-ice compound Dy 2 Ti 2 O 7 (DTO), revealing cooperative and memory effects. DTO is a topological magnet in three dimensions—characterized by emergent magnetostatics and telltale fractionalized magnetic monopole quasiparticles—whose real-time dynamical properties have been an enigma from the very beginning. We show that DTO exhibits highly anomalous noise spectra, differing significantly from the expected Brownian noise of monopole random walks, in three qualitatively different regimes: equilibrium spin ice, a “frozen” regime extending to ultralow temperatures, and a high-temperature “anomalous” paramagnet. We present several distinct mechanisms that give rise to varied colored noise spectra. In addition, we identify the structure of the local spin-flip dynamics as a crucial ingredient for any modeling. Thus, the dynamics of spin ice reflects the interplay of local dynamics with emergent topological degrees of freedom and a frustration-generated imperfectly flat energy landscape, and as such, it points to intriguing cooperative and memory effects for a broad class of magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flux-coherent series SQUID array magnetometers operating above 77 K with superior white flux noise than single-SQUIDs at 4.2 K

A very promising direction to improve the sensitivity of magnetometers based on superconducting quantum interference devices (SQUIDs) is to build a series-array of N non-interacting SQUIDs operating flux-coherently, because in this case their voltage modulation depth, ΔV, linearly scales with N whereas the white flux noise S{sub Φ}{sup 1/2} decreases as 1/N{sup 1/2}. Here, we report the realization of both these improvements in an advanced layout of very large SQUID arrays made of YBa{sub 2}Cu{sub 3}O{sub 7}. Specially designed with large area narrow flux focusers for increased field sensitivity and improved flux-coherency, our arrays have extremely low values for S{sub Φ}{sup 1/2} between (0.25 and 0.44) μΦ{sub 0}/Hz{sup 1/2} for temperatures in the range (77–83) K. In this respect, they outperform niobium/aluminium trilayer technology-based single-SQUIDs operating at 4.2 K. Moreover, with values for ΔV and transimpedance in the range of (10–17) mV and (0.3–2.5) kΩ, respectively, a direct connection to a low-noise room temperature amplifier is allowed, while matching for such readout is simplified and the available bandwidth is greatly increased. These landmark performances suggest such series SQUID arrays are ideal candidates to replace single-SQUIDs operating at 4.2 K in many applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of Vortex Stripes in UTe 2

In conventional type-II superconductors, quantum vortices determine the magnetic response of the system and tend to form regular lattices. UTe 2 is a recently discovered heavy Fermion superconductor exhibiting many anomalous macroscopic behaviors, but whether it has a multicomponent order parameter remains open. Here, in this work, we study the vortices of UTe 2 by employing scanning superconducting quantum interference device microscopy. While a small out-of-plane magnetic field produces typical isolated vortices, a higher field generates vortex stripe patterns that evolve with the vortex density. The stripes form at different locations and along different directions in the surface plane when the field is along the b or c axis. The behavior is reproduced by our simulation based on an anisotropic two-component order parameter. This study shows that UTe 2 has a nontrivial disparity of multiple length scales, placing constraints on the multicomponent superconductivity.

UTe2↗

Magnetism of Co doped ZnO with Al codoping: Carrier-induced mechanisms versus extrinsic origins

Dilute magnetic semiconductors (DMS) which exhibit ferromagnetism (FM) at and above room temperature are a highly desirable class of materials for future spin- tronics devices. Zn 1-x Co x O (Co:ZnO) is a heavily studied DMS material in this context. Although controversially discussed in the literature, there is a growing con- sensus, that phase-pure Co:ZnO is paramagnetic (PM)[1–3]. Altering the preparation conditions can easily lead to phase separation and consequently superparam- agnetism (SPM) [3]. Nonetheless there are recent experimental data claiming that FM can be switched on inCo:ZnO by controlling the carrier concentration [4]. On the other hand, no FM was found in structurally excellent Al-codoped Co:ZnO [5]. However, in the latter work the magnetic characterization was restricted to room temperature measurements. In parallel, theory has also revealed that defect-free, insulating Co:ZnO is not ferromagnetic [6, 7] whereas the role of n-type carriers remains under debate, ranging from ferromagnetic coupling [8], or oscil- latory behavior with Co-Co distance [9] to antiferromagnetic coupling [10]. It is rather common to manipulate the n-type carrier concentration of ZnO by Al-doping to yield high conductivity [4, 11]. On the other hand, it had been shown that Al-codoping of Co:ZnO may promote the onset of phase separation [11]. It is extremely difficult to detect such secondary Co-containing phases even with the most careful x-ray diffraction (XRD) analysis [11, 12] or depth-profiling photoelectron spectroscopy (DP-XPS) [13]. Such careful materials characterization is lacking in Ref. [4]. An alternative to extensive XRD or DP-XPS to look for potential phase separation in Co:ZnO is the combination of x-ray absorption near edge spectra (XANES), x-ray linear dichroism (XLD), and x-ray magnetic circular dichroism (XMCD). This suite of atom-specific x-ray spectroscopies nicely complements integral superconducting quantum interference device (SQUID) magnetometry. For example, combined XLD simulations and experiments at the Co K-edge have been used to verify the phase purity of Co:ZnO [2] and characteristic spectroscopic signatures with appropriate quality thresholds for PM and SPM have been identified recently in the XANES and XMCD at the Co K-edge of Co:ZnO [3]. Along the same line, a careful combination of XANES and extended x-ray absorption fine structure (EXAFS) was employed to study Co:ZnO films similar to those in [4] which found evidence for Co(0) secondary phases [14].

42 ENGINEERING↗

Evolution of N-Coordinated Iron–Carbon (FeNC) Catalysts and Their Oxygen Reduction (ORR) Performance in Acidic Media at Various Stages of Catalyst Synthesis: An Attempt at Benchmarking

The objective of this study was to understand the role of iron and the heat treatment steps involved in nitrogen-coordinated iron-carbon (FeNC) catalyst synthesis. We have studied the oxygen reduction reaction (ORR) performance of these catalysts as they evolve from their most crude and inactive form to their most active form. Electrochemical half-cell and fuel cell tests suggest that the presence of Fe was crucial in these samples. The high-temperature heat treatment (once in argon and then in ammonia) at temperatures ≥950 °C were also critical in imparting these catalysts with their highest activity; however, significant loss of activity was observed with cycling and potential hold at 0.5 V for 100 h. In addition, acid-washing after the first or the second pyrolysis steps produced a marked decrease in ORR activity relative to their unwashed counterparts. We also report findings from our efforts towards benchmarking FeNC catalysts for oxygen reduction reaction electrocatalysis. Specifically, we focus on correlating the specific kinetic current (iK) at 0.75 V to electrochemically accessible surface area (EASA) and roughness factor (RF) determined from electrochemical double layer capacitance measurements. 57 Fe Mössbauer spectroscopy was employed to shed light into the nature of active sites in FeNC catalysts and provide insights into their deactivation behavior caused by acid-washing. The results suggest planar FeN 4 doublet (Fe 2+ , low spin) as an active site in these materials, which may be leached away in acid, explaining their decreased activity after acid washing. Results for characterization experiments using X-ray photoelectron spectroscopy, temperature programmed oxidation and X-ray absorption spectroscopy, superconducting quantum interference device magnetometry are also presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Pulse Tube Cryocoolers at SITP for Space Application

Over the last 10 years, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, has developed very high-efficiency pulse tube cryocoolers (PTCs) for aerospace applications. These PTCs can provide cooling power from milliwatt scale to tens of watts over a range of temperatures from 30 to 170 K and can be used to cool a variety of detectors in space applications (such as quantum interference devices, radiometers and ocean color sensors) that must operate at a specific cryogenic temperature to increase the signal-to-noise ratio, sensitivity and optical resolution. This paper reviews the development of single-stage PTCs over a range of weights from 1.6 to 12 kg that offer cooling powers at the cold temperature range from 40 to 170 K. In addition, a two-stage 30 K-PTC is under development.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The LiteBIRD Satellite Mission: Sub-Kelvin Instrument

Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through “B-mode” (divergent-free) polarization pattern embedded in the cosmic microwave background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The US LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40–235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280–402 GHz) with three types of single frequency detectors. The detectors will be made with transition edge sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator. The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplifier. Lastly, we report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.

79 ASTRONOMY AND ASTROPHYSICS↗

Developing AlMn Films for Argonne TES Fabrication

The reference design for the next-generation cosmic microwave background (CMB) experiment, CMB-S4, relies on large arrays of transition-edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. Mapping the CMB to near cosmic variance limits will enable the search for signatures of inflation and constrain dark energy and neutrino physics. AlMn TESes provide simple film manufacturing and highly uniform arrays over large areas to meet the requirements of the CMB-S 4 experiment. TES parameters such as critical temperature and normal resistance must be tuned to experiment specifications and can be varied based on geometry and steps in the fabrication process such as deposition layering, geometry, and baking time and temperature. Using four-terminal sensing, we measured T C and R N of AlMn 2000 ppm films and devices of varying thicknesses fabricated at Argonne National Laboratory to motivate device geometries and fabrication processes to tune T C to 150–200 mK and R N to ~10 mΩ. Furthermore, measurements of IV curves and time constants for the resulting devices of varying leg length were made using time-division SQUID multiplexing and determined TC, G, k, f 3db , and RN. We present the results of these tests along with the geometries and fabrication steps used to tune the device parameters to the desired limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave Multiplexing on the Keck Array

In this paper, we describe an on-sky demonstration of a microwave-multiplexing readout system in one of the receivers of the Keck Array, a polarimetry experiment observing the cosmic microwave background at the South Pole. During the austral summer of 2018–2019, we replaced the time-division multiplexing readout system with microwave-multiplexing components including superconducting microwave resonators coupled to radio frequency superconducting quantum interference devices at the sub-Kelvin focal plane, coaxial-cable plumbing and amplification between room temperature and the cold stages, and a SLAC Microresonator Radio Frequency system for the warm electronics. In the range 5–6 GHz, a single coaxial cable reads out 528 channels. The readout system is coupled to transition-edge sensors, which are in turn coupled to 150-GHz slot-dipole phased-array antennas. Observations began in April 2019, and we report here on an initial characterization of the system performance.

79 ASTRONOMY AND ASTROPHYSICS↗

Low Noise Frequency-Domain Multiplexing of TES Bolometers Using SQUIDs at Sub-Kelvin Temperature

Digital Frequency-Domain Multiplexing (DfMux) is a technique that uses MHz superconducting resonators and Superconducting Quantum Interference Device (SQUID) arrays to read out sets of transition edge sensors. DfMux has been used by several Cosmic Microwave Background experiments, including most recently POLARBEAR-2 and SPT-3 G with multiplexing factors as high as 68, and is the baseline readout technology for the planned satellite mission LiteBIRD. Here, we present recent work focused on improving DfMux readout noise, reducing parasitic impedance, and improving sensor operation. We have achieved a substantial reduction in stray impedance by integrating the sensors, resonators, and SQUID array onto a single-carrier board operated at 250 mK. This also drastically simplifies the packaging of the cryogenic components and leads to better-controlled crosstalk. We demonstrate a low readout noise level of 8.6 pA/Hz1 1/2 , which was made possible by operating the SQUID array at a reduced temperature and with a low dynamic impedance. This is a factor of two improvement compared to the achieved readout noise level in currently operating Cosmic Microwave Background experiments using DfMux and represents a critical step toward maturation of the technology for the next generation of instruments.

47 OTHER INSTRUMENTATION↗

BICEP Array: 150 GHz Detector Module Development

The Background Imaging of Cosmic Extragalactic Polarization (BICEP)/Keck (BK) collaboration is currently leading the quest for the highest-sensitivity measurements of the polarized cosmic microwave background (CMB) anisotropies on a degree scale with a series of cryogenic telescopes, of which BICEP Array (BA) is the latest Stage-3 upgrade with a total of ~ 32,000 detectors. The instrument comprises 4 receivers spanning 30–270 GHz, with the low-frequency 30/40 GHz deployed to the South Pole Station in late 2019. The full complement of receivers is forecast to set the most stringent constraints on the tensor-to-scalar ratio r. Building on these advances, the overarching small-aperture telescope concept is already being used as the reference for further Stage-4 experiment design. This paper describes the development of the BICEP Array 150 GHz detector module and its fabrication requirements, with highlights on the high-density time division multiplexing (TDM) design of the cryogenic circuit boards. The low-impedance wiring required between the detectors and the frst stage of superconducting quantum interference device amplifers is crucial to maintaining a stable bias current on the detectors. Here, a novel multilayer FR4 Printed Circuit Board with superconducting traces, capable of reading out up to 648 detectors, is detailed along with its validation tests. An ultra-high-density TDM detector module concept we developed for a CMB-S4-like experiment that allows up to 1920 detectors to be read out is also presented. TDM has been chosen as the detector readout technology for the Cosmic Microwave Background Stage-4 (CMB-S4) experiment based on its proven low-noise performance, predictable costs, and overall maturity of the architecture. The heritage for TDM is rooted in mm- and sub-mm-wave experiments dating back 20 years and has since evolved to support a multiplexing factor of 64x in Stage-3 experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Tunable Synthesis of Hierarchical Superparamagnetic Fe{sub 3}O{sub 4} Nanospheres by a Surfactant-Free Solvothermal Method

Hierarchical Fe{sub 3}O{sub 4} nanospheres with superparamagnetism have been fabricated via a solvothermal method without any surfactants. The effect of reaction parameters like the types of the reagent, the reaction time, and the reagent concentration on the morphology and structure of the resultant samples are investigated. In this method, ferric chloride (FeCl{sub 3} ⋅ 6H{sub 2}O) is used as the iron source, and EG acts as both solvent and reducing agent. The presence of NaHCO{sub 3} or Na{sub 2}CO{sub 3} provides alkine condition and gaseous bubbles in the control over the size of Fe{sub 3}O{sub 4} nanospheres. The formation mechanism for Fe{sub 3}O{sub 4} nanospheres is illustrated by an Ostwald ripening process. The Fe{sub 3}O{sub 4} nanospheres were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and superconducting quantum interference device magnetometer (SQUID-VSM). The Fe{sub 3}O{sub 4} nanospheres exhibited a wider size distribution at the amount of 0.397 mol/L NaHCO{sub 3}, showing a high saturation magnetization close to 84.46 emu/g. The Fe{sub 3}O{sub 4} nanospheres soluble in deionized water is also investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Structural Properties of Novel Neodymium-Tin Spinel Ferrite Nanoparticles

Novel spinel neodymium-tin ferrite nanoparticles (Nd{sub 0.5}Sn{sub 0.5}Fe{sub 2}O{sub 4}) have been synthesized by the coprecipitation method; x-ray diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference device magnetometer (SQUID) techniques were used to characterize the crystal structure, morphology, and magnetic properties. The spinel structure of a single phase is obtained according to XRD results. From TEM characterization results, we obtained a spherical morphology with an average of 13 nm. Magnetic measurement indicates that the nanoparticles have a superparamagnetic phase with a corresponding blocking temperature (T{sub B}) of about 360 K. These new nanomaterials can potentially be used in nanoelectronic devices, magnetic sensors, and hyperthermia application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ce-Doping and Reduction Annealing Effects on Magnetic Properties of Pr{sub 2-x}Ce{sub x}CuO{sub 4} Nanoparticles

Magnetic properties of reduced T’-Pr{sub 2-x}Ce{sub x}CuO{sub 4} (T’-PCCO) nanoparticles with x = 0, 0.10, and 0.15 have been investigated. The T’-PCCO samples were synthesized by the chemically dissolved method with HNO{sub 3} as dissolving agents and by the succeeding calcination at 1000 °C for 15 h in air. The reduced T’-PCCO samples were obtained by the reduction annealing at 700 °C for 10 h in Argon atmosphere and at 700 °C for 12 h in vacuum. Rietveld analyses of the X-ray diffraction (XRD) patterns for all the samples have revealed dependences of the c-axis length and the crystal size on the Ce doping and the reduction annealing. XRD analyses and transmission electron microscopy (TEM) images have confirmed T’-PCCO nanoparticles with the size of around 40–100 nm. Magnetic properties of all the T’-PCCO nanoparticles were studied by a superconducting quantum interference device (SQUID) showing a dominant paramagnetic feature with very weak ferromagnetism in the as-synthesized samples at room temperature. It has changed to a pure paramagnetic feature after the reduction annealing in argon atmosphere and an enhanced ferromagnetism through vacuum annealing. This is probably due to the change in the number of oxygen vacancies through the defect recovery and the removal of excess oxygen after both reduction annealing processes, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetism and Conductivity Along Structural Domain Walls of SrTiO3

Abstract The interface between the oxide insulators LaAlO 3 and SrTiO 3 (LAO/STO) hosts a two-dimensional electron gas. The combination of interfacial conductivity and superconductivity at ultra-low temperatures with the physical phenomena of the oxide parent materials has fueled extensive research in the field since its discovery in 2004. Scanning superconducting quantum interference device (SQUID) measurements have shown that structural domain walls, formed below 105 K, modulate the current flow at the interface and recently revealed weak magnetic signals along the same domain structure. Here we use scanning SQUID to investigate the temperature dependence of different electronic properties of the LAO/STO interface. We find correlation between magnetism and conductivity, which are both spatially modulated on the domain structure. This data suggests a possible relation between the populations of electrons participating in each order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of the Superconducting Properties of GdBa{sub 2}Cu{sub 3}O{sub 7-δ} with Nano-Sized Ferrite Addition

We have been investigating the effect of (CoFe{sub 2}O{sub 4}){sub x} and (ZnFe{sub 2}O{sub 4}){sub x} (x is the wt%) nano-sized ferrites on the superconducting (SC) properties of the high-T{sub c} SC compound GdBa{sub 2}Cu{sub 3}O{sub 7-δ} (Gd123) prepared by the conventional solid-state reaction technique. In this work, the magnetic hysteresis for pure Gd123 samples and samples added with nano-sized ferrites was measured using a superconducting quantum interference device (SQUID) magnetometer using a dc field up to 30,000 Oe. The magnetic J{sub c} was estimated using the extended Bean model. While a clear increase in J{sub c} values with the addition of (CoFe{sub 2}O{sub 4}){sub x} nano-sized ferrites is observed, a less clear positive effect on the J{sub c} values is observed with the addition of (ZnFe{sub 2}O{sub 4}){sub x} nano-sized ferrites. These results indicate an improvement of grain connectivity, decrease of voids between the grains, and decrease of porosity in Gd123 compound resulting from CoFe{sub 2}O{sub 4} addition consistent with the mechanical properties measured before. (CoFe{sub 2}O{sub 4}){sub x} nano-sized ferrite addition has thus resulted in an improvement in the SC properties of Gd123 high-T{sub c} SC compound making it more convenient for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗