Search NASA⌕ Search

SEARCH · Search NASA

Results for “R value”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Enhanced magnetism and ferroelectricity in epitaxial Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}/CoFe{sub 2}O{sub 4}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} multiferroic heterostructures grown using dual-laser ablation technique

PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}/CoFe{sub 2}O{sub 4}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (PZT/CFO/LSMO) and PZT/LSMO heterostructures were grown on single-crystal MgO (100) substrates using the dual-laser ablation technique. X-ray diffraction confirmed the epitaxial relationship between the layers in the heterostructures. Magnetization measurements showed in-plane uniaxial magnetic anisotropy in PZT/CFO/LSMO with enhanced saturation magnetization of 288 emu/cm{sup 3} as compared to 244 emu/cm{sup 3} for PZT/LSMO. With the introduction of the hard magnetic CFO, the low coercivity of PZT/LSMO increased from 0.1 kOe to 1.4 kOe. Polarization measurements showed well-saturated square hysteresis loops for PZT/CFO/LSMO with enhanced remanent polarization (P{sub r}) values of 69 μC/cm{sup 2} at a coercive field (E{sub c}) of 88 kV/cm as compared to P{sub r} = 51 μC/cm{sup 2} at E{sub c} = 39 kV/cm for PZT/LSMO. The improved hard ferromagnetic and ferroelectric properties in PZT/CFO/LSMO as compared to PZT/LSMO make it desirable for multiferroic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dependence on pressure of the refractive indices of wurtzite ZnO, GaN, and AlN

We have measured both the ordinary and extraordinary refractive index of m-plane cuts of wurtzite ZnO, GaN, and AlN single crystals at room temperature and as a function of hydrostatic pressure up to 8 GPa. For that purpose we have developed an alternative optical interference method, called bisected-beam method, which leads, in general, to high contrast interference fringes. Its main feature, however, is to be particularly suitable for high pressure experiments with the diamond anvil cell, when the refractive index of the sample is low and similar to that of diamond and/or the pressure transmitting medium, as is the case here. For all three wide-gap materials we observe a monotonous decrease of the ordinary and extraordinary refractive indices with increasing pressure, being most pronounced for GaN, less marked for ZnO, and the smallest for AlN. The frequency dependence of the refractive indices was extrapolated to zero energy using a critical-point-plus-Lorentz-oscillator model of the ordinary and extraordinary dielectric function. In this way, we determined the variation with pressure of the electronic part (no-phonon contribution) of the static dielectric constant epsilon(infinity). Its volume derivative, r = d ln epsilon(infinity)/d ln V, serves as single scaling coefficient for comparison with experimental and/or theoretical results for other semiconductors, regarding the pressure effects on the dielectric properties. We have obtained an ordinary/extraordinary average value (r) over bar of 0.49(15) for ZnO, 1.22(9) for GaN, and 0.32(4) for AlN. With the values for the ordinary and extraordinary case being within experimental uncertainty, there is thus no apparent change in dielectric anisotropy under pressure for these wurtzite semiconductors. Results are discussed in terms of the pressure-dependent electronic band structure of the materials.

Goni, AR↗

Prediction of Mass Spectral Response Factors from Predicted Chemometric Data for Druglike Molecules

A method is developed for the prediction of mass spectral ion counts of drug-like molecules using in silico calculated chemometric data. Various chemometric data, including polar and molecular surface areas, aqueous solvation free energies, and gas-phase and aqueous proton affinities were computed, and a statistically significant relationship between measured mass spectral ion counts and the combination of aqueous proton affinity and total molecular surface area was identified. In particular, through multilinear regression of ion counts on predicted chemometric data, we find that log{sub 10}(MS ion counts) = –4.824 + c{sub 1}•PA + c{sub 2}•SA, where PA is the aqueous proton affinity of the molecule computed at the SMD(aq)/M06-L/MIDI!//M06-L/MIDI! level of electronic structure theory, SA is the total surface area of the molecule in its conjugate base form, and c{sub 1} and c{sub 2} have values of –3.912 × 10{sup –2} mol kcal{sup –1} and 3.682 × 10{sup –3} Å{sup –2}. On a 66-molecule training set, this regression exhibits a multiple R value of 0.791 with p values for the intercept, c{sub 1}, and c{sub 2} of 1.4 × 10{sup –3}, 4.3 × 10{sup –10}, and 2.5 × 10{sup –6}, respectively. Application of this regression to an 11-molecule test set provides a good correlation of prediction with experiment (R = 0.905) albeit with a systematic underestimation of about 0.2 log units. This method may prove useful for semiquantitative analysis of drug metabolites for which MS response factors or authentic standards are not readily available. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Retrieval of stratospheric aerosol size distribution from atmospheric extinction of solar radiation at two wavelengths

A parametric study is presented of the effects of the size distribution and composition of stratospheric aerosols on the value R, the ratio of the extinction of solar radiation at wavelength 0.45 micron to the extinction at wavelength 1.0 micron. The aerosol size distributions under study comprise nine analytical expressions, including most of the stratospheric aerosol models used by investigators. The aerosol compositions considered are the supercooled sulfuric-acid droplets, with different weight percentages of H2SO4 in the aerosol. It is found that whereas R is not very sensitive to either the composition or the radii limits of the stratospheric aerosols under consideration, it is quite sensitive to the value of the variable parameter governing the mode radius of the size distribution of aerosol particles. The results of the parametric study underlie the method proposed here of retrieving the size distribution of aerosol particles in the stratosphere from the experimental results of the extinction of solar radiation at two wavelengths.

Yue, G. K.↗

Development and Validation of Sensorimotor Assessment Tasks Using Spaceflight Analogs

INTRODUCTION Exploration class missions will require a new level of crew autonomy to self-assess and treat their sensorimotor dysfunction around periods of gravitational transition, where sensorimotor disturbances are at their highest. There is a need to define sensorimotor assessment thresholds that indicate when performance in early extravehicular activities (EVAs) might be impacted or unsafe. The purpose of this study was to develop and validate a set of assessment tasks using sensorimotor spaceflight analogs including the Sensorimotor Disorientation Analog (SDA) and +3G x sustained centrifugation. METHODS For the SDA, forty-one healthy non-astronaut subjects (21 males, 20 females; Mean ± SD, Age: 34.0 ± 7.8 years) volunteered to participate in this study. Subjects attended two testing sessions: 1) familiarization to the tasks and baseline data collection, and 2) tasks completed under two levels of sensorimotor disorientation. Subjects performed a series of seven sensorimotor assessment tasks followed by two operationally relevant EVA analog tasks. The sensorimotor assessments tasks, ordered from least to most provocative of the sensorimotor system, included: postural stability, step test, prone/supine recovery from fall (RFF), four-square-step-test, obstacle negotiation with turns (OTT), kneel-and-reach, and augmented reality full-body coordination. The operational analog tasks included a top-hatch capsule egress and a 5-minute EVA traversal. Disorientation was applied via the SDA which utilized galvanic vestibular stimulation and weighted trunk, wrists, and ankles to target the vestibular and proprioceptive systems such that performance while wearing the SDA mimicked astronaut postflight performance at R+0 and R+1. Sixteen healthy non-astronaut subjects (10 males, 6 females; Age: 35.0 ± 9.5 years) completed +3G x 60-minute sustained centrifugation as an established spaceflight analog replicating the vestibular disruptions seen postflight. Subjects completed a pre-session which included familiarization to the tasks and a 5-minute centrifuge spin. The data collection session included, in order, a baseline data collection, 60-minute centrifuge spin, immediate post-centrifuge data collection, 45-minute seated recovery, and a final data collection. The same assessment and operational analog tasks were conducted as described above. RESULTS Pearsons’ correlation r-values were calculated between assessment and operational analog tasks. The two assessment tasks with the strongest correlations to the operational analog tasks were the RFF (SDA: r≥ 0.57, Centrifuge: r ≥0.55) and OTT (SDA: r≥ 0.66, Centrifuge: r ≥ 0.49). For brevity, repeated measures ANOVA with follow-up paired t-tests are discussed for these two assessment tasks. The SDA found significant differences between all three levels of disorientation for both RFF and OTT (p < 0.001). Significant differences were also found between baseline and immediate post centrifuge testing for both the RFF (p≤ 0.011) and OTT (p = 0.001). Additional results are forthcoming for both disorientation paradigms. DISCUSSION These validation studies provide evidence for down-selection of the assessment tasks that were able to distinguish between levels of sensorimotor disorientation and correlate to performance in operationally relevant tasks for use in upcoming Artemis missions.

S C Moudy↗

Developing Satellite-Assisted Particulate Matter (SAPM) Estimates over India for the MIRA Working Group

The Models, In Situ, and Remote Sensing of Aerosols (MIRA) Working Group is an international collective that encourages collaboration among researchers from these three atmospheric aerosol communities. MIRA currently comprises five interdisciplinary and independently funded Topic Groups, each with specific goals, and involves requests for additional scientific datasets. The Satellite-Assisted Particulate Matter (SAPM) Topic Group, as part of MIRA, focuses on studying particulate matter smaller than 2.5 microns in diameter (PM2.5) due to its significant contribution to air pollution and its harmful effects on human health. While the annual mean PM2.5 levels are typically low (~5-15 μg/m³) across most of the contiguous United States (CONUS), other countries experience much higher concentrations (e.g., India). SAPM aims to compare different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ measurements. Ultimately, SAPM aims to provide more extensive coverage of PM2.5 concentrations than what is currently available from in situ ground stations, which are limited in some parts of the CONUS and large regions worldwide. Current SAPM members are exploring PM2.5 estimation techniques using active sensors. This presentation offers an overview of these techniques and highlights the strengths and limitations of each approach. These techniques include 1) spaceborne lidar (CALIOP: Cloud-Aerosol Lidar with Orthogonal Polarization) alone, and 2) a combination of spaceborne lidar (CATS: Cloud Aerosol Transport System) and a global aerosol transport model (GEOS: Goddard Earth Observing System). Additionally, we present a case study featuring our SAPM research in India, a country with high levels of PM2.5 concentrations (i.e., state-level annual means of ~100-200 μg/m³). Consistent spatial patterns in PM2.5 over India are found from the in situ data, CALIOP-based, and CATS/model-based methods, with the highest concentrations found in northern India near New Delhi. The gridded PM2.5 analysis yields high R values between in situ and CATS/model (~0.7) and between in situ and CALIOP nighttime (~0.9), as well as good agreement between CATS/model and CALIOP nighttime PM2.5 estimates (R = ~0.8 and slope = ~0.9). For current and future efforts, the SAPM Topic Group is actively seeking new collaborators, especially those working with in situ aerosol measurements, and is interested in acquiring additional aerosol datasets to improve and validate the PM2.5 proxies.

Travis D Toth↗

Cr2 Revisited

Abstract Cr2 is studied at the coupled cluster singles and doubles level of theory, including a perturbational estimate of the connected triples [CCSD(T)]. Both spin restricted, RCCSD(T), and spin unrestricted, UCCSD(T), approaches are used. The UCCSD(T) bond length is much longer than the experimental value, while the RCCSD(T) bond length is shorter. This difference is due to the inability of the spin restricted Hartree-Fock reference to describe the antiferromagnetic coupling at larger r values. In contrast with the results obtained using density functional theory in conjunction with older functionals, the results obtained with recently developed functionals are in agreement with the UCCSD(T) results.

Bauschlicher, Charles W., Jr.↗

A Size Effect on the Fatigue Crack Growth Rate Threshold of Alloy 718

Fatigue crack growth rate (FCGR) tests were conducted on Alloy 718 in the solution annealed and aged condition at room temperature. In each test, the FCGR threshold was measured using the decreasing (Delta)K method. Initial testing was at two facilities, one of which used C(T) specimens with W = 127 mm. Previous data at the other facility had been obtained with specimens with W = 50.8 mm. A comparison of test results at R = 0.1 showed that the threshold for the 127 mm specimen was considerably higher than that of the 50.8 mm specimen. A check showed that this difference was not due to a heat-to-heat or lab-to-lab variation. Additional tests were conducted on specimens with W = 25.4 mm and at other R values. Data for the various specimens is presented along with parameters usually used to describe threshold behavior.

Garr, K. R.↗

Development and performance evaluation of active insulation systems using solid-state thermal switches

Traditional building envelopes have passive insulation systems that cannot respond to dynamic changes in the environment. An Active Insulation System (AIS) consists of Active Insulation Materials (AIMs) that dynamically vary the thermal conductivity of the insulation system. Several researchers have evaluated the impact of AIS on building thermal and energy performance by using simulation tools. Up to 70% savings in annual heating and cooling energy and significant reductions in peak demand have been predicted for some climates with wall systems employing AIS. However, materials and assembly development still need a cost-effective product that achieves the required performance. Here, in this study, we present the process of developing an AIS that we will install in a test hut for its performance evaluation. Minimum performance criteria of the AIS system are developed based on R-low/R-high ratio, required time and efficiency to switch states, and cost estimates. The following steps during this study are creating the concept to meet the requirements, predicting the performance via simulations, developing the experimental setup for bench-scale testing, and finally, constructing a full-scale wall assembly and monitoring the performance when exposed to environmental chamber tests. The selected approach uses off-the-shelf products to create an AIS that can switch R-value between 0.98 ft 2 ·°F·h/BTU (0.173 m 2 ·K/W) and 5.81 ft 2 ·°F·h/BTU (1.02 m 2 ·K/W) and have a switching time of less than one minute between R-high and R-low.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The abundance properties of nearby late-type galaxies. II. The relation between abundance distributions and surface brightness profiles

The relations between oxygen abundance and disk surface brightness (OH–SB relation) in the infrared W1 band are examined for nearby late-type galaxies. The oxygen abundances were presented in Paper I. The photometric characteristics of the disks are inferred here using photometric maps from the literature through bulge-disk decomposition. We find evidence that the OH–SB relation is not unique but depends on the galactocentric distance r (taken as a fraction of the optical radius R{sub 25}) and on the properties of a galaxy: the disk scale length h and the morphological T-type. We suggest a general, four-dimensional OH–SB relation with the values r, h, and T as parameters. The parametric OH–SB relation reproduces the observed data better than a simple, one-parameter relation; the deviations resulting when using our parametric relation are smaller by a factor of ∼1.4 than that of the simple relation. The influence of the parameters on the OH–SB relation varies with galactocentric distance. The influence of the T-type on the OH–SB relation is negligible at the centers of galaxies and increases with galactocentric distance. In contrast, the influence of the disk scale length on the OH–SB relation is at a maximum at the centers of galaxies and decreases with galactocentric distance, disappearing at the optical edges of galaxies. Two-dimensional relations can be used to reproduce the observed data at the optical edges of the disks and at the centers of the disks. The disk scale length should be used as a second parameter in the OH–SB relation at the center of the disk while the morphological T-type should be used as a second parameter in the relation at optical edge of the disk. The relations between oxygen abundance and disk surface brightness in the optical B and infrared K bands at the center of the disk and at optical edge of the disk are also considered. The general properties of the abundance–surface brightness relations are similar for the three considered bands B, K, and W1.

79 ASTRONOMY AND ASTROPHYSICS↗

Fast-timing measurements in the ground-state band of Pd 114

Using a hybrid Gammasphere array coupled to 25 LaBr 3 ( Ce ) detectors, the lifetimes of the first three levels of the yrast band in Pd 114 , populated via Cf 252 decay, have been measured. The measured lifetimes are τ 2 + = 103 ( 10 ) ps , τ 4 + = 22 ( 13 ) ps , and τ 6 + ≤ 10 ps for the 2 1 + , 4 1 + , and 6 1 + levels, respectively. Palladium-114 was previously predicted to be the most deformed isotope of its isotopic chain, and spectroscopic studies have suggested it might also be a candidate nucleus for low-spin stable triaxiality. From the lifetimes measured here, reduced transition probabilities B ( E 2 ; J → J - 2 ) are calculated and compared with interacting boson model, projected shell model, and collective model calculations from the literature. The experimental ratio R B ( E 2 ) = B ( E 2 ; 4 1 + → 2 1 + ) / B ( E 2 ; 2 1 + → 0 1 + ) = 0.80 ( 42 ) is measured for the first time in Pd 114 and compared with the known values R B ( E 2 ) in the palladium isotopic chain: the systematics suggest that, for N = 68 , a transition from γ -unstable to a more rigid γ -deformed nuclear shape occurs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Andrieslombaardite, RhSbS, a new platinum-group mineral from the platiniferous Onverwacht Pipe, Republic of South Africa

A hundred years after the discovery of the Merensky Reef in 1924, it is appropriate to present the new mineral andrieslombaardite in honour of Andries Frederik Lombaard who was instrumental in its discovery. Andrieslombaardite, RhSbS, was first described as an unknown mineral from placer deposits associated with the Tulameen Alaskan-Uralian type complex, British Colombia, Canada (Raicevic and Cabri, 1976) but has since been reported from several other deposits including the platiniferous Driekop, Mooihoek, and Onverwacht pipes in the eastern Bushveld Complex, South Africa. The mineral and the name were approved by the Commission on New Minerals Nomenclature and Classification (CNMNC) of the International Mineralogical Association (IMA no. 2022-076) based on data in the co-type samples from Onverwacht and a co-type sample from the Yubdo stream, Birbir River, Ethiopia. Andrieslombaardite in the Onverwacht sample is a single 8 x 20 μm grain attached to laurite in a matrix of altered silicate and Fe-oxyhydroxide minerals. In the Yubdo samples, there are many grains of pale brownish gray andrieslombaardite up to 25 x 55 μm in size, included in Pt-Fe alloys, some associated with erlichmanite, and others attached to bornite and chalcopyrite. The reflectance values (R%) measured in air and in oil at the COM wavelengths are 48.3 and 33.0 (470 nm), 49.3 and 34.0 (546 nm), 51.0 and 35.9 (589 nm), and 51.8 and 36.7 (650 nm). The colour values x, y, Y, λd, and Pe in air are 0.317, 0.322, 50.3, 580, and 3.2, and in oil are 0.319, 0.324, 35.6, 579, and 4.5. The composition of andrieslombaardite is ideally RhSbS, but it contains variable amounts of Fe, Pt, Pd, and Ir that may substitute for Rh. The mineral is cubic with unit-cell dimensions of a = 6.0278(4) Å, V = 219.01(6) Å 3 and Z = 4. It was synthesised at 400 and 550°C using stoichiometric elemental amounts. It is a member of the cobaltite group. The mineralisation of the intrusive dunite pipes was probably introduced at high temperatures, under magmatic conditions. The primary assemblages were to a certain degree overprinted and redistributed by low-temperature hydrothermal fluids. The Pt-Fe alloys from Yubdo containing PGM inclusions such as andrieslombaardite in the Yubdo-Alaskan-type complex were formed at some post-magmatic stage owing to PGE remobilisation during hydrothermal or metamorphic episodes.

58 GEOSCIENCES↗

High Performance (R-10/inch) Clay-Cellulose-Silica Nanopore Insulation Board For New and Retrofit Buildings (Final Scientific Report)

The objective of Liatris’s 3-year DOE BENEFIT project was to develop and validate a high-performance, lightweight, aerogel-based insulation board of ≥R-10/inch at a cost of ≤$\$$1.50 per board foot using non-flammable inorganic nanocomposites. We have summarized each yearly goal below: Year 1 – Ambient dried inorganic/organic nanocomposite, R-6/inch Year 2 – Processing efficiency and cost down, R-8/inch at $\$$2.0/board-ft Year 3 – Scale up to continuous, pilot production of R-10 at ≤ $\$$1.50/board-ft Over the course of the project period, Liatris has successfully met or exceeded all of the goals outlined above. The project scope over 3 years was extensive, covering method development of ambient dried silica aerogels in Budget Period 1, process formulation and R-value improvement in Budget Period 2, and composite scale up with corporate partners in Budget Period 3. Over the course of the project Liatris has been able to progressively improve the thermal resistance properties from about R-6/in to > R-11/in, 2-3X the performance of conventional insulation products.

36 MATERIALS SCIENCE↗

Petrogenesis of Apollo 12 mare basalts. Part 2: An open system model to explain the pigeonite basalt compositions

Original petrogenetic models suggested that the pigeonite basalts were the evolved equivalents of the olivine basalts. Rhodes et al. concluded that the olivine and pigeonite basalts were co-magmatic, but Neal et al. have demonstrated that these two basaltic groups are distinct and unrelated. The pigeonite suite is comprised of porphyritic basalts with a fine-grained ground mass and range continuously to coarse-grained microgabbros with ophitic to graphic textures. Although it was generally recognized that the pigeonite basalts were derived from the olivine basalts by olivine + minor Cr-spinel fractionation, the compositional gap between these groups is difficult to reconcile with such a model. Indeed, Baldridge et al. concluded that these two basaltic groups could not have been co-magmatic. In this paper, we suggest an open system AFC model for pigeonite basalt petrogenesis. The assimilant is lunar anorthositic crust and the r value used is 0.6. While the choice of assimilant composition is difficult to constrain, the modeling demonstrates the feasibility of this model.

Neal, Clive R.↗

Differential evolution of radio quiet and radio loud quasars

We have observed 40 optically selected high-redshift quasars with the Very Large Array (VLA) at 1515 MHz (20 cm). Three quasars are detected above our 3 sigma limit of 0.2 mJy. We review all available evidence on radio detections of optically selected quasars in terms of their ratio R of radio to optical luminosity. We find that the quasars ranked in the top 5-20 percent in R show strong evolution in their R distribution. We present two interpretations of this phenomenon. The first one poses that the R values decrease by a factor of around 100 from redshift 0.3 to 1.3. In the second interpretation, we consider that there are two populations of quasars, which we call radio silent and radio active, separated by R approximately 0.1. The radio-silent fraction of quasars increases from approximately 16% at redshift 0.3, to approximately 75% at redshift 1.3.

Schmidt, Maarten↗

Assessing Version 4 of the SMAP L4_SM Data Product

Version 4 of the SMAP Level 4 Surface and Root Zone Soil Moisture (L4_SM) product benefits from an improved land surface modeling system. Surface soil moisture is typically drier by several volumetric percent in Version 4 compared to Version 3, whereas root zone soil moisture is wetter in Version 4 in some regions and drier in others. Results from core validation site comparisons show that Version 4 of the L4_SM data product meets the accuracy requirement, which is formulated in terms of the RMSE after removal of the long-term mean difference (ubRMSE). The overall ubRMSE of the 3-hourly L4_SM data at the 9 km scale is 0.039 m3 m-3 for surface soil moisture and 0.029 m3 m-3 for root zone soil moisture, below the 0.04 m3 m-3 requirement. L4_SM surface and root zone soil moisture estimates are more skillful than model-only simulation estimates that are not informed by SMAP brightness temperature observations, with statistically significant improvements at the 5% level for surface soil moisture R and anomaly R values. Results from comparisons of the L4_SM product to in situ measurements from more than 400 sparse network sites corroborate the core validation site results.

Reichle, R.↗

Development of a size reduction equation for woody biomass: The influence of branch wood properties on Rittinger's constant

Size reduction is an essential but energy-intensive process for preparing biomass for conversion processes. Three well-known scaling equations (Bond, Kick, and Rittinger) are used to estimate energy input for grinding minerals and food particles. Previous studies have shown that the Rittinger equation has the best fit to predict energy input for grinding cellulosic biomass. In the Rittinger equation, Rittinger's constant (k R ) is independent of the size of ground particles, yet we noted large variations in k R among similar particle size ranges. In this research, the dependence of k R on the physical structure and chemical composition of a number of woody materials was explored. Branches from two softwood species (Douglas fir and pine) and two hardwood species (aspen and poplar) were ground in a laboratory knife mill. The recorded data included power input, mass flow rate, and particle size before and after grinding. Nine material properties were determined: particle density, solid density (pycnometer and x-ray diffraction methods), microfibril angle, fiber coarseness, fiber length, and composition (lignin and cellulose glucan contents). The correlation matrix among the nine properties revealed high degrees of interdependence between properties. The k R value had the largest positive correlation (+0.60) with particle porosity across the species tested. As a result, particle density was strongly correlated with lignin content (0.85), microfibril angle (0.71), fiber length (0.87), and fiber coarseness (0.78). An empirical model relating k R to particle density was developed.

09 BIOMASS FUELS↗

Emissions of nitrogen oxides from US urban areas: estimation from Ozone Monitoring Instrument retrievals for 2005–2014

Satellite remote sensing of tropospheric nitrogen dioxide (NO 2 ) can provide valuable information for estimating surface nitrogen oxides (NO x ) emissions. Using an exponentially modified Gaussian (EMG) method and taking into account the effect of wind on observed NO 2 distributions, we estimate 3-year moving-average emissions of summertime NO x from 35 US (United States) urban areas directly from NO 2 retrievals of the Ozone Monitoring Instrument (OMI) during 2005–2014. Following conclusions of previous studies that the EMG method provides robust and accurate emission estimates under strong-wind conditions, we derive top-down NO x emissions from each urban area by applying the EMG method to OMI data with wind speeds greater than 3–5 m s -1 . Meanwhile, we find that OMI NO 2 observations under weak-wind conditions (i.e., < 3 m s &minus;1 ) are qualitatively better correlated to the surface NO x source strength in comparison to all-wind OMI maps; therefore, we use them to calculate the satellite-observed NO 2 burdens of urban areas and compare with NO x emission estimates. The EMG results show that OMI-derived NO x emissions are highly correlated ( R > 0.93) with weak-wind OMI NO 2 burdens as well as with bottom-up NO x emission estimates over 35 urban areas, implying a linear response of the OMI observations to surface emissions under weak-wind conditions. The simultaneous EMG-obtained effective NO 2 lifetimes (~ 3.5 ± 1.3 h), however, are biased low in comparison to the summertime NO 2 chemical lifetimes. In general, isolated urban areas with NO x emission intensities greater than ~ 2 Mg h -1 produce statistically significant weak-wind signals in 3-year average OMI data. From 2005 to 2014, we estimate that total OMI-derived NO x emissions over all selected US urban areas decreased by 49 %, consistent with reductions of 43, 47, 49, and 44 % in the total bottom-up NO x emissions, the sum of weak-wind OMI NO 2 columns, the total weak-wind OMI NO 2 burdens, and the averaged NO 2 concentrations, respectively, reflecting the success of NO x control programs for both mobile sources and power plants. The decrease rates of these NO x -related quantities are found to be faster (i.e., -6.8 to -9.3 % yr &minus;1 ) before 2010 and slower (i.e., -3.4 to -4.9 % yr &minus;1 ) after 2010. For individual urban areas, we calculate the R values of pair-wise trends among the OMI-derived and bottom-up NO x emissions, the weak-wind OMI NO 2 burdens, and ground-based NO 2 measurements, and high correlations are found for all urban areas (median R = 0.8), particularly large ones ( R up to 0.97). The results of the current work indicate that using the EMG method and considering the wind effect, the OMI data allow for the estimation of NO x emissions from urban areas and the direct constraint of emission trends with reasonable accuracy.

54 ENVIRONMENTAL SCIENCES↗