Experimental measurements of diffusion coefficients for atomic oxygen
Catalytic surface recombination for measuring diffusion coefficients of atomic oxygen
Baker, C. E.↗
SEARCH · Search NASA
Results for “RECOMBINATION COEFFICIENT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Collisional Ionization Equilibrium for Optically Thin Plasmas
Reliably interpreting spectra from electron-ionized cosmic plasmas requires accurate ionization balance calculations for the plasma in question. However, much of the atomic data needed for these calculations have not been generated using modern theoretical methods and their reliability are often highly suspect. We have utilized state-of-the-art calculations of dielectronic recombination (DR) rate coefficients for the hydrogenic through Na-like ions of all elements from He to Zn. We have also utilized state-of-the-art radiative recombination (RR) rate coefficient calculations for the bare through Na-like ions of all elements from H to Zn. Using our data and the recommended electron impact ionization data of Mazzotta et al. (1998), we have calculated improved collisional ionization equilibrium calculations. We compare our calculated fractional ionic abundances using these data with those presented by Mazzotta et al. (1998) for all elements from H to Ni, and with the fractional abundances derived from the modern DR and RR calculations of Gu (2003a,b, 2004) for Mg, Si, S, Ar, Ca, Fe, and Ni.
Bryans, P.↗
The effect of N2/+/ recombination on the aeronomic determination of the charge exchange rate coefficient of O/+//2D/ with N2
The Atmosphere Explorer (AE) data are reexamined in the light of new laboratory measurements of the N2(+) recombination rate coefficient alpha. The new measurements support earlier measurements which yielded values of alpha significantly lower than the AE values. It is found that the values for alpha determined from the satellite data can be reconciled with the laboratory measurements, if the charge exchange rate coefficient for O(+)(2D) with N2 is less than one-quarter of that derived in the laboratory by Rutherford and Vroom (1971).
Torr, D. G.↗
Kinetics of O/super 3P/ + CO + M recombination.
Measurement of rate coefficients over the temperature range from 250 to 370 K for the three-body recombination of O(super 3P) with CO. Earlier results at 300 K have been re-evaluated and were found to have been influenced by unknown impurities in the CO, which have now been removed by more elaborate purification methods. For CO as the third body, the rate constant is given by K = 6.5 x 10 to the minus 33rd exp (-4340 plus or minus 550/RT) cm to the 6th power per sq molecule per sec. For N2 and CO2, the 296 K rate constants are 2.3 and 6.2 x 10 to the minus 36th cm to the 6th power per sq molecule per sec, respectively.
Slanger, T. G.↗
Collisional radiative recombination in high-pressure noble gas mixtures
Rate coefficients are calculated for neutral-assisted collisional radiative recombination in dense, weakly ionized rare-gas mixtures using the quasiequilibrium model developed by Bates. It is shown that the recombination rate can be significantly altered by the presence of a buffer gas. In particular, the presence of helium can enhance the collisional radiative recombination rate coefficient of heavy rare gases by a factor of 5.
Whitten, B. L.↗
The production of O(1S) from dissociative recombination of O2(+)
The first theoretical calculations of the rate coefficient alpha for dissociative recombination of O2(+) leading to O(1S) are reported for a wide range of temperatures. The findings are discussed in terms of the potential energy curves for the ground state of O2(+) and for the dissociative 1Sigma(u) state calculated here. Values of alpha for the equilibrium case in which the electron and vibrational temperatures are identical are shown.
Guberman, Steven L.↗
A Global Atmospheric Model of Meteoric Iron
The first global model of meteoric iron in the atmosphere (WACCM-Fe) has been developed by combining three components: the Whole Atmosphere Community Climate Model (WACCM), a description of the neutral and ion-molecule chemistry of iron in the mesosphere and lower thermosphere (MLT), and a treatment of the injection of meteoric constituents into the atmosphere. The iron chemistry treats seven neutral and four ionized iron containing species with 30 neutral and ion-molecule reactions. The meteoric input function (MIF), which describes the injection of Fe as a function of height, latitude, and day, is precalculated from an astronomical model coupled to a chemical meteoric ablation model (CABMOD). This newly developed WACCM-Fe model has been evaluated against a number of available ground-based lidar observations and performs well in simulating the mesospheric atomic Fe layer. The model reproduces the strong positive correlation of temperature and Fe density around the Fe layer peak and the large anticorrelation around 100 km. The diurnal tide has a significant effect in the middle of the layer, and the model also captures well the observed seasonal variations. However, the model overestimates the peak Fe+ concentration compared with the limited rocket-borne mass spectrometer data available, although good agreement on the ion layer underside can be obtained by adjusting the rate coefficients for dissociative recombination of Fe-molecular ions with electrons. Sensitivity experiments with the same chemistry in a 1-D model are used to highlight significant remaining uncertainties in reaction rate coefficients, and to explore the dependence of the total Fe abundance on the MIF and rate of vertical transport.
meteoric inputfunction↗
Atomic Data for Neutron-capture Elements I. Photoionization and Recombination Properties of Low-charge Selenium Ions
We present multi-configuration Breit-Pauli AUTOSTRUCTURE calculations of distorted-wave photoionization (PI) cross sections. and total and partial final-state resolved radiative recombination (RR) and dielectronic recombination (DR) rate coefficients for the first six ions of the trans-iron element Se. These calculations were motivated by the recent detection of Se emission lines in a large number of planetary nebulae. Se is a potentially useful tracer of neutron-capture nucleosynthesis. but accurate determinations of its abundance in photoionized nebulae have been hindered by the lack of atomic data governing its ionization balance. Our calculations were carried out in intermediate coupling with semi re1ativistic radial wavefunctions. PI and recombination data were determined for levels within the ground configuration of each ion, and experimental PI cross-section measurements were used to benchmark our results. For DR, we allowed (Delta)n = 0 core excitations, which are important at photoionized plasma temperatures. We find that DR is the dominant recombination process for each of these Se ions at temperatures representative of photoionized nebulae (approx.10(exp 4) K). In order to estimate the uncertainties of these data, we compared results from three different configuration-interaction expansions for each ion, and also tested the sensitivity of the results to the radial scaling factors in the structure calculations. We find that the internal uncertainties are typically 30-50% for the direct PI cross sections and approx.10% for the computed RR rate coefficients, while those for low-temperature DR can be considerably larger (from 15-30% up to two orders of magnitude) due to the unknown energies of near-threshold autoionization resonances. These data are available at the CDS, and fitting coefficients to the total RR and DR rate coefficients are presented. The results are suitable for incorporation into photoionization codes used to numerically simulate astrophysical nebulae, and will enable robust determinations of nebular Se abundances.
Sterling, N. C.↗
The Effect of the Spin-Forbidden Co((sup 1) Sigma plus) plus O((sup 3) P) Yields CO2 (1 Sigma (sub G) plus) Recombination Reaction on Afterbody Heating of Mars Entry Vehicles
Vibrationally excited CO2, formed by two-body recombination from CO((sup 1) sigma plus) and O((sup 3) P) in the wake behind spacecraft entering the Martian atmosphere reaction, is potentially responsible for the higher than anticipated radiative heating of the backshell, compared to pre-flight predictions. This process involves a spin-forbidden transition of the transient triplet CO2 molecule to the longer-lived singlet. To accurately predict the singlet-triplet transition probability and estimate the thermal rate coefficient of the recombination reaction, ab initio methods were used to compute the first singlet and three lowest triplet CO2 potential energy surfaces and the spin-orbit coupling matrix elements between these states. Analytical fits to these four potential energy surfaces were generated for surface hopping trajectory calculations, using Tully's fewest switches surface hopping algorithm. Preliminary results for the trajectory calculations are presented. The calculated probability of a CO((sup 1) sigma plus) and O((sup 3) P) collision leading to singlet CO2 formation is on the order of 10 (sup -4). The predicted flowfield conditions for various Mars entry scenarios predict temperatures in the range of 1000 degrees Kelvin - 4000 degrees Kelvin and pressures in the range of 300-2500 pascals at the shoulder and in the wake, which is consistent with a heavy-particle collision frequency of 10 (sup 6) to 10 (sup 7) per second. Owing to this low collision frequency, it is likely that CO((sup 1) sigma plus) molecules formed by this mechanism will mostly be frozen in a highly nonequilibrium rovibrational energy state until they relax by photoemission.
CO2 recombination↗
The dissociative recombination of O2/+/ in the ionosphere
Aeronomical determinations of the dissociative recombination reaction rate coefficient for O2(+) and alpha depend directly on a knowledge of the rate coefficient for the charge exchange of O(+) with O2 and k. The aeronomical determination of alpha is reevaluated using Atmosphere Explorer satellite data in light of a subsequent laboratory measurement of k (Chen et al., 1978). The results are found to be in good agreement with laboratory determinations of the coefficient for night-time conditions. For data obtained under sunlit conditions, however, the results differed significantly with those of the laboratory measurements. These results imply that the state of the O2(+) molecule major thermospheric processes needs to be examined in greater detail.
Torr, M. R.↗
Laboratory studies in ultraviolet solar physics
The research activity comprised the measurement of basic atomic processes and parameters which relate directly to the interpretation of solar ultraviolet observations and to the development of comprehensive models of the component structures of the solar atmosphere. The research was specifically directed towards providing the relevant atomic data needed to perform and to improve solar diagnostic techniques which probe active and quiet portions of the solar chromosphere, the transition zone, the inner corona, and the solar wind acceleration regions of the extended corona. The accuracy with which the physical conditions in these structures can be determined depends directly on the accuracy and completeness of the atomic and molecular data. These laboratory data are used to support the analysis programs of past and current solar observations (e.g., the Orbiting solar Observatories, the Solar Maximum Mission, the Skylab Apollo Telescope Mount, and the Naval Research Laboratory's rocket-borne High Resolution Telescope and Spectrograph). In addition, we attempted to anticipate the needs of future space-borne solar studies such as from the joint ESA/NASA Solar and Heliospheric Observatory (SOHO) spacecraft. Our laboratory activities stressed two categories of study: (1) the measurement of absolute rate coefficients for dielectronic recombination and electron impact excitation; and (2) the measurement of atomic transition probabilities for solar density diagnostics. A brief summary of the research activity is provided.
Parkinson, W. H.↗
Dielectronic Recombination: An Overview of Theory and Experiment, and some Astrophysical Implications
The status of dielectronic recombination (DR) rate coefficients used for modeling cosmic plasmas is discussed. A brief overview of theoretical and experimental studies of DR is given. Results are shown which demonstrate the astrophysical importance of accurate DR rates for studies of the intergalactic medium.
Savin, D. W.↗
Electron loss coefficients for the D-region of the ionosphere from rocket measurements during the eclipses of March 1970 and November 1966.
Observation that recombination-like electron loss coefficients measured during the March 1970 eclipse coincide with those from the November 1966 eclipse and range from 2 x 10 to the minus 7th power cu cm/sec at Z sub zero + 6 km to 0.00005 cu cm/sec at Z sub zero -2 km, where Z sub zero is the altitude of the steep gradient of electron concentration. During totality, Z sub zero was 82.5 km in 1970, and 86.8 km in 1966. For full-sun conditions, Z sub zero was 84 km on both eclipse days. Attachment-like electron loss coefficients from both eclipses are in good agreement below Z sub zero, and have a nearly constant value of about 0.008 per sec. Below Z sub zero, attachment-like loss rates agree with production rates - i.e., electron concentration is proportional to electron production.
Mechtly, E. A.↗
Shock tube study of the reaction H plus O2 plus Ar yields HO2 plus Ar
Rate coefficient data for the recombination reaction H + 02 + Ar yields H02 + Ar have been determined from studies of lean hydrogen-oxygen mixtures behind incident shock waves over the temperature range of 948 to 1125 K. Hydroxyl radical concentration profiles were measured by ultraviolet absorption spectroscopy, and rate data were obtained through analysis of induction time and exponential growth parameter data. Analysis of the data yielded a rate coefficient which was generally lower than most of the more recent values obtained from shock tube studies. The effect of boundary layer formation on the conditions behind the shock was also examined and found to be negligible.
Jachimowski, C. J.↗
Continuous polymer films deposited on top of porous substrates using plasma-enhanced atomic layer deposition and molecular layer deposition
Molecular layer deposition (MLD) is able to produce ultrathin polymer films with control over thickness, cross-linking, and chemical composition. With these capabilities, MLD should be useful in the fabrication of novel polymer membranes on porous supports. However, confining a continuous MLD film to the surface of porous substrates is difficult because of MLD film growth in the pores. The deposition in the pores lowers the conductance of the porous support. This paper presents a method to deposit continuous polymer films on top of porous substrates. In this method, Al2O3 plasma-enhanced atomic layer deposition (PE-ALD) using trimethylaluminum and oxygen plasma as the reactants was first used to cap the pores of the substrate. Subsequently, a polyamide MLD film was deposited on the Al2O3 PE-ALD capping layer using m-phenylenediamine and trimesoyl chloride as the reactants. The Al2O3 pore caps were then removed from the porous substrate by etching from the backside using a timed exposure to a dilute sodium hydroxide solution. This method was demonstrated using anodic aluminum oxide (AAO) and polyethersulfone (PES) porous substrates. Al2O3 PE-ALD film growth was limited to the top of the porous substrate, resulting in rapid surface recombination or high sticking coefficients for the reactive plasma species within the pores. Gas permeance measurements confirmed the pore capping of the AAO substrates. The reopening of the pores by dissolving the Al2O3 pore caps with a sodium hydroxide solution was monitored using gas permeance versus etch time. The removal of the Al2O3 pore caps from the PES substrates could also dissolve the Al2O3 layer underneath the MLD film. The loss of this Al2O3 layer led to the detachment of the MLD film from the PES substrate. However, the MLD film could be anchored to the PES support at fractures located in the Al2O3 film prior to the MLD. The Al2O3 film fracture allowed the MLD film to anchor firmly to the PES substrate by MLD in the pores of the PES porous substrate. The distance between the anchor points was a function of fracture density. This distance could be controlled by applying a tensile stress to the Al2O3 PE-ALD film to fracture the film through sample bending. This method produced firmly anchored polymer MLD films on top of the PES porous substrates.
Welch, Brian C. (ORCID:000000029747045X)↗
Effects of angular-momentum-changing collisions on dielectronic satellite spectra
A generalization of the low-density corona-model theory of the intensities of satellite lines of the resonance lines emitted by multiply charged helium-like ions in the X-ray spectra of high-temperature plasmas is developed in order to take account of electron collisional transitions between close autoionizing levels. A formalism for determining the population densities of the autoionizing levels and the satellite line intensities is presented, and the quantum mechanical calculation of autoionization, radiative decay and electron-induced collisional transitions is discussed. Generalized emission rate coefficients corresponding to dielectronic recombination and inner-shell-electron collisional excitation are tabulated as functions of electron density and temperature. The procedure is then used to illustrate the effects of angular-momentum-changing electron collisions on the intensities of the satellites of the 1s2p 1P to 1s2 1S resonance line of the ions Al XII and Si XIII. It is concluded that the collisional transitions have their most significant effect on the intensities of satellite transitions from metastable autoionizing states, which may be useful in determining plasma densities.
Jacobs, V. L.↗
The excitation of the O(1S) state by the dissociative recombination of O2(+) ions - Electron temperature dependence
The rate coefficient for the excitation of the O(1S) state due to the dissociative recombination of O2(+) (v of not greater than 3) ions has been determined as a function of the electron temperature from 300-3500 K. In agreement with the work of Guberman (1987), the results suggest that the absolute magnitude of alpha(1S) is nearly the same for a wide variety of O2(+) vibrational distributions over the electron temperature range normally encountered in the nocturnal F-region. It is noted that previous studies which modeled 5577-A airglow data using a fixed value for f(1S) may be misleading.
Zipf, Edward C.↗
The OI/1S/ state - Its quenching by O2 and formation by the dissociative recombination of vibrationally excited O2/+/ ions
The rate coefficient for the quenching of metastable O(1S) atoms by O2 was measured as a function of temperature from 250 to 550 K. The resulting Arrhenius expression correlates well with previous laboratory work. It is suggested that the much larger value of the rate coefficient inferred from an analysis of artificial auroral experiment, Precede, may be explained by overestimation of the contribution of O(1S) production from O2(+) dissociative recombination. The possibility that O(1S) atoms are produced only by the dissociative recombination of vibrationally excited O2(+) ions is examined; such excited ions would not exist in the Precede experiment because of the rapid cooling of the ions by resonant charge transfer processes.
Zipf, E. C.↗