Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECTOR SATELLITE SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Preliminary test results and upgrades for an automated assembly system

An automated structures assembly testbed developed by Langley Research Center to study the practical problems associated with the automated assembly of large space structures using robotic manipulators is described. Emphasis is placed on the requirements and features of system upgrades and their impact on system performance, flexibility, and reliability. The current research program is aimed at evolving the baseline assembly system into a flexible, robust, sensor-based system capable of assembling more complex truss-supported satellite systems. To achieve this objective, five system upgrades have been developed including a machine vision capability to eliminate taught robot arm positions; an on-board end-effector microprocessor to reduce communications; a second-generation end-effector to construct contoured trusses for antennas and install payloads; the installation of reflector-type panels on the truss to produce a complete and functional system, and an expert system to significantly reduce the amount of software code required for system operation and provide greater flexibility in implementing new features.

Will, Ralph W.↗
NASA NTRS2005

A GeoSTAR progress report

The Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR) is a new concept for a microwave sounder, intended to be deployed on NOAA's next generation of geostationary weather satellites, GOES-R. A ground based prototype has been developed at the Jet Propulsion Laboratory, under NASA Instrument Incubator Program sponsorship, and is now undergoing tests and performance characterization. With the aperture synthesis approach used by GeoSTAR it is possible to achieve very high spatial resolutions even in the crucial 50-GHz temperature sounding band without having to deploy the impractically large parabolic reflector antenna that is required with the conventional approach. The technology and system design required for GeoSTAR are rapidly maturing, and it is expected that a space demonstration mission can be developed before the first GOES-R launch. GeoSTAR will be ready for operational deployment 2-3 years after that. The prototype developed under IIP implements a small version of the temperature sounding component of GeoSTAR, is fully functional as a sounder and has all of the features and capabilities of an operational system with the exception of spatial resolution. It therefore represents a complete proof of concept as well as significant risk reduction for a space implementation.

microwaves↗
NASA NTRS1994

Special test equipment and fixturing for MSAT reflector assembly alignment

The MSAT Reflector Assembly is a state of the art subsystem for Mobile Satellite (MSAT), a geosynchronous-based commercial mobile telecommunication satellite program serving North America. The Reflector Assembly consisted of a deployable, three-hinge, folding-segment Boom, deployable 5.7 x 5.3-meter 16-rib Wrap-Rib Reflector, and a Reflector Pointing Mechanism (RPM). The MSAT spacecraft was based on a Hughes HS601 spacecraft bus carrying two Reflector Assemblies independently dedicated for L-band transmit and receive operations. Lockheed Missiles and Space Company (LMSC) designed and built the Reflector Assembly for MSAT under contract to SPAR Aerospace Ltd. Two MSAT satellites were built jointly by SPAR Aerospace Ltd. and Hughes Space and Communications Co. for this program, the first scheduled for launch in 1994. When scaled for wavelength, the assembly and alignment requirements for the Reflector Assembly were in many instances equivalent to or exceeded that of a diffraction-limited visible light optical system. Combined with logistical constraints inherent to large, compliant, lightweight structures; 'bolt-on' alignment; and remote, indirect spacecraft access; the technical challenges were formidable. This document describes the alignment methods, the special test equipment, and fixturing for Reflector Assembly assembly and alignment.

Young, Jeffrey A.↗
NASA NTRS2018

A New Laser Beam Pointing Method Using Laser Arrays

A new method is described for optical data transmissions from satellites using laser arrays for laser beam pointing. It combines a lens system and a VCSEL/Photodetector Array, both mature technologies, in a novel way. This system is applied to satellites in LEO. It can replace current architectures which use dynamical systems, (i.e., moving parts) to point the laser, and which use vibration isolation platforms. Results of computer simulations show diffraction limited beam propagation. Possible additional applications are to planetary distances (deep space optical communications, DSOC) to optical multiple access, to communication between a constellation of close satellites, and to satellites that use modulating retro-reflectors.

Goorjian, Peter M.↗
NASA NTRS1978

In orbit manufacture of solar reflector satellites

The implementation of an idea reported by Oberth (1929) is discussed. This idea is concerned with the reflection of sunlight to the ground by means of orbiting metal mirrors. The approach used for implementing Oberth's idea makes use of aluminized Mylar as a reflecting material which is supported with the aid of a structure which includes six booms and a peripheral mirror cable. Four low resistance one turn coils are formed by the structure. Magnetic forces for attitude maneuvers are obtained by energizing the coils. A bipropellant propulsion system is to be used to raise the initial 330 km circular parking orbit to a 330 by 1000 km elliptic orbit. Two thrusters are employed. They are oriented parallel to each other and the mirror surface. The mirror satellite can be completely folded so as to maximize the launch capability of the Shuttle.

Muller, R. M.↗
NASA NTRS1983

Phased-array-fed antenna configuration study, volume 2

Increased capacity in future satellite systems can be achieved through antenna systems which provide multiplicity of frequency reuses at K sub a band. A number of antenna configurations which can provide multiple fixed spot beams and multiple independent spot scanning beams at 20 GHz are addressed. Each design incorporates a phased array with distributed MMIC amplifiers and phasesifters feeding a two reflector optical system. The tradeoffs required for the design of these systems and the corresponding performances are presented. Five final designs are studied. In so doing, a type of MMIC/waveguide transition is described, and measured results of the breadboard model are presented. Other hardware components developed are described. This includes a square orthomode transducer, a subarray fed with a beamforming network to measure scanning performance, and another subarray used to study mutual coupling considerations. Discussions of the advantages and disadvantages of the final design are included.

Sorbello, R. M.↗
NASA NTRS2004

Ka-Band Multibeam Aperture Phased Array Being Developed

Phased-array antenna systems offer many advantages to low-Earth-orbiting satellite systems. Their large scan angles and multibeam capabilities allow for vibration-free, rapid beam scanning and graceful degradation operation for high rate downlink of data to users on the ground. Technology advancements continue to reduce the power, weight, and cost of these systems to make phased arrays a competitive alternative in comparison to the gimbled reflector system commonly used in science missions. One effort to reduce the cost of phased arrays is the development of a Ka-band multibeam aperture (MBA) phased array by Boeing Corporation under a contract jointly by the NASA Glenn Research Center and the Office of Naval Research. The objective is to develop and demonstrate a space-qualifiable dual-beam Ka-band (26.5-GHz) phased-array antenna. The goals are to advance the state of the art in Ka-band active phased-array antennas and to develop and demonstrate multibeam transmission technology compatible with spacecraft in low Earth orbit to reduce the cost of future missions by retiring certain development risks. The frequency chosen is suitable for space-to-space and space-to-ground communication links. The phased-array antenna has a radiation pattern designed by combining a set of individual radiating elements, optimized with the type of radiating elements used, their positions in space, and the amplitude and phase of the currents feeding the elements. This arrangement produces a directional radiation pattern that is proportional to the number of individual radiating elements. The arrays of interest here can scan the main beam electronically with a computerized algorithm. The antenna is constructed using electronic components with no mechanical parts, and the steering is performed electronically, without any resulting vibration. The speed of the scanning is limited primarily by the control electronics. The radiation performance degrades gracefully if a portion of the elements fail. The arrays can be constructed to conform to a mounting surface, and multibeam capability is integral to the design. However, there are challenges for mission designers using monolithic-microwave-integrated-circuit- (MMIC-) based arrays because of reduced power efficiency, higher costs, and certain system effects that result in link degradations. The multibeam aperture phased-array antenna development is attempting to address some of these issues, particularly manufacturing, costs, and system performance.

Reinhart, Richard C.↗
NASA NTRS2019

A New Laser Beam Pointing Method Using Laser Arrays

A new method is described for optical data transmissions from satellites using laser arrays for laser beam pointing. It combines a lens system and a vertical-cavity surface-emitting laser (VCSEL)/Photodetector Array, both mature technologies, in a novel way. This system is applied to satellites in low-Earth orbit, (LEO). It can replace current architectures which use dynamical systems, (i.e., moving parts) to point the laser, and which may use vibration isolation platforms. Results of computer simulations show diffraction limited beam propagation. Possible additional applications are to planetary distances (deep space optical communications, (DSOC)), to optical multiple access, (OMA), to communication between a constellation of close satellites, and to satellites that use modulating retro-reflectors. Keywords: laser beam pointing, free-space optical communication, low-Earth orbit (LEO) data communications, integrated VCSEL/ photodetector arrays, deep space optical communications (DSOC), optical multiple access (OMA), constellation of close satellites, modulating retro-reflectors.

Goorjian, P. M.↗
NASA NTRS2021

ICESat-2 Precision Orbit Determination

The ICESat-2 Precision Orbit Determination (POD) system computes the precise position of the laser altimeter instrument in inertial space, a measurement necessary for accurate geolocation of individual photon surface returns. ICESat-2 POD solutions are generated by the reduction of Global Positioning System (GPS) double-difference carrier phase observable residuals with NASA Goddard Space Flight Center's GEODYN software. Independent satellite laser ranging (SLR) measurements are withheld from the POD solutions and used as an independent arbiter of POD performance. Measurement model updates in the form of estimated GPS antenna phase center and satellite laser ranging retro-reflector tracking point offset vectors as well as a GPS antenna phase center variation map have led to significant improvement in POD performance. GPS residual analysis and orbit precision analysis show no significant anomalous temporal or geographic POD performance issues. The independent SLR residual analysis indicates that POD solutions have achieved a radial orbit accuracy just below 1.5 cm, thus exceeding the mission radial orbit accuracy requirement of 3.0 cm by more than a factor of 2. Future POD processing updates have been identified and will lead to even further improvements in POD performance.

T. C. Thomas↗
NASA NTRS1976

A five-frequency radiometer antenna system feed horn

The feasibility of operating a five frequency feed as a radiometer for use on board a Nimbus type satellite was investigated. Five narrow band frequencies (6.6, 10.7, 18.5, 21.5 and 33 GHz) were multiplexed onto a single receive feed employing dual linear polarization at each frequency with a better than 25 db isolation between each polarization. The production of a horn design which can illuminate a parabolic reflector segment with an f/D ratio of approximately 0.4, producing an edge illumination of approximately -20 db is described. The final overall design is presented with results showing that this design concept has an acceptable electrical performance.

Source record↗
NASA NTRS1980

Satellite power systems structures: A 1980 technology status review

The classes of major structural components and constructions utilized were considered. A review of the current (SPS) structure technology status was made. The major issues considered pertinent to SPS structures are: Cost effective construction, construction materials, structural design requirements, stress and dimensional integrity of as-built structures, and predictability of strength and dynamic behavior. The feasibility of passive figure control approach to MPTS flatness, of structure stiffness compatible with MPTS pointing, of passive control through damping, and the feasibility of space fabrication of ultra-large reflector surfaces are also considered. Qualification, model verification, inspection are considered of vital concern.

Greenberg, H. S.↗
NASA NTRS1989

Multiple-Beam Communications Antenna

System has both fixed-spot and scanning coverage. Advanced offset-fed spacecraft antenna systems operating in 30/20 GHz frequency bands developed to provide multiple-radiating fixed-spot and regional-coverage scanning beams for use on communications satellites. Operating at higher frequencies, provides alternate frequency bands for expansion of existing satellite services and achieving frequency reuse capability for conservation of frequency spectrum. 20-GHz transmitting antenna is offset-fed, dual-reflector configuration. 30-GHz receiving antenna has orthogonal polarized feeds, hyperbolic reflectors, and two subreflectors.

Myhre, R. W.↗
NASA NTRS1980

Solar power satellite offshore rectenna study

It was found that an offshore rectenna is feasible and cost competitive with land rectennas but that the type of rectenna which is suitable for offshore use is quite different from that specified in the present reference system. The result is a nonground plane design which minimizes the weight and greatly reduces the number of costly support towers. This preferred design is an antenna array consisting of individually encapsulated dipoles with reflectors supported on feed wires. Such a 5 GW rectenna could be built at a 50 m water depth site to withstand hurricane and icing conditions for a one time cost of 5.7 billion dollars. Subsequent units would be about 1/3 less expensive. The east coast site chosen for this study represents an extreme case of severe environmental conditions. More benign and more shallow water sites would result in lower costs. Secondary uses such as mariculture appear practical with only minor impact on the rectenna design. The potential advantages of an offshore rectenna, such as no land requirements, removal of microwave radiation from populated areas and minimal impact on the local geopolitics argue strongly that further investigation of the offshore rectenna should be vigorously pursued.

Source record↗
NASA NTRS2000

ACTS Ka-Band Earth Stations: Technology, Performance, and Lessons Learned

The Advanced Communications Technology Satellite (ACTS) Project invested heavily in prototype Ka-band satellite ground terminals to conduct an experiments program with the ACTS satellite. The ACTS experiment's program proposed to validate Ka-band satellite and ground station technology. demonstrate future telecommunication services. demonstrate commercial viability and market acceptability of these new services, evaluate system networking and processing technology, and characterize Ka-band propagation effects, including development of techniques to mitigate signal fading. This paper will present a summary of the fixed ground terminals developed by the NASA Glenn Research Center and its industry partners, emphasizing the technology and performance of the terminals (Part 1) and the lessons learned throughout their six year operation including the inclined orbit phase of operations (Full Report). An overview of the Ka-band technology and components developed for the ACTS ground stations is presented. Next. the performance of the ground station technology and its evolution during the ACTS campaign are discussed to illustrate the technical tradeoffs made during the program and highlight technical advances by industry to support the ACTS experiments program and terminal operations. Finally. lessons learned during development and operation of the user terminals are discussed for consideration of commercial adoption into future Ka-band systems. The fixed ground stations used for experiments by government, academic, and commercial entities used reflector based offset-fed antenna systems ranging in size from 0.35m to 3.4m antenna diameter. Gateway earth stations included two systems, referred to as the NASA Ground Station (NGS) and the Link Evaluation Terminal (LET). The NGS provides tracking, telemetry, and control (TT&C) and Time Division Multiple Access (TDMA) network control functions. The LET supports technology verification and high data rate experiments. The ground stations successfully demonstrated many services and applications at Ka-band in three different modes of operation: circuit switched TDMA using the satellite on-board processor, satellite switched SS-TDMA applications using the on-board Microwave Switch Matrix (MSM), and conventional transponder (bent-pipe) operation. Data rates ranged from 4.8 kbps up to 622 Mbps. Experiments included: 1) low rate (4.8- 1 00's kbps) remote data acquisition and control using small earth stations, 2) moderate rate (1-45 Mbps) experiments included full duplex voice and video conferencing and both full duplex and asymmetric data rate protocol and network evaluation using mid-size ground stations, and 3) link characterization experiments and high data rate (155-622 Mbps) terrestrial and satellite interoperability application experiments conducted by a consortium of experimenters using the large transportable ground stations.

Reinhart, Richard C.↗
NASA NTRS1993

Geostationary payload concepts for personal satellite communications

This paper reviews candidate satellite payload architectures for systems providing world-wide communication services to mobile users equipped with hand-held terminals based on large geostationary satellites. There are a number of problems related to the payload architecture, on-board routing and beamforming, and the design of the S-band Tx and L-band Rx antenna and front ends. A number of solutions are outlined, based on trade-offs with respect to the most significant performance parameters such as capacity, G/T, flexibility of routing traffic to beams and re-configuration of the spot-beam coverage, and payload mass and power. Candidate antenna and front-end configurations were studied, in particular direct radiating arrays, arrays magnified by a reflector and active focused reflectors with overlapping feed clusters for both transmit (multimax) and receive (beam synthesis). Regarding the on-board routing and beamforming sub-systems, analog techniques based on banks of SAW filters, FET or CMOS switches and cross-bar fixed and variable beamforming are compared with a hybrid analog/digital approach based on Chirp Fourier Transform (CFT) demultiplexer combined with digital beamforming or a fully digital processor implementation, also based on CFT demultiplexing.

Benedicto, J.↗
NASA NTRS1983

Status of NASA's multibeam communications technology program

Progress with prototype components for demonstrating an acceptable performance level for multibeam 30/20 GHz satellite communications scheduled for service in 1988 is summarized. Numerous companies were contracted by NASA for the various components and subsystems, which include 20 GHz transmitters, a traveling wave tube transmitter, an IMPATT amplifier, a GaAs FET amplifier, a 30 GHz low noise receiver, a trunking matrix switch, and a baseband processor. The key system is a 20 GHz offset dual reflector antenna with shaped surfaces for multibeam transmission. Tests to date have indicated success at meeting the performance objectives.

Santarpia, D. E.↗
NASA NTRS1992

The ACTS multibeam antenna

The Advanced Communications Technology Satellite (ACTS) to be launched in 1993 introduces several new technologies including a multibeam antenna (MBA) operating at Ka-band. The satellite is introduced briefly, and then the MBA, consisting of electrically similar 30 GHz received and 20 GHz transmit offset Cassegrain systems utilizing orthogonal linear polarizations, is described. Dual polarization is achieved by using one feed assembly for each polarization in conjunction with nested front and back subreflectors, the gridded front subreflector acting as a window for one polarization and a reflector for the other. The antennas produce spot beams with approximately 0.3 deg beamwidth and gains of approximately 50 dbi. High surface accuracy and high edge taper produce low sidelobe levels and high cross-polarization isolation. A brief description is given of several Ka-band components fabricated for ACTS. These include multiflare antenna feedhorns, beam-forming networks utilizing latching ferrite waveguide switches, a 30 GHz high mobility electron transmitter (HEMT) low-noise amplifier and a 20 GHz TWT power amplifier.

Regier, Frank A.↗
NASA NTRS2017

In-flight pointing accuracy assessment and GNC commissioning overview for the dual-spinning SMAP (Soil Moisture Active Passive) spacecraft

NASA’s new SMAP (Soil Moisture Active Passive) spacecraft is a radar and radiometer- based climate monitoring mission that, for an earth-orbiting satellite, presented an uncommonly large engineering challenge for the spacecraft designers at NASA’s Jet Propulsion Laboratory. The primary engineering challenge of this mission was to design a three-axis stabilized dual-spinning spacecraft with the largest spinning flexible mesh reflector of any known spacecraft. This paper reports on the attitude control performance of this duel-spinning conicalscanning system during the first 18 months of science operations, and provides an overview of the Guidance, Navigation, and Control (GNC) subsystem performance for this climate monitoring asset.

Sung, Tina S.↗