SEARCH · Search NASA

Results for “RTG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Power source considerations for Grand Tour missions.

At the present time, there exists no known power source that will satisfy the power, weight, lifetime, and other stringent requirements of an extended outer-planet mission. Exploratory studies indicate the need for a solar-independent power source capable of supplying approximately 500 W of power over mission lifetimes of up to 12 years. The only known power source which can possibly meet these requirements, in the 1975 to 1979 time period, is a radioisotope thermoelectric generator (RTG). In 1969 a program began to develop a long-life, plutonium-fueled radioisotope thermoelectric power system. Aspects of spacecraft configuration are discussed together with power source requirements, RTG/spacecraft integration, operational details, and problems of safety.

Merrill, O. S.↗

NASA NTRS1973

Thermal control and structures approach for fluorinated propulsion.

FLOX and fluorine oxidizers require cryogenic storage at 86 K (-305 F) aboard a spacecraft, whereas their respective fuels MMH and hydrazine require room temperature storage. Propulsion configuration trade-off studies have been made for two potential classes of missions, an outer planet orbiter utilizing RTG's and an inner planet orbiter utilizing solar panels. The preliminary designs incorporate the fuel tank within the thermally controlled electronics compartment and expose the cryogenic tank to space. The cryogenic tank is isolated with foam, shadow shields and a titanium truss support. Its vernier temperature control is accomplished with electrical heaters.

Stimpson, L. D.↗

NASA NTRS1973

High temperature material interactions of thermoelectric systems using silicon germanium.

The efficient use of silicon germanium thermoelectric material for radioisotope thermoelectric generators (RTG) is achieved by operation at relatively high temperatures. The insulation technique which is most appropriate for this application uses multiple layers of molybdenum foil and astroquartz. Even so, the long term operation of these materials at elevated temperatures can cause material interaction to occur within the system. To investigate these material interactions, the Jet Propulsion Laboratory is currently testing a number of thermoelectric modules which use four silicon germanium thermoelectric couples in conjunction with the multifoil thermal insulation. The paper discusses the results of the ongoing four-couple module test program and correlates test results with those of a basic material test program.

Stapfer, G.↗

NASA NTRS1973

Design of a nuclear isotope heat source assembly for a spaceborne mini-Brayton power module.

Results of a study to develop a feasible design definition of a heat source assembly (HSA) for use in nominal 500-, 1200-, or 2000-W(e) mini-Brayton spacecraft power systems. The HSA is a modular design which is used either as a single unit to provide thermal energy to the 500-W(e) mini-Brayton power module or in parallel with one or two additional HSAs for the 1200- or 2000-W(e) power module systems. Principal components consist of a multihundred watt RTG isotope heat source, a heat source heat exchanger which transfers the thermal energy from the heat source to the mini-Brayton power conversion system, an auxiliary cooling system which provides requisite cooling during nonoperation of the power conversion module and an emergency cooling system which precludes accidental release of isotope fuel in the event of system failure.

Wein, D.↗

NASA NTRS1975

Sublimation behavior of silicon nitride /Si3N4/ coated silicon germanium /SiGe/ unicouples

For the Multi-Hundred Watt (MHW) Radioisotope Thermoelectric Generator (RTG), the silicon germanium unicouples are coated with silicon nitride to minimize degradation mechanisms which are directly attributable to material sublimation effects. A program is under way to determine the effective vapor suppression of this coating as a function of temperature and gas environment. The results of weight loss experiments, using Si3N4 coated hot shoes (SiMo), operating over a temperature range from 900 C to 1200 C, are analyzed and discussed. These experiments were conducted both in high vacuum and at different pressures of carbon monoxide (CO) to determine its effect on the coating. Although the results show a favorable vapor suppression at all operating temperatures, the pressure of the CO and the thickness of the coating have a decided effect on the useful lifetime of the coating.

Stapfer, G.↗

NASA NTRS1976

Shear dampers for deflections of micro-inch magnitudes

The rotation of the TV camera on the Mariner Jupiter/Saturn 1977 (MJS77) spacecraft will excite the long magnetometer and heavy RTG booms which are slightly damped perturbances that have long settling times. To ensure clear TV pictures additional damping was required over micro-inch displacements and at low frequencies. The solution incorporated elastomeric shear dampers at the base of these booms which possessed high loss tangent values in the expected frequency and temperature ranges. Presented are the shear damper design, results of full scale horizontal boom tests and relative effects of damper sizing and temperature. Boom instrumentation and excitation used for the full scale tests are also discussed.

Otth, D.↗

NASA NTRS1977

Results of metallographical diagnostic examination of Navy half-watt thermoelectric converters degraded by accelerated tests

To verify the 15-year reliability of the Navy half-watt radioisotope thermoelectric generator (RTG), bismuth-telluride thermoelectric converters were submitted to testing at high temperatures which accelerated the degradation and caused failure of the converters. Metallographic diagnostic examination of failed units verified failure mechanisms. Results of diagnostic examinations are presented.

Rosell, F. E., Jr.↗

NASA NTRS1978

A design for a 1984 Mars rover

A Mars rover is planned for the mid-1980's as a follow-up to the Viking program, and as a prelude to a return-to-earth mission of Martian samples in the late eighties or early nineties. An overall view of the rover's configuration is presented with a summary of basic design parameters. Six subsystems are outlined: computing, with a 10 to the 8th bit bubble memory; mobility, designed for a journey of 100 km in 2 earth years; science sample acquisition, including a soil auger and hard rock drill; power, supplied by an RTG and stored in batteries; telecommunication, with 50 K bit UHF transmission relayed through an orbiter; and visual imaging, employing two television cameras, each with an 800 x 800 pixel charge coupled device. Scientific research goals include information about Martian seismic characteristics, magnetic field, surface heat flow, chemical composition, geology along a transverse, and meteorology. Attention is given to the necessity of rover autonomy from earth commands.

Dobrotin, B. M.↗

NASA NTRS1979

Performance testing of thermoelectric generators including Voyager and LES 8/9 flight results

Several thermoelectric generators ranging in output power from 0.5 to 155 W have been completed or are undergoing testing at JPL. These generators represent a wide range of technologies, using Bi2Te3, PbTe and SiGe thermoelectric materials. Several of these generators are of a developmental type, such as HPG S/N2, and others are representative of Transit and Multi-Hundred Watt (MHW) Technology. Representative flight performance data of LES 8/9 and Voyager RTG's are presented and compared with the DEGRA computer program based on the data observed from tests of SiGe couples, modules and MHW generators.

Garvey, L.↗

NASA NTRS1980

Concentrator-enhanced photovoltaic arrays for deep space applications

The useful operational range of photovoltaic solar arrays has been limited to 1.5 AU (Mars orbit) due primarily to solar intensity constraints. Preliminary results indicate that the use of concentrator mirrors in conjunction with solar arrays can extend the practical operating range of photovoltaic space power sources to at least 9.5 AU (Saturn orbit). Various aspects of concentrator-enhanced photovoltaic arrays such as size, structure, thermal characteristics, intensity uniformity, pointing accuracy requirements, deployment methods, power performance and system mass are presented. Based on this information, concentrator-enhanced photovoltaic arrays are superior, with respect to power-to-mass and cost, to existing power sources used for deep space missions. The sensitivity of concentrator-enhanced solar arrays to particulate radiation was also examined for representative deep space missions. Results are presented which show that a radiation-degraded, deep space, concentrator-enhanced solar array's performance exceeds that of existing RTG power sources.

Rockey, D. E.↗

NASA NTRS1982

Miniature J-T refrigators using adsorption compressors

More sophisticated cooling systems for the employed detectors will be needed to satisfy the demand for higher resolution and sensitivity of various detectors used in space missions. The design of the cooling system must take into consideration the unique environment of space vehicles. It is pointed out that a deep space vehicle usually has an ample supply of waste heat from a radioisotope thermoelectric generator (RTG) and has a heat sink near zero Kelvin. Passive radiative coolers have been used for cooling temperatures above 90 K. Cooling below 90 K is currently handled by phase changes of solid or liquid cryogens or mechanical refrigeration. However, the weight of the cryogen may be a problem in a long duration space mission. Refrigerators of small cooling capacity are required in many spacecraft applications. For some future NASA missions, a multistage Joule-Thomson refrigerator using adsorption compressors appears particularly attractive. A study is discussed of four different refrigeration stages which use charcoal as the adsorbent. The adsorbed gases are nitrogen, helium, hydrogen, and neon.

Chan, C. K.↗

NASA NTRS1984

Development of advanced thermoelectric materials

The development of an advanced thermoelectric material for radioisotope thermoelectric generator (RTG) applications is reported. A number of materials were explored. The bulk of the effort, however, was devoted to improving silicon germanium alloys by the addition of gallium phosphide, the synthesis and evaluation of lanthanum chrome sulfide and the formulation of various mixtures of lanthanum sulfide and chrome sulfide. It is found that each of these materials exhibits promise as a thermoelectric material.

Source record↗

NASA NTRS1985

Potential civil mission applications for space nuclear power systems

It is pointed out that the energy needs of spacecraft over the last 25 years have been met by photovoltaic arrays with batteries, primary fuel cells, and radioisotope thermoelectric generators (RTG). However, it might be difficult to satisfy energy requirements for the next generation of space missions with the currently used energy sources. Applications studies have emphasized the need for a lighter, cheaper, and more compact high-energy source than the scaling up of current technologies would permit. These requirements could be satisfied by a nuclear reactor power system. The joint NASA/DOD/DOE SP-100 program is to explore and evaluate this option. Critical elements of the technology are also to be developed, taking into account space reactor systems of the 100 kW class. The present paper is concerned with some of the civil mission categories and concepts which are enabled or significantly enhanced by the performance characteristics of a nuclear reactor energy system.

Ambrus, J. H.↗

NASA NTRS1986

Management experience of an international venture in space The Ulysses mission

The management of the Ulysses project, a probe which will fly a solar polar orbit, is described. The 5-yr mission will feature a flyby of Jupiter to deflect the spacecraft into a high-inclination orbit. Data on the solar corona, solar wind, the sun-wind interface, the heliospheric magnetic field, solar and nonsolar cosmic rays, etc., will be gathered as a function of the solar latitude. NASA will track and control the probe with the Deep Space Network. JPL provides project management for NASA while the Directorate of Scientific Programs performs ESA management functions. The DOE will provide a radioisotope thermoelectric generator while NASA and ESA each supply half the scientific payload. A NASA-ESA Joint Working Group meets about twice per year to monitor the project and discuss the technical and scientific requirements. Safety issues and measures which are being addressed due to the presence of the Pu-238 heat source for the RTG are discussed.

Yoshida, Ronald Y.↗

NASA NTRS1987

Materials property definition and generation for carbon-carbon and carbon phenolic materials

A data base program to generate statistically significant material-property data for carbon-carbon and carbon phenolic materials to be used in designs of Space Shuttle is described. The program, which will provide data necessary for thermal and stress modeling of Shuttle nozzle and exit cone structures, includes evaluation of tension, compression, shear strength, shear modulus, thermal expansion, thermal conductivity, permeability, and emittance for both materials; the testing of carbon phenolic materials also includes CTE, off-gassing, pyrolysis, and RTG. Materials to be tested will be excised from Space Shuttle inlet, throat, and exit cone billets and modified involute carbon-carbon exit cones; coprocessed blocks, panels, and cylinders will also be tested.

Canfield, A. R.↗

NASA NTRS1987

Small space reactor power systems for unmanned solar system exploration missions

A preliminary feasibility study of the application of small nuclear reactor space power systems to the Mariner Mark II Cassini spacecraft/mission was conducted. The purpose of the study was to identify and assess the technology and performance issues associated with the reactor power system/spacecraft/mission integration. The Cassini mission was selected because study of the Saturn system was identified as a high priority outer planet exploration objective. Reactor power systems applied to this mission were evaluated for two different uses. First, a very small 1 kWe reactor power system was used as an RTG replacement for the nominal spacecraft mission science payload power requirements while still retaining the spacecraft's usual bipropellant chemical propulsion system. The second use of reactor power involved the additional replacement of the chemical propulsion system with a small reactor power system and an electric propulsion system. The study also provides an examination of potential applications for the additional power available for scientific data collection. The reactor power system characteristics utilized in the study were based on a parametric mass model that was developed specifically for these low power applications. The model was generated following a neutronic safety and operational feasibility assessment of six small reactor concepts solicited from U.S. industry. This assessment provided the validation of reactor safety for all mission phases and generatad the reactor mass and dimensional data needed for the system mass model.

Bloomfield, Harvey S.↗

NASA NTRS1987

Solar cell design for avoiding LILT degradation

Growing concerns about radioisotope thermoelectric generator (RTG) performance potential, cost, safety, and availability have renewed interest in utilizing photovoltaic energy conversion for future JPL interplanetary missions such as the Mariner Mark II set. Although lightweight solar array technology has advanced to the point where it would appear to provide an alternative power source, anomalous silicon cell curve shape degradation at conditions of low intensity and low temperature (LILT) severely restricts photovoltaic applications for missions beyond 3 AU solar distance. In order to extend photovoltaic applications to distances of 5 AU, ways to minimize the deleterious impact of LILT cell degradation were investigated. These investigations have ranged from consideration of individual cell selection for LILT behavior to the examination of methods for reducing or eliminating cell LILT degradation by modifying the cell processing. Use of a partial oxide barrier between the cell n+ contacts and the silicon has been shown to reduce significantly both the occurrence and magnitude of the LILT degradation.

Stella, P. M.↗

NASA NTRS1989

Mars rover 1988 concepts

Results of FY88 studies of a sample-collecting Mars rover are presented. A variety of rover concepts are discussed which include different technical approaches to rover functions. The performance of rovers with different levels of automation is described and compared to the science requirement for 20 to 40 km to be traversed on the Martian surface and for 100 rock and soil samples to be collected. The analysis shows that a considerable amount of automation in roving and sampling is required to meet this requirement. Additional performance evaluation shows that advanced RTG's producing 500 W and 350 WHr of battery storage are needed to supply the rover.

Pivirotto, Donna Shirley↗