Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rare Earth Compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Intrinsic Bonding and Reactivity of Actinide Clusters Poster

The effect of electronic structure on chemical bonding and reactivity is one of the most important questions in the field of chemistry. Insight into chemical bond formation involving elements that contain f electrons (i.e., the lanthanides and actinides) is critical for solving specific technical challenges, such as development of advanced nuclear fuel cycles and efficient rare earth separations, as well as a broader understanding of bonding across the entire periodic table. The primary technique for studying the fundamentals of lanthanide and actinide bonding is crystallization of metal-ligand compounds followed by structural determination with X-rays and comparison to theory with computational chemistry. While this procedure has yielded significant insights for a wide variety of elements, it is challenging to apply to the heavier trans-uranic actinides such as berkelium and californium because of limited material availability, significant radioactivity, and poorly understood chemical reactivity of these elements. We hypothesize that by forming actinide-ligand clusters in a mass spectrometer and probing their reactivity in the gas-phase, many of the challenges associated with studying the heavier trans-uranic elements can be circumvented. This project will develop a capability to address a wide range of actinide bonding and reactivity phenomena, increasing Idaho National Laboratory’s capability to address fundamental questions at the forefront of heavy element chemical and molecular science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Prediction of low-Z collinear and noncollinear antiferromagnetic compounds having momentum-dependent spin splitting even without spin-orbit coupling

The over 60 years old Rashba-Dresselhaus effect predicts spin-orbit coupling (SOC) induced momentum-dependent spin splitting and spin polarization in materials with noncentrosymmetric structures. Strong SOC induced effects usually require high-atomic number (Z) elements such as rare-earth elements. It has recently been pointed out that antiferromagnets could hold SOC-independent spin splitting and spin polarization. In the present work we develop the spatial and magnetic symmetry conditions enabling such antiferromagnet (AFM)-induced spin splitting, dividing the 1651 magnetic space groups into seven different spin splitting prototypes (SST-1 to SST-7). This analysis places the physics of AFM spin splitting (SST-4) within the broader context of symmetry conditions that enable the more familiar forms of spin splitting, such as ferromagnetic Zeeman effect (SST-5), nonmagnetic no spin splitting (SST-6), and the nonmagnetic Rashba and Dresselhaus effects (SST-7). The AFM-induced spin splitting and spin polarization do not necessarily require breaking of inversion symmetry or the presence of SOC, hence can exist even in centrosymmetric, low-Z light element compounds, considerably broadening the material base for spin manipulations. We use the “inverse design” approach of first formulating the target property (here, spin splitting in low-Z compounds not restricted to low symmetry structures), then derive the enabling physical design principles—the magnetic symmetry conditions—to search realizable compounds that satisfy these a priori design principles. This process uncovers 422 magnetic space groups (160 centrosymmetric and 262 noncentrosymmetric) that could hold AFM-induced, SOC-independent spin splitting and spin polarization. We then search for stable compounds following such enabling symmetries. We investigate the electronic and spin structures of some selected prototype compounds by density functional theory (DFT) and find spin textures that are different than the traditional Rashba-Dresselhaus patterns and exist even in the absence of SOC effect. We provide the DFT results for all antiferromagnetic spin splitting prototypes (SST-1, SST-2, SST-3, SST-4), and concentrate on two limits of SST-4 that are particularly unusual: When spin splitting is momentum dependent (just like the Rashba effect) but is enabled in antiferromagnets even in the absence of SOC in the Hamiltonian. This includes examples of (a) centrosymmetric SST-4A compounds (e.g., orthorhombic LaMnO 3 illustrating collinear AFM, as well as cubic NiS 2 illustrating noncollinear AFM) and (b) noncentrosymmetric SST-4B compounds (e.g., rhombohedral MnTiO 3 illustrating collinear AFM and hexagonal ScMnO 3 illustrating noncollinear AFM). The symmetry design principles outlined here, along with their transformation into an inverse design material search approach and DFT verification, could open the way to their experimental examination.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A strain density function to analyze particle size effects during high velocity impacts of yttria

Here, the impact behavior of a single yttria (Y 2 O 3 ) nanoparticle onto a Y 2 O 3 substrate is studied as a function of particle velocity (300–1200 m/s) and diameter (12–50 nm) using molecular dynamics simulations. To analyze the results, a strain density function is developed to provide both quantitative and qualitative information about the deformation mechanisms that contribute to the final state of the system. This function provides both clear evidence of shear localization and insight into the conditions for which localization occurs during the impact of Y 2 O 3 particles as they approach experimentally relevant sizes. Further analysis shows that localization and fragmentation only occur for Y 2 O 3 impacts with diameters of at least 50 nm, while particles with diameters of 25 nm and smaller deform primarily by amorphization and viscous flow. Implications for the deposition of films of Y 2 O 3 and other rare-earth oxides via the micro cold spray process are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Orbital degree of freedom in high entropy oxides

The spin, charge, and lattice degrees of freedom and their interplay in high entropy oxides were intensively investigated in recent years. However, how the orbital degree of freedom is affected by the extreme disorder in high entropy oxides has not been studied. In this work, using perovskite structured RVO 3 as a materials playground, we report how the disorder arising from mixing different rare earth ions at the rare earth site affects the orbital ordering of V 3+ t 2g -electrons. Since each member of RVO 3 (R = rare earth and Y) crystallizes into the same orthorhombic Pbnm structure, the configurational entropy should not be critical for the stability of (R 1,..., Rn)VO 3 . The spin and orbital ordering was studied by measuring magnetic properties and specific heat of single crystals. Rather than the number and type of rare earth ions, the average and variance of ionic radius are the key factors determining the spin and orbital order in (R 1,..., Rn)VO 3 . When the size variance is small, the average ionic radius takes precedence in dictating spin and orbital order. Increasing size variance suppresses the G-type orbital order (G-OO) and C-type antiferromagnetic order (C-AF) but favors the C-OO/G-AF state and spin-orbital entanglement. In conclusion, these findings suggest that the extreme disorder introduced by mixing multiple rare earth ions in high entropy perovskites might be employed to preserve the orbital degree of freedom to near the magnetic order, which is necessary for the electronic driven orbital ordering in a Kugel-Khomskii compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Tuning the melting point and phase stability of rare-earth oxides to facilitate their crystal growth from the melt

The challenge of growing rare-earth (RE) sesquioxide crystals can be overcome by tailoring their structural stability and melting point via composition engineering. This work contributes to the advancement of the field of crystal growth of high-entropy oxides. A compound with only small REs (Lu,Y,Ho,Yb,Er) 2 O 3 maintains a cubic C-type structure upon cooling from the melt, as observed via in-situ high-temperature neutron diffraction on aerodynamically levitated samples. On the other hand, a compound with a mixture of small and large REs (Lu,Y,Ho,Nd,La) 2 O 3 crystallizes as a mixture of a primary C-type phase with an unstable secondary phase. Crystals of compositions (Lu,Y,Ho,Nd,La) 2 O 3 and (Lu,Y,Gd,Nd,La) 2 O 3 were grown by the micro-pulling-down (mPD) method with a single monoclinic B-type phase, while a powder of (Lu,Y,Ho,Yb,Er) 2 O 3 did not melt at the maximum operating temperature of an iridium-rhenium crucible. The minimization of the melting point of the two grown crystals is attributed to the mismatch in cation sizes. The electron probe microanalysis reveals that the general element segregation behavior in the crystals depends on the composition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Homologous Alkali Metal Copper Rare-Earth Chalcogenides A 2 Cu 2 n Ln 4 Q 7+ n ( n = 1, 2, 3)

Twenty-seven new members of the A 2 Cu 2n Ln 4 Q 7+n (A = Cs, Rb; Ln = La-Nd, Sm, Gd-Yb; Q = S, Se) homologous series were synthesized in one of three structural types (indicated by n = 1, 2, 3). All the compounds contained 3D frameworks with alkali-metal-containing tunnels. For each increment in n, one Cu 2 Q was added, which was incorporated into the framework as an edge-sharing tetrahedron by replacing a square planar chalcogenide site. High-throughput DFT calculations predicted many of the phases to be thermodynamically stable. These predictions were compared with the synthesis results for the phases formed in each composition space. In the syntheses, heavier lanthanides showed a preference to start forming the n = 3 ACu 3 Ln 2 Q 5 , which is consistent with the predictions. RbCuNd 2 Se 4 and RbCuTb 2 Se 4 were found to be thermally stable under vacuum at temperatures up to 1000 °C. Optical measurements revealed band gaps of 1.55(5) and 1.62(5) eV for CsCuCe 2 Se 4 and RbCuTb 2 Se 4 , respectively, and a work function of 4.83(5) eV for CsCuPr 2 Se 4 . Additionally, some n = 3 ACu 3 Ln 2 Qs compounds exhibit a negative phonon mode because of a copper atom coordination, which may distort to a trigonal planar geometry at sufficiently low temperatures. The dynamic instabilities and the predicted distortion in the copper tetrahedra for the n = 3 ACu 3 Ln 2 Q 5 compounds were found to have a linear relationship with the atomic number of the lanthanides and the electronegativity of the lanthanides. In conclusion, the A 2 Cu 2 n Ln 4 Q 7+n compounds can potentially find application as high-temperature thermoelectric materials and other semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Intrinsic magnetism in superconducting infinite-layer nickelates

The discovery of superconductivity in Nd 0.8 Sr 0.2 NiO 2 introduced a new family of layered nickelate superconductors that has now been extended to include a range of Sr-doping, Pr or La in place of Nd, and the 5-layer Nd 6 Ni 5 O 12 . A number of studies indicate that electron correlations are strong in these materials, and hence a central question is whether or not magnetism is present as a consequence of these interactions. Here we report muon spin rotation/relaxation studies of a series of superconducting infinite-layer nickelates. In all cases we observe an intrinsic magnetic ground state, regardless of the rare earth ion or doping, arising from local moments on the nickel sublattice. Further, the coexistence of magnetism - which is likely to be antiferromagnetic and short-range ordered - with superconductivity is reminiscent of some iron pnictides and heavy fermion compounds, and qualitatively distinct from the doped cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Rare Earth Nitrate Hybrid Double Perovskites [Me 4 N] 2 [MLn(NO 3 ) 6 ] (M = Na–Cs; Ln = La–Gd, ex. Pm)

An exploration of the synthetic and structural phase space of rare earth hybrid double perovskites A 2 B'BX 6 (A = organocation, B' = M + , B = M 3+ , X = molecular bridging anion) that include X = NO 3 – and B' = alkali metal is reported, complementing earlier studies of the [Me 4 N] 2 [KB(NO 3 ) 6 ] (B = Am, Cm, La–Nd, Sm–Lu, Y) (Me 4 N = (CH 3 ) 4 N + ) compounds. In the present efforts, the synthetic phase space of these systems is explored by varying the identity of the alkali metal ion at the B'-site. Herein, we report three new series of the form [Me 4 N] 2 [B'B(NO 3 ) 6 ] (B = La–Nd, Sm–Gd; B' = Na, Rb, Cs). The early members of the Na-series crystallize in the trigonal space group R3̅ from La to Nd where a phase transition occurs in the phase between 273 and 300 K, going from R3̅ to the high-symmetry, cubic space group Fm3̅m. The preceding trigonal members of the Na-series also undergo phase transitions to cubic symmetry at temperatures above 300 K, establishing a decreasing trend in the phase-transition temperature. The remainder of the Na-series, as well as the Rb- and Cs-series, all crystallize in Fm3̅m at 300 K. The temperature-dependent phase behavior of the synthesized phases is studied via variable-temperature spectroscopic methods and high-resolution powder X-ray diffractometry. All phases were characterized via single-crystal and powder X-ray diffraction and Fourier transform infrared (FT-IR) and Raman spectroscopic methods. These results demonstrate the versatility of the perovskite structure type to include rare earth ions, nitrate ions, and a suite of alkali metal ions and serve as a foundation for the design of functional rare earth hybrid double perovskite materials such as those possessing useful multiferroic, optical, and magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis and anisotropic magnetism in quantum spin liquid candidates A YbSe 2 ( A = K and Rb)

The quantum spin liquid (QSL) state in rare-earth triangular lattices has attracted much attention recently due to its potential application in quantum computing and communication. Here, we report the single-crystal growth synthesis, crystal structure characterizations, and magnetic properties of AYbSe 2 (A = K and Rb) compounds. The x-ray diffraction analysis shows that AYbSe 2 (A = K and Rb) crystallizes in a trigonal space group, R-3m (No. 166) with Z = 3. AYbSe 2 possesses a two-dimensional (2D) Yb–Se–Yb layered structure formed by edged-shared YbSe 6 octahedra. The magnetic properties are highly anisotropic for both title compounds, and no long-range order is found down to 0.4 K, revealing the possible QSL ground state in these compounds. The isothermal magnetization exhibits a one-third magnetization plateau when the magnetic fields are applied in the ab-plane. Heat capacity is performed along both ab-plane and c axis and features the characteristic dome for triangular magnetic lattice compounds as a function of magnetic fields. Due to the change in the interlayer and intralayer distance of Yb 3+ , the dome shifts to low fields from KYbSe 2 to RbYbSe 2 . All these results indicate that the AYbSe 2 family presents unique frustrated magnetism close to the possible QSL and noncollinear spin states.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rare-earth monopnictides: Family of antiferromagnets hosting magnetic Fermi arcs

We report since the discovery of topological insulators a great deal of research effort has been devoted to magnetic topological materials, in which nontrivial spin properties can be controlled by magnetic fields, culminating in a wealth of fundamental phenomena and possible applications. The main focus was on ferromagnetic materials that can host Weyl fermions and therefore spin-textured Fermi arcs. The recent discovery of Fermi arcs and new magnetic band splitting in the antiferromagnet (AFM) NdBi has opened up new avenues for exploration. Here we show that these uncharted effects are not restricted to this specific compound, but also emerge in CeBi and NdSb when they undergo paramagnetic to AFM transition. Our data show that the Fermi arcs in NdSb have twofold symmetry, leading to strong anisotropy that may enhance effects of spin textures on transport properties. Our findings thus demonstrate that the RBi and RSb series are materials that host magnetic Fermi arcs and may be a potential platform for modern spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Dehydration synthesis and crystal structure of terbium oxychloride, TbOCl

Terbium oxychloride, TbOCl, was synthesized via a simple heat-treatment of TbCl3·6H2O. The structure was determined using X-ray powder diffraction (XRD) data. The TbOCl compound crystallizes within the tetragonal P4/nmm space group, and its crystal structure is composed of alternating layers of (TbO)n and n Cl- anions. The unit cell parameters, volume, and density were compared to the literature data of other isostructural rare-earth oxychlorides in the P4/nmm space group and showed a good agreement when fitted to the calculated trendlines.

oxychloride, rare-earth oxyhalide, powder diffract↗
DOE OSTI2022

Quantifying uncertainties in crystal electric field Hamiltonian fits to neutron data

We systematically examine uncertainties from fitting rare earth single-ion crystal electric field (CEF) Hamiltonians to inelastic neutron scattering data. Using pyrochlore and delafossite structures as test cases, we find that uncertainty in CEF parameters can be large despite visually excellent fits. These results show Yb ^{3+} 3 + compounds have particularly large g g -tensor uncertainty because of the few available peaks. In such cases, additional constraints are necessary for meaningful fits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Nanotubes from the Misfit Layered Compound (SmS) 1.19 TaS 2 : Atomic Structure, Charge Transfer, and Electrical Properties

Misfit layered compounds (MLCs) MX-TX 2 , where M, T = metal atoms and X = S, Se, or Te, and their nanotubes are of significant interest due to their rich chemistry and unique quasi-1D structure. In particular, LnX-TX 2 (Ln = rare-earth atom) constitute a relatively large family of MLCs, from which nanotubes have been synthesized. The properties of MLCs can be tuned by the chemical and structural interplay between LnX and TX 2 sublayers and alloying of each of the Ln, T, and X elements. In order to engineer them to gain desirable performance, a detailed understanding of their complex structure is indispensable. MLC nanotubes are a relative newcomer and offer new opportunities. In particular, like WS 2 nanotubes before, the confinement of the free carriers in these quasi-1D nanostructures and their chiral nature offer intriguing physical behavior. High-resolution transmission electron microscopy in conjunction with a focused ion beam are engaged to study SmS-TaS 2 nanotubes and their cross-sections at the atomic scale. The atomic resolution images distinctly reveal that Ta is in trigonal prismatic coordination with S atoms in a hexagonal structure. Furthermore, the position of the sulfur atoms in both the SmS and the TaS 2 sublattices is revealed. X-ray photoelectron spectroscopy, electron energy loss spectroscopy, and X-ray absorption spectroscopy are carried out. These analyses conclude that charge transfer from the Sm to the Ta atoms leads to filling of the Ta 5d z 2 level, which is confirmed by density functional theory (DFT) calculations. Transport measurements show that the nanotubes are semimetallic with resistivities in the range of 10 –4 Ω·cm at room temperature, and magnetic susceptibility measurements show a superconducting transition at 4 K.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Growth Strategy of a Hybrid Yb3Rh4Sn13/LaRuSn3 Structure Type: Integrating Thermal Analysis, In Situ Diffraction, and Geometric Descriptors

Remeika phases form a versatile family of cage like intermetallics built from transition metal–centered trigonal prisms linked into three dimensional frameworks that generate two characteristic voids: a large [AX₁₂] cuboctahedral cage hosting the rare earth ion and an [XX′₁₂] icosahedral cage accommodating the tetrel atom. In this work, we present a tool driven approach for targeted solid state synthesis of Remeika phases, integrating differential scanning calorimetry, in situ neutron diffraction, and a geometric tolerance factor that quantifies rare earth size compatibility within these polyhedral cages. When combined with arc melting and metallic flux crystal growth, this framework enables prediction, verification, and isolation of specific Remeika phases. Applying this strategy, we obtain single crystals of the predicted pseudo-perovskite Fe based Remeika compound Yb0.9FeGe3.1. More broadly, this perspective highlights how coupling real time structural probes with simple geometric descriptors provides a general pathway for designing synthesis conditions and accessing potentially metastable structure types in complex intermetallic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accelerating the discovery of novel magnetic materials using machine learning–guided adaptive feedback

Magnetic materials are essential for energy generation and information devices, and they play an important role in advanced technologies and green energy economies. Currently, the most widely used magnets contain rare earth (RE) elements. An outstanding challenge of notable scientific interest is the discovery and synthesis of novel magnetic materials without RE elements that meet the performance and cost goals for advanced electromagnetic devices. Here, we report our discovery and synthesis of an RE-free magnetic compound, Fe 3 CoB 2 , through an efficient feedback framework by integrating machine learning (ML), an adaptive genetic algorithm, first-principles calculations, and experimental synthesis. Magnetic measurements show that Fe 3 CoB 2 exhibits a high magnetic anisotropy ( K 1 = 1.2 MJ/m 3 ) and saturation magnetic polarization ( J s = 1.39 T), which is suitable for RE-free permanent-magnet applications. Our ML-guided approach presents a promising paradigm for efficient materials design and discovery and can also be applied to the search for other functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis of a series of rare-earth-based multi-anion chalcogenide iodides RE 3 Si 2 Se x S 8− x I (RE = La, Ce, Pr, and Nd) using the flux-assisted boron–chalcogen mixture method

Single crystals and polycrystalline powders of rare earth mixed chalcogenide iodides La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, Pr 3 Si 2 Se 1.22 S 6.78 I, and Nd 3 Si 2 Se 1.18 S 6.82 I were prepared using the reactive flux-assisted boron–chalcogen mixture (BCM) method at 850 °C. All compounds crystallized in the monoclinic crystal system, space group C2/c (space group number 15). The series adopts the La 3 Si 2 O 8 Cl structure type, containing isolated SiQ 4 tetrahedra connected by REQ 8 (RE = La, Ce, Pr and Nd) polyhedra; this arrangement creates tunnels that are filled by I atoms. The partial substitution of S by Se was carried out to modulate the optical properties. Phase pure samples and uniform solid solutions were obtained for all compositions as determined using powder X-ray diffraction patterns. Polycrystalline powders were used for physical property measurements, including magnetic susceptibility and UV-Vis diffuse reflectance. The solid-state UV-Vis data for the polycrystalline La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, and Pr 3 Si 2 Se 1.22 S 6.78 I samples revealed band gaps of E g = 2.5(1), 2.2(1), and 2.3(1) eV, typical of semiconductors. Magnetic measurements indicated that Ce 3 Si 2 Se 1.39 S 6.61 I and Nd 3 Si 2 Se 1.18 S 6.82 I exhibit paramagnetic behavior with slightly negative Weiss constants θ = −25 and −38. The photoluminescence spectrum of Ce 3 Si 2 Se 1.39 S 6.61 I exhibits a broad emission band around ∼493 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Potential high-performance magnet materials: Co- and Al-alloyed Sm 2 Fe 17

Sm 2 Fe 17 has long been known as a potential high-performance magnet whose deficiencies—planar anisotropy and lower-than-optimal T c —can be remedied by nitrogen addition, but which presents synthesis difficulties. In this work, we apply first-principles calculations to search for alternative low-cost, high-performance permanent magnets in this family, by exploring simultaneous Fe and Al substitution. Specifically, the goal is to improve properties of Sm 2 Fe 14 Al 3 easy-plane magnet at the stoichiometric composition. Density functional theory calculations were executed for three series of compounds, i.e., Sm 2 (Fe 1-x Co x ) 14 Al 3 , Sm 2 (Fe 1-x Co x ) 15 Al 2 , and Sm 2 (Fe 1-x Cox) 16 Al. We find that substitution of Fe with 12–18 of Co in % Sm 2 Fe 14 Al 3 modifies the magnetic anisotropy type from easy plane to easy axis with a substantial anisotropy of 7.1 MJ/m 3 . We also demonstrate that the largest part of magnetic anisotropy is introduced by 4f Sm atom electrons. Thus the rotation of magnetic moment orientation from $\langle$$1\bar10$$\rangle$ to $\langle$111$\rangle$ is followed by an increase of the occupied 4f state number and, as a result, the orbital part of the magnetic moment of one of the Sm atoms. This increase of the occupied 4f state number at an energy ~ -4.3 eV results in a significant reduction of band structure energy. The substitution of Fe by Co does not significantly reduce the magnetization of the compound and keeps it slightly above 1 T. This combination of magnetic anisotropy and magnetization makes the compound a promising candidate for a permanent magnet.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced Phase Stability of Sm 2 (Fe, Al) 17 C x

Aluminum doping can improve the phase stability of metastable compound Sm 2 Fe 17 C x with a high carbon content (x > 1.5). We investigated the preferential site substitution of Al, chemical bonding, and structural stability in Sm 2 (Fe,Al) 17 C 3 using first-principle calculations. Our results reveal a strong correlation between the preferential substitution of Fe by Al and the atomic site chemical environment, which affects the overall phase stability. Specifically, Al preferentially occupies the 9d site in Sm 2 (Fe,Al) 17 C 3 . At the same time, Al prefers the site 6c in its parent phase Sm 2 (Fe,Al) 17 . Partial replacement of Fe with Al leads to a more negative formation energy, indicating enhanced thermodynamic stability. Crystal Orbital Hamilton Population (COHP) and Crystal Orbital Bond Index (COBI) analysis suggest that insertion of carbon weakens the bonding strength of Sm-Fe (18f) and Sm-Fe (18h), resulting in metastability of Sm 2 Fe 17 C x . Doping Al strengthens Al-Fe, Al-Sm, Sm-Fe (18f, 18h) and Fe–C bonding in Sm 2 (Fe,Al) 17 C 3 , as revealed by calculated COHP and COBI. These effects contribute to improved phase stability in the Al-doped 2:17 interstitial compound.

chemical bonding↗