Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reaction mechanism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unraveling the Nature of Excellent Potassium Storage in Small-Molecule Se@Peapod-Like N-Doped Carbon Nanofibers

The potassium-selenium (K-Se) battery is considered as an alternative solution for stationary energy storage because of abundant resource of K. However, the detailed mechanism of the energy storage process is yet to be unraveled. In this work, the findings in probing the working mechanism of the K-ion storage in Se cathode are reported using both experimental and computational approaches. A flexible K-Se battery is prepared by employing the small-molecule Se embedded in freestanding N -doped porous carbon nanofibers thin film (Se@NPCFs) as cathode. The reaction mechanisms are elucidated by identifying the existence of short-chain molecular Se encapsulated inside the microporous host, which transforms to K 2 Se by a two-step conversion reaction via an "all-solid-state" electrochemical process in the carbonate electrolyte system. Through the whole reaction, the generation of polyselenides (K 2 Se n , 3 ≤ n ≤ 8) is effectively suppressed by electrochemical reaction dominated by Se-2 molecules, thus significantly enhancing the utilization of Se and effecting the voltage platform of the K-Se battery. This work offers a practical pathway to optimize the K-Se battery performance through structure engineering and manipulation of selenium chemistry for the formation of selective species and reveal its internal reaction mechanism in the carbonate electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2021

Effect of operating parameters on H 2 /CO 2 conversion to methanol over Cu-Zn oxide supported on ZrO 2 polymorph catalysts: Characterization and kinetics

Kinetic aspects of the operating parameters for the catalytic conversion of H 2 /CO 2 to methanol over two novel catalysts were evaluated to understand the effect of the polymorphic ZrO 2 phase composed of Cu 0/+ -ZnO sites at the atomic level and its impact on the reaction mechanism. The catalysts were characterized by in situ and ex-situ XRD, N 2 adsorption/desorption isotherms, FRX, TPR, TPD-N 2 O, in situ XANES, TPD-CO 2 , and in situ DRIFTS techniques. The influence of different reaction variables such as the GHSV, temperature, pressure, and H 2 /CO 2 ratio were studied using a fixed bed continuous plug flow reactor. The Cu-ZnO catalyst supported on the tetragonal zirconia polymorph exhibited the highest methanol yield due to the lower activation energy when compared to the catalyst with a greater amount of the monoclinic phase. In addition, the catalysts were reused for 8 cycles of 6 hours to evaluate their stability, which can translate into lower costs for large-scale methanol production. As a result, the estimation of the kinetic parameters over Cu-Zn oxide supported on ZrO 2 polymorphs was significant for understanding the reaction mechanism, as well as to provide a pathway for scaling-up of the process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Kinetic studies of excited singlet oxygen atom O( 1 D) reactions with ethanol

In this work, themultichannel reaction of excited singlet oxygen atom with ethanol, O( 1 D) + C 2 H 5 OH (1), was studied in a photolysis flow reactor coupled with mid-infrared Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS) at 297 K with reactor pressures of 60, 120, and 150 Torr (bath He). The excited singlet oxygen atom was generated through the photolysis of O 3 at 266 nm. The photon flux and O( 1 D) concentrations were determined by in situ actinometry based on O 3 depletion. Temporal profiles of OH and H 2 O were monitored via DAS signals at ca. 3568.62 and 3568.29 cm –1 , while temporal profiles of HO 2 were measured via FRS signals at ca. 1396.90 cm –1 . The branching ratios of the target reaction (1) were determined by fitting temporal profiles to simulations from an in-house reaction mechanism. Two major reaction channels were identified as CH 3 CHOH + OH and CH 3 O + CH 2 OH, and their branching ratios were determined as 0.46 ± 0.12 and 0.42 ± 0.11, respectively. A specific HO 2 + RO 2 reaction between HO 2 and O 2 CH 2 CH 2 OH (β-RO 2 ) at the low-temperature range is estimated in this work as HO 2 + O 2 CH 2 CH 2 OH → products with a rate constant of 7 × 10 –12 cm 3 molecule –1 s –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of Ni Dopant on Furan Activation over Mo 2 C Surface: Insights from First-Principles-Based Microkinetic Modeling

Here, the role of Ni dopant in a molybdenum carbide (Mo 2 C) catalyst for butadiene and propyne production from furan is investigated by using a Mo 2 C(001) surface model and first-principles-based microkinetic modeling (MKM). A reaction mechanism including 18 reaction steps is generated to compute the turnover frequency (TOF) of butadiene and propyne from furan gas. The butadiene production is dominant with the TOF being 3-6 orders of magnitude higher than the TOF of propyne on a bare Mo 2 C surface due to an active C-O bond scission reaction compared to C-C bond cleavage reaction. The exothermic binding of ring-opened furan (CHCHCHCHO*) inhibits the activity of a bare Mo 2 C surface for butadiene and propyne production. Calculations predict that Mo 2 C surface modification with a Ni dopant energetically destabilizes the adsorption of CHCHCHCHO*, which facilitates the formation of butadiene and propyne. In the presence of Ni dopants on a Mo 2 C(001) surface, the selectivity toward the butadiene formation is decreased compared to propyne due to relatively favorable C-C bond scission as opposed to the C-O bond scission. This first-principles-based study provides mechanistic and kinetic insights into the role of dopants in cost-efficient Mo 2 C catalysts during the vapor phase conversion of furan to gaseous products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Site Diversity and Mechanism of Metal–Exchanged Zeolite Catalyzed Non–Oxidative Propane Dehydrogenation

Metal-exchanged zeolites are well-known propane dehydrogenation (PDH) catalysts; however, the structure of the active species remains unresolved. In this review, existing PDH catalysts are first surveyed, and then the current understanding of metal-exchanged zeolite catalysts is described in detail. The case of Ga/H-ZSM-5 is employed to showcase that advances in the understanding of structure–activity relations are often accompanied by technological or conceptional breakthroughs. The understanding of Ga speciation at PDH conditions has evolved owing to the advent of in situ/operando characterizations and to the realization that the local coordination environment of Ga species afforded by the zeolite support has a decisive impact on the active site structure. In situ/operando quantitative characterization of catalysts, rigorous determination of intrinsic reaction rates, and predictive computational modeling are all significant in identifying the most active structure in these complex systems. The reaction mechanism could be both intricately related to and nearly independent of the details of the assumed active structure, as in the two main proposed PDH mechanisms on Ga/H-ZSM-5, that is, the carbenium mechanism and the alkyl mechanism. Perspectives on potential approaches to further elucidate the active structure of metal-exchanged zeolite catalysts and reaction mechanisms are discussed in the final section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into the Catalytic Condensation of Methyl Ketones on MgO Surfaces

Ketone coupling via aldol condensation is one of the promising routes to produce cyclic and value-added precursors for renewable hydrocarbon biofuels. A first-principles-based microkinetic modeling is performed to evaluate the surface-mediated reaction mechanisms and the role of water molecules in the observed activities for 2-pentanone and 3-pentanone aldol condensation on dehydroxylated MgO(111) surface and hydroxylated terminated surface[OH-MgO(111)]. Here, we have identified the enhancement of the surface OH group to MgO(111) surface catalytic activity by destabilizing the binding strength of reaction intermediates and reducing the energy barriers of rate-determining steps(proton transfer and dehydration steps). The 2-pentanone has one elementary step less in the complete reaction mechanism of aldol condensation and preferable energy barrier for proton transfer and dehydration steps, revealing 2-pentanone as terminal ketone is more reactive than 3-pentanone as central ketone. The water molecules dominated the OH-MgO( 111) surface after further addition of water, leading to the reduction of turnover frequency of the aldol condensation dimer product as the loss of aldol condensation reaction intermediates in competitive adsorption with water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemical Differences between Phenolic Secondary Organic Aerosol Formed through Gas-Phase and Aqueous-Phase Reactions

Phenolic compounds, which are significant emissions from biomass burning (BB), undergo rapid photochemical reactions in both gas and aqueous phases to form secondary organic aerosol, namely, gasSOA and aqSOA, respectively. The formation of gasSOA and aqSOA involves different reaction mechanisms, leading to different product distributions. In this study, we investigate the gaseous and aqueous reactions of guaiacol a representative BB phenol to elucidate the compositional differences between phenolic aqSOA and gasSOA. Aqueous-phase reactions of guaiacol produce higher SOA yields than gas-phase reactions (e.g., roughly 60 vs 30% at one half-life of guaiacol). These aqueous reactions involve more complex reaction mechanisms and exhibit a more gradual SOA evolution than their gaseous counterparts. Initially, gasSOA forms with high oxidation levels (O/C > 0.82), while aqSOA starts with lower O/C (0.55–0.75). However, prolonged aqueous-phase reactions substantially increase the oxidation state of aqSOA, making its bulk chemical composition closer to that of gasSOA. Additionally, aqueous reactions form a greater abundance of oligomers and high-molecular-weight compounds, alongside a more sustained production of carboxylic acids. AMS spectral signatures representative of phenolic gasSOA have been identified, which, together with tracer ions of aqSOA, can aid in the interpretation of field observation data on aerosol aging within BB smoke. The notable chemical differences between phenolic gasSOA and aqSOA highlighted in this study also underscore the importance of accurately representing both pathways in atmospheric models to better predict the aerosol properties and their environmental impacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating the Link Between Alkali Metal Ions and Reaction-Transport Mechanisms in Cathode Electrodes for Alkali-ion Batteries

Our long-term goal is to improve the reliability of electrode materials and their ability to transport and store various metal ions for electrochemical energy storage applications. The main objective of this work was to investigate the intrinsic relationship between the role of alkali metal ions and electrochemically driven mechanical stability and kinetic properties of battery materials. The overall question was “What is the role of alkali metal ions on the electrochemical and mechanical behavior of cathode electrodes? Our guiding hypothesis was that intercalation of larger alkali metal ions (Na and K) inevitably alters the coupled transport-reaction processes during battery operation in organic electrolytes, leading to more intensive chemo-mechanical instabilities in cathode electrodes, resulting in rapid capacity fade. To validate the hypothesis, we experimentally characterized the reaction-transport processes and governing forces driving the instability of electrode materials in different alkali metal-ion environments. The project had three main tasks. The first one was to investigate intercalation-induced strains and associated stress generation, and their impact on structural deformations in composite cathode electrodes. The second task focused on identifying potential-dependent dynamic changes in the electrode-electrolyte interface in alkali metal ion batteries. The last task was focused on determining how larger alkali metal ions with slower diffusivity affect the transport-mechanics coupling at faster scan rates, compared to smaller ions with faster diffusivity in electrodes. We shortly provided the outcome of each task in the accomplishment section. This project produced 10 peer-reviewed publications (9 research papers and one review manuscript) and supported two Ph.D. students, who graduated from Oklahoma State University.

25 ENERGY STORAGE↗
DOE OSTI2023

Insights into Active Sites and Mechanisms of Benzyl Alcohol Oxidation on Nickel–Iron Oxyhydroxide Electrodes

The electrochemical oxidation of bio-derived molecules has recently garnered interest for its potential in opening electrified synthetic pathways toward value-added products. Herein, we investigate the electrochemical conversion of benzyl alcohol (BA) to benzaldehyde and benzoate on nickel–iron (Fe ~ 7–18%) electrodes as a model system to understand reaction mechanisms and environmental conditions that can transform these molecules. Our results indicate a strong correlation between benzyl alcohol oxidation (BAO) onset potentials and Ni(II/III) redox peak positions, highlighting the potential role that lower oxidation states of nickel, i.e., Ni 3+ , can play in BAO catalysis. Our work on the Ni 2+/3+ system complements mechanisms that involve higher oxidation states of Ni as reported by others. We note that the Ni redox position and thus BAO onset is impacted by Fe incorporation during electrochemistry from unpurified electrolytes, which can resemble standard reactor operating conditions. We perform a systematic computational investigation into BAO and provide density functional theory (DFT) insights into how the redox mechanism has been such a prominent focus of alcohol oxidations. This includes the mode of BA adsorption and the nature of the adsorption site; upon conversion of the Ni 2+ surface to active Ni 3+ via hydroxyl deprotonation, BAO is thermodynamically downhill. Our DFT study also introduces the possibility of a vacancy-driven mechanism, though expected to be less prevalent during catalysis than the redox mechanism for a Ni 3+ surface. Through the systematic investigation of experimental reaction conditions and computational free energy thermodynamics, we have gained valuable insights into BAO reaction mechanisms that inform catalytic activity. Our study opens avenues for further design and development of catalyst active sites for the oxidation of related organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Role of Hydrogen-bonded Bimolecular Formic Acid–Formate Complexes for Formic Acid Decomposition on Copper: A Combined First-Principles and Microkinetic Modeling Study

Hydrogen bonding interactions alter the nanoscale reaction mechanisms of many chemistries. Yet, it remains unclear how they affect heterogeneously catalyzed decomposition of formic acid (FA), a reaction of intense interest since FA is a promising hydrogen carrier. In this work, we elucidate how hydrogen bonding affects the reaction mechanisms for FA decomposition on Cu(111) by combining first-principles density functional theory calculations to calculate reaction energetics, Latin-hypercube sampling to elucidate stable high-coverage adsorbate configurations, and coverage self-consistent mean-field microkinetic models to predict reaction kinetics. We demonstrate that hydrogen-bonded complexes of FA with formate (bimolecular FA–HCOO complexes) can play a dominant role in FA decomposition. Specifically, our first-principles calculations show that hydrogen bonding of FA with HCOO may stabilize the crucial monodentate HCOO intermediate and the transition states for HCOO decomposition, especially at low coverages. We predict that, depending on the reaction conditions, 40–80% of the reaction flux goes through pathways involving the bimolecular FA–HCOO complexes. Additionally, the active site for FA decomposition on Cu(111) involves a high coverage (~0.4 monolayers (ML)) of these complexes, which unexpectedly stabilize intermediates and transition states via van der Waals interactions. Our work provides molecular insights consistent with previous experimental observations on supported Cu/Al 2 O 3 catalysts. This paves the way toward the development of novel catalysts for FA decomposition as well as for other industrially important chemistries with intermediates capable of hydrogen bonding, such as ammonia electrooxidation and CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evaluation of the lgnitability Hazards in Remediated Nitrate Salt Waste

The hazards associated with the characteristic of ignitability in remediated nitrate salt (RNS) waste containing nitric acid (HNO 3 ) and metal nitrate salts, currently stored at the Waste Control Specialists (WCS) facility near Andrews, Texas have been evaluated. For these waste drums there are two ignitability hazards that may apply, each separately distinguished from the other and uniquely correlated to one of two competing reaction mechanisms. One ignitability hazard, designated the autocatalytic thermal runway, is uniquely correlated to an acid/base reaction of hydrolysis of a hydrated metal nitrate salt. The other applicable ignitability hazard, designated the oxidizer property, is uniquely correlated to a redox disproportionation reaction involving an anhydrous metal nitrate salt. Which reaction mechanism pathway is accessible to a given metal nitrate, and therefore which ignitability hazard may apply, depends on the acidity of the metal ion and its corresponding capacity to maintain coordination with water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Verification and Benchmarking of High Fidelity Physics Peat Smoldering Model

Peat fires are a major contributor to greenhouse gas emissions. The estimates of these emissions currently contain major uncertainties, due to the difficulty of determining the mass of peat burned in a fire. To address these uncertainties, we develop a computational physics-based peat smoldering model, which will be leveraged for high-fidelity quantitative estimates of peat fire emissions relevant to climate change. We present the verification of the 2-D axisymmetric model, a first step towards developing a full 3-D model. Verification includes the solution verification against a literature model for the 0-D smoldering case and verification of the heat transfer problem in 1-D and 2-D. Also presented is the effect of reaction mechanism on the smoldering model, for which we found a relatively simple three-step reaction mechanism is able to capture key behavior. These verification results provide the foundation for moving forward with validation against experimental data of the 2-D model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Unveiling the mechanism of the photocatalytic reduction of CO 2 to formate promoted by porphyrinic Zr-based metal–organic frameworks

A complete picture of the reaction mechanism responsible for the photocatalytic reduction of CO 2 into formate promoted by the Zr-based porphyrinic MOF-545 (PCN-222) in acetonitrile/triethanolamine (CH 3 CN/TEOA) solutions is provided for the first time by combining experimental and computational approaches. Firstly, we combined the metalation of the porphyrin linkers and the synthesis under microwave conditions of nano-sized materials (150–200 nm) to reach one of the highest CO 2 RR activities under visible light irradiation reported so far for a MOF-based catalyst in terms of formate production (identified in all cases as the sole product), i.e., 6000 μmol g –1 after 4 h for the NanoMOF-545(Fe). A thorough mechanistic study of CO 2 RR is provided afterwards, which elucidated the respective roles of TEOA, porphyrin linkers and Zr 6 -nodes. Photophysical measurements of both metalated and unmetalated MOFs excluded the prevailing belief of ligand-to-Zr 6 cluster charge-transfer state formation, while bulk photolysis proved that the porphyrinic linkers of the MOF promote the photooxidation of TEOA under catalytic conditions. DFT calculations allowed characterization with atomistic detail of a novel reaction mechanism whereby TEOA˙ radicals generated photochemically at the porphyrinic linkers play the crucial role of transferring a formal hydride to a CO 2 molecule activated on a Zr IV center, which acts as a Lewis acid. Notably, this mechanism backed by additional experimental assays explains the experimental activity trends observed upon metalation, on the basis of the ability of the materials to accomplish the photo-oxidation of TEOA. Here, while elucidating the reaction pathways at work in Zr 6 -based MOFs with chromophore linkers, the findings reported herein pinpoint new mechanistic features capable of rationalizing other light-driven reactions making use of TEOA (or structurally related donors) and ultimately, inspire the bottom-up design of new catalysts and catalytic routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The NO reduction by CO over NiO x /CeO 2 catalysts with a fixed Ni surface density: pretreatment effects on the catalyst structure and catalytic activity

NiO x /CeO 2 catalysts have shown promising results in various catalytic reactions, including the NO reduction by CO. Here, in this study, we investigated the effect of oxidation and reduction treatments on the NO reduction by CO over pretreated NiO x /CeO 2 catalysts. A series of oxidized and reduced supported NiO x catalysts were synthesized in two steps: (1) the pretreatment of CeO 2 supports at different temperatures (400, 500, and 700 °C) under oxidizing and reducing conditions and (2) the synthesis of NiO x /CeO 2 catalysts by an incipient wetness impregnation method (IWI) with a fixed surface density of 5.3 Ni per nm 2 under specific conditions (oxidation/reduction) applied during the CeO 2 treatment. The prepared catalysts were characterized via BET, ICP/OES, Raman, XPS, and XRD to understand their physicochemical properties. The results showed that as the pretreatment temperature increased, the physicochemical properties of NiO x /CeO 2 catalysts were changed: a decreased specific surface area (SSA), decreased oxygen vacancy/defect sites, and an increased crystallite size. The oxidized NiO x /CeO 2 catalyst at a lower pretreatment temperature displayed a better catalytic activity, indicating that the physicochemical properties of the catalysts were key factors in enhancing the catalytic activity. To understand the intermediate species and reaction mechanism during the NO reduction by CO, an in situ DRIFTS study was performed and a possible reaction mechanism was also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multimetallic Metal-Organic Frameworks as Heterogeneous Catalysts for Gas Phase Hydroformylation and Hydrogenation Reactions

This project focused on the development bimetallic metal-organic frameworks (MOFs) as gas phase heterogeneous catalysts for hydrogenation and hydroformylation reactions. MOFs are a new class of hybrid inorganic/organic materials that are highly crystalline, with structures consisting of metal nodes of specific geometries connected by organic linkers. Although there have been a number of studies of catalysis at MOF nodes in solution, there is little experimental data in the literature for gas phase reactions despite the fact that industrial heterogeneous catalysis on MOFs is more economically viable than homogeneous catalysis. The use of MOFs as heterogeneous catalysts presents the unique opportunity to carefully control the composition, geometry and ensemble sizes of the active sites, which are all critical factors for the rational design of new catalysts. Specific objectives of the project are as follows: (1) to tailor the geometry, composition and ensemble size of the active sites; (2) to understand how the adsorption of molecules at metal sites can be modified by interactions with a neighboring metal site; (3) to determine how oxidation states of the metal change during reaction and how these states can be modified by metal-metal electronic interactions; and (4) to elucidate reaction mechanisms and intermediates. For these studies, we have chosen to investigate selective hydrogenation of hydrocarbons and hydroformylation, which are industrially relevant reactions. Our interdisciplinary team of Chen, Shustova and Vogiatzis/Henkelman provides critical expertise in novel MOF synthesis (Shustova), atomic-scale surface science and catalysis (Chen) and computational studies of reaction mechanisms (Vogiatzis/Henkelman) that are necessary for the development of these catalysts. We believe that this work will lead directly to the rational design of new catalysts that are versatile, highly active/selective and suitable for industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Support Effect and Surface Reconstruction in In 2 O 3 / m- ZrO 2 Catalyzed CO 2 Hydrogenation

Here, we investigate the chemical and structural dynamics at the interface of In 2 O 3 /m-ZrO 2 and their consequences on the CO 2 hydrogenation reaction (CO 2 HR) under reaction conditions. While acting to enrich CO 2 , monoclinic zirconia (m-ZrO 2 ) was also found to serve as a chemical and structural modifier of In 2 O 3 that directly governs the outcome of the CO 2 HR. These modifying effects include the following: (1) Under reaction conditions (above 623 K), partially reduced In 2 O 3 , i.e., InO x (0 < x < 1.5), was found to migrate in and out of the subsurface of m-ZrO 2 in a semireversible manner, where m-ZrO 2 accommodates and stabilizes InO x by serving as a reservoir. The decreased concentration of surface InO x under elevated temperatures coincides with significantly decreased selectivity toward methanol and a sharp increase of the reverse water–gas shift reaction. The reconstruction-induced variation of InO x concentration appears to be one of the most important factors contributing to the altered catalytic performance of CO 2 HR at different reaction conditions. (2) The strong interactions and reactions between m-ZrO 2 and In 2 O 3 result in the activation of a pool of In–O bonds at the In 2 O 3 /m-ZrO 2 interface to form oxygen vacancies. On the other hand, the high dispersity of In 2 O 3 nanostructures onto m-ZrO 2 prevents their over-reduction under catalytically relevant conditions (up to 673 K), when bare In 2 O 3 is unavoidably reduced into the metallic phase (In 0 ). The relationship between the extent of reduction of In 2 O 3 and catalytic performance (CO 2 conversion, CH 3 OH selectivity, or yield of CH 3 OH) suggests the presence of an optimum coverage of surface InO x and oxygen vacancies under reaction conditions. The conventional model that links catalytic performance solely to the coverage of oxygen vacancies appears invalid in the present case. In situ analysis also allows the observation of surface reaction intermediates and their interconversions, including the reduction of CO 3 * into formate, a precursor for the formation of methanol and CO. The combinative ex situ and in situ study sheds light on the reaction mechanism of the CO 2 HR on In 2 O 3 /m-ZrO 2 -based catalysts. Our findings on the large-scale surface reconstructions, support effect, and the reaction mechanism of In 2 O 3 /m-ZrO 2 for CO 2 HR may apply to other related metal oxide catalyzed CO 2 reduction reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct functionalization of C-H bonds by electrophilic anions

Bond formation between two of the most inert molecules, alkanes and [B12X12]2- (X = Cl, Br), is performed in a two step process. Fragmentation of [B12X12]2- in the gas phase generates highly reactive [B12X11]- ions which spontaneously react with alkanes. The reaction mechanism was investigated using tandem mass spectrometry and gas-phase vibrational spectroscopy combined with electronic structure calculations. This effort revealed the unprecedented and counterintuitive electrophilic substitution of a proton in an alkane by a negatively charged ion resulting in a B-C bond formation. The product is a dianionic [B12X11CnH2n+1]2- species, in which H+ is electrostatically bound to the dianion. High flux ion soft-landing was performed to co-deposit [B12X11]- and complex organic molecules (phthalates) in thin layers on surfaces. Molecular structure analysis of the product films revealed that C-H functionalization by [B12X11]- occured in the presence of other more reactive functional groups. This observation demonstrates the utility of highly reactive fragment ions for defined bond formation processes and may pave the way to the use of gas phase ion chemistry for chemical synthesis in the condensed phase.

Warneke, Jonas↗