Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rejection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Cost optimization of low-salt-rejection reverse osmosis

Low-salt-rejection reverse osmosis (LSRRO) is an emerging membrane-based desalination technology for concentrating brines with potentially lower energy consumption and cost than thermally driven processes. We assess the technoeconomic performance of LSRRO by using an optimization model that minimizes the levelized cost of water (LCOW). We develop detailed models for the RO module and other equipment using WaterTAP (Water treatment Technoeconomic Assessment Platform), an open-source simulation and optimization software for water treatment. We improve upon previous LSRRO cost optimization studies by optimizing the salt permeability for each stage, which has significant implications for technoeconomic performance. We present the cost-optimal design, operation, and performance for three cases: 35 g/L TDS feed at 70% recovery, 70 g/L at 55%, and 125 g/L at 35%. The cost-optimal LCOW and specific energy consumption (SEC) for these cases are 0.70, 1.89, and 7.41 $/m 3 and 3.9, 8.4, and 30.4 kWh/m 3 , respectively. For each case, we use sensitivity analyses to provide guidance on key factors that impact economic viability. We also present the cost-optimal LCOW and SEC for feed concentrations between 5 and 220 g/L TDS and recoveries between 30 and 90%. So, we compare LSRRO to other high-salinity desalination technologies and find that it may be cost-competitive below feed concentrations of 125 g/L.

54 ENVIRONMENTAL SCIENCES↗

Recovering high-purity uranyl nitrate from simulated used nuclear fuel dissolver solutions by crystallization: rejecting technetium

The separation of U from Tc and other problematic fission product elements like Mo and Ru, along with Sr, Zr, Cs, and Nd, has been achieved via the crystallization of uranyl nitrate hexahydrate (UNH). Rejection of technetium as pertechnetate anion ( 99 TcO 4 – ) is an especially important feature of this system, as it otherwise tends to follow U (VI) in extractive separations. It also raises the salient question regarding why this oxoanion cannot replace nitrate within the crystalline lattice of UNH. Results showed high-yield (>90 %), high-purity (>99 %) recovery of U as UNH from solutions containing 99 TcO 4 – by simple reduction of temperature from 60°C to 20°C. There was no observable interaction of 99 TcO 4 – with UO 2 2+ . The addition of other cations like, Sr 2+ , Zr 4+ , Cs + , and Nd 3+ , also did not form secondary, contaminant solid phases, leaving the > 99 % of the fission product elements in the mother liquor, while the U was recovered at > 90 %. Similarly, Mo and Ru, when added to the mixture, were shown to behave as the other fission-product elements, remaining in the mother liquor during crystallization. As a result, DFT calculations showed that, despite the higher binding strength of TcO 4 – , HMoO 4 – , and BiO 3 – with the UO 2 2+ cation compared to NO 3 – , the hydrogen-bonding network of the two coordinated ions and four waters of hydration in the UNH crystal structure is the driving force for the high specificity of this separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pyrolysis behavior of different type of materials contained in the rejects of packaging waste sorting plants

Highlights: Black-Right-Pointing-Pointer Study of the influence of materials in the pyrolysis of real plastic waste samples. Black-Right-Pointing-Pointer Inorganic compounds remain unaltered. Black-Right-Pointing-Pointer Cellulosic components give rise to an increase in char formation. Black-Right-Pointing-Pointer Cellulosic components promote the production of aqueous phase. Black-Right-Pointing-Pointer Cellulosic components increase CO and CO{sub 2} contents in the gases. - Abstract: In this paper rejected streams coming from a waste packaging material recovery facility have been characterized and separated into families of products of similar nature in order to determine the influence of different types of ingredients in the products obtained in the pyrolysis process. The pyrolysis experiments have been carried out in a non-stirred batch 3.5 dm{sup 3} reactor, swept with 1 L min{sup -1} N{sub 2}, at 500 Degree-Sign C for 30 min. Pyrolysis liquids are composed of an organic phase and an aqueous phase. The aqueous phase is greater as higher is the cellulosic material content in the sample. The organic phase contains valuable chemicals as styrene, ethylbenzene and toluene, and has high heating value (HHV) (33-40 MJ kg{sup -1}). Therefore they could be used as alternative fuels for heat and power generation and as a source of valuable chemicals. Pyrolysis gases are mainly composed of hydrocarbons but contain high amounts of CO and CO{sub 2}; their HHV is in the range of 18-46 MJ kg{sup -1}. The amount of CO-CO{sub 2} increases, and consequently HHV decreases as higher is the cellulosic content of the waste. Pyrolysis solids are mainly composed of inorganics and char formed in the process. The cellulosic materials lower the quality of the pyrolysis liquids and gases, and increase the production of char.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Funding for NSF underground laboratory is rejected

The Deep Underground Science and Engineering Laboratory (DUSEL), which proponents hope could provide a niche for the US particle-physics community, faces a shutdown as early as 1 April; the National Science Board (NSB) has rejected $19 million in funding needed to keep the project going through the fall of this year. The lab is housed in a disused gold mine in South Dakota's Black Hills.

54 ENVIRONMENTAL SCIENCES↗

Efficient rejection-based simulation of biochemical reactions with stochastic noise and delays

We propose a new exact stochastic rejection-based simulation algorithm for biochemical reactions and extend it to systems with delays. Our algorithm accelerates the simulation by pre-computing reaction propensity bounds to select the next reaction to perform. Exploiting such bounds, we are able to avoid recomputing propensities every time a (delayed) reaction is initiated or finished, as is typically necessary in standard approaches. Propensity updates in our approach are still performed, but only infrequently and limited for a small number of reactions, saving computation time and without sacrificing exactness. We evaluate the performance improvement of our algorithm by experimenting with concrete biological models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin decoherence in n-type GaAs: The effectiveness of the third-body rejection method for electron-electron scattering

We study the spin decoherence in n-type bulk GaAs for moderate electronic densities at room temperature using the Ensemble Monte Carlo method. We demonstrate that a technique called “third-body rejection method” devised by B. K. Ridley, J. Phys. C: Solid State Phys. 10, 1589 (1977) can be successfully adapted to Ensemble Monte Carlo method and used to tackle the problem of the electron-electron contribution to spin decoherence in the parameter region under study, where the electron-electron interaction can be reasonably described by a Yukawa potential. This scattering technique is employed in a doping region where one can expect that multiple collisions may play a role in carrier dynamics. By this technique, we are able to calculate spin relaxation times which are in very good agreement with the experimental results found by Oertel et al., Appl. Phys. Lett. 93, 13 (2008). Through this method, we show that the electron-electron scattering is overestimated in Born approximation, in agreement with previous results obtained by C. A. Kukkonen and H. Smith, Phys. Rev. B 8, 4601 (1973).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-channel lock-in amplifier assisted femtosecond time-resolved fluorescence non-collinear optical parametric amplification spectroscopy with efficient rejection of superfluorescence background

Superfluorescence appears as an intense background in femtosecond time-resolved fluorescence noncollinear optical parametric amplification spectroscopy, which severely interferes the reliable acquisition of the time-resolved fluorescence spectra especially for an optically dilute sample. Superfluorescence originates from the optical amplification of the vacuum quantum noise, which would be inevitably concomitant with the amplified fluorescence photons during the optical parametric amplification process. Here, we report the development of a femtosecond time-resolved fluorescence non-collinear optical parametric amplification spectrometer assisted with a 32-channel lock-in amplifier for efficient rejection of the superfluorescence background. With this spectrometer, the superfluorescence background signal can be significantly reduced to 1/300–1/100 when the seeding fluorescence is modulated. An integrated 32-bundle optical fiber is used as a linear array light receiver connected to 32 photodiodes in one-to-one mode, and the photodiodes are further coupled to a home-built 32-channel synchronous digital lock-in amplifier. As an implementation, time-resolved fluorescence spectra for rhodamine 6G dye in ethanol solution at an optically dilute concentration of 10{sup −5}M excited at 510 nm with an excitation intensity of 70 nJ/pulse have been successfully recorded, and the detection limit at a pump intensity of 60 μJ/pulse was determined as about 13 photons/pulse. Concentration dependent redshift starting at 30 ps after the excitation in time-resolved fluorescence spectra of this dye has also been observed, which can be attributed to the formation of the excimer at a higher concentration, while the blueshift in the earlier time within 10 ps is attributed to the solvation process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rejecting cosmic background for exclusive charged current quasi elastic neutrino interaction studies with Liquid Argon TPCs; a case study with the MicroBooNE detector

Cosmic ray (CR) interactions can be a challenging source of background for neutrino oscillation and cross-section measurements in surface detectors. We present methods for CR rejection in measurements of charged-current quasielastic-like (CCQE-like) neutrino interactions, with a muon and a proton in the final state, measured using liquid argon time projection chambers (LArTPCs). Using a sample of cosmic data collected with the MicroBooNE detector, mixed with simulated neutrino scattering events, a set of event selection criteria is developed that produces an event sample with minimal contribution from CR background. Depending on the selection criteria used a purity between 50% and 80% can be achieved with a signal selection efficiency between 50% and 25%, with higher purity coming at the expense of lower efficiency. While using a specific dataset from the MicroBooNE detector and selection criteria values optimized for CCQE-like events, the concepts presented here are generic and can be adapted for various studies of exclusive v μ CCQE interactions in LArTPCs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Computational and experimental platform for understanding and optimizing water flux and salt rejection in nanoporous membranes.

Affordable clean water is both a global and a national security issue as lack of it can cause death, disease, and international tension. Furthermore, efficient water filtration reduces the demand for energy, another national issue. The best current solution to clean water lies in reverse osmosis (RO) membranes that remove salts from water with applied pressure, but widely used polymeric membrane technology is energy intensive and produces water depleted in useful electrolytes. Furthermore incremental improvements, based on engineering solutions rather than new materials, have yielded only modest gains in performance over the last 25 years. We have pursued a creative and innovative new approach to membrane design and development for cheap desalination membranes by approaching the problem at the molecular level of pore design. Our inspiration comes from natural biological channels, which permit faster water transport than current reverse osmosis membranes and selectively pass healthy ions. Aiming for an order-of-magnitude improvement over mature polymer technology carries significant inherent risks. The success of our fundamental research effort lies in our exploiting, extending, and integrating recent advances by our team in theory, modeling, nano-fabrication and platform development. A combined theoretical and experimental platform has been developed to understand the interplay between water flux and ion rejection in precisely-defined nano-channels. Our innovative functionalization of solid state nanoporous membranes with organic protein-mimetic polymers achieves 3-fold improvement in water flux over commercial RO membranes and has yielded a pending patent and industrial interest. Our success has generated useful contributions to energy storage, nanoscience, and membrane technology research and development important for national health and prosperity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Parametric, Frequency-Domain Approach for Clutter Analysis & Rejection in Remote Sensing

A novel approach is presented for parametric analysis of remotely-sensed ground and cloud clutter. A spatial-frequency-domain clutter model is generated from an extensive, one-year database of weather imagery and statistics are given for each spatial frequency. This approach is useful for the analysis and design of spatial and temporal clutter-rejection filters, which can also be analyzed in this domain.

54 ENVIRONMENTAL SCIENCES↗

DMTN-080: Coaddition Artifact Rejection and CompareWarp

LSST images will be contaminated with transient artifacts, such as optical ghosts, satellite trails, and cosmic rays, and with transient astronomical sources, such as asteroid ephemerides. We developed and tested an algorithm to find and reject these artifacts during coaddition, in order to produce clean coadds to be used for deep detection and preliminary object characterization. This algorithm, CompareWarpAssembleCoadd, uses the time-series of PSF-matched warped images to identify transient artifacts. It detects artifact candidates on the image differences between each PSF-matched warp and a static sky model. These artifact candidates include both true transient artifacts and difference-image false positives such as difficult-subtract-sources and variable sources such as stars and quasars. We use the feature that true transients appear at a given position in the difference images in only a small fraction (configurable) of visits, whereas variable sources and difficult-to-subtract sources appear in most difference images. In this report, we present a description of the method and an evaluation using Hyper SuprimeCam PDR1 data.

79 ASTRONOMY AND ASTROPHYSICS↗