Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Countering sensor drift in x-ray micrscopy with fast and robust optimal control

In X-ray microscopy it is imperative that the relative position between the optics stage, that carries the X-ray focusing optics, and the sample stage follow a certain trajectory while either the optics or sample stage is being scanned. Main challenges in achieving this requirement include - open loop drift, environmental disturbance, measurement noise, sensor drift, and control hardware limit. The state-of-the-art in X-ray microscopy at Advanced Photon Source (APS) at Argonne National Laboratory (ANL) features an H ∞ control architecture applied to only the optics stage or both the optics and sample stage, achieving the objectives of large tracking bandwidth over 200 Hz, good positioning resolution on the order of nanometers, rejection of environmental disturbance, attenuation of measurement noise, good Xray diffraction image resolution and increased imaging bandwidth. However, an unaddressed issue in our existing robust control design is that the sensors and the fixtures that hold the sensors drift with time due to changing air temperature in the APS beamline. Since the drift of sensor itself is not measured, it affects the relative position between the focusing optics and sample resulting into imaging artifacts and reduced image resolution. In this article, we demonstrate the rejection of the sensor drift by directly measuring the displacement of the sensor with respect to the global reference frame. Both the measured sensor displacement (i.e. sensor drift) and optics stage displacement are incorporated in the H ∞ control architecture to achieve the above mentioned objectives in addition to minimal relative displacement between the optics stage and the sample stage. This will improve the Xray image resolution and reduce image artifacts.

Robust Control↗

On the tensoresistance of n-Ge and n-Si crystals with radiation-induced defects

A variation in the tensoresistance of n-Ge:Sb and n-Si:As crystals as a result of irradiation with γ-ray photons ({sup 60}Co source) at fixed temperatures under conditions of the application of uniaxial elastic stress (0 ≤ X ≤ 1.2 GPa) along the main crystallographic direction is studied. It is found that, in the case of the deformation axis being in an asymmetric position relative to the isoenergetic ellipsoids, there is a maximum for the dependences of the tensoresistance ρ{sub X}/ρ{sub 0} = f(X); an explanation as to the nature of the observed effect is suggested. Tensoresistance is revealed in unirradiated n-Si:As crystals in the case of the deformation axis being in a symmetric position relative to all isoenergetic ellipsoids; the value of the tensoresistance as a result of irradiation with γ-ray photons decreases. It is shown that this effect can be attributed to a variation in the mobility of electrons in the conduction band as a result of an increase in the transverse effective mass and the appearance of new deep-level centers under the effect of irradiation, respectively.

36 MATERIALS SCIENCE↗

Modeling Microgravity Induced Fluid Redistribution Autoregulatory and Hydrostatic Enhancements

Space flight induces a marked cephalad (headward) redistribution of blood and interstitial fluid potentially resulting in a loss of venous tone and reduction in heart muscle efficiency upon introduction into the microgravity environment. Using various types of computational models, we are investigating how this fluid redistribution may induce intracranial pressure changes, relevant to reported reductions in astronaut visual acuity, part of the Visual Impairment and Intracranial Pressure (VIIP) syndrome. Methods: We utilize a lumped parameter cardiovascular system (CVS) model, augmented by compartments comprising the cerebral spinal fluid (CSF) space, as the primary tool to describe how microgravity, and the associated lack of hydrostatic gradient, impacts fluid redistribution. Models of ocular fluid pressures and biomechanics then accept the output of the above model as boundary condition input to allow more detailed, local analysis (see IWS Abstract by Ethier et al.). Recently, we enhanced the capabilities our previously reported CVS model through the implementation of robust autoregulatory mechanisms and a more fundamental approach to the implementation of hydrostatic mechanisms. Modifying the approach of Blanco et al., we implemented auto-regulation in a quasi-static manner, as an averaged effect across the span of one heartbeat. This approach reduced the higher frequency perturbations from the regulatory mechanism and was intended to allow longer simulation times (days) than models that implement within-beat regulatory mechanisms (minutes). A more fundamental approach to hydrostatics was implemented by a quasi-1D approach, in which compartment descriptions include compartment length, orientation and relative position, allowed for modeling of body orientation, relative body positioning and, in the future, alternative gravity environments. At this time the inclusion of hydrostatic mechanisms supplies additional capabilities to train and validate the CVS model with terrestrial data. Results and Conclusions: With the implementation of auto-regulation and hydrostatic modeling capabilities, the model performs as expected in the maintaining the CA (Central Artery) compartment pressure when simulating orientations ranging from supine to standing. The model appears to generally overpredict heart rate and thus cardiac output, possibly indicating sensitivity to the nominal heart rate, which is used as an initial set point of the regulation mechanisms. Despite this sensitivity, the model performs consistently for many hours of simulation time, indicating the success of our quasi-static implementation approach.

biomechanics↗

Otolith-Canal Convergence In Vestibular Nuclei Neurons

The current final report covers the period from June 1, 1999 to May 31, 2002. The primary objective of the investigation was to determine how information regarding head movements and head position relative to gravity is received and processed by central vestibular nuclei neurons in the brainstem. Specialized receptors in the vestibular labyrinths of the inner ear function to detect angular and linear accelerations of the head, with receptors located in the semicircular canals transducing rotational head movements and receptors located in the otolith organs transducing changes in head position relative to gravity or linear accelerations of the head. The information from these different receptors is then transmitted to central vestibular nuclei neurons which process the input signals, then project the appropriate output information to the eye, head, and body musculature motor neurons to control compensatory reflexes. Although a number of studies have reported on the responsiveness of vestibular nuclei neurons, it has not yet been possible to determine precisely how these cells combine the information from the different angular and linear acceleration receptors into a correct neural output signal. In the present project, rotational and linear motion stimuli were separately delivered while recording responses from vestibular nuclei neurons that were characterized according to direct input from the labyrinth and eye movement sensitivity. Responses from neurons receiving convergent input from the semicircular canals and otolith organs were quantified and compared to non-convergent neurons.

Dickman, J. David↗

Circulating levels of perfluoroalkyl substances are associated with dietary patterns – A cross sectional study in elderly Swedish men and women

Background: In our daily life, we are exposed to perfluoroalkyl substances (PFAS) with possible health implications. The main exposure route for these substances is diet but comparative studies on how dietary habits influence exposure are lacking. Objectives: To examine the relations between blood levels of PFAS and adherence to three predefined dietary patterns (a WHO recommended diet, a Mediterranean-like diet, and a Low-Carbohydrate High-Protein (LCHP) diet) in an elderly Swedish population. Methods: Dietary data from 7-day food records and serum concentrations of PFAS were obtained from a 70-year-old Swedish population (n=844), the Prospective Investigation of the Vasculature in Uppsala Seniors (PIVUS) study. The Healthy Diet Indicator score (based on WHO recommendations), the Mediterranean Diet Score and LCHP score were used to assess adherence. Multivariate linear regression was used to assess the associations between eight major PFAS and adherence to each dietary pattern. Results: The WHO recommended diet was positively associated with perfluorohexane sulfonic acid (PFHxS). The LCHP diet was positively related to four out of eight PFAS; namely, perfluorooctane sulfonic acid (PFOS), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUnDA). The Mediterranean-like diet was positively associated with most PFAS; namely perfluorooctanoic acid (PFOA), perfluorooctane sulfonamide (PFOSA), PFHxS, PFNA, PFDA, and PFUnDA. Conclusions: All dietary patterns were positively associated with blood levels of PFAS. The highest body burden of PFAS was found in individuals with high adherence to a Mediterranean-like diet, whilst individuals who more closely followed the officially recommended diet displayed a lower body burden of these compounds. - Highlights: • Perfluoroalkyl substances (PFAS) quantified in blood of 70-y-old Swedish subjects. • Adherence to predefined dietary patterns was associated with circulating PFAS. • A Mediterranean-like diet was positively associated with most circulating PFAS. • A low-carbohydrate high-protein diet was positively related to some PFAS in blood. • A WHO-recommended diet was only related to higher circulating levels of PFHxS.

54 ENVIRONMENTAL SCIENCES↗

SU-E-T-315: Dosimetric Effects of Couch Top Shift On VMAT Delivery in Absence of Indexing

Purpose: To investigate dosimetric effects of couch top shift for volumetric-modulated arc therapy (VMAT) in absence of indexing of immobilization devices. Methods: A total of twelve VMAT treatment plans were selected from three regions (lung, abdomen, and pelvis) to account for the variation of the patient position relative to the couch top. The treatment plans were generated using the Varian Eclipse system. A pinpoint ionization chamber (PTW TN31014) was placed at the center of 16-cm solid water phantom and the dose was delivered using the Varian TrueBeam STx with BrainLAB ExacTrac couch top. To simulate the day-to-day variation of the patient position relative to couch top, the couch top was laterally shifted up to 50 mm, with an increment of 5 mm from 0 to 20 mm; and of 10 mm afterwards, and the phantom was moved back to 0 cm shift for measurement. The dose was also delivered using a Varian tennis racket grid insert at 0 cm shift to simulate the absence of couch top. The treatment plans were delivered with 6, 10, and 15 MV photons using the same leaf sequencing to investigate the energy dependence of couch top shift. The dose difference was normalized to 0 cm shift for the regular couch top for comparison. Results: The percent difference of dose was found to increase with lateral shift for all energies; however, the average differences were close to 0% and the maximum difference was within 1% along the lateral shifts. The differences with the absence of couch top were 2.2±0.5% (6MV), 1.7±0.3% (10MV), and 1.6±0.2% (15MV), respectively. Conclusion: The inclusion of couch top is recommended in treatment planning to minimize the dosimetric uncertainty between calculated and delivered dose even in absence of indexing of immobilization devices in VMAT delivery.

60 APPLIED LIFE SCIENCES↗

Advanced Video Guidance Sensor Development Testing

NASA's Marshall Space Flight Center was the driving force behind the development of the Advanced Video Guidance Sensor, an active sensor system that provides near-range sensor data as part of an automatic rendezvous and docking system. The sensor determines the relative positions and attitudes between the active sensor and the passive target at ranges up to 300 meters. The VGS uses laser diodes to illuminate retro-reflectors in the target, a solid-state camera to detect the return from the target, and image capture electronics and a digital signal processor to convert the video information into the relative positions and attitudes. This development effort has required a great deal of testing of various sorts at every phase of development, and some of the test efforts, predictions, and results will be laid out in this paper.

Howard, Richard T.↗

Advanced Video Guidance Sensor (AVGS) Development Testing

NASA's Marshall Space Flight Center was the driving force behind the development of the Advanced Video Guidance Sensor, an active sensor system that provides near-range sensor data as part of an automatic rendezvous and docking system. The sensor determines the relative positions and attitudes between the active sensor and the passive target at ranges up to 300 meters. The AVGS uses laser diodes to illuminate retro-reflectors in the target, a solid-state camera to detect the return from the target, and image capture electronics and a digital signal processor to convert the video information into the relative positions and attitudes. The AVGS will fly as part of the Demonstration of Autonomous Rendezvous Technologies (DART) in October, 2004. This development effort has required a great deal of testing of various sorts at every phase of development. Some of the test efforts included optical characterization of performance with the intended target, thermal vacuum testing, performance tests in long range vacuum facilities, EMI/EMC tests, and performance testing in dynamic situations. The sensor has been shown to track a target at ranges of up to 300 meters, both in vacuum and ambient conditions, to survive and operate during the thermal vacuum cycling specific to the DART mission, to handle EM1 well, and to perform well in dynamic situations.

Howard, Richard T.↗

Simulation and ground testing with the Advanced Video Guidance Sensor

The Advanced Video Guidance Sensor (AVGS), an active sensor system that provides near-range 6-degree-of-freedom sensor data, has been developed as part of an automatic rendezvous and docking system for the Demonstration of Autonomous Rendezvous Technology (DART). The sensor determines the relative positions and attitudes between the active sensor and the passive target at ranges up to 300 meters. The AVGS uses laser diodes to illuminate retro-reflectors in the target, a solid-state imager to detect the light returned from the target, and image capture electronics and a digital signal processor to convert the video information into the relative positions and attitudes. The development of the sensor, through initial prototypes, final prototypes, and three flight units, has required a great deal of testing at every phase, and the different types of testing, their effectiveness, and their results, are presented in this paper, focusing on the testing of the flight units. Testing has improved the sensor's performance.

Howard, Richard T.↗

Geometry of the Hubble Space Telescope Wide Field/Planetary Camera field

We present a solution for the relative positions and orientations of the four charge coupled device (CCD) chips on the Hubble Space Telescope (HST) Planetary Camera (PC). An accurate solution is required when matching HST images with ground-based images or with one another. The solution is accurate to about 2/3 PC pixel or about .03 sec, a tenfold improvement over the best previous solution. The CCDs are rotated relative to one another by up to 1 deg. The solution is based on images taken between December 1990 and June 1992 and is stable over that entire period. We also present a solution for the relative positions and orientations of the four CCD chips on the HST Wide Field Camera (WFC). This solution is accurate to about 1/2 WFC pixel or about .05 sec.

Gould, Andrew↗

An Advanced Video Sensor for Automated Docking

This paper describes the current developments in video-based sensors at the Marshall Space Flight Center. The Advanced Video Guidance Sensor is the latest in a line of video-based sensors designed for use in automated docking systems. The X-33, X-34, X-38, and X-40 are all designed to be unpiloted vehicles; such vehicles will require a sensor system that will provide adequate data for the vehicle to accomplish its mission. One of the primary tasks planned for re-usable launch vehicles is to resupply the space station. In order to approach the space station in a self-guided manner, the vehicle must have a reliable and accurate sensor system to provide relative position and attitude information between the vehicle and the space station. The Advanced Video Guidance Sensor is being designed and built to meet this requirement, as well as requirements for other vehicles docking to a variety of target spacecraft. The Advanced Video Guidance Sensor is being designed to allow range and bearing information to be measured at ranges up to 2 km. The sensor will measure 6-degree-of-freedom information (relative positions and attitudes) from approximately 40 meters all the way in to final contact (approximately 1 meter range). The sensor will have a data output rate of 20 Hz during tracking mode, and will be able to acquire a target within one half of a second. The prototype of the sensor will be near completion at the time of the conference.

Howard, Richard T.↗

Flight control augmentation for AFT CG launch vehicles

The Space Shuttle was only the first step in achieving routine access to space. Recently, the NASA Marshall Space Flight Center (MSFC) has been studying a whole spectrum of new launch vehicles (L/V's) for space transportation. Some of these could transport components of the Space Station to orbit, and some could take us to Mars and beyond to boldly expand our frontiers of knowledge. In all our future launch vehicle (L/V) designs, decreasing the structural weight will always be of great concern. This is tantamount to increased payload capability, which in turn means reduced cost-per-pound to orbit. One very significant increase in payload capability has been defined. In a L/V recently studied at MSFC it has been shown that a sizable weight savings can be realized by a rearrangement of the internal propellant tanks. Studies have been conducted both at MSFC and at Martin Marietta Corporation, maker of the Space Shuttle External Tank (ET) which show that a very substantial weight can be saved by inverting the relative positions of the liquid hydrogen (LH2) and the liquid oxygen (LOX) propellant tanks in a particular L/V studied. As the vehicle sits on the launch pad, in the conventional configuration the heavier LOX tank is located on top of the lighter LH2. This requires a heavy structural member between the two tanks to prevent the lighter LH2 tank from being crushed. This configuration also requires large, long, and even drag producing LOX feed lines running the length of the vehicle on the exterior fuselage. If the relative position of the propellant tanks is inverted, both the heavy structural separation member and the long LOX feed lines could be deleted. While the structures community at MSFC was elated with this finding, the LOX tank aft configuration gave the vehicle an aft center-of-gravity (cg) location which surfaced controllability concerns. In the conventional configuration the L/V is controlled in the ascent trajectory by the gimballing of its rocket engines. Studies have been conducted at MSFC which showed that the resulting aft cg configured L/V would not be adequately controllable with the engine gimballing alone.

Barret, Chris↗

Tethered body problems and relative motion orbit determination

Selected problems dealing with orbiting tethered body systems have been studied. In addition, a relative motion orbit determination program was developed. Results from these tasks are described and discussed. The expected tethered body motions were examined, analytically, to ascertain what influence would be played by the physical parameters of the tether, the gravity gradient and orbit eccentricity. After separating the motion modes these influences were determined; and, subsequently, the effects of oscillations and/or rotations, on tether force, were described. A study was undertaken, by examining tether motions, to see what type of control actions would be needed to accurately place a mass particle at a prescribed position relative to a main vehicle. Other applications for tethers were studied. Principally these were concerned with the producing of low-level gee forces by means of stabilized tether configurations; and, the initiation of free transfer trajectories from tether supported vehicle relative positions.

Eades, J. B., Jr.↗

Encoding techniques for complex information structures in connectionist systems

Two general information encoding techniques called relative position encoding and pattern similarity association are presented. They are claimed to be a convenient basis for the connectionist implementation of complex, short term information processing of the sort needed in common sense reasoning, semantic/pragmatic interpretation of natural language utterances, and other types of high level cognitive processing. The relationships of the techniques to other connectionist information-structuring methods, and also to methods used in computers, are discussed in detail. The rich inter-relationships of these other connectionist and computer methods are also clarified. The particular, simple forms are discussed that the relative position encoding and pattern similarity association techniques take in the author's own connectionist system, called Conposit, in order to clarify some issues and to provide evidence that the techniques are indeed useful in practice.

Barnden, John↗

Interaction between arsenic exposure from drinking water and genetic susceptibility in carotid intima–media thickness in Bangladesh

Epidemiologic studies that evaluated genetic susceptibility for the effects of arsenic exposure from drinking water on subclinical atherosclerosis are limited. We conducted a cross-sectional study of 1078 participants randomly selected from the Health Effects of Arsenic Longitudinal Study in Bangladesh to evaluate whether the association between arsenic exposure and carotid artery intima–media thickness (cIMT) differs by 207 single-nucleotide polymorphisms (SNPs) in 18 genes related to arsenic metabolism, oxidative stress, inflammation, and endothelial dysfunction. Although not statistically significant after correcting for multiple testing, nine SNPs in APOE, AS3MT, PNP, and TNF genes had a nominally statistically significant interaction with well-water arsenic in cIMT. For instance, the joint presence of a higher level of well-water arsenic (≥ 40.4 μg/L) and the GG genotype of AS3MT rs3740392 was associated with a difference of 40.9 μm (95% CI = 14.4, 67.5) in cIMT, much greater than the difference of cIMT associated with the genotype alone (β = − 5.1 μm, 95% CI = − 31.6, 21.3) or arsenic exposure alone (β = 7.2 μm, 95% CI = − 3.1, 17.5). The pattern and magnitude of the interactions were similar when urinary arsenic was used as the exposure variable. Additionally, the at-risk genotypes of the AS3MT SNPs were positively related to the proportion of monomethylarsonic acid (MMA) in urine, which is indicative of arsenic methylation capacity. The findings provide novel evidence that genetic variants related to arsenic metabolism may play an important role in arsenic-induced subclinical atherosclerosis. Future replication studies in diverse populations are needed to confirm the findings. - Highlights: • Nine SNPs had a nominally significant interaction with well-water arsenic in cIMT. • Three SNPs in AS3MT showed nominally significant interactions with urinary arsenic. • cIMT was much higher among subjects with higher arsenic exposure and AS3MT SNPs. • The at-risk genotypes of AS3MT SNPs were positively related to urinary MMA%.

60 APPLIED LIFE SCIENCES↗

An infrared alignment telescope

For problems involving the determination of the relative positions of optical components in a complex assembly, rather precise measurements can be routinely obtained when the visible portion of the spectrum is involved. Problems arise, however, when the lens elements to be aligned are made of infrared transmitting materials such as germanium, which is opaque to visible radiation. The alignment of a multichannel infrared measurement satellite called Haloe, which is currently being developed by NASA, represents an example of a particularly difficult task. The present paper is concerned with an infrared alignment telescope (IAT) which satisfies the need for a precision alignment tool capable of operating anywhere in the 2.4 to 12 micron wavelength range. When coupled to a commercial infrared scanner and display device, the IAT will provide a real-time picture of the relative positions of components and images over distances in the range from 20 inches to infinity.

Dilworth, D. C.↗

Two-Dimensional Measurement of n+-p Asymmetrical Junctions in Multicrystalline Silicon Solar Cells Using AFM-Based Electrical Techniques with Nanometer Resolution: Preprint

Lateral inhomogeneities of modern solar cells demand direct electrical imaging with nanometer resolution. We show that atomic force microscopy (AFM)-based electrical techniques provide unique junction characterizations, giving a two-dimensional determination of junction locations. Two AFM-based techniques, scanning capacitance microscopy/spectroscopy (SCM/SCS) and scanning Kelvin probe forcemicroscopy (SKPFM), were significantly improved and applied to the junction characterizations of multicrystalline silicon (mc-Si) cells. The SCS spectra were taken pixel by pixel by precisely controlling the tip positions in the junction area. The spectra reveal distinctive features that depend closely on the position relative to the electrical junction, which allows us to indentify theelectrical junction location. In addition, SKPFM directly probes the built-in potential over the junction area modified by the surface band bending, which allows us to deduce the metallurgical junction location by identifying a peak of the electric field. Our results demonstrate resolutions of 10-40 nm, depending on the techniques (SCS or SKPFM). These direct electrical measurements withnanometer resolution and intrinsic two-dimensional capability are well suited for investigating the junction distribution of solar cells with lateral inhomogeneities.

14 SOLAR ENERGY↗

Homeostatic maintenance of nonstructural carbohydrates during the 2015-2016 El Niño drought across a tropical forest precipitation gradient

Non-structural carbohydrates (NSCs) are essential for maintenance of plant metabolism, and may be sensitive to both short- and long-term climatic variation. The NSC variation in NSCs in moist tropical forests has only rarely been studied, however, so regulation of NSCs in these systems is poorly understood. We measured foliar and branch NSC content in 23 tree species at three sites located across a large precipitation gradient in Panama during the 2015-2016 El Niño to examine how short- and long-term climatic variation impacts carbohydrate dynamics. Across all sites, leaf NSCs increased over diurnal time-periods. There was no significant difference in total NSCs over as the progression of the drought progressed (leaf p=0.32, branch p=0.30), nor across the rainfall gradient (leaf p=0.91, branch p=0.96). The Foliar soluble sugars decreased while starch increased :starch ratio did decrease over the duration of the dry period, suggesting greater partitioning of NSCs to storage than metabolism or transport as drought progressed. There was large variation across species at all sites, but total foliar NSCs were positively correlated with leaf mass per area, while branch sugars were positively related to leaf temperature and negatively correlated with daily photosynthesis and wood density. The NSC homeostasis across a wide range of conditions suggests that NSCs are an allocation priority in moist tropical forests.

Dickman, Lee T.↗