Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Petrologic and mineralogic investigation of some crystalline rocks returned by the Apollo 14 mission.

Apollo 14 crystalline rocks (14053 and 14310) and crystalline rock fragments (14001,7,1; 14001,7,3; 14073; 14167,8,1 and 14321,191,X-1) on which Rb/Sr, Ar-40/Ar-39, or cosmic ray exposure ages have been determined by our colleagues were studied with the electron microprobe and the petrographic microscope. Rock samples 14053 and 14310 are mineralogically and petrologically distinct from each other. On the basis of mineralogic and petrologic characteristics all of the fragments, except 14001,7,1, are correlative with rock 14310. Sample 14073 is an orthopyroxene basalt with chemical and mineralogic affinities to ?KREEP,' the ?magic' and ?cryptic' components. Fragment 14001,7,1 is very similar to Luny Rock I.

Gancarz, A. J.↗

U-Th-Pb systematics in three Apollo 14 basalts and the problem of initial Pb in lunar rocks.

The isotopic composition of Pb and the elemental concentration of U, Th and Pb were measured on 'total' rock samples 14053, 14073 and 14310 and on mineral separates of 14310 and 14053. These are the first Pb-U isochrons obtained for lunar basalts and indicate a reasonable solution to the previous discrepancy between the different methods of 'absolute' age determination. The resulting U-Pb isochron ages are compatible with the Rb-Sr and K-Ar ages on the same rocks. However, it is not possible to establish a precise time of 'crystallization' from the Pb-U data because of the small angle of intersection between the linear arrays and the concordia curve. These data show that total rock model ages do not in general yield crystallization ages. The data on 14310 and 14053 show that these rocks were formed containing a highly radiogenic initial lead which accounts for the excessively high total rock model ages by the U-Th-Pb method. The data prove that at the time of extrusion of some basalts, unsupported lead with extremely high Pb-207/Pb-206 ratios was added to the lunar surface.

Tera, F.↗

Experimental petrology and origin of Fra Mauro rocks and soil.

Results of melting experiments over the pressure range from 0 to 20 kb on Apollo 14 igneous rocks 14310 and 14072, and on comprehensive fines 14259. It is found that low-pressure crystallization of rocks 14310 and 14072 proceeds as predicted from the textural relationships displayed by thin sections of these rocks. The mineralogy and textures of these rocks are the result of near-surface crystallization. The chemical compositions of these lunar samples all show special relationships to multiply saturated liquids in the system anorthite-forsterite-fayalite-silica at low pressure. Partial melting of a lunar crust consisting largely of plagioclase, low-calcium pyroxene, and olivine, followed by crystal fractionation at the lunar surface, is a satisfactory mechanism for the production of the igneous rocks and soil glasses sampled by Apollo 14. The KREEP component of other lunar soils, may have a similar origin.

Walker, D.↗

Ar40-Ar39 systematics in rocks and separated minerals from Apollo 14.

The Ar40-Ar39 dating technique has been applied to separated minerals (plagioclase, pyroxene, quintessence and an 'ilmenite' concentrate), and whole rock samples of Apollo 14 rocks 14310 and 14073. Plagioclase shows the best gas retention characteristics, with no evidence of anomalous behavior and only a small amount of gas loss in the initial release. Ages determined from the plagioclase of 14310 and 14073 are (3.87 plus or minus 0.05) and (3.88 plus or minus 0.05) AE respectively. Low apparent ages at low release temperatures, which are frequently observed in whole rock Ar40-Ar39 experiments on lunar basalts, are shown to be principally due to gas loss in the high-K interstitial glass (quintessence) phase, confirming earlier suggestions. The decrease in apparent ages in the high-temperature release previously observed in several total rock samples of Apollo 14 basalts has been identified with the pyroxene. Plagioclase is also found to be the most suitable mineral for the determination of cosmic ray exposure ages, and exposure ages of 280 and 113 m.y. are found for 14310 and 14073, respectively, indicating that these rocks, which are very similar in many respects, have different exposure histories.

Turner, G.↗

Apollo 16 rocks - Petrology and classification.

The Apollo 16 rocks are classified in three broad intergradational groups: (1) crystalline rocks, subdivided into igneous rocks and metaclastic rocks, (2) glass, and (3) breccias, which are subdivided into five groups on the basis of clast and matrix colors. Most of the rocks were derived by impact brecciation of an anorthosite-norite suite but may represent ejecta from more than one major basin. First-cycle breccias are believed to have consisted of clasts of crushed anorthosite-norite in a fine-grained partly fused matrix with a chemical composition similar to that of the clasts. Most of the other recognized breccia types could have been produced by rebrecciation of first-cycle breccias.

Wilshire, H. G.↗

An evaluation of multiband photography for rock discrimination

The author has identified the following significant results. With the advent of ERTS and Skylab satellites, multiband imagery and photography have become readily available to geologists. The ability of multiband photography to discriminate sedimentary rocks was examined. More than 8600 in situ measurements of band reflectance of the sedimentary rocks of the Front Range, Colorado, were acquired. Statistical analysis of these measurements showed that: (1) measurements from one site can be used at another site 100 miles away; (2) there is basically only one spectral reflectance curve for these rocks, with constant amplitude differences between the curves; and (3) the natural variation is so large that at least 150 measurements per formation are required to select best filters. These conclusions are supported by subjective tests with aerial multiband photography. The designed multiband photography concept for rock discrimination is not a practical method of improving sedimentary rock discrimination capabilities.

Lee, K.↗

Nuclear microprobe analysis of solar proton implantation profiles in lunar rock surfaces

Discussion of the results of hydrogen (proton) depth profile concentration analyses conducted on selected Apollo 16 rocks. A modeling of solar particle implantation profiles in lunar rocks is shown to trace the evolvement of these profiles under the combined influence of diffusion of atomic particles implanted in the rock, and rock surface erosion. It is also demonstrated that such diffusion may have a significant effect on the shape of the implantation profiles in certain rock materials.

Stauber, M. C.↗

Rock 14318 - A polymict lunar breccia with chondritic texture

Rock 14318 is a complex microbreccia consisting of lithic fragments, chondrules, glass spherules, and glass and mineral fragments that are embedded into a fine-grained, partly glassy matrix. Compositions of lithic fragments, glasses and chondrules, in terms of compositional rock and rock suite equivalents, represent members of the ANT (anorthositic-noritic-troctolite) suite; the alkalic high-alumina basalt (KREEP) group; high-alkali quartz basalt; basalt; and dunite. The polymict nature of many lithic fragments suggests that rock 14318 requires at least two, and probably more, impact episodes for its formation. Final agglomeration took place while part of the material was hot, as is indicated by the welded texture, suggesting that the final impact event was a large one, producing a fiery cloud similar to a nuee ardente. The close similarity in texture of lunar rock 14318 to certain polymict-brecciated meteorites such as Siena suggests that meteorites of this type were also formed by complex and successive impact events on the surface of the meteorite parent body, rather than during agglomeration of the parent body.

Kurat, G.↗

Progress of the LASL dry hot rock geothermal energy project

The possibilities and problems of extracting energy from geothermal reservoirs which do not spontaneously yield useful amounts of steam or hot water are discussed. The system for accomplishing this which is being developed first is a pressurized-water circulation loop intended for use in relatively impermeable hot rock. It will consist of two holes connected through the hot rock by a very large hydraulic fracture and connected at the surface through the primary heat exchanger of an energy utilization system. Preliminary experiments in a hole 2576 ft (0.7852 km) deep, extending about 470 ft (143 m) into the Precambrian basement rock underlying the Jemez Plateau of north-central New Mexico, revealed no unexpected difficulties in drilling or hydraulically fracturing such rock at a temperature of approximately 100 C, and demonstrated a permeability low enough so that it appeared probable that pressurized water could be contained by the basement rock. Similar experiments are in progress in a second hole, now 6701 ft (2.043 km) deep, about 1.5 miles (2.4 km) south of the first one.

Smith, M. C.↗

Rock failure analysis by combined thermal weakening and water jet impact

The influence of preheating on the initiation of fracture in rocks subjected to the impingement of a continuous water jet is studied. Preheating the rock is assumed to degrade its mechanical properties and strength in accordance with existing experimental data. The water jet is assumed to place a quasi-static loading on the surface of the rock. The loading is approximated by elementary functions which permit analytic computation of the induced stresses in a rock half-space. The resulting stresses are subsequently coupled with the Griffith criteria for tensile failure to estimate the change, due to heating, in the critical stagnation pressure and velocity of the water jet required to cause failure in the rock.

Nayfeh, A. H.↗

A survey of lunar rock types and comparison of the crusts of earth and moon

The principal known types of lunar rocks are briefly reviewed, and their chemical relationships discussed. In the suite of low-KREEP highland rocks, Fe/(Fe + Mg) in the normative mafic minerals increases and the albite content of normative plagio-clase decreases as the total amount of normative plagioclase increases, the opposite of the trend predicted by the Bowen reaction principle. The distribution of compositions of rocks from terrestrial layered mafic intrusives is substantially different: here the analyses fall in several discrete clusters (anorthositic rocks, norites, granophyres and ferrogabbros, ultramafics), and the chemical trends noted above are not reproduced. It is suggested that the observed trends in lunar highland rocks could be produced by crystal fractionation in a deep global surface magma system if (1) plagiociase tended to float, upon crystallization, and (2) the magma was kept agitated and well mixed (probably by thermal convection) until crystallization was far advanced and relatively little residual liquid was left. After the crustal system solidified, but before extensive cooling had developed a thick, strong lithosphere, mantle convection was able to draw portions of the lunar anorthositic crust down into the mantle.

Wood, J. A.↗

The lunar highland melt-rock suite

Size can be used as a criterion to select 18 large (larger than 1 cm) samples from among 148 melt-rock fragments of all sizes. This selection provides a suite of large samples which represent the important chemical variants among highland melt rocks; each large sample has enough material for a number of sample-destructive studies, as well as for future reference. Cluster analysis of the total data base of 148 highland melt rocks shows six distinct groups: anorthosite, gabbroic anorthosite, anorthositic gabbro ('highland basalt'), low K Fra Mauro, intermediate-K Fra Mauro, and high-K. Large samples are available for four of the melt-rock groups (gabbroic anorthosite, anorthositic gabbro, low-K Fra Mauro, and intermediate-K Fra Mauro). This sample selection reveals two subgroups of anorthositic gabbro (one anorthite-poor with negative Eu anomaly and one anorthite-rich without Eu anomaly). There is a sharp distinction between those Apollo 16 melt rocks and glasses which have both been classified as 'gabbroic anorthosite'.

Vaniman, D. T.↗

Pitted and fluted rocks in the Western Desert of Egypt - Viking comparisons

The Western Desert of Egypt is one of the most arid regions on earth and is probably the closest terrestrial analog to the surface of Mars. An expedition to the area in 1978 revealed an abundance of quartzite and basalt rocks that have been pitted and fluted by wind erosion and deflation of the desert surface. These pitted rocks are internally homogeneous, show no internal holes or vesicles, and are considered an important but neglected type of ventifact. They bear a striking resemblance to the pitted and fluted rocks seen by the Viking Landers, rocks that have generally been interpreted as vesicular basalts only slightly modified by wind erosion. Wind tunnel studies of the air flow over and around nonstreamlined hand specimens from the Western Desert show that windward abrasion coupled with negative flow, secondary flow, and vorticity in a unidirectional wind can explain the complex arrays of pits and flutes. These field and laboratory observations suggest that the pitted rocks at the Viking Lander sites are also ventifacts, and thus the Martian surface may be far more wind eroded than previously thought.

Mccauley, J. F.↗

Spectral reflectance and discrimination of plutonic rocks in the 0.45- to 2.45-micron region

Visible and near-infrared field spectral reflectance measurements of plutonic rocks were acquired in the 0.45- to 2.45-micron region with a portable field reflectance spectrometer. These spectra were used to determine spectral signatures for the various rock types and to evaluate the separability of these rocks based on their spectral characteristics. A total of 135 samples were divided into 11 groups based on their mineralogy. These 11 groups approximately correspond to traditional rock classifications and include five granitic groups, three gabbroic groups, and three ultramafic groups. The positions, intensity, and presence of iron, CO3(-2), and Al-OH and Mg-OH absorption bands varied among the 11 groups. Each rock group also had a range of albedos characteristic of the group. Stepwise linear discriminant analysis was performed on the spectral data to determine the separability of the 11 groups. Classification accuracy for 30 equally spaced wavelength bands between 0.45 and 2.45 microns was 78% with 10% serious misclassifications. The same analysis was repeated, limiting the spectral data to the wavelength regions corresponding to the proposed Landsat D thematic mapper scanner.

Blom, R. G.↗

Characterization of rock populations on planetary surfaces - Techniques and a preliminary analysis of Mars and Venus

A data collection and analysis scheme developed for the interpretation of rock morphology from lander images is reviewed with emphasis on rock population characterization techniques. Data analysis techniques are also discussed in the context of identifying key characteristics of a rock that place it in a single category with similar rocks. Actual rock characteristics observed from Viking and Venera lander imagery are summarized. Finally, some speculations regarding the block fields on Mars and Venus are presented.

Garvin, J. B.↗

Study of the physical properties of crystalline rocks in the southeast Voronezh anteclise

The physical properties of rocks, in the crystalline mass of the Voronezh anteclise, were studied. The study of the physical properties of rocks is important for the improvement of geophysical methods for mapping crystalline rocks in the foundation and exploration of different geological objects which are associated with the crystalline foundation, covered by the sedimentary mantle. It is found that: (1) rocks in the crystalline foundation are very different in physical properties; (2) the physical properties are closely related to their substance composition and genesis; (3) petrographic properties give clues of rock afficiation to certain complexes; and (4) physical and magnetic properties should be examined by petrography, chemical and X-ray analysis.

Dmitriyevskiy, V. S.↗

Alkali gabbronorite, ultra-KREEPy melt rock and the diverse suite of clasts in North Ray crater feldspathic fragmental breccia 67975

Lunar breccia 67975 is a feldspathic fragmental breccia from North Ray crater, Apollo 16. It contains clasts of alkali gabbronorite and ultra-KREEPy mafic fragment-laden melt breccias, which are unique among Apollo 16 samples. Both are alkali- and iron-rich rocks with moderate to high REE concentrations. They more strongly resemble Apollo 14 gabbronorites and alkali anorthosites and KREEP-rich rocks than they do other Apollo 16 samples. The other clasts in 67975 are the ferroan anorthosites, feldspathic melt rocks, and magnesian granulites, which are typical of other feldspathic fragmental breccias. Examination of bulk and mineral compositions of other breccias and melt rocks suggests that alkali gabbronorite may be a minor component in other North Ray crater breccias and feldspathic melt rocks. This implies that alkali gabbronorite was a fairly early (4.0 b.y.) crustal component in the North Ray crater region.

Lindstrom, M. M.↗

Extensional tectonics during the igneous emplacement of the mafic-ultramafic rocks of the Barberton greenstone belt

The simatic rocks (Onverwacht Group) of the Barberton greenstone belt are part of the Jamestown ophiolite complex. This ophiolite, together with its thick sedimentary cover occupies a complex thrust belt. Field studies have identified two types of early faults which are entirely confined to the simatic rocks and are deformed by the later thrusts and associated folds. The first type of fault (F1a) is regional and always occurs in the simatic rocks along and parallel to the lower contacts of the ophiolite-related cherts (Middle Marker and equivalent layers). These fault zones have previously been referred to both as flaser-banded gneisses and as weathering horizons. In general the zones range between 1-30m in thickness. Displacements along these zones are difficult to estimate, but may be in the order of 1-100 km. The structures indicate that the faults formed close to horizontal, during extensional shear and were therefore low angle normal faults. F1a zones overlap in age with the formation of the ophiolite complex. The second type of faults (F1b) are vertical brittle-ductile shear zones, which crosscut the complex at variable angles and cannot always be traced from plutonic to overlying extrusive (pillowed) simatic rocks. F1b zones are also apparently of penecontemporaneous origin with the intrusive-extrusive igneous processs. F1b zones may either represent transform fault-type activity or represent root zones (steepened extensions) of F1a zones. Both fault types indicate extensive deformation in the rocks of the greenstone belt prior to compressional overthrust tectonics.

Dewit, M. J.↗