Search NASA⌕ Search

SEARCH · Search NASA

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Growth kinetics and electronic properties of unintentionally doped semi-insulating GaN on SiC and high-resistivity GaN on sapphire grown by ammonia molecular-beam epitaxy

Growth of unintentionally doped (UID) semi-insulating GaN on SiC and highly resistive GaN on sapphire using the ammonia molecular-beam epitaxy technique is reported. The semi-insulating UID GaN on SiC shows room temperature (RT) resistivity of 10{sup 11} {Omega} cm and well defined activation energy of 1.0 eV. The balance of compensation of unintentional donors and acceptors is such that the Fermi level is lowered to midgap, and controlled by a 1.0 eV deep level defect, which is thought to be related to the nitrogen antisite N{sub Ga}, similar to the ''EL2'' center (arsenic antisite) in unintentionally doped semi-insulating GaAs. The highly resistive GaN on sapphire shows RT resistivity in range of 10{sup 6}-10{sup 9} {Omega} cm and activation energy varying from 0.25 to 0.9 eV. In this case, the compensation of shallow donors is incomplete, and the Fermi level is controlled by levels shallower than the 1.0 eV deep centers. The growth mechanisms for the resistive UID GaN materials were investigated by experimental studies of the surface kinetics during growth. The required growth regime involves a moderate growth temperature range of 740-780 deg. C, and a high ammonia flux (beam equivalent pressure of 1x10{sup -4} Torr), which ensures supersaturated coverage of surface adsorption sites with NH{sub x} radicals. Such highly nitrogen rich growth conditions lead to two-dimensional layer by layer growth and reduced oxygen incorporation.

36 MATERIALS SCIENCE↗

Formation of metal nanoparticles of various sizes in plasma plumes produced by Ti:sapphire laser pulses

In this paper, an experimental study on generation of nanoparticle various sizes using Ti:sapphire laser pulses, is reported. Nanoparticle formation in plasma plumes of metals like silver and copper, expanding in vacuum, has been studied using stretched pulses of 300 ps duration [subnanoseconds (sub-ns)] from a Ti:sapphire laser. It has been compared with the nanoparticle formation (of the same materials) when compressed pulses of 45 fs duration were used under similar focusing conditions. Nanoparticle formation is observed at intensities as high as 2x10{sup 16} W/cm{sup 2}. The structural analysis of the nanoparticle deposition on a silicon substrate showed that, using 45 fs pulses, smaller nanoparticles of average size {approx}20 nm were generated, whereas on using the sub-ns pulses, larger particles were produced. Also, the visible light transmission and reflection from the nanoparticle film of Ag on glass substrate showed surface plasmon resonance (SPR). The SPR curves of the films of nanoparticles deposited by femtosecond pulses were always broader and reflection/transmission was always smaller when compared with the films formed using the sub-ns pulses, indicating smaller size particle formation by ultrashort pulses. Thus, it has been demonstrated that variation in the laser pulse duration of laser offers a simple tool for varying the size of the nanoparticles generated in plasma plumes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the polarity of GaN micro- and nanowires epitaxially grown on sapphire (0001) and Si(111) substrates by metal organic vapor phase epitaxy and ammonia-molecular beam epitaxy

The polarity of GaN micro- and nanowires grown epitaxially by metal organic vapor phase epitaxy on sapphire substrates and by molecular-beam epitaxy, using ammonia as a nitrogen source, on sapphire and silicon substrates has been investigated. On Al{sub 2}O{sub 3}(0001), whatever the growth technique employed, the GaN wires show a mixture of Ga and N polarities. On Si(111), the wires grown by ammonia-molecular beam epitaxy are almost entirely Ga-polar (around 90%) and do not show inversion domains. These results can be understood in terms of the growth conditions employed during the nucleation stage.

36 MATERIALS SCIENCE↗

Analysis of the AlGaN/GaN vertical bulk current on Si, sapphire, and free-standing GaN substrates

The vertical bulk (drain-bulk) current (I{sub db}) properties of analogous AlGaN/GaN hetero-structures molecular beam epitaxially grown on silicon, sapphire, and free-standing GaN (FS-GaN) have been evaluated in this paper. The experimental I{sub db} (25-300 Degree-Sign C) have been well reproduced with physical models based on a combination of Poole-Frenkel (trap assisted) and hopping (resistive) conduction mechanisms. The thermal activation energies (E{sub a}), the (soft or destructive) vertical breakdown voltage (V{sub B}), and the effect of inverting the drain-bulk polarity have also been comparatively investigated. GaN-on-FS-GaN appears to adhere to the resistive mechanism (E{sub a} = 0.35 eV at T = 25-300 Degree-Sign C; V{sub B} = 840 V), GaN-on-sapphire follows the trap assisted mechanism (E{sub a} = 2.5 eV at T > 265 Degree-Sign C; V{sub B} > 1100 V), and the GaN-on-Si is well reproduced with a combination of the two mechanisms (E{sub a} = 0.35 eV at T > 150 Degree-Sign C; V{sub B} = 420 V). Finally, the relationship between the vertical bulk current and the lateral AlGaN/GaN transistor leakage current is explored.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accurate determination of optical bandgap and lattice parameters of Zn{sub 1-x}Mg{sub x}O epitaxial films (0{<=}x{<=}0.3) grown by plasma-assisted molecular beam epitaxy on a-plane sapphire

Zn{sub 1-x}Mg{sub x}O epitaxial films with Mg concentrations 0{<=}x{<=}0.3 were grown by plasma-assisted molecular beam epitaxy on a-plane sapphire substrates. Precise determination of the Mg concentration x was performed by elastic recoil detection analysis. The bandgap energy was extracted from absorption measurements with high accuracy taking electron-hole interaction and exciton-phonon complexes into account. From these results a linear relationship between bandgap energy and Mg concentration is established for x{<=}0.3. Due to alloy disorder, the increase of the photoluminescence emission energy with Mg concentration is less pronounced. An analysis of the lattice parameters reveals that the epitaxial films grow biaxially strained on a-plane sapphire.

36 MATERIALS SCIENCE↗

The improvement of GaN-based light-emitting diodes using nanopatterned sapphire substrate with small pattern spacing

Self-assembly SiO{sub 2} nanosphere monolayer template is utilized to fabricate nanopatterned sapphire substrates (NPSSs) with 0-nm, 50-nm, and 120-nm spacing, receptively. The GaN growth on top of NPSS with 0-nm spacing has the best crystal quality because of laterally epitaxial overgrowth. However, GaN growth from pattern top is more difficult to get smooth surface than from pattern bottom. The rougher surface may result in a higher work voltage. The stimulation results of finite-difference time-domain (FDTD) display that too large or too small spacing lead to the reduced light extracted efficiency (LEE) of LEDs. Under a driving current 350 mA, the external quantum efficiencies (EQE) of GaN-based LEDs grown on NPSSs with 0-nm, 50-nm, and 120-nm spacing increase by 43.3%, 50.6%, and 39.1%, respectively, compared to that on flat sapphire substrate (FSS). The optimized pattern spacing is 50 nm for the NPSS with 600-nm pattern period.

36 MATERIALS SCIENCE↗

Refractive index of r-cut sapphire under shock pressure range 5 to 65 GPa

High-pressure refractive index of optical window materials not only can provide information on electronic polarizability and band-gap structure, but also is important for velocity correction in particle-velocity measurement with laser interferometers. In this work, the refractive index of r-cut sapphire window at 1550 nm wavelength was measured under shock pressures of 5–65 GPa. The refractive index (n) decreases linearly with increasing shock density (ρ) for shock stress above the Hugoniot elastic limit (HEL): n = 2.0485 (± 0.0197) − 0.0729 (± 0.0043)ρ, while n remains nearly a constant for elastic shocks. This behavior is attributed to the transition from elastic (below HEL) to heterogeneous plastic deformation (above HEL). Based on the obtained refractive index-density relationship, polarizability of the shocked sapphire was also obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semipolar and nonpolar GaN epi-films grown on m-sapphire by plasma assisted molecular beam epitaxy

We hereby report the development of non-polar epi-GaN films of usable quality, on an m-plane sapphire. Generally, it is difficult to obtain high-quality nonpolar material due to the planar anisotropic nature of the growth mode. However, we could achieve good quality epi-GaN films by involving controlled steps of nitridation. GaN epilayers were grown on m-plane (10-10) sapphire substrates using plasma assisted molecular beam epitaxy. The films grown on the nitridated surface resulted in a nonpolar (10-10) orientation while without nitridation caused a semipolar (11-22) orientation. Room temperature photoluminescence study showed that nonpolar GaN films have higher value of compressive strain as compared to semipolar GaN films, which was further confirmed by room temperature Raman spectroscopy. The room temperature UV photodetection of both films was investigated by measuring the I-V characteristics under UV light illumination. UV photodetectors fabricated on nonpolar GaN showed better characteristics, including higher external quantum efficiency, compared to photodetectors fabricated on semipolar GaN. X-ray rocking curves confirmed better crystallinity of semipolar as compared to nonpolar GaN which resulted in faster transit response of the device.

36 MATERIALS SCIENCE↗

Demonstration of transverse-magnetic deep-ultraviolet stimulated emission from AlGaN multiple-quantum-well lasers grown on a sapphire substrate

We demonstrate transverse-magnetic (TM) dominant deep-ultraviolet (DUV) stimulated emission from photo-pumped AlGaN multiple-quantum-well lasers grown pseudomorphically on an AlN/sapphire template by means of photoluminescence at room temperature. The TM-dominant stimulated emission was observed at wavelengths of 239, 242, and 243 nm with low thresholds of 280, 250, and 290 kW/cm{sup 2}, respectively. In particular, the lasing wavelength of 239 nm is shorter compared to other reports for AlGaN lasers grown on foreign substrates including sapphire and SiC. The peak wavelength difference between the transverse-electric (TE)-polarized emission and TM-polarized emission was approximately zero for the lasers in this study, indicating the crossover of crystal-field split-off hole and heavy-hole valence bands. The rapid variation of polarization between TE- and TM-dominance versus the change in lasing wavelength from 243 to 249 nm can be attributed to a dramatic change in the TE-to-TM gain coefficient ratio for the sapphire-based DUV lasers in the vicinity of TE-TM switch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Si nanowire growth on sapphire: Classical incubation, reverse reaction, and steady state supersaturation

Si nanowire growth on sapphire substrates by the vapor-liquid-solid (VLS) method using Au catalyst particles has been studied. Sapphire was chosen as the substrate to ensure that the vapor phase is the only source of Si. Three hitherto unreported observations are described. First, an incubation period of 120–480 s, which is shown to be the incubation period as defined in classical nucleation theory, is reported. This incubation period permits the determination of a desolvation energy of Si from Au-Si alloys of 15 kT. Two, transmission electron microscopy studies of incubation, point to Si loss by reverse reaction as an important part of the mechanism of Si nanowire growth by VLS. Three, calculations using these physico-chemical parameters determined from incubation and measured steady state growth rates of Si nanowires show that wire growth happens from a supersaturated catalyst droplet.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Room temperature ferromagnetism in epitaxial Cr{sub 2}O{sub 3} thin films grown on r-sapphire

We report on the epitaxial growth and magnetic properties of Cr{sub 2}O{sub 3} thin films grown on r-sapphire substrate using pulsed laser deposition. The X-ray diffraction (XRD) (2θ and Φ) and TEM characterization confirm that the films are grown epitaxially. The r-plane (011{sup ¯}2) of Cr{sub 2}O{sub 3} grows on r-plane of sapphire. The epitaxial relations can be written as [011{sup ¯}2] Cr{sub 2}O{sub 3} ‖ [011{sup ¯}2] Al{sub 2}O{sub 3} (out-of-plane) and [1{sup ¯}1{sup ¯}20] Cr{sub 2}O{sub 3} ‖ [1{sup ¯}1{sup ¯}20] Al{sub 2}O{sub 3} (in-plane). The as-deposited films showed ferromagnetic behavior up to 400 K but ferromagnetism almost vanishes with oxygen annealing. The Raman spectroscopy data together with strain measurements using high resolution XRD indicate that ferromagnetism in r-Cr{sub 2}O{sub 3} thin films is due to the strain caused by defects, such as oxygen vacancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct spontaneous growth and interfacial structural properties of inclined GaN nanopillars on r-plane sapphire

The spontaneous growth of GaN nanopillars (NPs) by direct plasma-assisted molecular beam epitaxy on nitridated r-plane sapphire substrates has been studied. The emanation of metal-polarity NPs from inside an a-plane nonpolar GaN film was found to depend on both the substrate nitridation and the growth conditions. The density of NPs increased with increasing the duration of the nitridation process and the power applied on the radio-frequency plasma source, as well as the III/V flux ratio, while variation of the first two parameters enhanced the roughness of the substrate's surface. Transmission electron microscopy (TEM) techniques were employed to reveal the structural characteristics of the NPs and their nucleation mechanism from steps on the sapphire surface and/or interfacial semipolar GaN nanocrystals. Lattice strain measurements showed a possible Al enrichment of the first 5–6 monolayers of the NPs. By combining cross-sectional and plan-view TEM observations, the three-dimensional model of the NPs was constructed. The orientation relationship and interfacial accommodation between the NPs and the nonpolar a-plane GaN film were also elucidated. The NPs exhibited strong and narrow excitonic emission, suggesting an excellent structural quality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire

This paper investigates the performance of surface acoustic wave (SAW) devices consisting of reactively sputter deposited scandium doped aluminum nitride (Sc{sub x}Al{sub 1-x}N) thin films as piezoelectric layers on sapphire substrates for wireless sensor or for RF-MEMS applications. To investigate the influence of piezoelectric film thickness on the device properties, samples with thickness ranging from 500 nm up to 3000 nm are fabricated. S{sub 21} measurements and simulations demonstrate that the phase velocity is predominantly influenced by the mass density of the electrode material rather than by the thickness of the piezoelectric film. Additionally, the wave propagation direction is varied by rotating the interdigital transducer structures with respect to the crystal orientation of the substrate. The phase velocity is about 2.5% higher for a-direction compared to m-direction of the sapphire substrate, which is in excellent agreement with the difference in the anisotropic Young's modulus of the substrate corresponding to these directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Air-void embedded GaN-based light-emitting diodes grown on laser drilling patterned sapphire substrates

Air-void structure was introduced in GaN-based blue light-emitting diodes (LED) with one-step growth on periodic laser drilling patterned sapphire substrate, which free of any photolithography or wet/dry etching process. The influence of filling factors (FF) of air-void on crystal quality and optical performance were investigate. Transmission electron microscopy images and micro-Raman spectroscopy indicated that the dislocation was bended and the partially compressed strain was released. When FF was 55.43%, compared with the LED structure grown on flat sapphire substrate, the incorporation of air-void was observed to reduce the compressed stress of ∼20% and the luminance intensity has improved by 128%. Together with the simulated reflection intensity enhancement by finite difference time-domain (FDTD) method, we attribute the enhanced optical performance to the combined contribution of strong back-side light reflection of air-void and better GaN epitaxial quality. This approach provides a simple replacement to the conventional air-void embedded LED process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amplification of subpico second UV pulses in the multistage GARPUN-MTW Ti:sapphire - KrF laser system

Terawatt 248-nm UV pulses with an energy of 0.62 J, a width of no more than 1ps, and a divergence of 20 {mu}rad have been obtained in the first experiments on the GARPUN-MTW Ti:sapphire - KrF laser system at double-pass amplification of frequency-tripled pulses from the Ti:sapphire front end in wide-aperture electron-beam-pumped KrF amplifiers. The contrast of short pulses relative to the amplified spontaneous emission is found to be {approx}10{sup 6} for energy densities and {approx}10{sup 11} for intensities. The specificity of short-pulse amplification in an active medium with fast population inversion recovery and advantages of amplification of trains of short pulses or short and long pulses are discussed. The peak power of single subpicosecond pulses in this laser system can be increased to 30TW, and the focused beam intensity can be as high as 10{sup 20} W cm{sup -2}. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Creating traveling waves from standing waves from the gyrotropic paramagnetic properties of Fe{sup 3+} ions in a high-Q whispering gallery mode sapphire resonator

We report observations of the gyrotropic change in magnetic susceptibility of the Fe{sup 3+} electron paramagnetic resonance at 12.037 GHz (between spin states |1/2> and |3/2>) in sapphire with respect to the applied magnetic field. Measurements were made by observing the response of the high-Q whispering gallery doublet in a Hemex sapphire resonator cooled to 5 K. The doublets initially existed as standing waves at zero field and were transformed to traveling waves due to the gyrotropic response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robust Avalanche (1.5 kV, 2 kA/cm²) in Vertical GaN Diodes on Patterned Sapphire Substrate

The lack of avalanche capability is a key limitation of current lateral GaN devices. Despite the report of avalanche in vertical GaN-on-GaN devices, the high wafer cost hinders device commercialization. Here, in this work, we demonstrate a circuit-level avalanche in vertical GaN diodes on low-cost patterned sapphire substrate (PSS), with the avalanche voltage (1.57 kV) and avalanche current density (>2 kA/cm 2 ) both being the highest reported in GaN devices on foreign substrates. The PSS enables a lower dislocation density than conventional sapphire substrate and is employed in high-voltage GaN devices for the first time. The avalanche voltage in the circuit test reaches 98% of the parallel-plane limit, further affirming that near-ideal avalanche breakdown can be realized on GaN devices on foreign substrates. These results show the promise of the GaN-on-PSS platform for low-cost, robust power devices.

42 ENGINEERING↗

Assessment of thermodynamic stability of sapphire in eutectic molten chloride environment

The continued development of molten salt reactors requires highly efficient and stable instruments that can efficiently track monitor conditions of the molten salt during long-term application operation in both the fuel and coolant/heat transfer fluid loops. Sapphire (Al 2 O 3 ) fibers have shown tremendous potential by enabling radiation resistance and a broader operational range of temperature . Thermodynamic modeling using the ThermoCalc and the SGTE Molten Salts (SALT1) and Pure Substances (Pure5) database is done performed to understand the compatibility of Al 2 O 3 fibers with NaCl-MgCl 2 eutectic molten salt in the temperature range of 600 to 1000°C. The thermodynamic calculations show that sapphire fibers are not expected to be compatible with long term exposure to molten chloride salts within this temperature range. Furthermore, various pure metallic elements were evaluated as potential cladding materials for part of the Al 2 O 3 fibers. Based on the thermodynamic analysis, molybdenum (Mo) and nickel (Ni) could be effective cladding materials to enhance the stability of Al 2 O 3 in NaCl and MgCl 2 chloride salt molten bath in the desired temperature range. The presence of a metallic cladding leads to the suppression of aluminum dissolution from Al 2 O 3 , thus improving its stability in chloride salts. Additionally, it is also shown that Al 2 O 3 remains stable up to 2300 K in the presence of pre-existing Al 2 MgO 4 and Al 2 NiO 4 in the eutectic molten chloride bath environment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗