Search NASA⌕ Search

SEARCH · Search NASA

Results for “SODIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sodium Extraction from Full-Length Fermi-1 Blanket Assembly

Enrico Fermi Nuclear Generating Station is a nuclear power plant on the shore of Lake Erie. On October 5, 1966, Fermi 1, a prototype fast breeder reactor, suffered a partial fuel meltdown (no radioactive material was released). As a result, 34 metric tons of sodium-bonded blanket material from the decommissioned Fermi-1 reactor were shipped to and are currently stored at the Idaho Nation Lab (INL). This material is currently awaiting removal from the state of Idaho by 2035. In its current state, the Fermi-1 material is not suitable for disposal due to the reactive characteristic of its bond sodium. This work demonstrates removal of bond sodium from an entire full-length unirradiated Fermi-1 outer radial blanket assembly using a gravity assisted melt-drain-evaporate (MEDE) treatment process. Quantitative and qualitative analyses were performed to characterize the extent of sodium removal from the blanket material following MEDE treatment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Rational Electrolyte Formulation for Sodium Metal Batteries Operating in Extremely Cold Environments

Sodium metal batteries have shown considerable potential when operated at ambient temperatures. However, their performance in cold environments is constrained by increased electrolyte resistance with decreasing temperature and dendritic sodium plating associated with unstable solid electrolyte interphase (SEI), which are primarily influenced by the electrolyte composition. In this study, we present an electrolyte formulation that remains thermally stable down to −150 °C, which not only facilitates low internal resistance but also contributes to the formation of a protective SEI under cryogenic conditions. When cycled at −40 °C at 1 mA cm −2 , the sodium metal electrode exhibits a low overpotential of only 16 mV over 750 h; even at an ultra-low temperature of −80 °C, the electrode demonstrates remarkable long-term stability with a low overpotential of 54 mV sustained over 1500 h at 0.5 mA cm −2 . Furthermore, full cell evaluations when paring with Na 3 V 2 (PO 4 ) 3 cathode reveal a high average Coulombic efficiency exceeding 99.1% and a capacity retention over 83% after 100 cycles at both −40 °C and −80 °C.

Electrolyte↗
DOE OSTI2020

The sodium channel Na X : Possible player in excitation–contraction coupling

Abstract The sodium channel Na X (encoded by the SCN7A gene) was originally identified in the heart and skeletal muscle and is structurally similar to the other voltage‐gated sodium channels but does not appear to be voltage gated. Although Na X is expressed at high levels in cardiac and skeletal muscle, little information exists on the function of Na X in these tissues. Transcriptional profiling of ion channels in the heart in a subset of patients with Brugada syndrome revealed an inverse relationship between the expression of Na X and Na V 1.5 suggesting that, in cardiac myocytes, the expression of these channels may be linked. We propose that Na X plays a role in excitation–contraction coupling based on our experimental observations. Here we show that in cardiac myocytes, Na X is expressed in a striated pattern on the sarcolemma in regions corresponding to the sarcomeric M‐line. Knocking down Na X expression decreased Na V 1.5 mRNA and protein and reduced the inward sodium current ( I Na+ ) following cell depolarization. When the expression of Na V 1.5 was knocked down, ~85% of the I Na+ was reduced consistent with the observations that Na V 1.5 is the main voltage‐gated sodium channel in cardiac muscle and that Na X likely does not directly participate in mediating the I Na+ following depolarization. Silencing Na V 1.5 expression led to significant upregulation of Na X mRNA. Similar to Na V 1.5, Na X protein levels were rapidly downregulated when the intracellular [Ca 2+ ] was increased either by CaCl 2 or caffeine. These data suggest that a relationship exists between Na X and Na V 1.5 and that Na X may play a role in excitation–contraction coupling.

Bogdanovic, Elena↗
DOE OSTI2021

An insight on the effect of sodium and silicon on microstructure and crystallography of high alumina cements

In the present study the influence of minor elements (Na{sub 2}O and SiO{sub 2}) on the mineralogy, chemistry and microstructure of High Alumina Cements (HACs) has been investigated. HACs have several advantages respected to Ordinary Portland Cement (OPC) but the shortage of Al-rich raw materials represents a limiting factor: re-use of Al-rich waste as raw material represents a solution but it will add minor elements to the raw meal that could change HACs properties. For the first time, four commercial HACs, doped with sodium and silicon, and one synthetic HAC, only highly doped in sodium, were studied through a multidisciplinary approach by combining conventional and unconventional analytical techniques. Results highlighted that (i) sodium and silicon were mainly incorporated in a sodium-rich phase (Na-phase, NCA{sub 2}, Na{sub 1.9}CaAl{sub 3.9}Si{sub 0.1}O{sub 8}), (ii) no minor phases such as gehlenite and/or mayenite occurred, and (iii) CA (CaAl{sub 2}O{sub 4}) and CA{sub 2} (CaAl{sub 4}O{sub 7}) revealed a limited ionic substitution.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling the Behavior of Complex Aqueous Electrolytes Using Machine Learning Interatomic Potentials: The Case of Sodium Sulfate

Understanding the structure and thermodynamics of solvated ions is essential for advancing applications in electrochemistry, water treatment, and energy storage. While ab initio molecular dynamics methods are highly accurate, they are limited by short accessible time and length scales whereas classical force fields struggle with accuracy. Herein, we explore the structure and thermodynamics of complex monovalent-divalent ion pairs using Na 2 SO 4 (aq) as a case study by applying a machine learning interatomic potential (MLIP) trained on density functional theory (DFT) data. Our MLIP-based approach reproduces key bulk properties such as density and radial distribution functions of water. We provide the hydration structure of the sodium and sulfate ions in the 0.1–2 M concentration range and the one-dimensional and two-dimensional potentials of mean force for the sodium–sulfate ion pairing at the low concentration limit (0.1 M), which are inaccessible to DFT. At low concentrations, the sulfate ion is strongly solvated, leading to the stabilization of solvent-separated ion pairs over contact ion pairs. Minimum energy pathway analysis revealed that coordinating two sodium ions with a sulfate ion is a multistep process whereby the sodium ions coordinate to the sulfate ion sequentially. Finally, we demonstrate that MLIPs allow the study of solvated ions beyond simple monovalent pairs with DFT-level accuracy in their low concentration limit (0.1 M) via statistically converged properties from ns-long simulations.

anions↗
DOE OSTI2024

Phenolic Resin Derived Hard Carbon Anode for Sodium-Ion Batteries: A Review

Sodium-ion batteries are complementary to lithium-ion batteries for grid-scale energy storage applications due to lower cost, safety, and potential for sustainable supply chains. The past decade has witnessed enormous research efforts in developing hard carbon anode materials for sodium-ion batteries. Phenolic resins have received significant attention as hard carbon precursors due to their high carbon yield, highly cross-linked structure, low cost, mature technology, and excellent electrochemical performance of corresponding hard carbon anode. This Review exclusively highlights the state-of-the-art preparation of hard carbon from phenolic resins, and the electrochemical performance in sodium-ion batteries. Cross-linked resins are prepared from three phenolic monomers (phenol, resorcinol, and phloroglucinol) to produce hard carbon. The effects of carbonization temperature on the microstructure, and electrochemical properties of hard carbon have been summarized here. Hard carbon formation, and sodium storage mechanisms have been briefly outlined. Finally, this Review provides an industrial perspective on hard carbon production at scale.

aromatic compounds↗
DOE OSTI2026

Chemical and Structural Insights into Solid Electrolyte Interphase Evolution for Sodium Metal Electrodes

The solid electrolyte interphase (SEI) critically governs the reversibility of sodium metal batteries, through dynamically mediating ion transport and interfacial reactions. However, its kinetic evolution under operating conditions, and how it influences interfacial stability, remains poorly understood. Here, in this study, we reveal that the SEI undergoes coupled chemical and mechanical changes during sodium plating and stripping, leading to spatial and temporal heterogeneity that drives interfacial degradation. Synchrotron operando grazing-incidence wide-angle X-ray scattering and soft X-ray absorption spectroscopy capture the sequential formation and dissolution of inorganic SEI phases (NaF, NaH, NaOH, Na 2 PO 3 F), accompanied by depth-dependent alterations in organic SEI components. Mesoscale modeling connects this evolving SEI heterogeneity to localized current density fluctuations and stress accumulation at the Na interface, identifying pathways to electrically isolated sodium formation. These findings show that SEI instability fundamentally limits reversibility in sodium metal batteries, and that controlling SEI chemistry–mechanics coupling is essential to achieving its durability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dual receptor-sites reveal the structural basis for hyperactivation of sodium channels by poison-dart toxin batrachotoxin

The poison dart toxin batrachotoxin is exceptional for its high potency and toxicity, and for its multifaceted modification of the function of voltage-gated sodium channels. By using cryogenic electron microscopy, we identify two homologous, but nonidentical receptor sites that simultaneously bind two molecules of toxin, one at the interface between Domains I and IV, and the other at the interface between Domains III and IV of the cardiac sodium channel. Together, these two bound toxin molecules stabilize α/π helical conformation in the S6 segments that gate the pore, and one of the bound BTX-B molecules interacts with the crucial Lys1421 residue that is essential for sodium conductance and selectivity via an apparent water-bridged hydrogen bond. Overall, our structure provides insight into batrachotoxin’s potency, efficacy, and multifaceted functional effects on voltage-gated sodium channels via a dual receptor site mechanism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Critically assessing sodium-ion technology roadmaps and scenarios for techno-economic competitiveness against lithium-ion batteries

Sodium-ion batteries have garnered notable attention as a potentially low-cost alternative to lithium-ion batteries, which have experienced supply shortages and price volatility for key minerals. Here we assess their techno-economic competitiveness against incumbent lithium-ion batteries using a modelling framework incorporating componential learning curves constrained by minerals prices and engineering design floors. We compare projected sodium-ion and lithium-ion price trends across over 6,000 scenarios while varying Na-ion technology development roadmaps, supply chain scenarios, market penetration and learning rates. Assuming that substantial progress can be made along technology roadmaps via targeted research and development, we identify several sodium-ion pathways that might reach cost-competitiveness with low-cost lithium-ion variants in the 2030s. In addition, we show that timelines are highly sensitive to movements in critical minerals supply chains—namely that of lithium, graphite and nickel. Our modelled outcomes suggest that being price advantageous against low-cost lithium-ion variants in the near term is challenging and increasing sodium-ion energy densities to decrease materials intensity is among the most impactful ways to improve competitiveness.

25 ENERGY STORAGE↗
DOE OSTI2022

System-Level Comparison of Sodium and Salt Systems in Support of the Gen3 Liquids Pathway

This paper presents the comparison of the annual performance and the Levelised Cost of Energy (LCOE) of two high- temperature solar power tower configurations using a 565MWth chloride salt receiver and a 540 MWth liquid sodium receiver. Each power tower consists of a sodium or salt receiver, a 175 m high concrete tower, and a two-tank chloride salt system for thermal energy storage (TES). The power plants were simulated using SolarTherm to estimate their energy per year, capacity factor, and LCOE. The simulation was verified against the System Advisor Model (SAM), showing that the LCOE calculation differences are within ±1.0%. Results showed that the sodium-receiver system yields 69.60 USD/MWh real LCOE, versus 78.55 USD/MWh for the chloride salt system. Results also showed that sodium wins here due to a smaller and more efficient receiver, enabled by higher flux limits and reduced field size, leading to less mirror reflective area and site improvement cost.

capacity factor↗
DOE OSTI2025

Cesium exhibits different mesoscale segregation and ion pairing than lithium, sodium, or potassium in concentrated alkaline aqueous nitrite solutions

Understanding ion pairing in concentrated alkaline electrolytes facilitates the prediction and control of chemical processes in nuclear waste. While sodium is the dominant alkali metal in such systems, cesium often exhibits distinct bulk behavior relative to lighter alkali cations. Aqueous mixtures of cesium hydroxide and sodium nitrite were compared to alkali hydroxide analogs using small-angle x-ray scattering, revealing that cesium disrupts the sodium nitrite electrolyte structure, forming cesium-rich domains. This mesoscale segregation contrasts with the near-ideal mixing observed in other mixed hydroxide–nitrite systems. Raman spectroscopy indicates cesium–nitrite ion pairing, evidenced by vibrational shifts distinct from those associated with sodium. Multinuclear magnetic resonance spectroscopy further supports cesium–nitrite and cesium–hydroxide association, revealing a distinct local environment for nitrite in cesium-containing solutions. Together, these findings show that cesium promotes a unique solution structure dominated by specific ion pairing within segregated domains. This structural organization may influence radical generation pathways in high-ionic-strength alkaline media relevant to nuclear waste processing and management.

Nienhuis, Emily T. [Pacific Northwest National Lab↗
DOE OSTI2023

Topological electride phase of sodium at high pressures and temperatures

Sodium, a textbook example of a nearly-free-electron metal, exhibits unforeseen pressure-induced behavior including the stabilization of numerous polymorphs—some possessing extremely complex unit cells—as well as a metal-to-insulator transition to the iconic hP4 phase. However, until recently, most of the experimental and theoretical studies on solid sodium have been restricted to the low-temperature regime. In this work, using ab initio evolutionary structure searches coupled with quasiharmonic calculations, we discover seven new phases of sodium that are more stable than the known hP4 phase at pressure-temperature conditions that were recently attained in ramp-compression experiments. From these, our calculations suggest that P6 3 /m Na is the ground state between ≈250 GPa at 710 K and ≈350 GPa at 1900 K. Electronic structure calculations show that this phase is a topological semimetal with a Dirac nodal surface that is protected by a nonsymmorphic symmetry S 2z and an electride owing to its non-nuclear charge localized within one-dimensional honeycomb channels and zero-dimensional cages. Our results highlight the complexity of dense sodium's free-energy landscape and intricate electronic structure that emerges at finite temperatures and conditions where ionic cores overlap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

New constraints on sodium production in globular clusters from the Na 23 ( He 3 , d ) Mg 24 reaction

The star-to-star anticorrelation of sodium and oxygen is a defining feature of globular clusters, but, to date, the astrophysical site responsible for this unique chemical signature remains unknown. Sodium enrichment within these clusters depends sensitively on reaction rate of the sodium destroying reactions 23 Na(p, γ) and 23 Na(p,α). In this paper, we report the results of a 23 Na( 3 He,d) 24 Mg transfer reaction carried out at Triangle Universities Nuclear Laboratory using a 21 MeV 3 He beam. Astrophysically relevant states in 24 Mg between 11 < E x < 12 MeV were studied using high-resolution magnetic spectroscopy, thereby allowing the extraction of excitation energies and spectroscopic factors. Bayesian methods are combined with the distorted wave Born approximation to assign statistically meaningful uncertainties to the extracted spectroscopic factors. For the first time, these uncertainties are propagated through to the estimation of proton partial widths. Our experimental data are used to calculate the reaction rate. The impact of the new rates are investigated using asymptotic giant branch star models. Furthermore, it is found that while the astrophysical conditions still dominate the total uncertainty, intramodel variations on sodium production from the 23 Na(p, γ) and 23 Na(p,α) reaction channels are a lingering source of uncertainty.

20 ≤ A ≤ 38↗
DOE OSTI2023

Inelastic relaxation processes in amorphous sodium silicates

During fracture amorphous oxides exhibit irreversible processes, including inelastic and nonrecoverable relaxation effects in the process zone surrounding the crack tip. Here, classical molecular dynamics simulations were used with a reactive forcefield to evaluate inelastic relaxation processes in five amorphous sodium silicate compositions. Overall, the 20% Na 2 O-SiO 2 (NS20) composition exhibited the most inelastic relaxation, followed by the 15% Na 2 O-SiO 2 (NS15) composition, the 25% Na 2 O-SiO 2 (NS25) composition, and finally the 10% (NS10) and 30% (NS30) Na 2 O-SiO 2 compositions. Coordination analysis of the Na + ions identified that during inelastic relaxation the Na+ ions were increasingly coordinated by nonbridging oxygens (NBOs) for the NS10 and NS15 compositions, which was supported by radial analysis of the O-Na-O bond angles surrounding the crack tip. Across the sodium silicate compositional range, two different inelastic relaxation mechanism were identified based on the amount of bridging oxygens (BOs) and NBOs in the Na+ ion coordination shell. At lower (NS10) and higher (NS30) sodium compositions, the entire structured relaxed toward the crack tip. In contrast at intermediate sodium concentrations (NS20) the Na + ion migrates toward the crack tip separately from the network structure. By developing a fundamental understanding of how modified silica systems respond to static stress fields, we will be able to predict how varying amorphous silicate systems exhibit slow crack growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermochemical Modeling of Radionuclide Vapor-Liquid Equilibria in Sodium Pools for SFR Mechanistic Source Term Analysis

Mechanistic source term (MST) analysis of sodium fast reactors (SFR) requires understanding of various radionuclide (RN) transport phenomena influencing potential releases from the fuel to the environment. One such phenomenon includes the retention or release of RNs from the sodium coolant pool, representing the step after possible fuel failures and influencing transport to the cover gas region. Thermodynamic vapor-liquid equilibria (VLE) calculations were performed on systems representing SFR sodium pools containing oxygen impurities and radionuclide (RN) inventories. First, an assessment and recreation of a previously developed thermodynamic database was completed, including updates to thermodynamic parameters. The RN inventories used in VLE calculations represented hypothetical source terms that might be released to the pool during previously analyzed fuel failure scenarios. The calculations were performed for all possible combinations of sodium pool size (i.e., total oxygen) and number of failed fuel pins (i.e., total RNs). In this way, multiple ratios of the RN relative to the oxygen impurity (RN:O) were compared for their impact on RN volatility, which is discussed in terms of the vapor fraction (VF), defined as the fraction of the RN that is calculated to exist in the vapor phase at equilibrium above condensed phases of that element. Similar trends in VLE behavior are seen in the equilibrium calculation results for elements of similar chemistry, and for some element types, it was found that the RN:O ratio can be important due to oxide formation, which typically exist in the condensed phase.

Shahbazi, Shayan↗
DOE OSTI2025

Optimization of laser-induced breakdown spectroscopy for liquid sodium analysis

Next-generation nuclear power reactors based on liquid sodium coolant are in development to improve efficiency and safety. Fast breeder reactors could potentially achieve considerably higher fuel burn-up while producing less nuclear waste compared with current commercial technology. Monitoring of impurities in these types of reactors is important in order to prevent blockage of the cooling system or hazardous reactions due to the high reactivity of sodium with water. In this work, laser-induced breakdown spectroscopy is performed on a liquid sodium sample using a custom-built immersion probe system. The probe provides direct line of sight to the sample vessel in argon atmosphere for laser delivery and signal collection. Signatures of sodium, and impurities such as potassium and oxygen have been obtained. The probe height and immersion have a strong influence on the signal level and stability. Argon flow rates of 2 to 5 liters per minute produce no substantial change in signal, suggesting a steady laminar flowing regime. A high signal-to-noise ratio for impurity elements confirms the suitability of this technique for reliable impurity detection and monitoring in the reactor environment.

Gardette, V. [University of Michigan, Ann Arbor, M↗
DOE OSTI2021

Sodium Fire Collaborative Study Progress CNWG Fiscal Year 2021

This report discusses the progress on the collaboration between Sandia National Laboratories (Sandia) and Japan Atomic Energy Agency (JAEA) on the sodium fire research in fiscal year (FY) 2021 and is a continuation of the FY2020 progress report. In this report, we only report the changes made to the current sodium pool fire model in MELCOR. We modified and corrected many control functions to enhance the current model from the FY2020 report. This year’s enhancements relate to better agreement of the suspended aerosol measurement from JAEA’s F7 series tests. Staff from Sandia and JAEA conducted the validation studies of the sodium pool fire model in MELCOR. To validate this pool fire model with the latest enhancement, JAEA sodium pool fire experiments (F7-1 and F7-2) were used. The results of the calculation, including the code-to-code comparisons are discussed as well as suggestions for further model improvement. Finally, recommendations are made for new MELCOR simulations for FY2022.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Sodium Fire Collaborative Study Progress (CNWG Fiscal Year 2022)

This report discusses the progress on the collaboration between Sandia National Laboratories (Sandia) and Japan Atomic Energy Agency (JAEA) on the sodium fire research in fiscal year (FY) 2022 and is a continuation of the FY 2021 progress report. We only report the changes made to the current sodium pool fire model in MELCOR. We modified and corrected many control functions to enhance the fraction of oxygen consumed that reacts to form monoxide (FO2) parameter in the current model from the FY2021 report. This year's enhancements relate to better agreement of the suspended aerosol measurement from JAEA's F7 series tests. Staff from Sandia and JAEA conducted the validation studies of the sodium pool fire model in MELCOR. To validate this pool fire model with the latest enhancement, JAEA sodium pool fire experiments (F7-1 and F7-2) were used. The results of the calculation, including the code-to-code comparisons are discussed as well as suggestions for further model improvement. Finally, recommendations are made for new MELCOR simulations for FY 2023.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗