Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPHERE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Measurement of Blast Waves from Bursting Pressureized Frangible Spheres

Small-scale experiments were conducted to obtain data on incident overpressure at various distances from bursting pressurized spheres. Complete time histories of blast overpressure generated by rupturing glass spheres under high internal pressure were obtained using eight side-on pressure transducers. A scaling law is presented, and its nondimensional parameters are used to compare peak overpressures, arrival times, impulses, and durations for different initial conditions and sizes of blast source. The nondimensional data are also compared, whenever possible, with results of theoretical calculations and compiled data for Pentolite high explosive. The scaled data are repeatable and show significant differences from blast waves generated by condensed high-explosives.

Esparza, E. D.↗

Measurements of blast waves from bursting frangible spheres pressurized with flash-evaporation vapor or liquid

Incident overpressure data from frangible spheres pressurized with a flash-evaporating fluid in liquid and vapor form were obtained in laboratory experiments. Glass spheres under higher than ambient internal pressure of Freon-12 were purposely burst to obtain time histories of overpressure. Nondimensional peak pressures, arrival and duration times, and impulses are presented, and whenever possible plotted and compared with compiled data for Pentolite high-explosive. The data are generally quite repeatable and show differences from blast data produced by condensed high-explosives.

Esparaza, E. D.↗

A split sphere 60,000 ton press

A split sphere press which can have a total force of 60,000 tons applied to its exterior by a 0.55 GPa hydrostatic pressure vessel is described. The inner anvils are made of tungsten carbide and show considerable plastic deformation under load. Much greater pressures, in the 100 GPa range, are possible if diamond tipped anvils are used. Because of the uniformly loaded multi-anvil arrangement, the diamond tips can be maintained under a high degree of compressive load and therefore prevent fracture which may occur in a conventional opposed anvil arrangement. Press operation on CdS, ZnSe, ZnS, GaP, and BP samples is described, and their resistance versus external pressure on the sphere are plotted.

Wanagel, J.↗

Analyzing and modeling gravity and magnetic anomalies using the SPHERE program and Magsat data

Computer codes were completed, tested, and documented for analyzing magnetic anomaly vector components by equivalent point dipole inversion. The codes are intended for use in inverting the magnetic anomaly due to a spherical prism in a horizontal geomagnetic field and for recomputing the anomaly in a vertical geomagnetic field. Modeling of potential fields at satellite elevations that are derived from three dimensional sources by program SPHERE was made significantly more efficient by improving the input routines. A preliminary model of the Andean subduction zone was used to compute the anomaly at satellite elevations using both actual geomagnetic parameters and vertical polarization. Program SPHERE is also being used to calculate satellite level magnetic and gravity anomalies from the Amazon River Aulacogen.

Braile, L. W.↗

C-1 surface interpolation for scattered data on a sphere

An algorithm is described for constructing a smooth computable function, f, defined over the surface of a sphere and interpolating a set of n data values, u sub i, associated with n locations, P sub i, on the surface of the sphere. The interpolation function, f, will be continuous and have continuous first partial derivatives. The locations, p sub i, are not required to lie on any type of regular grid.

Lawson, C. L.↗

Theoretical study of the freezing of polystyrene sphere suspensions

A theoretical study of melting in aqueous suspensions of polystyrene spheres is presented. The Helmholtz free energies of the liquid and solid phase of the suspensions are calculated as functions of sphere number density and electrolyte concentrations. The results tend to show that the freezing curve of such suspensions is that of a conventional classical liquid with repulsive short-range interactions. The interactions can be treated satisfactorily within a slightly modified Debye-Hueckel approximation. The modifications include size correction and a correction for nonlinear screening. The results are confirmed by analogous calculations for the solid phase, and for the line along which liquid and solid free energies are equal.

Shih, W.-H.↗

Surface characteristics of metallic glass spheres of Au(55)Pb(22.5)Sb(22.5)

It is pointed out that the production of metallic glasses of high atomic number is currently of considerable importance for inertial confinement fusion (ICF) target applications. In connection with the present investigation, spherules of the alloy Au(55)Pb(22.5)Sb(22.5) were produced. Metallic glass was formed on solidification. With the aid of X-ray diffraction studies, it was established that the spheres were completely amorphous. A near-surface phase separation on spheres of the metallic glass could be observed. Energy dispersive spectroscopy (EDS) measurements showed that the average composition of the surface differed from that of the bulk.

Lee, M. C.↗

Multiple Equilibria of the Barotropic Vorticity Equation on a Sphere

Multiple states of the barotropic vorticity equation in which the balance is between the first and third terms on the r.h.s. of (1) are given. Solutions of this type were also considered by Charney and Devore (1979) in their discussion of thermally, rather than topographically, forced waves. Whereas in the case of topographic forcing the multiplicity arises from what they called form-drag instability in the wave-zonal flow interaction, in the thermal forcing case the associated instability appears to be the Rossby-wave instability discussed by Lorenz (1972), and the multiple states of the highly truncated model proved to be unstable when more degrees of freedom were added. The multiple statistically steady solutions described are thus novel in that they do not involve form-drag instability, they have stable statistics in calculations with a large number of degrees of freedoms, and they occur on the sphere, with no artificial confinement in a resonant cavity. Furthermore, the solutions are obtained with no external forcing of the zonal flow. The full non-linear equations for two-dimensional non-divergent motion between smooth, rigid boundaries on a sphere were used.

Suarez, M. J.↗

Acoustic radiation potential on a sphere in plane, cylindrical, and spherical standing wave fields

The method of Gor'kov is applied for deriving the acoustic radiation potential on a sphere in an arbitrary sound field. Generalized potential and force expressions are derived for arbitrary standing wave modes in rectangular, cylindrical, and spherical geometries for the case where the sphere radius is much smaller than the wavelength. Criteria for determining radiation-potential minima are derived and examples of characteristic spatial radiation-potential profiles are presented. Single modes that can sustain stable positioning are discussed for each geometry. The localizing force strengths for representative standing wave modes in the three geometries are also compared. The positioning of samples due to acoustic forces only are considered. However, the method developed is general and is extended to include gravity or other external forces.

Barmatz, M.↗

Storing Chemicals in Packed Spheres

Reactants released by crushing or puncturing. Agglomerated gas-filled spheres hexagonally close packed and sintered or glued together into rods strung together at ends. Rods fed into crushing machine to release material in spheres as needed.

Wang, T. G.↗

Optical multiple sample vacuum integrating sphere

An integrating sphere comprised of a uniform difusely reflecting spherical cavity, having mutually transverse input and output ports, and a linear sample transport mechanism is described. The sample transport mechanism is secured so that the multiple samples can be brought into registration with the input port, one at a time, without having to open or disassemble the apparatus when a change of sample is desired. A vacuum tight seal is provided between the cavity and the transport mechanism. This maintains the integrity of a vacuum generated with the sphere when attached to the source of optical energy. The device is utilized to test emissive characteristics such as the relative fluorescence quantum efficiency of a dye sample placed in the path of a monochromatic optical energy source coupled to the input port while having a light detector coupled to the output port.

Butner, C. L.↗

The dissolution or growth of a sphere

The problem of the dissolution or growth of an isolated stationary sphere in a large fluid body is analyzed. The motion of the boundary as well as the the resulting motion in the liquid are properly taken into account. The governing equations are solved using a recently developed technique (Subramanian and Weinberg, 1981) which employs an asymptotic expansion in time. Results for the radius of the sphere as a function of time are calculated. The range of utility of the present solution is established by comparison with a numerical solution of the governing equations obtained by the method of finite differences.

Shankar, N.↗

Integrating sphere transmissometer for field measurement of leaf transmittance

A simple field-rated transmissometer is described for rapidly determining the normal hemispherical transmittance T(0 deg, 2 pi) of leaves measured in situ in the four Landsat wavelength bands. The transmissometer requires direct solar illumination of the leaf sample. It collects the transmitted light with an integrating sphere and measures the collected light using a commercially available radiometer. The transmittances determined by the transmissometer are comparable with those measured by a labortory spectrophotometer with an integrating sphere attachment.

Vanderbilt, V. C.↗

Explicit solution of the spectral radiance in integrating spheres with application to the Earth Radiation Budget Experiment ground calibration

An explicit solution of the spectral radiation leaving an arbitrary point on the wall of a spherical cavity with diffuse reflectivity is obtained. A general measurement equation is obtained that describes the output of a sensor measuring the sphere output within a given field of view and with specified angular and spectral responses. The results are applied to the Earth Radiation Budget Experiment (ERBE) integrating sphere. It is shown that by using appropriate interpretation and processing, a high-accuracy shortwave calibration of the ERBE sensors can be achieved.

Halyo, Nesim↗

Collisional properties of ice spheres at low impact velocities

The results of experimental studies on the impact properties of water ice are discussed. Stable temperatures of 85 K and pressures as low as 10 to the -5th Torr were achieved using a new apparatus consisting of a compound disk pendulum and a stainless steel, temperature-controlled cryostat. The coefficient of restitution as a function of velocity was obtained for ice spheres with four different radii of curvature and with a variety of surface conditions. These data can be well fitted by an exponetial law epsilon of given form for most measurements. Surface conditions can drastically alter the resulting value of epsilon, however. In particular, the presence of frost or a roughened contact surface can lower epsilon at a given velocity by 10-30 percent from that of a smooth sphere. It is shown how the presence of frost can change the velocity behavior of epsilon from an exponential to a power-law form. The applications of the results to the dynamics of Saturn's rings are discussed.

Hatzes, Artie P.↗

Acoustic radiation force on a heated sphere including effects of heat transfer and acoustic streaming

A previous theoretical result on the subject of the acoustic radiation force on a heated sphere (Lee and Wang, 1984) is reexamined. For a more complete understanding, effects of heat transfer and acoustic streaming are taken into consideration. Essentially, it was found that, at high sound-pressure levels in a steady situation, the force is not affected significantly by the temperature profile, consistent with the result of an experimental work (Leung and Wang, 1985). This resolves the earlier apparent contradiction between the theory and the experiment. If excessive hot air is accumulated around the sphere, which can happen in transient situations, the force can be weakened or reversed in sign. A heat transfer model due to acoustic streaming was also found.

Lee, Chun P.↗

Integrating sphere and hemisphere calibration update

This background information relates to the conclusions reached about the GSFC/Optronic calibrations for the 6-foot sphere. Both the hemispherical and the spherical integrating sources were remeasured in February 1988 by two experimenters and the results show a decrease in the output of the sphere. But the discrepancy between GSFC data and Optronic Data remains. The decrease in the output can be accounted for by a correction in the current value of power supplies Number 2 and Number 3. The supplies were running about 1.75 percent high. Minor differences were noted in the short wavelength end of the hemisphere. Efforts to resolve the discrepancy between GSFC and Optronic Labs as well as improve the ability to make more accurate and precise measurements are underway.

Mclean, J. T.↗