Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUGARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Novel DDR Processing of Corn Stover Achieves High Monomeric Sugar Concentrations from Enzymatic Hydrolysis (230 g/L) and High Ethanol Concentration (10% v/v) During Fermentation

Distilling and purifying ethanol, butanol, and other products from second and later generation lignocellulosic biorefineries adds significant capital and operating cost for biofuels production. The energy costs associated with distillation affects plant gate and life cycle analysis costs. Lower titers in fermentation due to lower sugar concentrations from pretreatment increase both energy and production costs. In addition, higher titers decrease the volumes required for enzymatic hydrolysis and fermentation vessels. Therefore, increasing biofuels titers has been a research focus in renewable biofuels production for several decades. In this work, we achieved over 200 g/L of monomeric sugars after high solids enzymatic hydrolysis using the novel deacetylation and disc refining (DDR) process on corn stover. The high sugar concentrations and low chemical inhibitor concentrations from the DDR process allowed ethanol titers as high as 82 g/L in 22 hours, which translates into approximately 10 vol% ethanol. To our knowledge, this is the first time that 10 vol% ethanol in fermentation derived from corn stover without any sugar concentration or purification steps has been reported. Techno-economic analysis shows the higher titer ethanol achieved from the DDR process could significantly reduce the minimum ethanol selling price from cellulosic biomass.

09 BIOMASS FUELS↗

Effect of biomass liquefaction on glucose and xylose prices predicted by National Renewable Energy Laboratory biochemical sugar model

Abstract The National Renewable Energy Laboratory (NREL) published a model in 2017 that enables the minimum selling price of lignocellulosic sugar to be calculated. The model can be modified to suit any biomass feedstock and operational design. In the present case, the model is used to understand the economics of a process configuration that incorporates liquefaction as a preprocessing step in corn‐stover‐fed biorefinery. This study demonstrates a quantitative approach utilizing an existing biorefinery setup to simulate the biomass liquefaction technique while estimating the price of the resulting sugar product. The objective is to understand whether the addition of liquefaction methodology – and the substitution of acid pretreatment – can reduce the cost of lignocellulosic sugars. The reason for setting up a liquefaction unit at the start is to reduce the yield stress of biomass slurry so that the flow remains unrestricted downstream. The liquefaction process is also unique because it uses no chemicals and saves the cost of pretreatment. The pretreatment step is bypassed because the output of liquefaction can be fed into enzyme hydrolysis just after simple cooking. The liquefaction process can be performed in three modes: enzyme, enzyme mimetic, and a combination of enzyme and enzyme mimetic. The results from the BC1707 model indicate the minimum cost for the enzyme liquefaction route. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Improvement of Methane Production from Sugar Beet Wastes Using TiO{sub 2} and Fe{sub 3}O{sub 4} Nanoparticles and Chitosan Micropowder Additives

An experimental study was performed to measure biogas production from sugar beet waste, which is, in fact, the chopped parts of the sugar beet not going through the sugar extraction process, at different additive concentrations. Medium molecular weight chitosan in microsize and TiO{sub 2} and Fe{sub 3}O{sub 4} nanoparticles were added to ten experimental reactors to investigate their effect on the anaerobic digestion process. Three different concentrations of 0.01, 0.04, and 0.12% w/w were used for each additive. Biogas production and methane content were compared with a control sample containing no additive. Adding chitosan in powder form did not help the process nor improved methanogenic activities. The results showed no effect on anaerobic digestion by the addition of TiO{sub 2} nanoparticles in the mentioned concentrations, whereas adding Fe{sub 3}O{sub 4} nanoparticles led to a slight increase in methane production and in volatile solid and total solid reduction. The maximum enhancement in methane and biogas production in the sample containing 0.04% Fe{sub 3}O{sub 4}, as compared with the control sample, reached 19.77% and 15.09%, respectively.

60 APPLIED LIFE SCIENCES↗

Metabolic engineering reveals the relative importance of different sugar catabolic pathways during consumption of plant biomass by Aspergillus niger

To evaluate the impact of individual sugar catabolic pathways on the physiology of A. niger when using plant biomass as a carbon source, key pathways converting plant biomass derived monomers were blocked. The resulting deletion mutants were analyzed using wheat bran and sugar beet pulp as substrates. On both substrates, the strongest affected single-pathway mutants were the pentose catabolic pathway (PCP) (Δ xkiA ) and glycolysis (Δ hxkA Δ glkA ) deficient mutants. On wheat bran, which is rich in pentose sugars, blocking the PCP by deletion of xkiA strongly impacted both growth and gene expression. However, the effect was even stronger in Δ hxkA Δ glkA and similar to a strain in which all pathways were blocked, highlighting the crucial role of glycolysis and/or carbon catabolite repression in A. niger physiology. These results demonstrate the complexity of A. niger metabolism during growth on plant biomass and provide insights into aspects to consider during metabolic engineering to obtain fungal cell factories.

aspergillus niger↗

Integrated Data Collection Analysis (IDCA) Program — KClO 3 (as received)/Icing Sugar

The Integrated Data Collection Analysis (IDCA) program is conducting a proficiency study for Small-Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are the results for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of a mixture of KClO 3 as received from the manufacturer mixed with icing sugar, sized through a 100-mesh sieve—KClO 3 /icing sugar (AR) mixture. This material was selected because of the challenge of performing SSST testing of a mixture of two solid materials. The mixture was found to: 1) be more sensitive to impact than RDX, similar to PETN, 2) be the same or less sensitive to friction than PETN, and 3) to be less sensitive to spark than RDX. The thermal analysis showed that the mixture has thermally stability similar to RDX and is perhaps more energetic upon decomposition but variable results indicate sampling issues. Compared to the 100-mesh sieved counter part, the KClO 3 /icing sugar (-100) mixture, the AR mixture was found to be about the same sensitivity towards impact, friction and ESD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of High Performance Lubricants from Cellulosic Sugar

Certain classes of fatty acids are valuable raw materials that can used to produce bio-based lubricants; however, their broader use has been limited by the high cost and limited availability. The project described in this report was focused on producing a fatty acid methyl ester (FAME) of a specific chain length from cellulosic sugars. Development of a biological pathway and engineered organisms for production of low-cost FAME from cellulosic sugar is a novel and potentially disruptive technology that is supportive of BETO’s mission to displace all fractions of a barrel of crude oil. The project was organized around four tasks that focus on A) production pathway engineering, B) host strain engineering, C) assembly of production pathway in host strain, and D) fermentation process development. Pathway engineering focused on discovery and improvement of two key pathway enzymes, namely 3-keto acetyl CoA synthase (KAS) and wax ester synthase (WES). Both enzymes were improved using a variety of enzyme engineering and mutagenesis approaches, and assembled into a host strain with relevant additional pathway genes and genome modifications. Assembled strains were evaluated in 2-L benchtop fermenters using a commercially produced cellulosic hydrolysate to supply carbon source for FAME production. These evaluations demonstrated that performance targets and final milestones were met or exceeded for sugar uptake rate, product titer, product specificity, and production rate.

60 APPLIED LIFE SCIENCES↗

Bioconversion of Pelletized Big Bluestem, Switchgrass, and Low-Diversity Grass Mixtures Into Sugars and Bioethanol

Three crops of warm-season grasses are being developed for biomass production on northern rain-fed marginal farmland: big bluestem (BBS), switchgrass (SG), and a low diversity mixture of grasses (LDM). In this study, biomass harvested from established fields were compared for pelletization and subsequent conversion to sugars and ethanol. Each biomass was successfully pelletized to similar bulk densities without adding a binder at a commercial feed operation. Pelletizing increased the bulk density by 407% on average and was equally effective on all three biomass samples (528–554 kg/m 3 ). Chemical analysis of the samples indicated that glucan and xylan contents were slightly reduced during pelletizing (by 23 and 16 g/kg, respectively), as well as theoretical ethanol yields, which are based upon total carbohydrate contents. Pellets and milled straws were pre-treated with either liquid hot-water or low-moisture ammonium hydroxide (LMA) and subsequently hydrolyzed with cellulases. Glucose and total sugar yields were similar for non-pellets and pellets using either pre-treatment; carbohydrates present in pellets were more efficiently recovered compared to non-pellets. LMA pretreated samples were separately hydrolyzed and fermented to ethanol using Scheffersomyces stipitis yeast. Hydrolysis recovered 69.7–76.8% of the glucose and 66.5–73.3% of the xylose across all samples. Glucose yields were 251–279 g/kg, db and were significantly lower for SG as compared to the other biomass samples. Recovered sugars were fermented to ethanol at 77.7–86.7% of theoretical yield. As a result, final ethanol yields (245.9–275.5 L/Mg, db) were similar for all of the grasses and estimated to equate to production levels for BBS, LDM, and SG of 1,952, 2,586, and 2,636 l of ethanol per ha, respectively.

59 BASIC BIOLOGICAL SCIENCES↗

Formate as an Energy Source to Allow Sugar Fermentation with No Net CO2 Generation: Integration of Electrochemistry with Fermentation

This poster summarizes at a high-level the scope of various groups' work on Formate as an Energy Source to Allow Sugar Fermentation with No Net CO2 Generation: Integration of Electrochemistry with Fermentation. The goals of this research are to develop and demonstrate an integrated process that electrochemically generates formate from CO2 and use the formate as an energy source for the fermentation of sugars to fatty acid methyl esters (FAME) without net CO2 generation wherein formate provides reducing equivalents for sugar fermentation and a chemical looping reactor system takes advantage of intermittent low-cost electricity from wind and solar resources.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

An Ionic Liquid Reaction and Separation Process for Production of Hydroxymethylfurfural from Sugars

There has been world-wide interest to making plastics out of renewable biomass feedstock for recent years. Hydroxymethylfurfural (HMF) is viewed as an attractive alternate to terephthalic acid (TPA) for production of polyesters (PET) and polyamides. Conversion of sugars into HMF has been studied in numerous publications. In this work, a complete ionic liquid reaction and separation process is presented for nearly stoichiometric conversion of fructose into HMF. Different adsorbent materials are evaluated and silicalite material is demonstrated effective for isolation of 99% pure HMF from actual ionic liquid reaction mixtures and for recovery of the un-converted sugars and reaction intermediate along with the ionic liquid. Membrane-coated silicalite particles are prepared and studied for a practical adsorption process operated at low pressure drops but with separation performances comparable or better than the powder material. Complete conversion of fresh fructose feed into HMF in the recycled ionic liquid is shown under suitable reaction conditions. Stability of HMF product is characterized. A simplified process flow diagram is proposed based on these research results, and the key equipment such as reactor and adsorbent bed is sized for a plant of 200,000 ton/year of fructose processing capacity. The proposed HMF production process is much simpler than the current paraxylene (PX) manufacturing process from petroleum oil, which suggests substantial reduction to the capital cost and energy consumption be possible. At the equivalent value to PX on the molar basis, there can be a large gross margin for HMF production from fructose and/or sugars.

Liu, Wei↗

Hydrolysis of lignocellulose by anaerobic fungi produces free sugars and organic acids for two–stage fine chemical production with Kluyveromyces marxianus

Development of the bioeconomy is driven by our ability to access the energy-rich carbon trapped in recalcitrant plant materials. Current strategies to release this carbon rely on expensive enzyme cocktails and physicochemical pretreatment, producing inhibitory compounds that hinder subsequent microbial bioproduction. Anaerobic fungi are an appealing solution as they hydrolyze crude, untreated biomass at ambient conditions into sugars that can be converted into value-added products by partner organisms. However, some carbon is lost to anaerobic fungal fermentation products. To improve efficiency and recapture this lost carbon, we built a two-stage bioprocessing system pairing the anaerobic fungus Piromyces indianae with the yeast Kluyveromyces marxianus, which grows on a wide range of sugars and fermentation products. In doing so we produce fine and commodity chemicals directly from untreated lignocellulose. P. indianae efficiently hydrolyzed substrates such as corn stover and poplar to generate sugars, fermentation acids, and ethanol, which K. marxianus consumed while producing 2.4 g/L ethyl acetate. An engineered strain of K. marxianus was also able to produce 550 mg/L 2-phenylethanol and 150 mg/L isoamyl alcohol from P. indianae hydrolyzed lignocellulosic biomass. Despite the use of crude untreated plant material, production yields were comparable to optimized rich yeast media due to the use of all available carbon including organic acids, which formed up to 97% of free carbon in the fungal hydrolysate. Furthermore, this work demonstrates that anaerobic fungal pretreatment of lignocellulose can sustain the production of fine chemicals at high efficiency by partnering organisms with broad substrate versatility.

59 BASIC BIOLOGICAL SCIENCES↗

Pretreatment of Miscanthus×giganteus using aqueous ammonia with hydrogen peroxide to increase enzymatic hydrolysis to sugars

Miscanthus×giganteus ( M.×giganteus ) is a potential source for bioethanol or other useful products. Pretreatment of lignocellulosic biomass is an essential step prior to enzymatic hydrolysis to sugars and fermentation to bioethanol. Here, a one-step process uses aqueous ammonia with or without hydrogen peroxide; a proposed two-step process uses aqueous ammonia in the first step and hydrogen peroxide in the second step. In the two-step process, overall 89.5% lignin is removed. The pretreated biomass is followed by using cellulase and β-glucosidase to convert cellulose and hemicellulose from the recovered solid to fermentable sugars. The conversion of cellulose to glucose is 90.2% and to xylose is 73.4%. Characterization data are obtained for the recovered solid using scanning electron microscopy (SEM), attenuated total reflection-infrared spectroscopy (ATR-IR), and X-ray diffraction (XRD) for better understanding of the two-step process. Results from the two-step process using aqueous ammonia and hydrogen peroxide separately are much better than those from the one-step process for removing lignin and for enhancing conversion to sugars by enzymatic hydrolysis.

aqueous ammonia↗

Methods to Activate and Elucidate Complex Endogenous Sugar Metabolism in Yarrowia lipolytica

Yarrowia lipolytica has endogenous metabolism to use complex sugars derived from lignocellulosic biomass. However, many of these pathways are cryptic and hence either inactive or inefficient for xylose, arabinose, and cellobiose assimilation. Furthermore, we present collective methods to activate and elucidate these endogenous sugar pathways by performing short-term growth adaptation, determining the pathway efficiency, and conducting transcriptomic, enzymatic, and metabolic analyses to identify rate limiting steps for enhanced sugar consumption.

59 BASIC BIOLOGICAL SCIENCES↗

Fermentation of sweet sorghum derived sugars to butyric acid at high titer and productivity by a moderate thermophile Clostridium thermobutyricum at 50 °C

In this study, a moderate thermophile Clostridium thermobutyricum is shown to ferment the sugars in sweet sorghum juice treated with invertase and supplemented with tryptone (10 g L –1 ) and yeast extract (10 g L –1 ) at 50 °C to 44 g L –1 butyrate at a calculated highest volumetric productivity of 1.45 g L –1 h –1 (molar butyrate yield of 0.85 based on sugars fermented). This volumetric productivity is among the highest reported for batch fermentations. Sugars from acid and enzyme-treated sweet sorghum bagasse were also fermented to butyrate by this organism with a molar yield of 0.81 (based on the amount of cellulose and hemicellulose). By combining the results from juice and bagasse, the calculated yield of butyric acid is approximately 90 kg per tonne of fresh sweet sorghum stalk. Here, this study demonstrates that C. thermobutyricum can be an effective microbial biocatalyst for production of bio-based butyrate from renewable feedstocks at 50 °C.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-Based Annotation of a Novel Sugar Isomerase from the Pathogenic E. coli O157:H7

Prokaryotes can use a variety of sugars as carbon sources in order to provide a selective survival advantage. The gene z5688 found in the pathogenic Escherichia coli O157:H7 encodes a 'hypothetical' protein of unknown function. Sequence analysis identified the gene product as a putative member of the cupin superfamily of proteins, but no other functional information was known. We have determined the crystal structure of the Z5688 protein at 1.6 {angstrom} resolution and identified the protein as a novel E. coli sugar isomerase (EcSI) through overall fold analysis and secondary-structure matching. Extensive substrate screening revealed that EcSI is capable of acting on D-lyxose and D-mannose. The complex structure of EcSI with fructose allowed the identification of key active-site residues, and mutagenesis confirmed their importance. The structure of EcSI also suggested a novel mechanism for substrate binding and product release in a cupin sugar isomerase. Supplementation of a nonpathogenic E. coli strain with EcSI enabled cell growth on the rare pentose d-lyxose.

59 BASIC BIOLOGICAL SCIENCES↗

Detection of Agar, by Analysis of Sugar Markers, Associated with Bacillus Anthracis Spores, After Culture

Detection of small quantities of agar associated with spores of Bacillus anthracis could provide key information regarding its source or growth characteristics. Agar, widely used in growth of bacteria on solid surfaces, consists primarily of repeating polysaccharide units of 3,6-anhydro-L-galactose (AGal) and galactose (Gal) with sulfated and O-methylated galactoses present as minor constituents. Two variants of the alditol acetate procedure were evaluated for detection of potential agar markers associated with spores. The first method employed a reductive hydrolysis step, to stabilize labile anhydrogalactose, by converting to anhydrogalactitol. The second eliminated the reductive hydrolysis step simplifying the procedure. Anhydrogalactitol, derived from agar, was detected using both derivatization methods followed by gas chromatography-mass spectrometry (GC-MS) analysis. However, challenges with artefactual background (reductive hydrolysis) or marker destruction (hydrolysis) lead to the search for alternative sugar markers. A minor agar component, 6-O-methyl galactose (6-O-M gal), was readily detected in agar-grown but not broth-grown bacteria. Detection was optimized by the use of gas chromatography-tandem mass spectrometry (GC-MS-MS). With appropriate choice of sugar marker and analytical procedure, detection of sugar markers for agar has considerable potential in microbial forensics.

59 BASIC BIOLOGICAL SCIENCES↗

Separation of sugars and phenolics from the heavy fraction of bio-oil using polymeric resin adsorbents

This work describes the equilibrium and kinetic adsorption of levoglucosan and a mixture of phenolic species from an aqueous solution on two polymeric resin adsorbents, SP207 and XAD4. The separation of sugars from phenolic species is of interest as these species comprise a product stream from a unique fractionating bio-oil recovery system. Levoglucosan is the major sugar present in this product stream, with mannose, xylose, galactose, and cellobiosan present in minor extents. The phenolic species are a complex mixture of mono- and di-substituted phenols; however, we treat them as a single group of similar chemical species that must be removed before the aqueous sugar solution can be used as fermentation substrate. Adsorption isotherms and mass transfer coefficients were determined at 22 °C. Levoglucosan isotherms were fit with linear and Langmuir models. Phenolic species isotherms were fit with both Langmuir and Freundlich models although they more clearly exhibited Langmuir adsorption behavior. Adsorption equilibria show that both polymeric resins have an order of magnitude greater mass adsorption capacity for phenolic species compared to levoglucosan when the mixture is used as the applied solution. However, the kinetics of adsorption are approximately an order of magnitude slower for phenolic species versus levoglucosan. Here, the equilibrium-dispersive model for column chromatography was applied using the determined adsorption equilibria and kinetic parameters and compared to column elution experiments. The model provided a good fit to the column data; however, the fit was improved by replacing the single component isotherms with competitive Langmuir isotherm expressions and modestly lowering the phenolics mass transfer coefficient.

09 BIOMASS FUELS↗

Click-Chemistry-Based Free Azide versus Azido Sugar Detection Enables Rapid In Vivo Screening of Glycosynthase Activity

Engineering of carbohydrate-active enzymes such as glycosynthases to enable chemoenzymatic synthesis of bespoke oligosaccharides has been limited by the lack of suitable ultrahigh-throughput screening methods capable of robustly detecting either starting substrates or end-products of the glycosidic bond formation reaction. Currently, there are limited screening methods available for rapid and highly sensitive single-cell-based screening of glycosynthase enzymes employing azido sugars as activated donor glycosyl substrates. Here, we report a fluorescence-based approach employing click-chemistry for the selective detection of glycosyl azides as substrates versus free inorganic azides as reaction products that facilitated an ultrahigh-throughput in vivo single-cell-based assay of glycosynthase activity. This assay was developed based on the distinct differences observed in relative fluorescence intensity of the triazole-containing fluorophore product formed during the click-chemistry reaction of organic glycosyl azides versus inorganic azides. This discovery formed the basis for proof of concept validation of a directed evolution methodology for screening and sorting glycosynthase mutants capable of synthesis of targeted fucosylated oligosaccharides. Our screening approach facilitated fluorescence-activated cell sorting of an error-prone polymerase chain reaction-based mutant library of fucosynthases expressed in Escherichia coli to identify several novel mutants that showed increased activity for ß-fucosyl azide-activated donor sugars toward desired acceptor sugars (e.g., pNP-xylose and lactose). Finally, we discuss avenues for improving this proof of concept in vivo assay method to identify better glycosynthase mutants and further demonstrate the broader applicability of this screening methodology for synthesis of bespoke glycans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Basis for the Stereochemical Control of Amine Installation in Nucleotide Sugar Aminotransferases

Sugar aminotransferases (SATs) are an important class of tailoring enzymes that catalyze the 5'-pyridoxal phosphate (PLP)-dependent stereo- and regiospecific installation of an amino group from an amino acid donor (typically l-Glu or l-Gln) to a corresponding ketosugar nucleotide acceptor. Herein we report the strategic structural study of two homologous C4 SATs (Micromonospora echinospora CalS13 and Escherichia coli WecE) that utilize identical substrates but differ in their stereochemistry of aminotransfer. This study reveals for the first time a new mode of SAT sugar nucleotide binding and, in conjunction with previously reported SAT structural studies, provides the basis from which to propose a universal model for SAT stereo- and regiochemical control of amine installation. Specifically, the universal model put forth highlights catalytic divergence to derive solely from distinctions within nucleotide sugar orientation upon binding within a relatively fixed SAT active site where the available ligand bound structures of the three out of four representative C3 and C4 SAT examples provide a basis for the overall model. Importantly, this study presents a new predictive model to support SAT functional annotation, biochemical study and rational engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗