Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample preparation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Comparison of two methods of performing the Thellier experiment

Two methods for performing the Thellier experiment on paleointensity determinations are compared. The first method is essentially that of Coe (1967) and the second is a slight modification of it. Prepared samples containing different species of magnetic particles are used, and both methods are always performed on the same sample. The study is designed to accent procedural differences between the two methods. It is shown that only the Coe method yields linear PNRM-PTRM (Partial ThermoRemanent Magnetization) plots for single domain and pseudo-single domain particles, because it maintains the symmetry between high-temperature VRM (Viscous Remanent Magnetization) and spontaneous decay, whereas for the modified Coe method the spontaneous decay is enhanced. For multidomain remanence, even the Coe method yields a nonlinear concave-up PNRM-PTRM plot. Paleointensity determinations employing only the ratio NRM/TRM provide no means of evaluating the reliability of the results.

Levi, S.↗
NASA NTRS1976

The NASA Space Processing Program

The program is intended to initiate utilization of spaceflight for economically beneficial activities in all branches of materials science and technology. In view of the prospect they offer for reducing the costs of space operations, the Spacelab and Space Shuttle are expected to become widely used for work on materials early in the 1980's. At first they will be employed for space experiments and for services, such as sample preparation, that support research and development activities on the ground. Orbital manufacturing operations are expected to develop as well when research has prepared an adequate basis for them. During the past year, NASA has initiated a series of rocket flights on which prospective participants in the Shuttle/Spacelab program can perform preliminary experiments. Participation in these flights is open to investigators from all countries, and experiments are being solicited from private sponsors also. NASA is performing concurrent definition studies of Shuttle/Spacelab payloads, and design work on equipment for the first two years of operations is planned to begin early in 1977. The Office of Applications currently plans to fly two space processing payloads on Orbital Flight Test missions in 1980 and two on operational Spacelab missions in 1981.

Bredt, J. H.↗
NASA NTRS1976

Bio-gas production from alligator weeds

Laboratory experiments were conducted to study the effect of temperature, sample preparation, reducing agents, light intensity and pH of the media, on bio-gas and methane production from the microbial anaerobic decomposition of alligator weeds (Alternanthera philoxeroides. Efforts were also made for the isolation and characterization of the methanogenic bacteria.

Latif, A.↗
NASA NTRS1977

Solubilization of coal in organic media

The use of solvent extraction to solubilize coal is discussed. Simple extractions are described which are conducted at moderate temperatures to exclude extraneous chemical reactions which would lead to uncontrolled changes in the components of the treated coal. Sample preparation, extraction apparatus, and the determination of extract yield for different experiments are also described.

Lahaye, P.↗
NASA NTRS1976

76535 - Thermal history deduced from pyroxene precipitation in anorthite

Plagioclase in the slowly cooled lunar troctolite 76535 contains abundant rows of inclusions shown by transmission electron microscopy, electron diffraction, and X-ray energy analysis to consist mainly of augite, pigeonite, orthopyroxene, pores, and an unidentified phase which is preferentially thinned out during sample preparation. A minor inclusion is Ni-Fe metal. The pyroxenes are interpreted to have exsolved from plagioclase in the solid state.

Nord, G. L., Jr.↗
NASA NTRS1977

Auger spectroscopic examination of MgF2-coated Al mirrors before and after UV irradiation

Magnesium fluoride protected Al films were studied since these mirrors are commonly used in astronomical instruments whenever a highly reflecting optical surface is required in the wavelength region from 1100 A to 2000 A. Freshly prepared samples of evaporated Al + 250-A thick MgF2 on glass were analyzed by Auger electron spectroscopy in conjunction with surface erosion by Ar(+) ion bombardment before and after UV irradiation. The analysis showed that a very thin layer of surface contamination and not bulk photolysis in the MgF2 film was reponsible for the irradiation-induced reflectance loss. Postirradiation polishing with a mild calcium carbonate abrasive can restore a mirror's reflectance by removing the photolyzed surface film without disturbing the MgF2 layer.

Heaney, J. B.↗
NASA NTRS1977

Imaging natural materials with a quasi-microscope

A Viking lander camera with auxilliary optics mounted inside the dust post was evaluated to determine its capability for imaging the inorganic properties of granular materials. During mission operations, prepared samples would be delivered to a plate positioned within the camera's field of view and depth of focus. The auxiliary optics would then allow soil samples to be imaged with an 11 pm pixel size in the broad band (high resolution, black and white) mode, and a 33 pm pixel size in the multispectral mode. The equipment will be used to characterize: (1) the size distribution of grains produced by igneous (intrusive and extrusive) processes or by shock metamorphism, (2) the size distribution resulting from crushing, chemical alteration, or by hydraulic or aerodynamic sorting; (3) the shape and degree of grain roundness and surface texture induced by mechanical and chemical alteration; and (4) the mineralogy and chemistry of grains.

Bragg, S.↗
NASA NTRS1977

Novel duplex vapor-electrochemical method for silicon solar cells

Silicon obtained by the SiF4-Na reaction was analyzed by spark source mass spectrometry (SSMS). Silicon samples prepared from induction melted powder were evaluated for electrical properties using four point probe conductivity and thermoelectric methods. SiF4-Na reaction under P sub SiF4 greater than 1 atmosphere. The amount of silicon produced was increased from 25 g per batch (in the glass reactor) to greater than 70 g per batch in the stainless steel reactor. The study of the effects of reaction variables such as P sub SiF4 and maximum temperature attained on the particle size of silicon powder showed that the silicon particle size tends to grow larger with increasing pressure of the SiF4 gas in the reaction system.

Kapur, V. K.↗
NASA NTRS1979

NR-150 adhesive development

A polyimide precursor adhesive solution, code-named NR-056X, was developed. It reproducibly gives low void, high strength bond lines at both room temperature and 589K (600 F) using either titanium or graphite/polyimide composite adherends having 12.7 mm (1/2 in.) overlaps. Lap shear samples prepared using this adhesive and composite adherends based on graphite/NR-150B2 were shown to have a high degree of resistance to such adverse environments as air at 589K (600 F), high humidity, methyl ethyl ketone and jet fuel. Bond line toughness was illustrated by the complete resistance to cracking in the wedge-crack propagation test. The available evidence indicates that wide area composite to composite or composite to metal bonding should be feasible.

Blatz, P. S.↗
NASA NTRS1979

Gravitational influences on the liquid-state homogenization and solidification of aluminum antimonide

Typical commercial or laboratory-prepared samples of polycrystalline AlSb contain microstructural inhomogeneities of Al- or Sb-rich phases in addition to the primary AlSb grains. The paper reports on gravitational influences, such as density-driven convection or sedimentation, that cause microscopic phase separation and nonequilibrium conditions to exist in earth-based melts of AlSb. A triple-cavity electric furnace is used to homogenize the multiphase AlSb samples in space and on earth. A comparative characterization of identically processed low- and one-gravity samples of commercial AlSb reveals major improvements in the homogeneity of the low-gravity homogenized material.

Ang, C.-Y.↗
NASA NTRS1978

Effect of multiblade slurry saw induced damage on silicon solar cells

A correlation between the optimum etch loss and the depth of damage is established using wafers produced by the Multiblade Slurry (MBS) and the Internal Diameter (ID) saws. The observations are based on the measurement of the performance of solar cells fabricated on these wafers. Sample preparation and test results are described and the following conclusions are made: (1) the amount of silicon removal necessary for optimum solar cell performance coincides with the depth of saw-induced damage; (2) optimization of cell performance is not affected by the method of silicon removal; (3) sawing conditions should be optimized to minimize the extent of saw-induced damage; (4) the MBS saw is found to induce damage to a lesser extent; (5) since the extent of damage in MBS-sawn wafers is in the limit of etch loss required in texture etching, it is possible to achieve optimum improvement in cell performance by merely texture etching the surface of as-sawn wafers.

Daud, T.↗
NASA NTRS1979

Commercial use of materials processing in space

The paper examines the scientific and commercial aspects of Materials Processing in the Space program. The elimination of gravity driven convection in molten materials can preclude undesirable stirring and mixing during crystal growth, and improve the casting of alloys and composites, chemical reactions, and the separation of biological materials. The elimination of hydrostatic pressure will allow alloy heat-treatment without distortion and growth of heavy crystals, such as thorium oxide, and containerless processing of liquids and molten materials. On the other hand, more sophisticated process control and diagnostic methods in sample preparation and temperature control must be developed, concluding that space made products of commercial interest are likely to be low volume, high value items.

Zoller, L. K.↗
NASA NTRS1980

Permittivity and attenuation of wet snow between 4 and 12 GHz

The permittivity and attenuation of prepared samples of wet snow are measured and curves presented showing the dependence of these quantities of snow wetness and frequency. Equations are given that express the experimentally determined relation between attenuation per unit length and volume-percent wetness at any frequency between 4 and 12 GHz. Additional equations are given for the calculation of permittivity from the snow density, attenuation per unit length, and frequency. Water retention characteristics of snow are described. Some applications of the techniques, such as runoff forecasting from mountain snowpacks, are proposed.

Linlor, W. I.↗
NASA NTRS1983

Experimental design of an interlaboratory study for trace metal analysis of liquid fluids

The accurate determination of trace metals and fuels is an important requirement in much of the research into and development of alternative fuels for aerospace applications. Recognizing the detrimental effects of certain metals on fuel performance and fuel systems at the part per million and in some cases part per billion levels requires improved accuracy in determining these low concentration elements. Accurate analyses are also required to ensure interchangeability of analysis results between vendor, researcher, and end use for purposes of quality control. Previous interlaboratory studies have demonstrated the inability of different laboratories to agree on the results of metal analysis, particularly at low concentration levels, yet typically good precisions are reported within a laboratory. An interlaboratory study was designed to gain statistical information about the sources of variation in the reported concentrations. Five participant laboratories were used on a fee basis and were not informed of the purpose of the analyses. The effects of laboratory, analytical technique, concentration level, and ashing additive were studied in four fuel types for 20 elements of interest. The prescribed sample preparation schemes (variations of dry ashing) were used by all of the laboratories. The analytical data were statistically evaluated using a computer program for the analysis of variance technique.

Greenbauer-Seng, L. A.↗
NASA NTRS1983

Input generator for Denton 3-dimensional turbomachine-blade-row analysis code

A users manual is presented for a computer program that prepares the bulk of the input data set required for the Denton three dimensional turbomachine blade row analysis code. The Denton input is generated from a minimum of geometry and flow variable information by using cubic spline curve fitting procedures. The features of the program are discussed. The input is described and special instructions are included to assist in its preparation. Sample input and output are included.

Glassman, A. J.↗
NASA NTRS1985

Dielectric properties of 'diamondlike' carbon prepared by RF plasma deposition

Metal-carbon-metal structures were fabricated using either gold or aluminum evaporated electrodes and RF plasma (methane) deposited 'diamondlike' carbon films. Alternating-current conductance and capacitance versus voltage and frequency (10 Hz to 13 MHz) data were taken to determine the dielectric properties of these films. Conductance versus frequency data fit a generalized power law, consistent with both dc and hopping conduction components. The capacitance versus frequency data are well matched to the conductance versus frequency data, as predicted by a Kramers-Kronig analysis. The dielectric loss tangent is nearly constant at 0.5 to 1.0 percent over the frequency range from 1 to 100 kHz. The dc resistivity is above 10 to the 13th ohm cm, and the dc breakdown strength is above 8 x 10 to the 6th V/cm is properly prepared samples.

Lamb, J. D.↗
NASA NTRS1986

Space Station microgravity and materials processing facility A national laboratory dedicated to U.S. interests

The Microgravity and Materials Processing Facility (MMPF) of the Space Station is examined. The MMPF is designed to accommodate individual experiments and associated hardware and is to be housed in the Manufacturing and Technology Laboratory Module. The objectives of the microgravity and materials processing study and the user, experiment/equipment, MMPF system requirements, and programmatics and planning development tasks of the study are described. Consideration is given to the acceleration environment, on-orbit sample preparation and analysis, mission-time-line analyses, and payload complement trades. Diagrams of the MMPF are presented.

Atkins, H. L.↗