Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Systematic Matter and Binding-Energy Distributions from a Dispersive Optical Model Analysis

We present the first systematic dispersive-optical-model analysis of 16,18 O, 40,48 Ca, 58,64 Ni, 112,124 Sn, and 208 Pb. In all systems, roughly half the total nuclear binding energy is associated with the most-bound 10% of the total nucleon density. The extracted neutron skins reveal interplay of asymmetry, Coulomb, and shell effects on the skin thickness. Here, our results indicate that optical-model fits on isotopic pairs are effective for constraining nuclear structural quantities otherwise difficult to observe experimentally.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Resonant structure of 18 Na and the N = 8 shell

The resonant structure of the proton-unbound nucleus 18 Na has been studied via knockout reactions of a 20 Mg beam on a 9 Be target. Three resonant states in 18 Na are identified through the invariant-mass reconstruction of 17 Ne+1⁢𝑝 events, including the 1$^−_1$ ground state with one-proton decay energy of 1.38(2) MeV. In comparison with the low-lying states in the mirror neutron-rich nucleus 18 N, the 1$^−_1$ ground state and 2$^−_1$ excited state with 𝜋⁢(1⁢𝑑 5/2 ) 3 ⊗ 𝜈⁢1⁢𝑝 1/2 configurations in 18 Na likely correspond to different proton seniorities, 𝜈=3 and 1, respectively, while the 0$^−_1$ and 1$^−_2$ states with 𝜋⁢(1⁢𝑑 5/2 ) 2⁢ (2⁢𝑠 1/2 ) ⊗ 𝜈⁢1⁢𝑝 1/2 configuration show obvious Thomas-Ehrman shifts. With the more-precise atomic mass of 18 Na, the one-neutron separation energy 𝑆𝑛⁡( 19 Na)=20.31⁢(2)⁢MeV is derived. Based on the systematics of the differences in experimental one-neutron separation energy in the isotopic chains from 𝑍=9 to 12, the shell effects at 𝑁=8 for proton-rich nuclei are discussed.

energy levels↗

Deuteron-proton elastic scattering at intermediate energies

The deuteron-proton elastic scattering has been studied in the multiple-scattering expansion formalism. Primary attention has been given to such relativistic problems as a deuteron wave function in a moving frame and transformation of spin states due to Wigner rotation. Parametrization of the nucleon-nucleon t matrix has been used to take the off-energy-shell effects into account. The vector, A{sub y}, and tensor, A{sub yy}, analyzing powers of the deuteron have been calculated at two deuteron kinetic energies: 395 and 1200 MeV. The obtained results are compared with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron single-particle structure of molybdenum isotopes within the dispersive optical model

The evolution of neutron single-particle spectra in molybdenum isotopes was calculated on the basis of the dispersive optical model over the region extending from stable isotopes to the neutron drip line. The question of how the dependence of surface absorption on the neutron–proton asymmetry and the weakening of spin–orbit interaction affect the single-particle spectra in question is studied. The results agree with the concept according to which the shell effect becomes weaker near the neutron drip line.

74 ATOMIC AND MOLECULAR PHYSICS↗

Modeling multihole Ge spins in quantum dot systems

Beyond the title, this talk is about improving the computational modeling of germanium hole spins in lithographic quantum dots to work towards a better understanding of how potential qubit properties of these systems are affected by the effective shell filling of these holes in the electric potential.

Brickson, Mitchell Ian↗

Theoretical Description of the Fission Process

Advanced theoretical methods and high-performance computers may finally unlock the secrets of nuclear fission, a fundamental nuclear decay that is of great relevance to society. In this work, we studied the phenomenon of spontaneous fission using the symmetry-unrestricted nuclear density functional theory (DFT). Our results show that many observed properties of fissioning nuclei can be explained in terms of pathways in multidimensional collective space corresponding to different geometries of fission products. From the calculated collective potential and collective mass, we estimated spontaneous fission half-lives, and good agreement with experimental data was found. We also predicted a new phenomenon of trimodal spontaneous fission for some transfermium isotopes. Our calculations demonstrate that fission barriers of excited superheavy nuclei vary rapidly with particle number, pointing to the importance of shell effects even at large excitation energies. The results are consistent with recent experiments where superheavy elements were created by bombarding an actinide target with 48-calcium; yet even at high excitation energies, sizable fission barriers remained. Not only does this reveal clues about the conditions for creating new elements, it also provides a wider context for understanding other types of fission. Understanding of the fission process is crucial for many areas of science and technology. Fission governs existence of many transuranium elements, including the predicted long-lived superheavy species. In nuclear astrophysics, fission influences the formation of heavy elements on the final stages of the r-process in a very high neutron density environment. Fission applications are numerous. Improved understanding of the fission process will enable scientists to enhance the safety and reliability of the nation’s nuclear stockpile and nuclear reactors. The deployment of a fleet of safe and efficient advanced reactors, which will also minimize radiotoxic waste and be proliferation-resistant, is a goal for the advanced nuclear fuel cycles program. While in the past the design, construction, and operation of reactors were supported through empirical trials, this new phase in nuclear energy production is expected to heavily rely on advanced modeling and simulation capabilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fission Dynamics with Microscopic Level Densities

We present a consistent framework for treating the energy and angularmomentum dependence of the shape evolution in the nuclear fission. It combines microscopically calculated level densities with the Metropolis-walk method, has no new parameters, and can elucidate the energy-dependent influence of pairing and shell effects on the dynamics of warm nuclei.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SURFACE SYMMETRY ENERGY OF NUCLEAR ENERGY DENSITY FUNCTIONALS

We study the bulk deformation properties of the Skyrme nuclear energy density functionals. Following simple arguments based on the leptodermous expansion and liquid drop model, we apply the nuclear density functional theory to assess the role of the surface symmetry energy in nuclei. To this end, we validate the commonly used functional parametrizations against the data on excitation energies of superdeformed band-heads in Hg and Pb isotopes, and fission isomers in actinide nuclei. After subtracting shell effects, the results of our self-consistent calculations are consistent with macroscopic arguments and indicate that experimental data on strongly deformed configurations in neutron-rich nuclei are essential for optimizing future nuclear energy density functionals. The resulting survey provides a useful benchmark for further theoretical improvements. Unlike in nuclei close to the stability valley, whose macroscopic deformability hangs on the balance of surface and Coulomb terms, the deformability of neutron-rich nuclei strongly depends on the surface-symmetry energy; hence, its proper determination is crucial for the stability of deformed phases of the neutron-rich matter and description of fission rates for r-process nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ab-initio coupled-cluster effective interactions for the shell model: Application to neutron-rich oxygen and carbon isotopes

We derive and compute effective valence-space shell-model interactions from ab initio coupled-cluster theory and apply them to open-shell and neutron-rich oxygen and carbon isotopes. Our shell-model interactions are based on nucleon-nucleon and three-nucleon forces from chiral effective-field theory. We compute the energies of ground and low-lying states, and find good agreement with experiment. In particular, our computed 2 + states are consistent with N=14,16 shell closures in 22,24 O, and a weaker N=14 shell closure in 20 C. We find good agreement between our coupled-cluster effective-interaction results with those obtained from standard single-reference coupled-cluster calculations for up to eight valence neutrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bell-Plesset effects in Rayleigh-Taylor instability of finite-thickness spherical and cylindrical shells

Bell-Plesset (BP) effects account for the influence of global convergence or divergence of the fluid flow on the evolution of the interfacial perturbations embedded in the flow. The development of the Rayleigh-Taylor instability in radiation-driven spherical capsules and magnetically-driven cylindrical liners necessarily includes a significant contribution from BP effects due to the time dependence of the radius, velocity, and acceleration of the unstable surfaces or interfaces. An analytical model is presented that, for an ideal incompressible fluid and small perturbation amplitudes, exactly evaluates the BP effects in finite-thickness shells through acceleration and deceleration phases. The time-dependent dispersion equations determining the “instantaneous growth rate” are derived. It is demonstrated that by integrating this approximate growth rate over time, one can accurately evaluate the number of perturbation e-foldings during the inward acceleration phase of the implosion. As a result, in the limit of small shell thickness, exact thin-shell perturbationequations and approximate thin-shell dispersion equations are obtained, generalizing the earlier results [E. G. Harris, Phys. Fluids 5, 1057 (1962); E. Ott, Phys. Rev. Lett. 29, 1429 (1972); A. B. Bud'ko et al., Phys. Fluids B 2, 1159 (1990)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Stark effect in open shell complexes exhibiting partially quenched electronic angular momentum: Infrared laser Stark spectroscopy of OH–C 2 H 2 , OH–C 2 H 4 , and OH–H 2 O

The Stark effect is considered for polyatomic open shell complexes that exhibit partially quenched electronic angular momentum. Matrix elements of the Stark Hamiltonian represented in a parity conserving Hund's case (a) basis are derived for the most general case, in which the permanent dipole moment has projections on all three inertial axes of the system. Transition intensities are derived, again for the most general case, in which the laser polarization has projections onto axes parallel and perpendicular to the Stark electric field, and the transition dipole moment vector is projected onto all three inertial axes in the molecular frame. As a result, simulations derived from this model are compared to experimental rovibrational Stark spectra of OH-C 2 H 2 , OH-C 2 H 4 , and OH-H 2 O complexes formed in helium nanodroplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of MgO shell on electron transfer from Cu doped ZnInS quantum dots to FePt nanoparticles

Highlights: • MgO-coated FePt NPs were synthesized using 4 nm FePt cores as seeds for the growth of MgO shell. • Significant PL quenching took place in Cu doped ZnInS QD-FePt NP system owing to photoexcited electron transfer. • The formation of interfacial MgO barriers could efficiently restrain the electron transfer at QD-FePt interface. - Abstract: The effect of MgO shell on the electron transfer between luminescent Cu doped ZnInS quantum dots (QDs) and magnetic FePt/MgO core/shell nanoparticles (NPs) was studied by using steady-state and time-resolved photoluminescence (PL) spectroscopy. MgO-coated FePt NPs were synthesized using 4 nm FePt cores as seeds for the growth of MgO shell, having a reduced saturation magnetization Ms compared to the pure FePt NPs. It was found that the shortening in PL lifetime of Cu doped ZnInS QDs induced by FePt NPs demonstrated an electrons transfer process from excited QDs to the adjacent FePt NPs. When FePt NPs were coated with a MgO shell, the low work function of MgO shell resulted in a formation of higher interfacial barriers between Cu doped ZnInS QDs and FePt NPs, significantly suppressing the electron transfer at Cu doped ZnInS QD-FePt NP interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Can acceptable quality angel food cakes be made using pasteurized shell eggs? The effects of mixing factors on functional properties of angel food cakes

Due to recent Salmonella outbreaks, the pasteurized shell egg market is rapidly growing. One objection to using pasteurized eggs is the belief that they will produce unacceptable angel food cakes. Eggs were pasteurized using a hot water immersion process (56.7°C for 60 min) similar to that used by industry. Angel food cakes were made from the pasteurized egg white (PEW) as well as from raw egg white (REW) for comparison. Meringues were made using three mixer speed settings (low, medium, and high) and three durations for each speed. Functional qualities such as egg foaming were evaluated. Angel food cakes were compared in terms of cake volume, texture profile, and color values. When the optimal processing factors used for REW were applied to PEW, an inferior meringue was formed. However, by increasing the mixing time for PEW by 200% at the highest speed, an acceptable meringue was formed. The best angel food cake prepared from PEW had a volume only 6.8% less than that of the best cake prepared from REW. Texture profile analyses showed that the best angel food cake made from PEW was 13% firmer, 7.4% less springy, and 62% chewier than that from REW. Color analyses showed that PEW made a slightly darker colored cake crust than REW, although there were no significant differences in the crumb color. Modifying the mixing conditions for PEW resulted in angel food cakes with quality similar to that of cakes made with REW, thus overcoming an objection to using safer pasteurized shell eggs.

Food Science & Technology↗

Shell-structure and asymmetry effects in level densities

Level density [Formula: see text] is derived for a nuclear system with a given energy [Formula: see text], neutron [Formula: see text], and proton [Formula: see text] particle numbers, within the semiclassical extended Thomas–Fermi and periodic-orbit theory beyond the Fermi-gas saddle-point method. We obtain [Formula: see text], where [Formula: see text] is the modified Bessel function of the entropy [Formula: see text], and [Formula: see text] is related to the number of integrals of motion, except for the energy [Formula: see text]. For small shell structure contribution one obtains within the micro–macroscopic approximation (MMA) the value of [Formula: see text] for [Formula: see text]. In the opposite case of much larger shell structure contributions one finds a larger value of [Formula: see text]. The MMA level density [Formula: see text] reaches the well-known Fermi gas asymptote for large excitation energies, and the finite micro-canonical limit for low excitation energies. Fitting the MMA [Formula: see text] to experimental data on a long isotope chain for low excitation energies, due mainly to the shell effects, one obtains results for the inverse level density parameter [Formula: see text], which differs significantly from that of neutron resonances.

Physics↗

The effect of oxide shell thickness on the structural, electronic, and optical properties of Si-SiO{sub 2} core-shell nano-crystals: A (time dependent)density functional theory study

Due to their tunable properties, silicon nano-crystals (NC) are currently being investigated. Quantum confinement can generally be employed for size-dependent band-gap tuning at dimensions smaller than the Bohr radius (∼5 nm for silicon). At the nano-meter scale, however, increased surface-to-volume ratio makes the surface effects dominant. Specifically, in Si-SiO{sub 2} core-shell semiconductor NCs the interfacial transition layer causes peculiar electronic and optical properties, because of the co-existence of intermediate oxidation states of silicon (Si{sup n+}, n = 0–4). Due to the presence of the many factors involved, a comprehensive understanding of the optical properties of these NCs has not yet been achieved. In this work, Si-SiO{sub 2} NCs with a diameter of 1.1 nm and covered by amorphous oxide shells with thicknesses between 2.5 and 4.75 Å are comprehensively studied, employing density functional theory calculations. It is shown that with increased oxide shell thickness, the low-energy part of the optical transition spectrum of the NC is red shifted and attenuated. Moreover, the absorption coefficient is increased in the high-energy part of the spectrum which corresponds to SiO{sub 2} transitions. Structural examinations indicate a larger compressive stress on the central silicon cluster with a thicker oxide shell. Examination of the local density of states reveals the migration of frontier molecular orbitals from the oxide shell into the silicon core with the increase of silica shell thickness. The optical and electrical properties are explained through the analysis of the density of states and the spatial distribution of silicon sub-oxide species.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing X-ray Sensitivity via the Antenna Effect in Quantum Shells with Multiexciton Emission

Quantum shells (QSs) with efficient multiexciton emission can generate multiple excitons per particle under high-energy excitation, thereby improving exciton utilization under intense X-ray exposure and offering strong potential for X-ray-based scintillation applications. However, these QSs are typically composed of low-atomic-number (Z) elements, which substantially limits their X-ray absorption efficiency and leads to poor X-ray sensitivity. Here, we overcome this fundamental limitation by introducing a high-Z antenna-sensitization strategy that couples QSs to heavy-element molecular absorbers, which act as X-ray harvesting centers and funnel energy into the QSs via efficient interfacial transfer. By combining enhanced X-ray absorption with efficient interfacial energy transfer and improved exciton utilization, we achieve more than an order-of-magnitude increase in multiexciton-driven QS radioluminescence (RL) relative to pristine shells. Additionally, a high X-ray imaging resolution of 25.2 lp mm –1 was achieved, exceeding the performance of most previously reported X-ray imaging scintillators. These findings offer a promising design strategy for advancing QS-based materials toward high-performance X-ray imaging applications.

antenna effect↗

Nitride-Oxide-Metal Heterostructure with Self-Assembled Core–Shell Nanopillar Arrays: Effect of Ordering on Magneto-Optical Properties

Magneto-optical (MO) coupling incorporates photon-induced change of magnetic polarization that can be adopted in ultrafast switching, optical isolators, mode convertors, and optical data storage components for advanced optical integrated circuits. However, integrating plasmonic, magnetic, and dielectric properties in one single material system poses challenges since one natural material can hardly possess all these functionalities. Here, co-deposition of a three-phase heterostructure composed of a durable conductive nitride matrix with embedded core–shell vertically aligned nanopillars, is demonstrated. Additionally, the unique coupling between ferromagnetic NiO core and atomically sharp plasmonic Au shell enables strong MO activity out-of-plane at room temperature. Further, a template growth process is applied, which significantly enhances the ordering of the nanopillar array. The ordered nanostructure offers two schemes of spin polarization which result in stronger antisymmetry of Kerr rotation. The presented complex hybrid metamaterial platform with strong magnetic and optical anisotropies is promising for tunable and modulated all-optical-based nanodevices.

36 MATERIALS SCIENCE↗