Search NASA⌕ Search

SEARCH · Search NASA

Results for “Silicates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Iron metal production in silicate melts through the direct reduction of Fe/II/ by Ti/III/, Cr/II/, and Eu/II/

The production of metallic iron in silicate melts by chemical reactions of Ti(3+), Cr(2+), and Eu(2+) with Fe(2+) is demonstrated under experimental conditions in a simplified basaltic liquid. These reactions form a basis for interpreting the role of isochemical valency exchange models in explanations for the reduced nature of lunar basalts. The redox couples are individually investigated in the silicate melt to ascertain reference redox ratios that are independent of mutual interactions. These studies also provide calibrations of spectral absorptions of the Fe(2+) and Ti(2+) species in these glasses. Subsequent spectrophotometric analyses of Fe(2+) and Ti(2+) in glasses doped with both iron and titanium and of Fe(2+) in glasses doped with either iron and chromium or iron and europium ascertain the degree of mutual interactions in these dual-doped glasses.

Schreiber, H. D.↗
NASA NTRS1983

Viscous flow behavior of four iron-containing silicates with alumina, effects of composition and oxidation condition

The viscosity of a magma is an important parameter in connection with its effect on geologic processes such as melt segregation, magma vesiculation, and crystal fractionation. Though most models of geologic processes assume relatively low values for the magma viscosity less than 10,000 poise, it would be useful to have an empirical model for estimating viscosities when the process occurs during continuous cooling to a temperature region where the viscosity is expected to be very high. The considered work has been carried out to provide the experimental measurements of viscosity at low temperatures which would be used in formulating the empirical model. Ten iron-containing silicate compositions have been investigated by Klein et al. (1981), and four of these compositions have been selected for the present study with alumina. The study involves substitutions of Al2O3 for FeOx at Na2O/Al2O3 moles greater than one. For the four iron-containing silicate glasses with alumina, the viscosity at a given temperature is found to increase with increasing (Fe + Al).

Klein, L. C.↗
NASA NTRS1984

A search for the 10-micron silicate feature in periodic Comet Grigg-Skjellerup

A 10-micron spectrum of periodic Comet Grigg-Skjellerup was obtained on 22 June 1982 with the UCL array spectrometer at the United Kingdom Infrared Telescope, Mauna Kea. No emission feature is obvious in the spectrum. The observed spectrum can be fit equally well by a model of small hot absorbing grains or by a composite model with less than or equal to 30 percent (3sigma) warm, 'dirty' silicate grains. The latter model is consistent with the silicate abundance in Comet Kohoutek, which did display an emission feature at 10 microns.

Hanner, M.↗
NASA NTRS1985

Bocaiuva - A silicate-inclusion bearing iron meteorite related to the Eagle-Station pallasites

On the basis of its metal composition, the unique Bocaiuva meteorite, which consists of major metal having a high Ge/Ga ratio and minor silicates, appears distantly related to certain iron meteorites with similar Ge contents and similar Ge/Ga ratios. Detailed comparisons with six such irons shows, however, that none of these is closely related to Bocaiuva. The composition and texture of the Bocaiuva metal-silicate assembly indicate mixing in an impact event. It is suggested that the Eagle-Station pallasites were also formed by impact heating rather than by a long-lived internal heat source.

Malvin, D. J.↗
NASA NTRS1985

The infrared characteristics of circumstellar silicate grains

A theoretical study of the infrared emission from circumstellar shells around late-type giants is made, with the aim of deriving the infrared characteristics of the silicate grains condensing in these shells. A large grid of models has been compared with observations of optically visible Miras, IRC sources and OH/IR stars. From fitting the observed relation between the color temperature and the strength of the 10-micron feature, it is concluded that the ratio of the 3.5 to 10-micron absorption efficiencies of the dust is about 0.25, a factor of 2 less than a previous determination. Detailed modeling of the 2 to 13-micron spectrum of OH 26.5 + 0.6, IRC + 10011 and R Cas yielded a similar ratio. These detailed models also show that the shape of the 10-micron feature, particularly around 8 and 13 microns, varies from source to source. The derived 10-micron feature is narrower for larger dust column densities. These observed differences in the intrinsic shape of the 10-micron feature are not due to differences in size of the condensing particles. Probably they are related to structural or compositional differences in the condensing silicates.

Schutte, W.↗
NASA NTRS1986

Hydrous alteration of amorphous silicate smokes - First results

Results of the initial studies of the hydrous alteration of amorphous Mg-SiO smokes indicate that, although these materials readily adsorb water, the silicate structure is much more stable at 360 K than expected. Drastic changes in the relative absorption strengths of the 10- and 20-micron 'silicate' features that appear quite rapidly at 750 K were observed; these observations might have important implications for the interpretation of cometary dust spectra. Observations of the development of 3.4-3.5 micron features possibly due to hydrocarbons in the spectra of processed Mg-SiO smokes have raised the exciting possibility that these amorphous condensates could act as Fischer-Tropsch type catalysts to produce hydrocarbons in the primitive solar nebula.

Nuth, J. A.↗
NASA NTRS1986

Partitioning of K, U, and Th between sulfide and silicate liquids - Implications for radioactive heating of planetary cores

Experimental partitioning studies are reported of K, U, and Th between silicate and FeFeS liquids designed to test the proposal that actinide partitioning into sulfide liquids is more important then K partitioning in the radioactive heating of planetary cores. For a basaltic liquid at 1450 C and 1.5 GPa, U partitioning into FeFeS liquids is five times greater than K partitioning. A typical value for the liquid partition coefficient for U from a granitic silicate liquid at one atmosphere at 1150 C and low fO2 is about 0.02; the coefficient for Th is similar. At low fO2 and higher temperature, experiments with basaltic liquids produce strong Ca and U partitioning into the sulfide liquid with U coefficient greater than one. The Th coefficient is less strongly affected.

Murrell, M. T.↗
NASA NTRS1986

The shapes of the circumstellar silicate features

Around oxygen-rich stars the spectra of most long-period variables (LPV) show an excess infrared emission which is attributed to circumstellar silicate dust grains. It is known that the spectral energy distribution of the 10 micron emissions shows variations from star to star. With the availability of many Infrared Astronomy Satellite (IRAS) Low Resolution Spectra (LRS) in the 8 to 22 micron region, the 10 micron feature can be studied to determine its uniformity (or lack thereof). The excess silicate emissions (10 micron emission), divided into three groups characterized by similar spectral shapes, are discussed.

Little-Marenin, I. R.↗
NASA NTRS1987

Reflectance spectra of mafic silicates and phyllosilicates from .6 to 4.6 microns

The results of spectral measurements for mafic silicates are given. The study provided valuable spectral reflectance information about mafic silicates and phyllosilicates in the 2.5 to 4.6 micron wavelength region. It was shown that the reflectance of these materials is strongly affected by the presence of H2O and OH. Therefore, the identification of these absorbing species is greatly enhanced.

Roush, Ted L.↗
NASA NTRS1986

Electrically conductive, black thermal control coatings for spacecraft application. I - Silicate matrix formulation

The formulation of the graphite silicate paints MH-11 and MH-11Z, which will serve as electrically conductive, heat-resistant thermal control coatings for the Galileo spacecraft's 400 Newton engine plume shield, 10 Newton thruster plume shields, and external shunt radiators, is described, and performance results for these paints are reported. The MH-11 is produced by combining a certain grade of graphite powder with a silicate base to produce a black, inorganic, electrically conductive, room temperature cure thermal control paint having high temperature capability. Zinc oxide is added to the MH-11 formulation to produce the blister resistant painta MH-11Z. The mechanical, chemical, thermal, optical, and radiation characteristics of the coatings are reported. The formulation, mixing, application, and surface preparation of the substrates are described, and a method of determining the electrical resistance of the coatings is demonstrated.

Bauer, J. L.↗
NASA NTRS1987

The silicate component of Martian dust

Absorption features in telescopic reflectance spectra of Mars obtained during 1978, and absorption features in Mariner 7 and Mariner 9 spectra, are analyzed which are assigned to structural hydroxyl within a strongly hydrogen-bonded acidic material suggested to be a silicate. Deduced fundamentals indicate that the Si-O(b)-Si bond angle may be approximately linear, and that the estimated Si-O(b) bridge length may be about 1.61 A. Viking compositional data indicate that Mg(2+), rather than Ca(2+) may be the dominant cation in the Martian material. The results suggest that the silicate component of the dust may be an incipient hydrolysis product of olivine-rich ultramafic or mafic material, involving a process that resulted in minimum loss of mobile cations and that maintained the high O/Si ratio of the starting material.

Huguenin, R. L.↗
NASA NTRS1989

Effects of silicate-graphite dust in H II regions

Interstellar dust that is present in H II regions will most likely absorb H-ionizing photons more efficiently than He-ionizing photons. Assuming a silicate-graphite dust composition, the effects of such selective absorption on the ionization structure of H, He, O, and N are investigated with emphasis on a blister geometry. Scattering by the dust grains is included in the generalized on-the-spot approximation. For a relatively soft radiation field of effective temperature about 35,000 K, the radiation hardening may cause the He(+) zone to be nearly coextensive with the H(+) zone, and the O(++) volume is strongly increased relative to the N(++) volume. The smaller grains (radii about 0.005 micron) contribute most to the selective absorption. We show that because of a cancellation of effects a simple analytical formula for the fraction of ionizing photons absorbed by the dust given by Petrosian, Silk, and Field is quite accurate in the case of silicate-graphite dust, even for blister regions.

Aannestad, Per A.↗
NASA NTRS1988

Interactions of silicate glasses with aqueous environments under conditions of prolonged contact and flow

This paper discusses mechanisms involving saturation and reactions that lead to the formation of altered phases in silicate glasses considered for use in geologic repositories for nuclear waste. It is shown that the rate of dissolution of silicate glasses exposed to a broad range of contact times, leachant compositions, and surface-to-volume ratios is strongly affected by the presence of reactive species such as Al, Mg, and Fe. The reactive materials may originate in the leachant or, under conditions of high surface-to-volume ratio, in the glass itself. The effects of glass composition on the course of the corrosion process can be viewed in terms of the formation of a surface layer on the leached glass; the type, composition, and structure of this layer control the dissolution behavior of the glass.

Barkatt, Aaron↗
NASA NTRS1989

Proton irradiation of SiH4-Fe(CO)5-H2O ices - Production of refractory silicates and implications for the solar nebula

The results of a number of experiments are reported in which SiH4-Fe(CO)5-H2O ice mixtures were irradiated by 1 MeV protons at 15 K and then warmed to room temperature in approximately 50 K steps. The properties of a sample were monitored by observing its infrared absorption spectrum as a function of its processing history. In each experiment in which ice samples containing SiH4 were irradiated, a refractory amorphous silicate residue remained after warming to room temperature. In addition to the usual broad silicate features at 10 and 20 microns, features due to water or hydroxyl at 3 and 6.2 microns, and a feature due to CO at 5 microns, a surprisingly stable infrared feature at 4.6 microns, attributed to the SiH stretching fundamental, was observed.

Nuth, J. A.↗
NASA NTRS1989

Processes affecting the composition and structure of silicate grains in cometary nuclei

Characteristics which might be observed in silicate grains from a cometary nucleus are examined on the basis of theoretical studies of the life cycle of refractory grains and laboratory experiments using simple analogs to the complex natural system. The life-cycle of a typical silicate grain is reviewed from condensation in a circumstellar outflow to incorporation into a cometary parent body. The possibility for grain metamorphism in the cometary environment is discussed and results are presented from experiments on the properties of interstellar grains. Also, consideration is given to the information about presolar refractory grains that might be gained from studying samples returned from a cometary nucleus.

Nuth, Joseph A., III↗
NASA NTRS1990

Signatures of aging silicate dust

A self-consistent explanation for the width, strength, and position of spectral features which may be diagnostic of the structure and composition of circumstellar and interstellar silicate grains is presented based on a long series of laboratory experiments using simple oxide analogs. The ratio of the integrated absorption strength of the grains near 10 mu to that near 20 mu is shown to decrease monotonically with increased processing. This ratio may be diagnostic of the relative age of the silicate. The oxidation state of iron in the grains is directly related to both the near-IR grain opacity and enhanced absorption in the UV. The oxidation state of both iron and silicon is directly related to the rate of nucleation, growth, and processing in a circumstellar outflow, as well as to the processing history of the grain after it reaches the interstellar medium. Other diagnostic indicators of the average silicon oxidation state, degree of structural polymerization, and dispersion in the average degree of structural polymerization are discussed.

Nuth, Joseph A., III↗
NASA NTRS1990

Metal silicate mixtures - Spectral properties and applications to asteroid taxonomy

The reflectance spectra of combinations of olivine, orthopyroxene, and iron meteorite metal are experimentally studied, and the obtained variations in spectral properties are used to constrain the physical and chemical properties of the assemblages. The presence of metal most noticeably affects band area ratios, peak-to-peak and peak-to-minimum reflectance ratios, and band widths. Band width and band areas are useful for determining metal abundance in olivine and metal and orthopyroxene and metal assemblages, respectively. Mafic silicate grain size variations are best determined using band depth criteria. Band centers are most useful for determining mafic silicate composition. An application of these parameters to the S-class asteroid Flora is presented.

Cloutis, Edward A.↗
NASA NTRS1989

Type of silicate feature in oxygen rich stellar envelopes

In many astronomical studies, the emissivity function derived from the Trapezium emission feature has been used. A statistical study of a large sample of objects is described that deals with the applicability of this function (hereafter TR). For comparison, another emissivity function derived for lunar silicate (LS) sample 14321 was used which has a maximum at 10.2 microns instead of at 9.7 microns as for TR. The IRAS low resolution spectra sources classified as 7n was used which has a silicate absorption feature without any atomic line emission. Most of these sources are likely to be oxygen rich stellar envelopes or hotspots in molecular clouds. The central source as assumed to emit a Plankian spectrum characterized by a temperature (t) and an absorbing envelope with an emissivity dependence of type TR or LS. Values of t and tau, the absorption optical depth were obtained by minimizing chi(exp 2) between the observed and fitted spectra in the 7 to 13 micron range. Values of reduced chi(exp 2) were obtained by taking the noise listed in the LRS Catalog as standard deviation. The tau values obtained correspond to 9.7 microns for TR and 10.2 for LS.

Iyengar, K. V. K.↗