Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

In situ and ex situ studies of anomalous eutectic formation in undercooled Ni–Sn alloys

Anomalous eutectic formation in undercooled Ni-Sn alloys was investigated by in situ X-ray diffraction and ex situ remelting and annealing experiments. Dynamic recrystallization and partial remelting of primary solids followed by repeated nucleation and growth of eutectic grains in the mushy zone were revealed by time-resolved X-ray diffraction. Ex situ experiments demonstrated that partial remelting of near-equilibrium solidified alloys of eutectic or near-eutectic composition can convert regular lamellar eutectic into anomalous eutectic, whereas high-temperature annealing of splat-quenched alloys of similar composition can convert eutectic or two-phase dendrites into anomalous eutectic. It is concluded that compared to ripening in solid-states, partial remelting of eutectic or two-phase dendrites in a mushy zone provides a more realistic mechanism for anomalous eutectic formation in undercooled solidification of Ni-Sn eutectic alloys. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crystal growth↗

A Comparative Study on the Effect of Zr, Sn, and Ti on the Crystallization Behavior of Nepheline Glass

In alkali aluminosilicate glasses, additions of 4+ cations like Zr and Ti are often added to promote crystallization. In this study, Zr, Ti, or Sn are progressively substituted for Si in nepheline (NaAlSiO4) glass to determine their impact on the crystallization behavior. For glasses homogeneous on quenching, up to NaAlZr0.075Si0.925O4, NaAlSn0.100Si0.900O4, and NaAlTi0.300Si0.700O4, respectively, crystallization temperatures were investigated by thermal analysis. A subset of compositions was subjected to additional thermal analysis, varying heating rate and particle size, to investigate the subtleties of crystallization behavior. Subsequent heat treatment of glass powders was performed to maximize crystallization, and glass-ceramic microstructure was assessed by optical microscopy and electron microprobe, while crystalline phases were determined by X-ray diffraction. In all cases the major crystalline phase was orthorhombic carnegieite, which accommodated Ti in its structure but not Zr or Sn, and excess 4+ cations formed MO2, i.e., brookite, baddeleyite, and cassiterite, respectively.

Nienhuis-Marcial, Emily T.↗

SEM characterization of two advanced fuel alloys: U-10Zr-4.3Sn and U-10Zr-4.3Sn-4.7Ln

Tin is being investigated as a potential additive to metallic fuel to control fuel-cladding chemical interaction (FCCI). A primary cause of FCCI is the lanthanide fission products moving to the fuel periphery and interacting with the cladding. This interaction will lead to wastage of the cladding and eventually to a cladding breach. The current paper is a scanning electron microscopy (SEM) characterization of as-cast and annealed U-10Zr-4.3Sn and U-10Zr-4.3Sn-4.7Ln, where Ln = 53Nd-25Ce-16Pr-6La. Finally, the present study shows that tin preferentially binds the lanthanides, which will prevent lanthanide migration and interaction with the cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A study of microstructure of Fe-Cu-Ni-Sn and Fe-Cu-Ni-Sn-VN metal matrix for diamond containing composites

Highlights: • A nanocrystalline sample of coarse-grained powders of iron, copper, nickel, tin was obtained. • The structure of the sample consists of a supersaturated solid solution of nitrogen and vanadium in α-Fe. • Grain refinement occurs as a result of the decomposition of supersaturated solid solution of nitrogen and vanadium in α-Fe. To obtain bulk of 51Fe–32Cu–9Ni–8Sn and 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN nanocomposites, a pressing method at room temperature and subsequent hot pressing in a vacuum was used. The microstructure of the sintered composites by X-ray diffraction and transmission electron microscopy was investigated. It is shown that in the 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN composite there was a dissolution of vanadium nitride in γ‑iron and formation of a supersaturated solid solution of nitrogen and vanadium in the α‑iron. As a result, there was a substantial grinding of ferrite grains (from 5 to 50 μm to 20–400 nm) as compared to a sample without vanadium nitride (from 5 to 50 μm to 400–800 nm). Nanocomposites are considered as promising materials to create a new generation of diamond containing composites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multifunctional Pd-Sn electrocatalysts enabled by in situ formed SnOx and TiC triple junctions

This paper describes an in situ formed, triple junction structured PdSn electrocatalyst dispersed on a stable conductive TiC surface. Through extensive characterization and computational modeling, we show that the multicomponent catalyst forms a unique PdSn/SnOx/TiC triple junction structure. This structure stabilizes Pd and promotes its catalytic performance toward a model reaction, formic acid oxidation. Computational modeling suggests that the triple junction structure is the most stable configuration that provides desired anchoring sites for Pd and enables a favorable synergy between the multicomponents Pd, Sn, SnOx, and TiC for high activity. The triple junction structure also can provide better stability against catalysts migration, detachment, or sintering. Experimental measurements also confirm that multicomponent catalysts provide synergistic functions. The intermediate products, COads, prefer to adsorb onto the Pd sites, while the OH prefers the Sn and SnOx sites, which function together to prevent catalyst poisoning.

Dong, Qizhi↗

Metal–Metal Bonding Influences Hydride Reactivity in [Sn–Rh] 3+ and [Sn–Ni] 2+ Bimetallics

Heavier group 14 metal hydrides serve as key intermediates in catalytic transformations, such as hydroboration. Regenerating such intermediates via a clean hydride source like dihydrogen could provide catalytic processes with a more economical alternative to, e.g., silanes and hydridoborane reagents. Herein, we report our efforts toward this goal using a [Sn–Rh] 3+ bimetallic system with the formal Rh I center acting as a potential dihydrogen activator. Targeting the introduction of a hydride ligand to the bimetallic core, our reactivity studies have revealed a preference for the hydride ligand to be bound to the Rh center, instead of the Sn center. Finally, examination of the electronic structures of these complexes via theoretical and experimental methods has revealed the electron acceptor nature of the Rh center within the bimetallic core and offers an explanation for the localization of the hydride between metal centers.

anions↗

ZTF SN Ia DR2: Improved SN Ia colors through expanded dimensionality with SALT3+

Context. Type Ia supernovae (SNe Ia) are a key probe in modern cosmology, as they can be used to measure luminosity distances at gigaparsec scales. Models of their light curves are used to project heterogeneous observed data onto a common basis for analysis. Aims. The SALT model currently used for SN Ia cosmology describes SNe as having two sources of variability, accounted for by a color parameter c , and a “stretch” parameter x 1 . We extend the model to include an additional parameter we label x 2 , to investigate the cosmological impact of currently unaddressed light-curve variability. Methods. We constructed a new SALT model, that we dub “SALT3+”. This model was trained by an improved version of the SALTshaker code, using training data combining a selection of the second data release of cosmological SNe Ia from the Zwicky Transient Facility and the existing SALT3 training compilation. Results. We find additional, coherent variability in supernova light curves beyond SALT3. Most of this variation can be described as phase-dependent variation in g − r and r − i color curves, correlated with a boost in the height of the secondary maximum in i -band. These behaviors correlate with spectral differences, particularly in line velocity. We find that fits with the existing SALT3 model tend to address this excess variation with the color parameter, leading to less informative measurements of supernova color. We find that neglecting the new parameter in light-curve fits leads to a trend in Hubble residuals with x 2 of 0.039 ± 0.005 mag, representing a potential systematic uncertainty. However, we find no evidence of a bias in current cosmological measurements. Conclusions. We conclude that extended SN Ia light-curve models promise mild improvement in the accuracy of color measurements, and corresponding cosmological precision. However, models with more parameters are unlikely to substantially affect current cosmological results.

Kenworthy, W. D. (ORCID:0000000251535983)↗

{sup 57}Fe and {sup 119}Sn Moessbauer Effect Study of Fe-Sn-B Amorphous Alloys

Ribbons of Fe{sub 100-x}Sn{sub 5}B{sub x} (x = 15, 17, 20) metallic glass are studied using {sup 57}Fe and {sup 119}Sn Moessbauer spectrometry. The obtained Moessbauer spectra are evaluated by distributions of hyperfine magnetic fields in addition to crystalline components. The as-quenched alloys are XRD amorphous for x =15 and 17 whereas for x =20, traces of quenched-in crystallites are revealed. Progress of crystallization is followed on samples annealed for 30 min at temperatures that cover the first crystallization peak. The evolution of crystalline fraction as well as average values of hyperfine magnetic fields and isomer shifts are discussed as a function of the alloy composition and temperature of annealing.

36 MATERIALS SCIENCE↗

Application of machine learning in the determination of impact parameter in the 132 Sn+ 124 Sn system

Here, 132 Sn + 124 Sn collisions at a beam energy of 270 MeV/nucleon were performed at the Radioactive Isotope Beam Factory (RIBF) in RIKEN to investigate the nuclear equation of state. Reconstructing the impact parameter is one of the important tasks in the experiment as it relates to many observable. In this work, we employ three commonly used algorithms in machine learning, the artificial neural network (ANN), the convolutional neural network (CNN), and the light gradient boosting machine (LightGBM), to determine the impact parameter by analyzing either the charged particle spectra or several features simulated with events from the ultrarelativistic quantum molecular dynamics (UrQMD) model. To closely imitate experimental data and investigate the generalizability of the trained machine learning algorithms, incompressibility of nuclear equation of state and the in-medium nucleon-nucleon cross sections are varied in the UrQMD model to generate the training data. The mean absolute error Δb between the true and the predicted impact parameter is smaller than 0.45 fm if training and testing sets are sampled from the UrQMD model with the same parameter set. However, if training and testing sets are sampled with different parameter sets, Δb would increase to 0.8 fm. The generalizability of the trained machine learning algorithms suggests that these machine learning algorithms can be used reliably to reconstruct the impact parameter in experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of the ferroelectric visible light absorbing semiconductors: Sn 2 P 2 S 6 and Sn 2 P 2 Se 6

Ferroelectrics with suitable band gaps have recently attracted attention as candidate solar absorbing materials for photovoltaics. The inversion symmetry breaking may promote the separation of photoexcited carriers and allow voltages higher than the band gap. However, these effects are not fully understood, in part because of a lack of suitable model systems for studying these effects in detail. Here, we report properties of ferroelectric Sn 2 P 2 S 6 and Sn 2 P 2 Se 6 using first principles calculations. Results are given for the electronic structure, carrier pocket shapes, optical absorption, and transport.We find indirect band gaps of 2.20 eV and 1.55 eV, respectively, and favorable band structures for carrier transport, including both holes and electrons. Strong absorption is found above the direct gaps of 2.43 eV and 1.76 eV. Furthermore these compounds may serve as useful model systems for understanding photovoltaic effects in ferroelectric semiconductors.

36 MATERIALS SCIENCE↗

Hyperfine magnetic fields at the nuclei of probe {sup 119}Sn atoms and exchange interactions in the CaCu{sub 3}Mn{sub 3.96}Sn{sub 0.04}O{sub 12} manganite

We have investigated the hyperfine magnetic interactions between the nuclei of probe {sup 119}Sn atoms in the CaCu{sub 3}Mn{sub 3.96}Sn{sub 0.04}O{sub 12} double manganite by Moessbauer spectroscopy using magnetic measurements. A consistent description of the results obtained in terms of the Weiss molecular field model by taking into account the peculiarities of the local environment of tin atoms has allowed the indirect Cu{sup 2+}-O-Mn{sup 4+} (J{sub CuMn} Almost-Equal-To -51 {+-} 1 K) and Mn{sup 4+}-O-Mn{sup 4+} (J{sub MnMn} Almost-Equal-To -0.6 {+-} 0.6 K) exchange interaction integrals to be estimated. Based on the Kanamori-Goodenough-Anderson model, we show that the magnitude and sign of the intrasublattice exchange integral J{sub MnMn} correspond to both the electronic configuration of the Mn{sup 4+} cations and the geometry of their local crystallographic environment in the compound under study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing Solid Electrolyte Interphase on Sn Anode in Lithium Ion Battery

Tin (Sn) nanoparticle electrodes have been prepared and battery cycling performance has been investigated with 1.2 M LiPF6 in ethylene carbonate (EC) / diethyl carbonate (DEC) electrolyte (1:1, w/w) with and without added vinylene carbonate (VC) or fluoroethylene carbonate (FEC). Incorporation of either VC or FEC improves the capacity retention of Sn nanoparticle electrodes although incorporation of VC also results in a significant increase in cell impedance. The best electrochemical performance was observed with electrolyte containing 10% of added FEC. In order to develop a better understanding of the role of the electrolyte in capacity retention and solid electrolyte interface (SEI) structure, ex-situ surface analysis has been performed on cycled electrodes with infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Hard XPS (HAXPES). The ex-situ analysis reveals a correlation between electrochemical performance, electrolyte composition, and SEI structure.

25 ENERGY STORAGE↗

Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH4Cl-H2O

The formation of segregation channels during the unidirectional solidification of base chilled ingots has been studied as a function of composition in binary Pb-Sn and Pb-Sb and ternary Pb-Sn-Sb alloys. The patterns of channel distribution were characterized in the binary and ternary systems and are described as functions of temperature gradients, growth rates, dendrite spacings, and interdendritic permeabilities. Channels appear to nucleate at random across a dendritic front and subsequently to interact as they propagate, decreasing in density across the front. Assuming that the interdendritic spacing is the characteristic distance for a liquid perturbation, yields critical effective Rayleigh numbers which lie within a factor of x 40 for both metallic and aqueous systems. This correlation is close, considering the sensitivity to any assumed dimension and the range of material properties involved, and is taken to support a model for channel nucleation occurring close to the dendritic growth front.

Hellawell, A.↗