Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sockets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Characteristics and Energy Use of Volume Servers in the United States

Servers’ field energy use remains poorly understood, given heterogeneous computing loads, configurable hardware and software, and operation over a wide range of management practices. This paper explores various characteristics of 1- and 2-socket volume servers that affect energy consumption, and quantifies the difference in power demand between higher-performing SPEC and ENERGY STAR servers and our best understanding of a typical server operating today. We first establish general characteristics of the U.S. installed base of volume servers from existing IDC data and the literature, before presenting information on server hardware configurations from data collection events at a major online retail website. We then compare cumulative distribution functions of server idle power across three separate datasets and explain the differences between them via examination of the hardware characteristics to which power draw is most sensitive. We find that idle server power demand is significantly higher than ENERGY STAR benchmarks and the industry-released energy use documented in SPEC, and that SPEC server configurations—and likely the associated power-scaling trends—are atypical of volume servers. Next, we examine recent trends in server power draw among high-performing servers across their full load range to consider how representative these trends are of all volume servers before inputting weighted average idle power load values into a recently published model of national server energy use. Finally, we present results from two surveys of IT managers (n=216) and IT vendors (n=178) that illustrate the prevalence of more-efficient equipment and operational practices in server rooms and closets; these findings highlight opportunities to improve the energy efficiency of the U.S. server stock.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Conceptual Design for Replaceable Paddle for the Saltstone Production Facility (SPF) Mixer

The primary objective of this task was to provide a recommendation for a replaceable paddle that could be incorporated into the Saltstone Production Facility (SPF) process. The replaceable paddle concept was proposed given the time it took to replace the existing paddle designs was approximately a week of downtime. Two different types of replaceable paddles were considered, a split paddle and a replaceable tip paddle. The split paddle design was developed; however, a review of the drawings by maintenance personnel determined that changeout of the new design would take about the same time/effort as replacing the existing paddles. Five different replaceable tip designs were considered: side attachment, V neck, straight notch, angled notch, and dovetail. The recommended replaceable tip design was the angled notch, which includes a central hub with two angled notches, where the replaceable tips are secured to the hub using two ½” – 13 Unified National Coarse Threads (UNC) socket head cap screws (SHCS). Design drawing for both the flat and helical paddle blades are complete and are included in Appendix A. A structural calculation (M-CLC-Z-00137) was performed on this design which determined the design is structurally adequate for normal or extreme loads that would be encountered in the SPF READCOTM mixer. This calculation is included in Appendix C. Based on the calculation, mechanical failure will not limit the life of the tip or tip attachment. The quantity of erosion will be the primary driver dictating tip replacement schedules.

42 ENGINEERING↗
DOE OSTI2019

Parallel Computing for Massive Dynamic Contingency Analysis

The first step towards running PSLF in a high-performance computing (HPC) environment was porting PSLF to the Linux operating system from the current shipping target of MS Windows. The target machine was the LLNL Quartz system which is a Linux cluster configured for large parallel jobs. It has 2,688 batch nodes with Dual Socket Intel E5-2695 v4 (Broadwell) CPUs with 18 cores each, with a total of 344,064 GB of memory, each node having 128 GB of memory. Nodes are connected with an Intel Omni-Path 100 GB/s interconnect. Quartz runs the Tri-Laboratory Operating System Software (TOSS) that includes Red Hat Enterprise Linux (RHEL) distribution used on the LLNL HPC machines.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Ibis Networks/WattIQ (IN2 Final Report)

Ibis Networks is a full-stack cleantech company that provides plug-level energy monitoring and control to solve energy and asset management problems for the enterprise. During DATES – DATES, an NREL research team worked with the Ibis team to validate their product, the InteliSocket. The Ibis InteliSocket is a pass-through plug-load energy monitor and controller that is designed to reduce energy wasted by common 120 V plug-in devices in commercial office buildings, such as computer peripherals, conference room AV equipment, and break-room appliances. The system can shut off supply power to these end uses via remote control, manual switches, pre-set schedules, or automated control algorithms. The scope of this IN2 project was the development and refinement of “smart” learning behavior algorithms (LBAs), which could help installation processes and dramatically expand the sockets’ capabilities and energy-saving potential by suggesting suitable control schedules that are based on monitored use patterns. While Ibis has the analytical and software expertise for algorithm development, the lack of test data, both in a controlled laboratory setting and in real-life deployment scenarios, represented a key barrier toward commercialization of the product. Assistance through the IN2 program provided an opportunity to conduct the needed “trial and error” algorithm development. The project included baseline field-data collection, laboratory testing, and field validation components, all of which were conducted at the NREL campus between April 2017 and July 2019.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

A Block-Based Triangle Counting Algorithm on Heterogeneous Environments

Triangle counting is a fundamental building block in graph algorithms. In this paper, we propose a block-based triangle counting algorithm to reduce data movement during both sequential and parallel execution. Our block-based formulation makes the algorithm naturally suitable for heterogeneous architectures. The problem of partitioning the adjacency matrix of a graph is well-studied. Our task decomposition goes one step further: it partitions the set of triangles in the graph. By streaming these small tasks to compute resources, we can solve problems that do not fit on a device. We demonstrate the effectiveness of our approach by providing an implementation on a compute node with multiple sockets, cores and GPUs. The current state-of-the-art in triangle enumeration processes the Friendster graph in 2.1 seconds, not including data copy time between CPU and GPU. Using that metric, our approach is 20 percent faster. When copy times are included, our algorithm takes 3.2 seconds. This is 5.6 times faster than the fastest published CPU-only time.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Power Restoration Design - Building 1010 & 1010A

Power distribution upgrades that include: A new PMH-5, 12KV/208, Delta/WYE transformer. 600A Main Switchboard (MSB) with 600A LSI Main CB and push button capability. New feeders from transformer to MSB. New panels with NEMA 1 enclosures, door-in-door, with 4" gutter space on each side, New NEMA 4X CT Cabinet and meter socket. New 300A & 150A LSI circuit breakers, Trenching for grounding and an allowance of $12,000 for grounding system provided by SNL electrical Operations Engineer.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

A Low Cost SIPM Evaluation and Control Prototyping System including accurate bias voltage generation, leakage current measurement, and temperature control using Peltier cooling

We describe an electronics system to operate SIPMs in the laboratory. The system is comprised of a single channel amplifier board (SIPM Amp) and a 4-channel control board to which up to 4 SIPM Amp boards can be connected. The control board supplies a common low voltage power for the amplifiers. All channels feature individually regulated bias and Peltier power voltages, along withPt10K RTD readout. A graphical user interface allows control of the bias voltages, amplifier voltage, Peltier voltages, and also provides for readback of leakage currents and other voltages. The GUI app has a feedback loop to measure the SIPM temperature (with the PT10K) and generate correction voltages to the Peltier to regulate the temperature. The temperatures, which can be achieved by Peltier cooling depend on the thermal design of the setup, the practical limit being about 50C below ambient. The SIPM Amp. board is a small (3x5cm) PCB that has a single SIPM readout channel. The SIPM scan be surface mounted on the pcb or connected to a 2-pin 0.100" socket. The area around the SIPM footprint is thermally isolated by perforations in the PCB. The RTD is located inside the thermal break. Onboard is BV and LV filtering. The 10X amplifier is based on MiniCircuits' GALI-S66+ integrated circuit, tweaked for a 6V power. The amplifier was selected for a combination of high bandwidth, low noise, and low power. An accoupled amplifier output is connected to an SMA connector. For best operation of this inverting amplifier the output signal should be in the range of 0 to -1V.The Amplifier board is connected to the Control board with a 10-conductor 0.025" pitch ribbon cable, carrying all the services. Peltier power for currents more than 1A should use a separate 2-contact connector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Protecting Websites from Cross-Site Scripting (XSS) Attacks: A Novel Configuration using Pulse Secure © Pulse Connect Secure © and Virtual Web Application Firewall (vWAF)

Cross-site scripting (XSS), one of the most prevalent forms of client-side attacks, is when bad actors attempt to access sensitive information from the backend web server and other systems on the backend network. Some XSS attacks attempt to access client-side sensitive information, such as cookies. Web application firewalls (WAFs) are a first line of defense where common Uniform Resource Locator (URL) patterns are analyzed to detect and block known attacks. This paper describes a novel configuration using the Pulse Secure © Pulse Connect Secure © (PCS © ) Secure Socket Layer Virtual Private Network software and Virtual Web Application Firewall (vWAF) that protects a website from XSS attacks. This paper also presents novel aspects of the configuration that control the redirection of traffic through the vWAF and provide fine-grained behavioral control at the application level while decoupling the PCS and vWAF configurations. The intended audience for this paper comprises system and site administrators who are familiar with standard web server environments. These configuration details might prove useful during the design of a more secure infrastructure.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Using Splunk® Enterprise Search Commands for Advanced Analysis of Ivanti Connect Secure© Logs

Analyzing the logs of even the smallest Information Technology (IT) system can be a challenge considering they can generate millions of lines of log data in a very short time. Splunk® Enterprise is an industry leading tool that allows analysis of log data, which can enhance troubleshooting capabilities, improve system performance, and improve the security posture of an IT system. Ivanti Connect Secure© (ICS) is a market-leading platform powered by the Ivanti Secure Socket Layer Virtual Private Network (SSL VPN) appliance, providing an architecture for secure access to and protection of network resources. This paper describes an approach for using Splunk Enterprise search capabilities to perform advanced data analysis of ICS logs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Providing Thermal Stability for an Exascale Supercomputer: A Case Study of Frontier's Cooling System

High performance computing (HPC) systems frequently produce large dynamic power swings, even under typical operating conditions, that can present a significant challenge for their direct-liquid cooling systems. Further, the primary cooling loops that must remove this waste heat have response times measured in minutes while the underlying HPC component thermal stress is measured in seconds. The per-socket power demand for both compute processing units (CPUs) and graphic processing units ( GPUs) continues to increase with each successive generation while case temperatures are declining. New HPC systems are expected to exacerbate the challenge of these dynamic power swings and the impact on effective and timely cooling systems. This paper describes the cooling and controls system for Oak Ridge National Laboratory’s Frontier Supercomputer, the first sustained exascale system, as a case study for this situation. The cooling and control system for Frontier demonstrates specific success, but with a number of trade-offs and decisions that suggest further design and operating optimizations for the community at large to consider.

42 ENGINEERING↗
DOE OSTI2025

Remote Instrumentation and Data Acquisition

This poster outlines the development and implementation of a remote data acquisition system for waveform analysis using a Rohde & Schwarz oscilloscope. The project involved capturing waveform data, and transferring it to a local machine for visualization and analysis. The core logic was developed in C++ with a focus on object oriented programming and the use of polymorphism so the main application can interact with any instrument without knowing its exact type, simplifying the overall logic and making it easier to add or swap out components without changing the rest of the codebase.. The system issues Standard Commands for Programmable Instruments (SCPI) via a socket connection and parses the oscilloscope s ASCII waveform data. The C++ application was containerized using Docker for ease of portability, and reproducibility. Emphasis was placed on secure networking practices, error handling, and effective data capture. The report describes the technical steps taken, challenges encountered, and future work, providing insight into the practical integration of hardware interfacing with remote computational environments.

Parikh, Jaymil [Illinois U., Urbana]↗
DOE OSTI2026

A Modular Accelerator Robotics Framework for AD Robotics

Accelerator tunnels, such as the ones at Fermilab, remain highly radioactive after beam shutoff due to induced radiation from the beam. This residual radiation creates a hazardous environment for manual inspection and repair of beamline components. To minimize worker radiation dose and reduce beam downtime, the AD Robotics Initiative previously built a fleet of low-cost custom mobile robots. However, the custom Python sockets server-client architecture lacked standardization, causing development delays and complicating the integration of new sensors and actuators. Here, we developed a modular system using ROS2 and Docker to standardize the teleoperation and control interfaces. This system was validated by implementing a teleoperation controller with real-time, low-latency, and high-definition video feedback. The aim of this framework is for a new feature or even a robot to be integrated into the system simply by documenting the hardware configuration. Current integration of LiDAR, Odometry, and Depth Cameras provides the foundation for Simultaneous Localization and Mapping (SLAM) tasks. Finally, future work involves integration into the accelerator control system and the attachment of a 6 degree-of-freedom robotic arm for telemanipulation.

Rayyan Khan, M. [Fermilab; Rensselaer Poly.; Unlis↗
DOE OSTI2018

Quasi-Determinate Model of Thermal Phenomena in Drilling Laminates

Assessment of thermal phenomena in the drilling of laminates is critical in printed-circuit production. A quasi-determinate model permits calculation of the expected temperature in the cutting zone during the drilling of small mounting sockets and pass-through holes, with consequent decrease in manufacturing waste.

42 ENGINEERING↗
NASA NTRS1966

Modified power tool rapidly drives series torque bolts

Feeder attachment, which fits on a standard power driver, drives a series of longitudinally attached torque bolts into place with great speed. It allows loading of a series of bolts and then positions individual bolts in the driving head for assembly. The attachment contains a socket gun which may be modified to accommodate different types and sizes of bolts.

Source record↗
NASA NTRS1966

Polarizing keys prevent mismatch of connector plugs and receptacles

Keying prevents mismatching of plugs and receptacles in connector patching of instrumentation involving several thousand leads. Each receptacle and plug contains three polarizing keys that must mate in a complementary mode before the connector pins and sockets will engage.

Chiapuzio, A.↗
NASA NTRS1966

Quick attach and release fluid coupling assembly is self-aligning, self-sealing

Fluid coupling assembly that is self-aligning, self-sealing and contains a bellow ball and socket coupling for quick attach and release is highly reliable and can handle cryogenic fluids where icing is encountered. The fluid coupling assembly is used in many fluid systems but is particularly applicable to cryogenic systems.

Herold, C. P.↗