Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solid state device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interface diagnostics platform for thin-film solid-state batteries

Understanding the impedances of battery materials and their interfaces remains a major challenge, usually addressed by electrochemical impedance spectroscopy (EIS) where frequency-dependent complex impedance of full battery cells is measured and then modeled by a network of connected electrical elements. As conventionally applied, this approach produces ambiguity in that (1) multiple different network configurations may fit the data convincingly and (2) the method offers no direct association of the electrical elements with physical features of the battery. Here we present a new methodology that resolves both sources of ambiguity, enabled by expanding the experimental scope to directly inform the configuration of elements and their parameters in the network model. We demonstrate this methodology using thin film fabrication of solid state battery devices patterned by shadow masked sputter deposition, so that diagnostic devices corresponding to individual interface and material components can be fabricated simultaneously with full cell batteries. EIS models for the diagnostic devices can then be connected to form full cell networks whose topology matches the well-known physical configuration of the battery. When connected in this way, the full network model – made from connecting the diagnostic device EIS models – fits the full cell EIS data. For the case of a thin film solid state battery composed of amorphous silicon anode, lithium phosphorus oxynitride (LiPON) solid electrolyte, and lithium vanadium oxide (Li x V 2 O 5 ) cathode, we show that the approach allows us to identify ionic impedance/conductivity of the cathode/electrolyte as a limiting impedance and the anode/electrolyte interface cycling instability as a primary degradation factor.

25 ENERGY STORAGE↗
NASA NTRS1980

Solid state SPS microwave generation and transmission study. Volume 2, phase 2: Appendices

The solid state sandwich concept for SPS was further defined. The design effort concentrated on the spacetenna, but did include some system analysis for parametric comparison reasons. Basic solid state microwave devices were defined and modeled. An initial conceptual subsystems and system design was performed as well as sidelobe control and system selection. The selected system concept and parametric solid state microwave power transmission system data were assessed relevant to the SPS concept. Although device efficiency was not a goal, the sensitivities to design of this efficiency were parametrically treated. Sidelobe control consisted of various single step tapers, multistep tapers and Gaussian tapers. A hybrid concept using tubes and solid state was evaluated. Thermal analyses are included with emphasis on sensitivities to waste heat radiator form factor, emissivity, absorptivity, amplifier efficiency, material and junction temperature.

Maynard, O. E.↗
NASA NTRS2014

Rapid Polymer Sequencer

Solid-state nanopore-based analysis of nucleic acid polymers is revolutionary. No other technique can determine information content in single molecules of genetic material at the speed of 1 subunit per microsecond. Because individual molecules are counted, the output is intrinsically quantitative. The nanopore approach is more generalized than any other method and in principle may be used to analyze any polymer molecule, including proteins. The approach to the development of a solid-state nanopore device is novel in the use of nanofabrication, nanoelectronic components, and high-speed signal acquisition. A novel geometry of the solid-state nanopore (less than 5 nm in length and 5 nm in diameter) will enable 1 to 5 nucleotide resolution measurements. This means that maximum resolution will be improved at least 100-fold compared to biological ion-channel measurements. The solid-state nanopore sensor will be made to enable sequencing DNA at a much faster rate than presently possible without the need for extensive sample preparation procedures, such as enzymatic amplification and labeling reactions. It will analyze electronic properties of individual subunits of DNA or RNA, to obtain linear composition of each genetic polymer molecule.

technology opportunity↗
NASA NTRS1979

Autonomous attitude determination systems

A summary of autonomous attitude determination systems is presented by separating it into four areas: types of attitude determination systems which can be automated, a description of the attitude determination problem and its solution, specific types of sensors, and the processor requirements of two automated systems. The sensors used in attitude determination have been characteristically carried on-board the spacecraft in the past, so the major development requirement of automated systems is in the area of on-board processors. It is concluded that standardization of computers is not as beneficial as the standardization of computer architecture and the basic components which go into making them. It is also concluded that charge-coupled devices (CCD) or other solid state star tracking devices offer considerable advantages over the image-dissector type of star tracker.

Lowrie, J. W.↗
NASA NTRS1989

A solid state lightning propagation speed sensor

A device to measure the propagation speeds of cloud-to-ground lightning has been developed. The lightning propagation speed (LPS) device consists of eight solid state silicon photodetectors mounted behind precision horizontal slits in the focal plane of a 50-mm lens on a 35-mm camera. Although the LPS device produces results similar to those obtained from a streaking camera, the LPS device has the advantages of smaller size, lower cost, mobile use, and easier data collection and analysis. The maximum accuracy for the LPS is 0.2 microsec, compared with about 0.8 microsecs for the streaking camera. It is found that the return stroke propagation speed for triggered lightning is different than that for natural lightning if measurements are taken over channel segments less than 500 m. It is suggested that there are no significant differences between the propagation speeds of positive and negative flashes. Also, differences between natural and triggered dart leaders are discussed.

Mach, Douglas M.↗
NASA NTRS1999

Temperature Control of Avalanche Photodiode Using Thermoelectric Cooler

Avalanche photodiodes (APDS) are quantum optical detectors that are used for visible and near infrared optical detection applications. Although APDs are compact, rugged, and have an internal gain mechanism that is suitable for low light intensity; their responsivity, and therefore their output, is strongly dependent on the device temperature. Thermoelectric coolers (TEC) offers a suitable solution to this problem. A TEC is a solid state cooling device, which can be controlled by changing its current. TECs are compact and rugged, and they can precisely control the temperature to within 0.1 C with more than a 150 C temperature gradient between its surfaces. In this Memorandum, a proportional integral (PI) temperature controller for APDs using a TEC is discussed. The controller is compact and can successfully cool the APD to almost 0 C in an ambient temperature environment of up to 27 C.

Refaat, Tamer F.↗
NASA NTRS2002

Novel High Efficient Organic Photovoltaic Materials: Appendix for Summary of Research

There are many different kinds of conjugated polymers that may be useful in photovoltaic devices. So far, the most popular and successful conjugated polymers used in photovoltaic devices include poly(1,4-)phenylenevinylenes (PPV), C60 and their derivatives. The discovery of electro-luminescence in PPV has stimulated a great deal of interest in developing "plastic" solid-state semiconductor devices. The overall synthetic methodology for the preparation of PPV can be divided into three main categories: (1) side chain derivatization, (2) precursor approach, and (3) in-situ polymerization. In this project, the first method was adopted. As discussed in project proposal and literatures, the overall efficiency of photovoltaic devices containing conjugated polymers is determined by the materials ability to generate excitons from incoming radiation, and then to separate the charges at donor/acceptor interfaces, and then to transport charges to respective electrodes. Given that effective exciton diffusion range are typical less then 30 nm, unique morphological structures are needed. This need led to several research groups to the idea that interpenetrating or bi-continuous networks of donor (electron donating) and acceptor (electron withdrawing) polymers should give better results. One approach involved the use of functionalized PPV. The attachment of electron withdrawing cyano groups to a PPV forms the CN-PPV, making it a strong electron acceptor. Underivatized PPV is a generally considered a hole-transporting material. Using blends of MEH-PPV, a soluble donor PPV derivative, as a hole transporter and CN-PPV as an electron transporter, a quantum efficiencies of up to 6% was achieved.

Sun, Sam↗
DOE OSTI2026

Discovery of tunable and soluble organic emitters for solid-state lasers with a self-driving laboratory

We have recently demonstrated the ability of using self-driving laboratories for AI-driven searches of organic emitters for solid-state lasing devices. Our past workflow featured solubility challenges for such large molecular moieties. In this next-generation study, we return to the drawing board to explore a family of com-pounds that are much solution processable and composed of a set of electronic cores that provide a broader color response. Out of 252 potential candidates,and with guidance from DFT calculations, we selectively perform a compre-hensive study exploring 51 fluorene-based A-B-A type organic laser oligomers, armed with our self-driving lab. The candidates range from simple hydrocarbon molecules to complex hetero atom-mixed molecules. As a result of this study, we highlight diketopyrrolopyrrole and benzodiazole derivatives for their largely red-shifted emissions. Furthermore, we investigate the effect of color change aris-ing from hetero atom permutation, fluorine addition, thiophene coupling, and a combination of fluorine addition and thiophene coupling. Amplified spontaneous emission (ASE) measurements in the solid state further corroborate the lasing potential of selected candidates, reinforcing their suitability for future device applications. The computational study with density functional theory confirms the experimental results.

fluorescence↗
NASA NTRS1966

Applications of models to circuits

Active device models for linear circuit application and their application to design of operational amplifier and emitter-peaked voltage amplifier stage

SOLID STATE DEVICE↗
NASA NTRS1972

Economic analysis of crystal growth in space

Many advanced electronic technologies and devices for the 1980's are based on sophisticated compound single crystals, i.e. ceramic oxides and compound semiconductors. Space processing of these electronic crystals with maximum perfection, purity, and size is suggested. No ecomonic or technical justification was found for the growth of silicon single crystals for solid state electronic devices in space.

Ulrich, D. R.↗
NASA NTRS1993

Astro-D Prelaunch Mission Operation Report (MOR)

The Prelaunch Mission Operation Report for the Astro-D mission is enclosed for your information. Astro-D is a Japanese-led program involving the United States as a participating partner. The Japanese Institute of Space and Astronautical Science (ISAS) provides overall program management, the launch vehicle, the spacecraft, and two Gas Scintillation Imaging System detectors. NASA is providing four nested, thin-foil, grazing-incidence telescope mirrors and two X-ray charged-coupled device solid-state detectors. NASA also provides telemetry tracking support using Deep Space Network ground stations. In return for its scientific instrument contribution, the U.S. will receive 15 percent of the observing time and will share an additional 25 percent for collaborative U.S./Japan scientific investigations. Launch is scheduled for mid- February 1993 from the ISAS launch center near Kagoshima in southern Japan. This MOR: (a) describes the NASA objectives for the Astro-D mission; (b) provides brief descriptions of the spacecraft and its scientific instruments; (c) provides a chronology of launch and deployment; and (d) describes the ground operation elements that support the mission. .

Source record↗
NASA NTRS2014

Novel Materials, Processing and Device Technologies for Space Exploration with Potential Dual-Use Applications

We highlight results of a broad spectrum of efforts on lower-temperature processing of nanomaterials, novel approaches to energy conversion, and environmentally rugged devices. Solution-processed quantum dots of copper indium chalcogenide semiconductors and multiwalled carbon nanotubes from lower-temperature spray pyrolysis are enabled by novel (precursor) chemistry. Metal-doped zinc oxide (ZnO) nanostructured components of photovoltaic cells have been grown in solution at low temperature on a conductive indium tin oxide substrate. Arrays of ZnO nanorods can be templated and decorated with various semiconductor and metallic nanoparticles. Utilizing ZnO in a more broadly defined energy conversion sense as photocatalysts, unwanted organic waste materials can potentially be repurposed. Current efforts on charge carrier dynamics in nanoscale electrode architectures used in photoelectrochemical cells for generating solar electricity and fuels are described. The objective is to develop oxide nanowire-based electrode architectures that exhibit improved charge separation, charge collection and allow for efficient light absorption. Investigation of the charge carrier transport and recombination properties of the electrodes will aid in the understanding of how nanowire architectures improve performance of electrodes for dye-sensitized solar cells. Nanomaterials can be incorporated in a number of advanced higher-performance (i.e. mass specific power) photovoltaic arrays. Advanced technologies for the deposition of 4H-silicon carbide are described. The use of novel precursors, advanced processing, and process studies, including modeling are discussed from the perspective of enhancing the performance of this promising material for enabling technologies such as solar electric propulsion. Potential impact(s) of these technologies for a variety of aerospace applications are highlighted throughout. Finally, examples are given of technologies with potential spin-offs for dual-use or terrestrial applications.

solid state devices↗
DOE OSTI2026

A Quinoidal Two‐Dimensional Metal–Organic Framework for High‐Performance Micro‐Supercapacitors and Solid‐State Lithium Batteries

Two-dimensional (2D) metal-organic frameworks (MOFs) integrating redox-active linkers enable dense charge sites and open ion pathways for microscale energy storage. We report a quinoidal dicarboxylate ligand, AQM-H2L, derived from p-azaquinodimethane, forming crystalline frameworks with Cu2+ and Zn2+ nodes. The Cu-based MOF (AQM-AQM-H2L-Cu) exhibits layered sheets (>14 Å spacing) constructed from dinuclear Cu-carboxylate units and conjugated AQM linkers, which narrow the bandgap and introduce Cu2+/Cu+ pseudocapacitance. Exfoliated nanosheets (∼5 nm) retain crystallinity and excellent processability. Integrated into graphene films, they deliver areal and volumetric capacitances of 29.6 mF cm-2 and 18.1 F cm-3, achieving 2.6 mWh cm-3 energy density at 160 mW cm-3. As ionic fillers (1 wt%) in PEO solid polymer electrolytes, the nanosheets markedly enhance LiFePO4 cell performance, affording 169.8 mAh g-1 at 0.2 C and 93% retention after 400 cycles. This work establishes quinoidal linkers as a compact and robust design motif for ionically active 2D frameworks toward high-performance miniature and solid-state energy devices.

Chen, Ziman↗
DOE OSTI2025

One Pot Synthesis of Cyan Emitting CdZnSSe Quantum Dots for Human Centric Lighting

A one pot synthesis of blue and green emissive CdZnSSe quantum dots (QDs) from thio- and selenoureas and Cd and Zn carboxylates is optimized using high throughput robotic optimization. A large set of spectral data (N = 192) is used to train machine learning models that accurately predict the photoluminescence emission wavelength (λmax) and full-width half-maximum, and the relative photoluminescence quantum yield (PLQY) from the S:Se and Zn:Cd stoichiometries and reaction time. ZnS shells are deposited on the crude QD heterostructures using 4-tert-butylbenzyl mercaptan, a more reactive source of sulfide that enables shell growth below the temperature where ion diffusion in the QD can broaden its optical spectrum (≤275 °C). These optimized procedures provide gram quantities of blue-green emitting QDs (PLQY = 85–99%) in a single reaction vessel. A solid state lighting device (4260 K) that incorporates cyan emissive QDs achieved a higher luminous efficacy of 179 lm/W and melanopic daylight efficiency ratio (0.71) than existing commercial human centric lighting devices.

Jordan, Abraham J↗
DOE OSTI2025

A General and Modular Approach to Solid-State Integration of Zero-Dimensional Quantum Systems

Here, we present an all-electrical readout mechanism for quasi-0D quantum states (0D-QS), such as point defects, adatoms, and molecules, that is modular and general, providing an approach that is amenable to scaling and integration with other solid-state quantum technologies. Our approach relies on the creation of high-quality tunnel junctions via the mechanical exfoliation and stacking of multilayer graphene (MLG) and hexagonal boron nitride (hBN) to encapsulate the target system in an MLG/hBN/0D-QS/hBN/MLG heterostructure. This structure allows for all-electronic spectroscopy and readout of candidate systems through a combination of coulomb and spin-blockade. As a proof of principle, we demonstrate electronic tunneling spectroscopy of point defects in hBN and the molecular qubit vanadyl phthalocyanine. Our approach demonstrates a new pathway for the incorporation of molecules and atomic defects into solid-state quantum devices and circuits along with a readout scheme that does not rely on highly constrained optical processes for photonic readout.

defects in hexagonal boron nitride↗