Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source contribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Petrology of Apollo 15 station 9A surface and drive tube soils

Modal analysis data are presented for six samples from the upper part of the Apollo 15 lunar core 15010/011 in order to further investigate the maturation profile of the core and to estimate the source rock contribution. The core data are compared with those of the adjacent soils 15531 and 15601. The soils analyzed are relatively immature and remarkably homogeneous. Surface soil 15531 is the most immature one, which is attributed to the fact that it was sampled from the rim of a relatively recent 3 m-diameter crater and thus contains an admixture of fresh bedrock material ejected by this cratering event. The major source of rock contribution to the soils is from petrographically identifiable mare basalts (about 89% to the core and to 15601 and about 87% to 15531). Olivine basalts and quartz normative basalts occur in an approximate ratio of 3:1; contributions of KREEP basalts and the Front are relatively minor.

Griffiths, S. A.↗

The chlorine budget of the present-day atmosphere - A modeling study

The contribution of source gases to the total amount of inorganic chlorine (ClY) is examined analytically with a time-dependent model employing 11 source gases. The source-gas emission data are described, and the modeling methodology is set forth with attention given to the data interpretation. The abundances and distributions are obtained for all 11 source gases with corresponding ClY production rates and mixing ratios. It is shown that the ClY production rate and the ClY mixing ratio for each source gas are spatially dependent, and the change in the relative contributions from 1950 to 1990 is given. Ozone changes in the past decade are characterized by losses in the polar and midlatitude lower stratosphere. The values for CFC-11, CCl4, and CH3CCl3 suggest that they are more evident in the lower stratosphere than is suggested by steady-state estimates based on surface concentrations.

Weisenstein, Debra K.↗

Seasonal Impact of Regional Outdoor Biomass Burning on Air Pollution in Three Indian Cities: Delhi, Bengaluru, and Pune

Air pollution in many of India's cities exceeds national and international standards, and effective pollution control strategies require knowledge of the sources that contribute to air pollution and their spatiotemporal variability. In this study, we examine the influence of a single pollution source, outdoor biomass burning, on particulate matter (PM) concentrations, surface visibility, and aerosol optical depth (AOD) from 2007 to 2013 in three of the most populous Indian cities. We define the upwind regions, or "airsheds," for the cities by using atmospheric back trajectories from the HYSPLIT model. Using satellite fire radiative power (FRP) observations as a measure of fire activity, we target pre-monsoon and post-monsoon fires upwind of the Delhi National Capital Region and pre-monsoon fires surrounding Bengaluru and Pune. We find varying contributions of outdoor fires to different air quality metrics. For the post-monsoon burning season, we find that a subset of local meteorological variables (air temperature, humidity, sea level pressure, wind speed and direction) and FRP as the only pollution source explained 39% of variance in Delhi station PM(sub 10) anomalies, 77% in visibility, and 30% in satellite AOD; additionally, per unit increase in FRP within the daily airshed (1000 MW), PM(sub 10) increases by 16.34 micrograms per cubic meter, visibility decreases by 0.097 km, and satellite AOD increases by 0.07. In contrast, for the pre-monsoon burning season, we find less significant contributions from FRP to air quality in all three cities. Further, we attribute 99% of FRP from post-monsoon outdoor fires within Delhi's average airshed to agricultural burning. Our work suggests that although outdoor fires are not the dominant air pollution source in India throughout the year, post-monsoon fires contribute substantially to regional air pollution and high levels of population exposure around Delhi. During 3-day blocks of extreme PM(sub 2.5) in the 2013 post-monsoon burning season, which coincided with statistically significant high fire activity, concentrations in Delhi averaged 304 micrograms per cubic meter, or more than 1000% above the 24-h PM(sub 2.5) guideline (25 micrograms per cubic meter) of the World Health Organization. These results suggest that providing viable alternatives to agricultural residue burning could help improve post-monsoon air quality for a growing population of 63 million (39% in urban areas) within Delhi's airshed.

Air quality; Outdoor fires; Crop residue burning; ↗

Contribution from TeV halos to the isotropic gamma-ray background

We report recent observations have shown that pulsars are surrounded by extended regions which emit TeV-scale gamma rays through the inverse Compton scattering of very high energy electrons and positrons. Such TeV halos are responsible for a large fraction of the Milky Way’s TeV-scale gamma-ray emission. In this paper, we calculate the gamma-ray spectrum from the population of TeV halos located within the Andromeda Galaxy, predicting a signal that is expected to be detectable by the Cherenkov Telescope Array. We also calculate the contribution from TeV halos to the isotropic gamma-ray background, finding that these sources should contribute significantly to this flux at the highest measured energies, constituting up to ~20 % of the signal observed above ~0.1TeV. We also comment on the implications of our results for the origin of the diffuse neutrino flux detected by IceCube.

79 ASTRONOMY AND ASTROPHYSICS↗

Design and Analysis Tools for Concurrent Blackboard Systems

A blackboard system consists of a set of knowledge sources, a blackboard data structure, and a control strategy used to activate the knowledge sources. The blackboard model of problem solving is best described by Dr. H. Penny Nii of the Stanford University AI Laboratory: "A Blackboard System can be viewed as a collection of intelligent agents who are gathered around a blackboard, looking at pieces of information written on it, thinking about the current state of the solution, and writing their conclusions on the blackboard as they generate them. " The blackboard is a centralized global data structure, often partitioned in a hierarchical manner, used to represent the problem domain. The blackboard is also used to allow inter-knowledge source communication and acts as a shared memory visible to all of the knowledge sources. A knowledge source is a highly specialized, highly independent process that takes inputs from the blackboard data structure, performs a computation, and places the results of the computation in the blackboard data structure. This design allows for an opportunistic control strategy. The opportunistic problem-solving technique allows a knowledge source to contribute towards the solution of the current problem without knowing which of the other knowledge sources will use the information. The use of opportunistic problem-solving allows the data transfers on the blackboard to determine which processes are active at a given time. Designing and developing blackboard systems is a difficult process. The designer is trying to balance several conflicting goals and achieve a high degree of concurrent knowledge source execution while maintaining both knowledge and semantic consistency on the blackboard. Blackboard systems have not attained their apparent potential because there are no established tools or methods to guide in their construction or analyze their performance.

McManus, John W.↗

The Effect of Blazar Spectral Breaks on the Blazar Contribution to the Extragalactic Gamma-Ray Background

The spectral shapes of the contributions of different classes of unresolved gamma-ray emitters can provide insight into their relative contributions to the extragalactic gamma-ray background (EGB) and the natures of their spectra at GeV energies, We calculate the spectral shapes of the contributions to the EGB arising from BL Lacertae type objects (BL Lacs) and flat-spectrum radio quasars (FSRQs) assuming blazar spectra can be described as broken power laws, We fit the resulting total blazar spectral shape to the Fermi Large Area Telescope measurements of the EGB, finding that the best-fit shape reproduces well the shape of the Fermi EGB for various break scenarios. We conclude that a scenario in which the contribution of blazars is dominant cannot be excluded on spectral grounds alone, even if spectral breaks are shown to be common among Fermi blazars. We also find that while the observation of a featureless (within uncertainties) power-law EGB spectrum by Fermi does not necessarily imply a single class of contributing unresolved sources with featureless individual spectra, such an observation and the collective spectra of the separate contributing populations determine the ratios of their contributions. As such, a comparison with studies including blazar gamma-ray luminosity functions could have profound implications for the blazar contribution to the EGB, blazar evolution, and blazar gamma-ray spectra and emission.

Venters, Tonia M.↗

Contribution of the World's Main Dust Source Regions to the Global Cycle of Desert Dust

Even though desert dust is the most abundant aerosol by mass in Earth's atmosphere, the relative contributions of the world's major source regions to the global dust cycle remain poorly constrained. This problem hinders accounting for the potentially large impact of regional differences in dust properties on clouds, the Earth's energy balance, and terrestrial and marine biogeochemical cycles. Here, we constrain the contribution of each of the world's main dust source regions to the global dust cycle. We use an analytical framework that integrates an ensemble of global aerosol model simulations with observationally informed constraints on the dust size distribution, extinction efficiency, and regional dust aerosol optical depth (DAOD). We obtain a dataset that constrains the relative contribution of nine major source regions to size-resolved dust emission, atmospheric loading, DAOD, concentration, and deposition flux. We find that the 22–29 Tg (1 standard error range) global loading of dust with a geometric diameter up to 20 µm is partitioned as follows: North African source regions contribute ∼ 50 % (11–15 Tg), Asian source regions contribute ∼ 40 % (8–13 Tg), and North American and Southern Hemisphere regions contribute ∼ 10 % (1.8–3.2 Tg). These results suggest that current models on average overestimate the contribution of North African sources to atmospheric dust loading at ∼ 65 %, while underestimating the contribution of Asian dust at ∼ 30 %. Our results further show that each source region's dust loading peaks in local spring and summer, which is partially driven by increased dust lifetime in those seasons. We also quantify the dust deposition flux to the Amazon rainforest to be ∼ 10 Tg yr−1, which is a factor of 2–3 less than inferred from satellite data by previous work that likely overestimated dust deposition by underestimating the dust mass extinction efficiency. The data obtained in this paper can be used to obtain improved constraints on dust impacts on clouds, climate, biogeochemical cycles, and other parts of the Earth system.

Dust↗

All-sky Search for Transient Astrophysical Neutrino Emission with 10 Years of IceCube Cascade Events

Abstract Neutrino flares in the sky are searched for in data collected by IceCube between 2011 and 2021 May. This data set contains cascade-like events originating from charged-current electron neutrino and tau neutrino interactions and all-flavor neutral-current interactions. IceCube’s previous all-sky searches for neutrino flares used data sets consisting of track-like events originating from charged-current muon neutrino interactions. The cascade data set is statistically independent of the track data sets, and while inferior in angular resolution, the low-background nature makes it competitive and complementary to previous searches. No statistically significant flare of neutrino emission was observed in an all-sky scan. Upper limits are calculated on neutrino flares of varying duration from 1 hr to 100 days. Furthermore, constraints on the contribution of these flares to the diffuse astrophysical neutrino flux are presented, showing that multiple unresolved transient sources may contribute to the diffuse astrophysical neutrino flux.

79 ASTRONOMY AND ASTROPHYSICS↗

Flight survey of the 757 wing noise field and its effects on laminar boundary layer transition. Volume 1: Program description and data analysis

It was previously observed that an incident acoustic field on a wing with laminar flow can cause transition to turbulent flow if the fluctuating acoustic velocities are of sufficient amplitude and in the critical frequency range for an unstable laminar boundary layer. A section of a wing was modified with a natural laminar flow (NLF) glove to allow direct measurement of the effect of varying engine noise on the extent of laminar flow. The flight test program was completed in June, 1985. At each flight condition, the engine power was varied from about 2600 r/min (idle) to about 4500 r/min (maximum continuous power). The spectral data provides considerable insight into the influences of the various sound sources that contribute to the overall noise levels. Additional analysis will be required to assess the impact of these sources on boundary layer transition. These results demonstrate that substantial laminar flow on the wing of a transport configuration with wing-mounted engines can be obtained.

Source record↗

Interpretation of satellite airglow observations during the March 22, 1979, magnetic storm, using the coupled ionosphere-thermosphere model developed at University College, London

The University of California, Berkeley, extreme ultraviolet spectrometer aboard the U.S. Air Force STP 78-1 satellite measured emission features in the Earth's dayglow due to neutral and ionized species in the atmosphere, in the 35 to 140-nm range. The spectrometer was operating between March 1979 and March 1980, including the period of the magnetic storm on March 22, 1979. Some of these measurements are interpreted using the predictions of the three-dimensional time-dependent coupled ionosphere-thermosphere model developed at University College, London. The observations show a reduction in the atomic oxygen 130.4-nm airglow emission at high northern latitudes following the storm. Model simulations show that this reduction in 130.4-nm emission is associated with an increase in the O2/O ratio. Analysis of model results using electron transport and radiative transport codes show that the brightness of 130.4-nm emission at high latitudes due to resonantly scattered sunlight is approximately twice that due to photoelectron impact excitation. However, the observed decrease in the brightness at high northern latitudes is mainly due to a change in the photoelectron impact source, which contributes approximately 75% of the total, as well as its multiple scattering component; for the photoelectron impact source at 70 deg latitude and 200 km altitude, the reduction in multiple scattering is 1.5 times greater than the reduction in the initial excitation. The reduction in the airglow emission is visible only in the norther n hemisphere because the south pole was not sunlit over the storm period. The comparison of model results with observations suggests that 130.4-nm emission may be useful as a tracer for global changes in the concentration of atomic energy.

Parish, H. F.↗

The Orbiting Astrophysical Spectrometer In Space (OASIS)

The Orbiting Astrophysical Spectrometer In Space (OASIS) is an Advanced Concept currently understudy at NASA as a mission for the next decade. The goal of the OASIS mission is to identify a local site or sites where galactic cosmic rays (GCR) originate and are accelerated. The mission will allow GCR data to be used to investigate how elements are made and distributed in the galaxy and to improve our understanding of supernovae and the nucleosynthesis of the heavy elements needed for life. OASIS consists of two instruments that provide complementary data on the location and nature of the source(s) through investigating the composition of ultraheavy nuclei and the energy spectrum of electrons. OASIS will measure the relative abundances in the actinide group to determine the age of the r-process material in GCRs. The presence of young r-process material would indicate that GCRs are a sample of the interstellar medium in OB associations. OASIS will follow the electron spectrum to its high-energy end. The energy where this spectrum ends will tell us the distance to the nearest GCR source(s). OASIS will look for spectral features and anisotropy in the high energy electron spectrum that are expected to appear when only a few of the nearest sources can contribute the electron flux. Possibly these measurements will lead to the identification of the nearest cosmic ray electron source.

Christl, Mark J.↗

Verifying Mars 2020 Sampling and Caching Robotic Functions with Position Budgeting Process and Tool

The Mars 2020 Perseverance Rover was launched on July 30th, 2020 with one of the most complex robotic systems ever implemented on an interplanetary mission. Much of this robotic complexity resides in the Rover Sampling and Caching Subsystem (SCS) to enable collection of Martian samples for eventual return to earth and preparation of surfaces for close-up surface science observations. Two robotic arms are used by SCS: the large Robotic Arm (RA) positions the coring drill and science instruments mounted to the Turret for surface interactions, and the smaller Sample Handling Assembly (SHA) manipulates Sample Tube Assemblies (STA) within the Adaptive Caching Assembly (ACA) to prepare them for sample collection, processing, and hermetic sealing. The robotic arms interact with the Martian surface and other SCS components in many ways and in a variety of configurations, with positioning accuracy requirements ranging from tens of millimeters for some surface interactions down to sub-millimeter accuracy for some ACA interactions.This paper describes the process and tool used to calculate the SCS robotic interaction positioning budgets and verify the as-built hardware when delivered. To ensure that these robotic systems are able to perform their tasks, each robotic interaction with another element was broken down into its composite functions. To calculate a positioning budget margin for each function, an allowable was defined and then compared to the list of error sources that contribute to misalignment. Across the subsystem, over 250 functions were identified to be assessed, with almost 500 error sources feeding into their budget calculations. In addition to using as-built values in the budgets for SCS Verification and Validation (V&V) after the hardware was complete, these budgets were populated with design data during the design phase to identify areas of concern and guide hardware design to ensure positive position budget margins.Because of the size of the SCS team that had inputs to the positioning budgets and the sheer number of items in the budgets that needed to be created, updated, and verified, having a tool that would allow for simultaneous access and robust data integrity and processing was imperative. To accomplish this, a web-based MySQL database was created that allowed users to create function position budgets, link individual errors and allowables to them, and view function position budget margin reports. Each error and allowable records data for lateral, normal, angular, and clocking errors, with the ability to add as-built data for up to four different hardware builds. Margin reports can be generated for either design values alone or replacing design data with as-built data when available. These as-built reports are used for final verification of the SCS positioning requirements. Ultimately, the SCS positioning budget process and database tool led to successful interactions during test and an SCS robotic system that is ready to perform sample acquisition and caching on the surface of Mars.

Williams, Jeffrey↗

Global sources of local precipitation as determined by the NASA/GISS GCM

The origin of water precipitating in different geographic regions is investigated with the NASA/GISS GCM. Water evaporating from various source regions is 'tagged' and then followed as a tracer in four model simulations, one for each season. The contributions of source region evaporations to simulated rainfall at specific locations is tabulated. The results show that in the summer, water vapor for midlatitude and high latitude precipitation tends to be recycled locally, whereas low latitude continental precipitation is more dependent on oceanic moisture sources.

Koster, R.↗

Quantifying urban, industrial, and background changes in NO2 during the COVID-19 lockdown period based on TROPOMI satellite observations

The COVID-19 lockdown had a large impact on anthropogenic emissions of air pollutants and particularly on nitrogen dioxide (NO 2 ). While the overall NO 2 decline over some large cities is well-established, understanding the details remains a challenge since multiple source categories contribute. In this study, a new method of isolation of three components (background NO 2 , NO 2 from urban sources, and NO 2 from industrial point sources) is applied to estimate the impact of the COVID-19 lockdown on each of them. The approach is based on fitting satellite data by a statistical model with empirical plume dispersion functions driven by a meteorological reanalysis. Population density and surface elevation data as well as coordinates of industrial sources were used in the analysis. The tropospheric NO 2 vertical column density (VCD) values measured by the Tropospheric Monitoring Instrument (TROPOMI) on board the Sentinel-5 Precursor over 261 urban areas for the period from 16 March to 15 June 2020 were compared with the average VCD values for the same period in 2018 and 2019. While the background NO 2 component remained almost unchanged, the urban NO 2 component declined by −18 % to −28 % over most regions. India, South America, and a part of Europe (particularly, Italy, France, and Spain) demonstrated a −40 % to −50 % urban emission decline. In contrast, the decline over urban areas in China, where the lockdown was over during the analysed period, was, on average, only -4.4± 8 %. Emissions from large industrial sources in the analysed urban areas varied greatly from region to region from -4.8 ± 6 % for China to -40 ± 10 % for India. Estimated changes in urban emissions are correlated with changes in Google mobility data (the correlation coefficient is 0.62) confirming that changes in traffic were one of the key elements in the decline in urban NO2 emissions. No correlation was found between changes in background NO2 and Google mobility data. On the global scale, the background and urban components were remarkably stable in 2018, 2019, and 2021, with averages of all analysed areas all being within ±2.5 % and suggesting that there were no substantial drifts or shifts in TROPOMI data. The 2020 data are clearly an outlier: in 2020, the mean background component for all analysed areas (without China) was -6.0 % ± 1.2 % and the mean urban component was -26.7 ± 2.6 % or 20σ below the baseline level from the other years.

COVID-19↗

The High Mosaicity Illusion: Revealing the True Physical Characteristics of Macromolecular Crystals

An experimental system and software have been developed for simultaneously measuring the diffraction resolution and mosaic spread of macromolecular crystals. Hundreds of reflection profiles over a wide resolution range were rapidly measured by using a charge coupled device (CCD) area detector in combination with superfine phi slicing data collection. The contributions of the X-ray beam to the reflection widths were minimized by using a highly-parallel, highly-monochromatic synchrotron source. These contributions and Lorentz effects were evaluated and deconvoluted from the recorded data. Data collection and processing is described. From one degree of superfine phi slice data collected on a crystal of manganese superoxide dismutase the mosaicity of 261 reflections were measured. The average mosaicity was 0.0101 degrees (0.0035) at the full-width-at-half-maximum (FWHM) and ranged from 0.0011 degrees to 0.0188 degrees. Each reflection profile was individually fit with two gaussian profiles with the first gaussian contributing 55% and the second contributing 35% of the reflection. On average, the mosaicity of the first gaussian was 0.0054 degrees (0.0015) and the second was 0.0061 degrees (0.0023). The mosaicity of the crystal was anisotropic with fh, f k, and fl values of 0.0068 degrees, 0.0140 degrees and 0.0046 degrees, respectively at the FWHM. The anisotropic mosaicity analysis indicates that the crystal is the most perfect in the I direction which corresponds to the favored growth direction of the crystal.

Bellamy, Henry↗

The Chandra Large Area Synoptic X-ray Survey (CLASXS) of the Lockman Hole-Northwest: The X-ray Catalog

We present the X-ray catalog and basic results from our Chandra Large Area Synoptic X-ray Survey (CLASXS) of the Lockman Hole-Northwest field. Our 9 ACIS-I fields cover a contiguous solid angle of approx. 0.4 sq deg and reach fluxes of 5 x 10(exp -16) ergs/sq cm/s (0.4-2 keV) and 3 x 10(exp -15) ergs/sq cm/s (2-8 keV). Our survey bridges the gap between ultradeep pencil-beam surveys, such as the Chandra Deep Fields (CDFs), and shallower, large area surveys, allowing a better probe of the X-ray sources that contribute most of the 2-10 keV cosmic X-ray background (CXB). We find a total of 525 X-ray point sources and 4 extended sources. At approx. 10(exp -14)ergs/sq cm/s (2-8 keV), our number counts are significantly higher than those of several non-contiguous, large area surveys. Such a large difference is an indication of clustering in the X-ray sources. On the other hand, the integrated flux from the CLASXS field, combined with ASCA and Chandra ultradeep surveys, is consistent with results from other large area surveys, within the variance of the CXB. We see spectral evolution in the hardening of the sources at fluxes below 10(exp -14) ergs/sq cm/s, which agrees with previous observations from Chandra and XMM-Newton. About 1/3 of the sources in the CLASXS field have multiple observations, allowing variability tests. Above 4 x 10(exp -14) ergs/sq cm/s (0.4-8 keV), approx. 61% of the sources are variable. We also investigated the spectral variability of the variable sources. While most show spectral softening with increasing flux, or no significant spectral change, there are a few sources that show a different trend. Four extended sources in CLASXS is consistent with the previously measured LogN-LogS of galaxy clusters. Using X-ray spectra and optical colors, we argue that 3 of the 4 extended sources are galaxy clusters or galaxy groups. We report the discovery of a gravitational lensing arc associated with one of these sources. Using red sequence and brightest cluster galaxy methods, we find that the redshifts of the extended sources are in the range z approx. 0.5 - 1. The inferred masses within the Einstein radii are consistent with the mass profiles of local groups scaled to the same virial radii.

Yang, Y.↗

The Contribution of z < or Approx. 6 Sources to the Spatial Coherence in the Unresolved Cosmic Near-Infrared and X-Ray Backgrounds

A spatial clustering signal has been established in Spitzer/IRAC measurements of the unresolved cosmic near-infrared background (CIB) out to large angular scales, approx. 1deg. This CIB signal, while significantly exceeding the contribution from the remaining known galaxies, was further found to be coherent at a highly statistically significant level with the unresolved soft cosmic X-ray background (CXB). This measurement probes the unresolved CXB to very faint source levels using deep near-IR source subtraction.We study contributions from extragalactic populations at low to intermediate redshifts to the measured positive cross-power signal of the CIB fluctuations with the CXB. We model the X-ray emission from active galactic nuclei (AGNs), normal galaxies, and hot gas residing in virialized structures, calculating their CXB contribution including their spatial coherence with all infrared emitting counterparts. We use a halo model framework to calculate the auto and cross-power spectra of the unresolved fluctuations based on the latest constraints of the halo occupation distribution and the biasing of AGNs, galaxies, and diffuse emission. At small angular scales (1), the 4.5microns versus 0.5-2 keV coherence can be explained by shot noise from galaxies and AGNs. However, at large angular scales (approx.10), we find that the net contribution from the modeled populations is only able to account for approx. 3% of the measured CIB×CXB cross-power. The discrepancy suggests that the CIB×CXB signal originates from the same unknown source population producing the CIB clustering signal out to approx. 1deg.

unresolved cosmic near infrared background (CIB)↗

Test Would Quantify Combustion Oxygen From Different Sources

Proposed isotope-enrichment scheme enables determination of contributions of dual sources of oxygen for combustion. Liquid oxygen or other artificial stream enriched with O(18) to about 1 percent by weight. Combustion products analyzed by mass spectrometer to measure relative abundances of H2O(18) and H2O(16). From relative abundances of water products measured, one computes relative contribution of oxygen extracted from stream compared to other source of oxygen in combustion process. Used to determine contributions of natural oxygen in air and liquid oxygen supplied in separate stream mixed with air or sent directly into combustion chamber.

Tapphorn, Ralph M.↗