Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stellar oscillations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

155 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Luminous Blue Variable Outbursts from the Variations of Helium Opacity

Luminous blue variables are evolved massive stars that exhibit poorly understood variability on timescales from months to years with significant mass loss rates. They typically reach an effective temperature of ≈ 9000K during outbursts. These variations and large mass loss rates are believed to be caused by the radiation force on the cooler, more opaque outer layers that can balance or even exceed the force of gravity, although the exact mechanisms for the outburst and variability are unknown and cannot be calculated in one dimension. Here we report three dimensional simulations of radiation-dominated massive stars, which show that helium opacity plays an important role for the outburst and setting the observed effective temperature ≈ 9000K. It also likely triggers the episodic mass loss at rates of 10(exp -7) – 10(exp -5)M(sub ⨀)/yr. The helium opacity peak only shows up in our three-dimensional simulations but not in one dimensional calculation because the envelope structures need to be determined self-consistently with convection. The simulations not only reproduce similar observed long time scale variabilities, but also predict that convection causes irregular envelope oscillations and 10-30% brightness variations on a typical timescale of a few days and reaches larger amplitudes for even cooler stars. These short time scale variabilities should be observed with future high cadence observations.

Helium opacities↗
NASA NTRS1990

The varieties of symmetric stellar rings and radial caustics in galaxy disks

Numerical, restricted three-body and analytic calculations are used to study the formation and propagation of cylindrically symmetric stellar ring waves in galaxy disks. It is shown that such waves can evolve in a variety of ways, depending on the amplitude of the perturbation and the potential of the target galaxy. Rings can thicken as they propagate outward, remain at a nearly constant width, or be pinched off at large radii. Multiple, closely spaced rings can result from a low-amplitude collision, while an outer ring can appear well-separated from overlapping inner rings or an apparent lens structure in halo-dominated potentials. All the single-encounter rings consist of paired fold caustics. The simple, impulsive, kinematic oscillation equations appear to provide a remarkably accurate model of the numerical simulations. Simple analytic approximations to these equations permit very good estimates of oscillation periods and amplitudes, the evolution of ring widths, and ring birth and propagation characteristics.

Struck-Marcell, Curtis↗
NASA NTRS2025

Line List for the A 2 Π−X 2 Σ + and the B 2 Σ + −X 2 Σ + Band Systems of CaF

The spectral analysis of molecule-rich asymptotic giant branch (AGB) stars is challenging. Although other calcium and fluorine bearing molecules are observed in the microwave and in the visible spectrum of AGB stars, CaF has never been detected, despite favorable chemical equilibrium predictions. Yet, measuring the CaF abundance could give more insight into the fluorine budget of AGB stars and allow better simulation of stellar spectra. In this work, we present an analysis of the visible spectrum of CaF obtained with a Fourier transform spectrometer. CaF A 2 Π−X 2 Σ + and the B 2 Σ + −X 2 Σ + band systems were excited with a hollow cathode discharge. Using previous fluorescence spectroscopy measurements, highly accurate ground state constants, and reasonable extrapolation schemes, the strongest features of CaF in the visible spectrum can be accurately modeled for both band systems. Spectroscopic constants are determined for A 2 Π with v ≤ 16 and for B 2 Σ + with v ≤ 20. Ab initio transition dipole moment curves of both transitions were calculated and scaled, and we provide a line list with Einstein A coefficients and oscillator strengths. This line list can be used to simulate spectra of CaF at temperatures and pressures relevant to astrophysical environments.

Léo Lavy↗
NASA NTRS1984

A unified N-body and statistical treatment of stellar dynamics. I - The hybrid code. II - Applications to globular cluster cores

A unified N-body and statistical treatment of stellar dynamics is developed and applied to the late stages of core collapse and early stages of post collapse evolution in globular clusters. A 'hybrid' computer code is joined to a direct N-body code which is used to calculate exactly the behavior of particles in the inner spatial region, and the combination is used to follow particles statistically in the outer spatial region. A transition zone allows the exchange of particles and energy between the two regions. The main application results include: formation of a hard central binary system, reversal of core collapse and expansion due to the heat input from this binary, ejection of the binary from the core, and recollapse of the core; density profiles that form a one-parameter sequence during the core oscillations; and indications that these oscillations will eventually cease.

Mcmillan, S. L. W.↗
NASA NTRS2021

Effects of Spin-Orbit Resonances and Tidal Heating on the Inner Edge of the Habitable Zone

Much attention has been given to the climate dynamics and habitable boundaries of synchronously rotating planets around low mass stars. However, other rotational states are possible, including spin–orbit resonant configurations, particularly when higher eccentricity orbits can be maintained in a system. Additionally, the oscillating strain as a planet moves from periastron to apoastron results in friction and tidal heating, which can be an important energy source. Here, we simulate the climate of ocean-covered planets near the inner edge of the habitable zone around M to solar stars with the NASA GISS ROCKE-3D general circulation model, and leverage the planetary evolution software package, VPLanet, to calculate tidal heating rates for Earth-sized planets orbiting 2600 and 3000 K stars. This study is the first to use a 3D general circulation model that implements tidal heating to investigate habitability for multiple resonant states. We find that for reference experiments without tidal heating, the resonant state has little impact on the radial position of the inner edge because for a given stellar flux, higher-order states tend to be warmer than synchronous rotators, but for a given temperature, have drier upper atmospheres. However, when strong tidal heating is present, the rotational component implies a strong dependence of habitable conditions on the system evolution and rotational state. Since tidal and stellar heating both decrease rapidly with orbital distance, this results in a compact orbital width separating temperate and uninhabitable climates. We summarize these results and also compare ROCKE-3D to previously published simulations of the inner edge.

Spin-Orbit Resonances↗
NASA NTRS1982

A numerical simulation of the magnetospheric gate model for the X-ray bursters

A Lagrangian, stellar interior computer code which assumes radiation transport by diffusion is used to numerically simulate an X-ray burst occurring on a rapidly rotating, 1 solar mass neutron star accreting material from a companion in noncontinuous, episodic fashion. The blob of gas from the companion extends from the surface of the neutron star to a radius of 185 km, is optically thick, has mass of 10 to the -11th solar masses, and is initially at rest with respect to the surface. The gas initially has a temperature of about 10 million K and a surface luminosity of 0.1 that of the sun. The infall results in a burst which lasts about 0.1 second and reaches a peak luminosity and effective temperature of 240,000 suns and nine million K. The burst is followed by a phase of oscillations with a period of 0.2 second. It is found that the burst is too cool and rapid to resemble normal bursts, although the time scale is in agreement with some observations.

Starrfield, S.↗
NASA NTRS2009

QPOs from Random X-ray Bursts around Rotating Black Holes

We continue our earlier studies of quasi-periodic oscillations (QPOs) in the power spectra of accreting, rapidly-rotating black holes that originate from the geometric 'light echoes' of X-ray flares occurring within the black hole ergosphere. Our present work extends our previous treatment to three-dimensional photon emission and orbits to allow for arbitrary latitudes in the positions of the distant observers and the X-ray sources in place of the mainly equatorial positions and photon orbits of the earlier consideration. Following the trajectories of a large number of photons we calculate the response functions of a given geometry and use them to produce model light curves which we subsequently analyze to compute their power spectra and autocorrelation functions. In the case of an optically-thin environment, relevant to advection-dominated accretion flows, we consistently find QPOs at frequencies of order of approximately kHz for stellar-mass black hole candidates while order of approximately mHz for typical active galactic nuclei (approximately equal to 10(exp 7) solar mass) for a wide range of viewing angles (30 degrees to 80 degrees) from X-ray sources predominantly concentrated toward the equator within the ergosphere. As in out previous treatment, here too, the QPO signal is produced by the frame-dragging of the photons by the rapidly-rotating black hole, which results in photon 'bunches' separated by constant time-lags, the result of multiple photon orbits around the hole. Our model predicts for various source/observer configurations the robust presence of a new class of QPOs, which is inevitably generic to curved spacetime structure in rotating black hole systems.

Kukumura, Keigo↗
NASA NTRS1991

Nonlinear evolution of accretion disks induced by radiative feedback processes

The existence of accretion disks around young stellar objects has recently become widely accepted. The luminosity of some young stellar objects is highly variable and is generally attributed to the release of gravitational energy from matter funneled onto them by accretion disks. The inward transport of matter through these disks is coupled to the outward transfer of angular momentum. This transfer is most likely to be regulated by the mixing of adjacent annuli through the process of large-scale turbulence. Most of the accretion energy generated by this process emerges near the inner edge of the disk. This radiation may be intercepted by the disk and may modify the vertical and viscous evolution of the disk itself. If surface heating can stabilize the disk against the dominant viscous process, then in systems with large accretion rates, angular momentum transport and mass flow through the disk will be quenched. Using this result, it is shown that such a mechanism can induce feedback through the disk which produces oscillations in the luminosity of the central object. This oscillation can become chaotic in certain regimes and might thus explain the highly variable nature of many T Tauri systems and their outbursting counterparts: the FU Orionis objects.

Bell, K. R.↗
NASA NTRS2011

Phase-Controlled Magnetic Mirror for Wavefront Correction

Typically, light interacts with matter via the electric field and interaction with weakly bound electrons. In a magnetic mirror, a patterned nanowire is fabricated over a metallic layer with a dielectric layer in between. Oscillation of the electrons in the nanowires in response to the magnetic field of incident photons causes a re-emission of photons and operation as a "magnetic mirror." By controlling the index of refraction in the dielectric layer using a local applied voltage, the phase of the emitted radiation can be controlled. This allows electrical modification of the reflected wavefront, resulting in a deformable mirror that can be used for wavefront control. Certain applications require wavefront quality in the few-nanometer regime, which is a major challenge for optical fabrication and alignment of mirrors or lenses. The use of a deformable magnetic mirror allows for a device with no moving parts that can modify the phase of incident light over many spatial scales, potentially with higher resolution than current approaches. Current deformable mirrors modify the incident wavefront by using nano-actuation of a substrate to physically bend the mirror to a desired shape. The purpose of the innovation is to modify the incident wavefront for the purpose of correction of fabrication and alignment-induced wavefront errors at the system level. The advanced degree of precision required for some applications such as gravity wave detection (LISA - Laser Interferometer Space Antenna) or planet finding (FKSI - Fourier-Kelvin Stellar Interferometer) requires wavefront control at the limits of the current state of the art. All the steps required to fabricate a magnetic mirror have been demonstrated. The modification is to apply a bias voltage to the dielectric layer so as to change the index of refraction and modify the phase of the reflected radiation. Light is reflected off the device and collected by a phase-sensing interferometer. The interferometer determines the initial wavefront of the device and fore optics. A wavefront correction is calculated, and voltage profile for each nanowire strip is determined. The voltage is applied, modifying the local index of refraction of the dielectric under the nanowire strip. This modifies the phase of the reflected light to allow wavefront correction.

Hagopian, John↗
NASA NTRS2020

High Resolution Photoexcitation Measurements Exacerbate the Long-Standing Fe XVII Oscillator Strength Problem

For more than 40 years, most astrophysical observations and laboratory studies of two key soft x-ray diagnostic 2p - 3d transitions, 3C and 3D, in Fe XVII ions found oscillator strength rations f(3C)/f(3D) disagreeing with theory, but uncertainties had precluded definitive statements on this much studied conundrum. Here, we resonantly excite these lines using synchrotron radiation at PETRA III, and reach, at a millionfold lower photon intensities, a 10 times higher spectral resolution, and 3 times smaller uncertainty than earlier work. Our final result of f(3C)/f(3D) = 3.09(8)(6) supports many of the earlier clean astrophysical and laboratory observations, while departing by five sigmas from our own newest large-scale ab initio calculations, and excluding all proposed explanations, including those invoking nonlinear effects and population transfers.

Electron-ion collisions↗
NASA NTRS1998

Turbulent Compressible Convection with Rotation: Mean Flows and Differential Rotation - 2

The effects of rotation on turbulent, compressible convection within stellar envelopes are studied through three-dimensional numerical simulations conducted within a local f-plane model. This work seeks to understand the types of differential rotation that can be established in convective envelopes of stars like the Sun, for which recent helioseismic observations suggest an angular velocity profile with depth and latitude at variance with many theoretical predictions. This paper analyzes the mechanisms that are responsible for the mean (horizontally averaged) zonal and meridional flows that are produced by convection influenced by Coriolis forces. The compressible convection is considered for a range of Rayleigh, Taylor, and Prandtl (and thus Rossby) numbers encompassing both laminar and turbulent flow conditions under weak and strong rotational constraints. When the nonlinearities are moderate, the effects of rotation on the resulting laminar cellular convection leads to distinctive tilts of the cell boundaries away from the vertical. These yield correlations between vertical and horizontal motions that generate Reynolds stresses that can drive mean flows, interpretable as differential rotation and meridional circulations. Under more vigorous forcing, the resulting turbulent convection involves complicated and contorted fluid particle trajectories, with few clear correlations between vertical and horizontal motions, punctuated by an evolving and intricate downflow network that can extend over much of the depth of the layer. Within such networks are some coherent structures of vortical downflow that tend to align with the rotation axis. These yield a novel turbulent alignment mechanism, distinct from the laminar tilting of cellular boundaries, that can provide the principal correlated motions and thus Reynolds stresses and subsequently mean flows. The emergence of such coherent structures that can persist amidst more random motions is a characteristic of turbulence with symmetries broken by rotation and stratification. Such structure is here found to play a crucial role in defining the mean zonal and meridional flows that coexist with the convection. Though they are subject to strong inertial oscillations, the strength and type of the mean flows are determined by a combination of the laminar tilting and the turbulent alignment mechanisms. Varying the parameters produces a wide range of mean motions. Among these, some turbulent solutions exhibit a mean zonal velocity profile that is nearly constant with depth, much as deduced by helioseismology at midlatitudes within the Sun. The solutions exhibit a definite handedness, with the direction of the persistent mean flows often prescribing a spiral with depth near the boundaries, also in accord with helioseismic deductions. The mean helicity has a profile that is positive in the upper portion of the domain and negative in the lower portion, a property bearing on magnetic dynamo processes that may be realized within such rotating layers of turbulent convection.

Brummell, Nicholas H.↗