Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Planar Self-similar Antennas for Broadband Millimeter-Wave Measurements

Self-similar antennas offer extremely broadband functionality and easily scalable designs. Self-similar designs with a four-arm layout are also suited for dual polarization through excitations of opposing arms, although there has only been limited use of them for millimeter-wave detectors. These antennas have been used for measurements of the cosmic microwave background (CMB), which encompass a wide frequency range and are now actively focusing more on polarization anisotropies. Here, we analyze multiple planar self-similar antenna designs with simulations in high-frequency structure simulator and ongoing physical testing. They all exhibit broadband operation between 130 and 230 GHz and can couple to both linear polarizations through the previously mentioned four-arm symmetry. Furthermore, simulations include each antenna design coupled to an extended hemispherical, AR-coated lenslet. From these, a basic bowtie-like arm design produced minimal polarization wobble with moderate beam efficiency, while a hybrid trapezoidal design provided high beam efficiency with small polarization wobble. Current fabrication versions of each are being tested, coupled to multichroic microwave kinetic inductance detectors. These planar self-similar antennas, when implemented in CMB and other detectors, could improve observations while simultaneously simplifying fabrication and detector layout.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Full-Wave and Circuit-Based Simulations of Cable Insulation Aging/Damage Using Time-Frequency Domain Reflectometry

This paper presents a combined full-wave and circuit-based simulation study to investigate the important topic of cable insulation aging and physical damage. The analysis employs the time-frequency domain reflectometry (TFDR) technique that combines the advantages of both time domain reflectometry (TDR) and frequency domain reflectometry (FDR) for improved location identification and feature resolution. Coaxial cable sections with a location containing insulation aging or physical damage are simulated using Ansys High Frequency Structure Simulator (HFSS). Simulated scattering (S) parameters are then imported into the Advanced Design System (ADS) solver for time domain simulation where a Gaussian windowed chirp signal or ‘chirplet’ is launched. Finally, continuous wavelet transform (CWT) is applied in MATLAB to perform time-frequency analysis of the reflected waveforms. The results reveal that a small change in the relative permittivity of the insulation or the presence of a small point of physical damage on the insulation is reflected as a considerable change in the CWT magnitude demonstrating the efficacy of the method.

cable aging, Non Destructive Examination, time-fre↗
DOE OSTI2020

Grating Polarizers at 170 GHz for ECRH Systems: Low Power Tests and Simulations

The elliptical polarization produced by a pair of sinusoidally profiled miter-bend grating polarizers has been measured experimentally and found to be in excellent agreement with theory. The polarizers were designed to be used at 170 GHz in the miter bends of a 63.5 mm corrugated metallic waveguide for creating the arbitrary elliptically polarized microwave beam needed for electron cyclotron resonance heating of plasma. Using a vector network analyzer to generate a linearly polarized HE11 incident mode, each polarizer was individually tested to measure the rotation α and ellipticity β of the elliptically polarized reflected microwave beam as a function of the grating rotation angle. The grating polarizers were then tested together to measure the elliptical polarization as a function of the angles of the combination of the two polarizers arranged sequentially on the transmission line. The map of the ellipticity versus grating angles agreed very well with numerical simulations using high-frequency structure simulator. Numerical simulations show that up to eight combinations of rotation angles of the two grating polarizers can provide the same ellipticity but with the varying ohmic loss, thus allowing the choice of settings to minimize the ohmic loss, a necessary consideration to minimize heating effects in megawatt power level systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

Automated Unstructured Grid Adaptation on a Strut Fuel Injector at Hypervelocity Flow Conditions

Computational fluid dynamics (CFD) analysis is presented with the use of an automated unstructured grid adaptation tool on a strut fuel injector at hypervelocity flow conditions. The analysis was carried out with the VULCAN-CFD solver using Reynolds-averaged simulations (RAS). The hypervelocity flow conditions match the high Mach number flow of the experiments conducted as part of the Enhanced Injection and Mixing Project (EIMP) at the NASA Langley Research Center (LaRC). The current work utilizes an automated grid adaptation tool recently implemented into VULCAN-CFD, and explores this tool’s ability to solve high-speed mixing problems. Simulation results obtained using the unstructured adaptive grid approach are compared to those on a user generated structured grid. These results are evaluated by analyzing how efficiently comparable fidelity results are obtained from both adapted and structured simulations. In addition, two adaptation strategies were used to explore the impact on the final solution. In the current work, the unstructured grid adaptation tool automatically generates unstructured grids and performs adaptation of the grid based on a Hessian error estimate of a specified flow field parameter. Multiple adaptations were executed using each run strategy with the one-dimensional values of the mixing efficiency used to determine grid convergence and for comparison with the structured grid simulation results. It was found that the unstructured adaptive grid simulations were able to produce results that matched closely with those on structured grids using far fewer grid cells, and thus, requiring far less computational time to reach the solution. It was also discovered that the adaptation run strategy influenced the total number of grid cells and the efficiency with which a final grid-adapted solution was reached. Overall, the investigation demonstrated that the automated unstructured grid adaptation tool implemented in VULCAN-CFD is capable of accurately and efficiently solving complex highspeed mixing problems using only a fraction of the grid cells required to obtain comparable results using a user-generated structured grid.

grid adaptation↗
DOE OSTI2019

Introduction of a bounded penalty function in contact‐assisted simulations of protein structures to omit false restraints

Contact‐assisted simulations, the contacts being predicted or determined experimentally, have become very important in the determination of the structures of proteins and other biological macromolecules. In this work, the effect of contact‐distance restraints on the simulated structures was investigated with the use of multiplexed replica exchange simulations with the coarse‐grained UNRES force field. A modified bounded flat‐bottom restraint function that does not generate a gradient when a restraint cannot be satisfied was implemented. Calculations were run with (i) a set of four small proteins, with contact restraints derived from experimental structures, and (ii) selected CASP11 and CASP12 targets, with restraints as used at prediction time. The bounded penalty function largely omitted false contacts, which were usually inconsistent. It was found that at least 20% of correct contacts must be present in the restraint set to improve model quality with respect to unrestrained simulations. © 2019 Wiley Periodicals, Inc.

Lubecka, Emilia A.↗
DOE OSTI2026

Efficient derivative computation for unsteady fatigue-constrained nonlinear aero-structural wind turbine blade optimization

Gradient-based optimization offers significant efficiency advantages for wind turbine blade design, but its application has often been limited by the cost and accuracy of finite-difference derivative calculations, especially when fatigue constraints are considered. In this work, we systematically compare and evaluate four differentiation techniques, namely algorithmic differentiation, implicit differentiation, sparsity exploitation, and parallelization, to determine their effectiveness in computing accurate gradients through time-domain aero-structural simulations. By integrating these techniques with unsteady nonlinear aerodynamic and structural models, we develop software designed for accurate gradient computation. We show that combining these techniques addresses memory and runtime challenges associated with long simulations required by design load cases. Specifically, the most effective combination reduces derivative computation wall time by over an order of magnitude compared to finite differencing while maintaining superior accuracy. We demonstrate this approach in a proof-of-concept aero-structural optimization of a wind turbine blade that improves the cost of energy by 12.78 %. This comparative study establishes a viable approach for fatigue-aware blade design that balances computational efficiency with modeling accuracy.

17 WIND ENERGY↗
NASA NTRSDate not supplied

Simulation of Deployable Composite Structures Based On Mechanics of Structure Genome

In this paper, a simulation method for analyzing deployable composite structures is presented. With a proper material model, effective plate/shell properties of the composites is obtained based on Mechanics of Structure Genome (MSG), and then implemented into a user subroutine UGENS for global structure simulation in ABAQUS. Column bending test (CBT) and composite boom and hub structure are studied for demonstration. A viscoelastic material model with direct integration implementation is adopted in this paper. CBT simulation shows good agreement with experiments during relaxation, while errors are observed when comparing residual deformation. This simulation can be potentially used as a calibration tool for material properties. After CBT simulation, a demonstrative model with a lenticular boom and the hub is created in ABAQUS. Complete process of flattening, coiling, stowage, deploying and recovery is simulated with the viscoelastic material model. Residual deformation of the boom is analyzed.

Multi-scale modeling↗
NASA NTRS2003

Multidisciplinary Analysis of a Hypersonic Engine

The objective is to develop high fidelity tools that can influence ISTAR design In particular, tools for coupling Fluid-Thermal-Structural simulations RBCC/TBCC designers carefully balance aerodynamic, thermal, weight, & structural considerations; consistent multidisciplinary solutions reveal details (at modest cost) At Scram mode design point, simulations give details of inlet & combustor performance, thermal loads, structural deflections.

Suresh, Ambady↗
NASA NTRSDate not supplied

Multiscale Simulation of Deployable Composite Structures

In this paper, a multiscale simulation method for analyzing deployable composite structures is presented. Effective shell properties of the composites are obtained based on Mechanics of Structure Genome (MSG) homogenization, and then implemented into a user-subroutine UGENS for structural simulation with shell elements in Abaqus. The column bending test(CBT) of a flat thin flexure and lenticular composite boom in a simplified deployer structure are studied for demonstration. A viscoelastic material model with direct integration is adopted in this paper. The CBT simulation shows good agreement with experiments during relaxation, while errors are observed when comparing residual deformation. It is shown that this CBT model can be calibrated to CBT test results. For the lenticular boom analysis, the complete process of flattening, coiling, stowage, deployment and recovery is simulated with the viscoelastic shell model.

Finite element analysis↗
NASA NTRS1993

Magnetotail structures in a simulated Earth's magnetosphere

The structure of the magnetotail is investigated in a laboratory simulated magnetosphere. Particular emphasis is placed on the region of distant magnetotail where the closed field line region of the plasma sheet terminates and the process of reconnection takes place. Our study builds upon the previous investigation of the magnetotail where the main results were based on the magnetic field measurements in the tail region of the simulated magnetosphere. In this paper, more elaborate measurements of plasma flow and electric field are presented. Besides these measurements, this region of distant magnetotail is also explored by high resolution imaging with a gated optical imager (GOI) and by digital image analysis. These images clearly reveal a Y-type magnetic neutral line for the northward 'interplanetary' field (IMF) and a usual X-type for the southward IMF that confirms our previous results deduced from the magnetic field measurements. In the neighborhood of these neutral points a strong component of dawn to dusk electric field (E(sub y)) and a counterstreaming plasma flow is also observed. Plasma flow is measured by using a double sided Faraday cup which is also used to measure the y-component of tail current (J(sub y)) at different locations. These measurements reveal that the tail current is not carried by ions as previously thought, rather it is carried by electrons alone.

Yur, G.↗
NASA NTRS2010

Calculation of Dose Deposition in Nanovolumes and Simulation of gamma-H2AX Experiments

Monte-Carlo track structure simulations can accurately simulate experimental data: a) Frequency of target hits. b) Dose per event. c) Dose per ion. d) Radial dose. The dose is uniform in micrometers sized voxels; at the nanometer scale, the difference in energy deposition between high and low-LET radiations appears. The calculated 3D distribution of dose voxels, combined with chromosomes simulated by random walk is very similar to the distribution of DSB observed with gamma-H2AX experiments. This is further evidenced by applying a visualization threshold on dose.

Plante, Ianik↗
DOE OSTI2024

Density Functional Tight-Binding Models for Band Structures of Transition-Metal Alloys and Surfaces across the d -Block

First-principles electronic structure simulations are an invaluable tool for understanding chemical bonding and reactions. While machine-learning models such as interatomic potentials significantly accelerate the exploration of potential energy surfaces, electronic structure information is generally lost. Particularly in the field of heterogeneous catalysis, simulated electron band structures provide fundamental insights into catalytic reactivity. This ab initio knowledge is preserved in semiempirical methods such as density functional tight binding (DFTB), which extend the accessible computational length and time scales beyond first-principles approaches. In this paper here we present Shell-Optimized Atomic Confinement (SOAC) DFTB electronic-part-only parametrizations for bulk and surface band structures of all d-block transition metals that enable efficient predictions of electronic descriptors for large structures or high-throughput studies on complex systems outside the computational reach of density functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1989

Simulation of flexible structures with impact: Experimental validation

The simulation of the dynamic behavior of flexible structures with impact, is experimentally and numerically investigated. A radially rotating flexible beam attached to a rigid shaft is considered. Both experimental and numerical studies are undertaken. Experimental studies how excellent agreement with simulation studies using both the momentum balance (coefficient of friction), and spring-dashpot (impact pair) models. The simulation studies are even capable of predicting the high-speed multiple impacts which occur due to structural flexibility and which are experimentally observed using high-speed video photography. The results of the studies show that a simple momentum balance (coefficient of restitution) method for simulating the impact is sufficiently accurate in predicting the dynamic behavior of the system for most engineering applications. The momentum balance method cannot simulate the impact force which develops during the contact duration, but is computationally very efficient. The spring-dashpot model is more difficult to develop and requires significantly larger computation time, but can simulate impact forces and stresses due to impact. The momentum balance (coefficient of restitution) method, although strictly not applicable to flexible bodies, has been shown to provide an accurate and computationally efficient method for simulating the dynamic behavior of flexible structures with impact when contact stresses are not needed.

Ulsoy, A. Galip↗
DOE OSTI2025

Mechanically and electrically tunable Rashba-Edelstein effect in ferroelectric semiconductors, CsGe⁢𝑋 3 (𝑋 = I, Br, Cl)

The ability of materials to convert charge current into spin current is fundamental to many spintronics applications. One means of realizing this conversion is via Rashba-Edelstein effect (REE). Using density functional theory simulations, we predict that REE can be induced in the recently discovered family of semiconducting ferroelectrics, CsGe⁢𝑋 3 (𝑋 = I, Br, Cl). The effect is quantified through Rashba-Edelstein coefficients, 𝜒 𝑥⁢𝑦 =−𝜒 𝑦⁢𝑥 , which are nonzero in valence and conduction bands. The largest values, obtained for CsGeI 3 , are 3.45 × 10 10 $\frac{ℏ}{Λ cm}$ and 0.97 × 10 10 $\frac{ℏ}{Λ cm}$ in the conduction and valence bands, respectively. The values are comparable to, and sometimes exceed, those of other inorganic materials, although the maximal values occur away from the band edges. The coefficients' sign couples to the direction of spontaneous polarization, offering opportunities for nonvolatile spin current manipulation via external electric field. Furthermore, these coefficients are highly tunable through strain engineering owing to strain-induced variations in spin textures and energy isosurfaces. Specifically, 𝜒 in the valence band of CsGeI 3 is enhanced to 3.61 × 10 10 $\frac{ℏ}{Λ cm}$ under 5% biaxial strain. Given this potential, we synthesized CsGeI 3 to validate our simulation structure and found excellent agreement between experiment and simulation, thereby allowing extrapolation of our findings to practically significant temperatures. Furthermore, our study identifies promising materials for nonvolatile, multifunctional spintronic applications.

Electronic structure↗
DOE OSTI2022

Surface Wave Based Non-conductor-contact Reflectometry Method for Insulation and Jacket Damage Detection in Multi-Conductor Cables

This paper presents a non-conductor-contact surface wave reflectometry technique to locate insulation and jacket damage on multi-conductor cables at a distant location from the sensor. Simulation studies were conducted using Ansys high frequency structure simulator (HFSS). A GHz range surface wave launcher was employed such that maximum surface wave energies were confined in the insulation layer while minimizing attenuation. The wave launcher can potentially be mounted on the outer surface of live cables or cable conduits and requires no physical connection to the conductors. Multiple simulations involving a 4 GHz wave launcher and a three-conductor cable with an 8 mm outer diameter were carried out demonstrating the efficacy of the proposed method. Water leak and different types of insulation/jacket damage were simulated and detected.

reflectometry, multi-conductor cable, frequency do↗
DOE OSTI2022

Effect of Semiconducting Layer on Cable Insulation Damage Detection Using Surface Wave Reflectometry

This paper presents a study of the effect of the semiconducting layer present in medium and high voltage cables on surface wave propagation and its feasibility in detecting insulation damage on cables. Simulation studies were conducted using Ansys High Frequency Structure Simulator (HFSS). It was observed that attenuation increased with thicker semiconducting layer and higher conductivity of the layer. For instance, on a 24.4 mm diameter power cable, the electric field strength associated with a 1 GHz surface wave declines with distance and fades away after 30 m when a 2 mm thick semiconducting layer is present. More results as a function of semiconducting layer thickness, material conductivity and permittivity, distance of a damaged section, etc. will be presented.

reflectometry, unshielded power cable, semiconduct↗