Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subsurface Simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Validation of an In-Water, Tower-Shading Correction Scheme

Large offshore structures used for the deployment of optical instruments can significantly perturb the intensity of the light field surrounding the optical measurement point, where different portions of the visible spectrum are subject to different shadowing effects. These effects degrade the quality of the acquired optical data and can reduce the accuracy of several derived quantities, such as those obtained by applying bio-optical algorithms directly to the shadow-perturbed data. As a result, optical remote sensing calibration and validation studies can be impaired if shadowing artifacts are not fully accounted for. In this work, the general in-water shadowing problem is examined for a particular case study. Backward Monte Carlo (MC) radiative transfer computations- performed in a vertically stratified, horizontally inhomogeneous, and realistic ocean-atmosphere system are shown to accurately simulate the shadow-induced relative percent errors affecting the radiance and irradiance data profiles acquired close to an oceanographic tower. Multiparameter optical data processing has provided adequate representation of experimental uncertainties allowing consistent comparison with simulations. The more detailed simulations at the subsurface depth appear to be essentially equivalent to those obtained assuming a simplified ocean-atmosphere system, except in highly stratified waters. MC computations performed in the simplified system can be assumed, therefore, to accurately simulate the optical measurements conducted under more complex sampling conditions (i.e., within waters presenting moderate stratification at most). A previously reported correction scheme, based on the simplified MC simulations, and developed for subsurface shadow-removal processing of in-water optical data taken close to the investigated oceanographic tower, is then validated adequately under most experimental conditions. It appears feasible to generalize the present tower-specific approach to solve other optical sensor shadowing problems pertaining to differently shaped deployment platforms, and also including surrounding structures and instrument casings.

Hooker, Stanford B.↗

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗

Enhanced Remedial Amendment Delivery through Fluid Viscosity Modifications: Experiments and numerical simulations

Abstract Heterogeneity is often encountered in subsurface contamination characterization and remediation. Low-permeability zones are typically bypassed when remedial fluids are injected into subsurface heterogeneous aquifer systems. Therefore, contaminants in the bypassed areas may not be contacted by the amendments in the remedial fluid, which may significantly prolong the remediation operations. Laboratory experiments and numerical studies have been conducted to develop the Mobility-Controlled Flood (MCF) technology for subsurface remediation and to demonstrate the capability of this technology in enhancing the remedial amendments delivery to the lower permeability zones in heterogeneous systems. Xanthan gum, a bio-polymer, was used to modify the viscosity of the amendment-containing remedial solutions. Sodium mono-phosphate and surfactant were the remedial amendment used in this work. The enhanced delivery of the amendments was demonstrated in two-dimensional (2-D) flow cell experiments, packed with heterogeneous systems. The impact of polymer concentration, fluid injection rate, and permeability contract in the heterogeneous systems has been studied. The Subsurface Transport over Multiple Phases (STOMP) simulator was modified to include polymer-induced shear thinning effects. Shear rates of polymer solutions were computed from pore-water velocities using a relationship proposed in the literature. Viscosity data were subsequently obtained from empirical viscosity-shear rate relationships derived from laboratory data. The experimental and simulation results clearly show that the MCF technology is capable of enhancing the delivery of remedial amendments to subsurface lower permeability zones. The enhanced delivery significantly improved the NAPL removal from these zones and the sweeping efficiency on a heterogeneous system was remarkably increased when a polymer fluid was applied. MCF technology is also able to stabilize the fluid displacing front when there is a density difference between the fluids. The modified STOMP simulator was able to predict the experimental observed fluid displacing behavior. The simulator may be used to predict the subsurface remediation performance when a shear thinning fluid is used to remediate a heterogeneous system.

54 ENVIRONMENTAL SCIENCES↗

Mesh infrastructure for coupled multiprocess geophysical simulations

We have developed a sophisticated mesh infrastructure capability to support large scale multiphysics simulations such as subsurface flow and reactive contaminant transport at storage sites as well as the analysis of the effects of a warming climate on the terrestrial arctic. These simulations involve a wide range of coupled processes including overland flow, subsurface flow, freezing and thawing of ice rich soil, accumulation, redistribution and melting of snow, biogeochemical processes involving plant matter and finally, microtopography evolution due to melting and degradation of ice wedges below the surface. In addition to supporting the usual topological and geometric queries about the mesh, the mesh infrastructure adds capabilities such as identifying columnar structures in the mesh, enabling deforming of the mesh subject to constraints and enabling the simultaneous use of meshes of different dimensionality for subsurface and surface processes. The generic mesh interface is capable of using three different open source mesh frameworks (MSTK, MOAB and STKmesh) under the hood allowing the developers to directly compare them and choose one that is best suited for the application's needs. We demonstrate the results of some simulations using these capabilities as well as present a comparison of the performance of the different mesh frameworks.

58 GEOSCIENCES↗

Model Data Archive for Manuscript Titled "Evaluation of a Coupled Surface–Subsurface Hydrologic Model Using Dense Water‑Level Sensors in a Mixed Urban–Rural Watershed"

This archive provides scripts, input files, and datasets used for the implementation and evaluation of a fully coupled surface–subsurface hydrologic model in the Neches River Basin, southeast Texas. The study uses the Advanced Terrestrial Simulator (ATS) to simulate coupled surface–subsurface hydrologic processes over a mixed urban–rural watershed and evaluates model performance using a dense network of 136 in situ water-level sensors, nine U.S. Geological Survey (USGS) stream gauges, and SSEBop-derived evapotranspiration estimates during the period October 2014–June 2024. The workflow is implemented primarily in Python 3 using the Watershed Workflow package. The Jupyter notebooks can be executed using open-source software such as Anaconda JupyterLab or Visual Studio Code. Other data files include TXT, CSV, XML, SHP, TIF, NetCDF, HDF5, and ExodusII files, which can be processed using the provided Python scripts. ATS input files are provided in XML format and can be edited using any commonly used text editor. This archive contains: *Scripts and input files used to generate the ATS model setup, including watershed discretization, mesh generation, parameter mapping, and model configuration. *Jupyter notebooks used for preprocessing observational data, evaluating streamflow, water levels, and evapotranspiration, computing performance metrics, and generating the figures presented in the manuscript. *ATS simulation outputs and processed observational datasets, including OneRain and DD6 water-level sensors, USGS streamflow observations, GIS data, and supporting spatial datasets used throughout the study.

Dense water-level sensor network↗

Coupling subsurface and above-surface models for optimizing the design of borefields and district heating and cooling systems in the presence of varying water-table depth. In: Proceedings, 46th Workshop on Geothermal Reservoir Engineering

Dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange. Current modeling approaches in building and district energy simulation tools typically consider heat conduction through the ground between boreholes, without flow of groundwater. On the other hand, detailed simulation tools for subsurface heat and mass transfer exist, but these fall short in simulating above-surface energy systems. To support the design and operation of such systems, we have developed a coupled model including a software package for building and district energy simulation, and software for detailed heat and mass transfer in the ground. For the first, we use the open-source Modelica Buildings Library, which includes dynamic simulation models for building and district energy and control systems. For the heat and mass transfer in the soil, we use the TOUGH simulator. TOUGH can model heat and multi-phase, multi-component mass transport for a variety of fluid systems, as well as chemical reactions, in fractured porous media. In previous work, we described the coupling of these software packages, including how time-dependent boundary conditions for the borehole walls are synchronized for use in Modelica and TOUGH. We verified that the coupled Modelica/TOUGH code produced consistent results with the original Modelica code for an idealized problem in which heat transfer was purely by conduction in a uniform geologic medium. Here, we examine less idealized problems for which TOUGH’s advanced capabilities for modeling fluid flow are required. The first problem has a shallow vadose zone, and the second problem has a thicker vadose zone with a water-table depth that varies in time, which requires a fine vertical grid discretization for the TOUGH model.

Doughtry, Christine↗

Hourly temperature and surface water level at the Ikpikpuk delta from 5/2012 to 11/2012

This data package includes the soil temperature and surface water level observations in 2012 at the Ikpikpuk River delta in northern Alaska. The data file consists of the observation table with both the .xlsx and .csv file formats. The files can be accessed through several software tools, like Microsoft Excel, and text editors. This is raw data from the near-surface ground temperature sensors at 15 cm (active layer) and 100 cm (permafrost) soil depth and a surface water sensor at the Ikpikpuk delta site in Alaska, US. The Ikpikpuk River delta is located on the Arctic Coastal Plain of northern Alaska. The Ikpikpuk River drains a land area of 15,330 km2, emptying into Smith Bay, and the delta is fan-shaped with an aerial extent of 106 km2 (Fuchs et al., 2018). This dataset supports the publication entitled "The thermal response of permafrost to coastal floodplain flooding" submitted to Environmental Research Letters (under review), where the observed water level is used as the upper boundary condition for the model simulations and the observed subsurface temperature is compared with the model simulations to answer the question about how coastal flooding affects permafrost thaw.

54 ENVIRONMENTAL SCIENCES↗

Data-model files associated with the manuscript "The Effects of Spatial and Temporal Resolution of Gridded Meteorological Forcing on Watershed Hydrological Responses" (Shuai et al., 2022 HESS)

This data package contains the model inputs and outputs used in "The Effects of Spatial and Temporal Resolution of Gridded Meteorological Forcing on Watershed Hydrological Responses" (Shuai et al., 2022 HESS). The data.zip file contains the data used to drive the model simulations. The model.zip file contains the XML input file for ATS. The notebook.zip file contains the Jupyter notebooks for pre- and post- processing model results. The figures.zip file contains the raw figures associated with the manuscript.Meteorological forcing plays a critical role in accurately simulating the watershed hydrological cycle. With the advancement of high-performance computing and the development of integrated watershed models, simulating the watershed hydrological cycle at high temporal (hourly to daily) and spatial resolution (10s of meters) has become efficient and computationally affordable. These hyperresolution watershed models require high resolution of meteorological forcing as model input to ensure the fidelity and accuracy of simulated responses. In this study, we utilized the Advanced Terrestrial Simulator (ATS), an integrated watershed model, to simulate surface and subsurface flow and land surface processes using unstructured meshes at the Coal Creek Watershed near Crested Butte (Colorado). We compared simulated watershed hydrologic responses including streamflow, and distributed variables such as evapotranspiration, snow water equivalent (SWE), and groundwater table driven by three publicly available, gridded meteorological forcings (GMFs) -- Daily Surface Weather and Climatological Summaries (Daymet), Parameter-elevation Regressions on Independent Slopes Model (PRISM), and North American Land Data Assimilation System (NLDAS). By comparing various spatial resolutions (ranging from 400 m to 4 km) of PRISM, the simulated streamflow only becomes marginally worse when spatial resolution of meteorological forcing is coarsened to 4 km (or 30% of the watershed area). However, the 4 km resolution has much worse performance than finer resolution in spatially distributed variables such as SWE. Using temporally disaggregated PRISM, we compared models forced by different temporal resolutions (hourly to daily), sub-daily resolution preserves the dynamic watershed responses (e.g., diurnal fluctuation of streamflow) that are absent in results forced by daily resolution. Conversely, the simulated streamflow shows better performance using daily resolution compared to that using sub-daily resolution. Our findings suggest that the choice of GMF and its spatiotemporal resolution depends on the quantity of interest and its spatial and temporal scale, which may have important implications on model calibration and watershed management decisions.

54 ENVIRONMENTAL SCIENCES↗

The effects of spatial and temporal resolution of gridded meteorological forcing on watershed hydrological responses

Abstract. Meteorological forcing plays a critical role in accurately simulating the watershed hydrological cycle. With the advancement of high-performance computing and the development of integrated watershed models, simulating the watershed hydrological cycle at high temporal (hourly to daily) and spatial resolution (tens of meters) has become efficient and computationally affordable. These hyperresolution watershed models require high resolution of meteorological forcing as model input to ensure the fidelity and accuracy of simulated responses. In this study, we utilized the Advanced Terrestrial Simulator (ATS), an integrated watershed model, to simulate surface and subsurface flow and land surface processes using unstructured meshes at the Coal Creek Watershed near Crested Butte (Colorado). We compared simulated watershed hydrologic responses including streamflow and distributed variables such as evapotranspiration, snow water equivalent (SWE), and groundwater table driven by three publicly available, gridded meteorological forcings (GMFs) – Daily Surface Weather and Climatological Summaries (Daymet), the Parameter-elevation Regressions on Independent Slopes Model (PRISM), and the North American Land Data Assimilation System (NLDAS). By comparing various spatial resolutions (ranging from 400 m to 4 km) of PRISM, the simulated streamflow only becomes marginally worse when spatial resolution of meteorological forcing is coarsened to 4 km (or 30 % of the watershed area). However, the 4 km-resolution has much worse performance than finer resolution in spatially distributed variables such as SWE. Using the temporally disaggregated PRISM, we compared models forced by different temporal resolutions (hourly to daily), and sub-daily resolution preserves the dynamic watershed responses (e.g., diurnal fluctuation of streamflow) that are absent in results forced by daily resolution. Conversely, the simulated streamflow shows better performance using daily resolution compared to that using sub-daily resolution. Our findings suggest that the choice of GMF and its spatiotemporal resolution depends on the quantity of interest and its spatial and temporal scale, which may have important implications for model calibration and watershed management decisions.

54 ENVIRONMENTAL SCIENCES↗

2D reactive transport model of shale chemical weathering and biogeochemical fluxes along a mountainous hillslope, East River Watershed, Colorado: Input files and simulation results

This data package contains input files and simulation results for a two-dimensional (2D) reactive transport model used to quantitatively analyze the coupled hydrological and biogeochemical processes governing shale weathering and associated biogeochemical fluxes under realistic environmental conditions in the high-elevation East River Watershed. These data support the conclusions presented in Stolze et al. (Water Resources Research, under review), "Model-based interpretation of solute exports and carbon partitioning during shale weathering in a mountainous hillslope". The model simulates atmospheric-subsurface gas exchange, subsurface water flow, and shale weathering processes under dynamic, year-scale conditions along a shale-underlain hillslope located in the East River watershed. The simulations were performed using the PFLOTRAN flow and reactive transport code and executed on the Perlmutter supercomputer to leverage its large-scale parallel computing capabilities. The data package contains two zipped folders, "model_input_files" and "simulation_results", and one readme.txt file. "model_input_files" contains the necessary input files to run the calibrated base-base model presented in Stolze et al. (Water Resources Research, under review). "simulation_results" contains a single hdf5 file ("Output_2D_hillslope_model.h5") which includes the results of simulation performed using the base-case model. This file can be opened with HDFView 3.1.4, Python, or MATLAB. "readme.txt" contains relevant information about the base-case model and provides guidelines on how to run the associated input files provided in the folder "model_input_files". Furthermore, readme.txt provides information regarding the model results provided in "Output_2D_hillslope_model.h5" such as matrix dimensionality and output units. Field datasets used to evaluate model performance were collected at three monitoring wells located along a hillslope transect (PLM1, PLM2, and PLM3). Dissolved ion concentration data were collected from November 2016 to October 2021 for Ca, Mg, DIC, Na, K, SO4 (Dong et al., 2025 - dic_npoc_data_2014_2024.zip - DOI:10.15485/1660459; Williams et al., 2025 - anion_data_2014_2024.zip - DOI:10.15485/1668054; Dong et al., 2025 - cation_data_2014_2024.zip - DOI:10.15485/1668055). Note that we used the files named er_PLM1_xx_yy, er_PLM2_xx_yy, and er_PLM3_xx_yy where xx stands for the name of the aqueous species and yy stands for the depth where the measurements were performed. Soil water content ([0 - 1] m) and water table depth were collected from November 2016 to October 2021 (Wan et al., 2024 - Dynamic_water_table__depthsFig2b.csv and Soil_water_content_Fig4e.csv - DOI:10.15485/2322567). Gaseous CO2 concentration were collected from October 2020 to December 2021(Wan et al., 2024 - Soil_CO2_concentrations_Fig4h.csv - DOI:10.15485/2322567) Gaseous CO2 flux from the subsurface to the atmosphere were collected in the vicinity of PLM2 from October 2019 to May 2022 (Wu et al., 2025). Soil microbial biomass concentration was measured from August 2016 to June 2017 (Sorensen et al., 2019 - 2017_East_River_Pumphouse_Microbial_Biomass__1_.csv - DOI:10.15485/1577267) All field data are published as CSV files compatible with Microsoft Excel, MATLAB, and Python, or as text files. The coordinates of the monitoring wells and the CO2(g) flux sensor in the coordinate system WGS84 are: -PLM1: [38.9197710 ; -106.9492750] -PLM2: [38.9201580 ; -106.9487170] -PLM3: [38.9207843 ; -106.9483668] -PLM4: 38.9210060 ; -106.9479528] -CO2(g) flux sensor: [38.9199180 ; -106.9489906] ------------------------------------------------------------------------------------------- This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. This research used resources of the National Energy Research Scientific Computing Center (NERSC), a Department of Energy User Facility using NERSC award BER-ERCAP 23980, BER-ERCAP 28550, and BER-ERCAP 33789.

54 ENVIRONMENTAL SCIENCES↗

Quartz Dissolution Effects on Flow Channelization and Transport Behavior in Three‐Dimensional Fracture Networks

We perform a set of reactive transport simulations in three-dimensional fracture networks to characterize the impact of geochemical reactions on flow channelization. Flow channelization, a frequently observed phenomenon in porous and fractured subsurface rock formations, results from the spatially variable hydraulic resistance offered by a geological structure. In addition to geo-structural features such as network connectivity, geometry, and hydraulic resistance, geochemical reactions, for example, dissolution and precipitation, can dynamically inhibit or enhance flow channelization. These geochemical processes can change the fracture permeability leading to increased flow channelization, which are localized connected regions of high volumetric flow rates that are seemingly ubiquitous in the subsurface. In our simulations, fractures partially filled with quartz are gradually dissolved until quasi-steady state conditions are obtained. We compare the flow field's initial unreacted and final dissolved states in terms of flow and transport observations. We observe that the dissolved fracture networks provide less resistance to flow and exhibit increased flow channelization when compared to their unreacted counterparts. However, there is substantial variability in the magnitude of these changes which implies that the channelization strongly depends on the network structure. In turn, we identify the interplay between the particular network structure and the impact of geochemical dissolution on flow channelization. The presented results indicate that geological systems that have been weathering or reactive for longer times in older landscapes are likely to have increased flow channelization compared to their equivalent but younger counterparts, which implies a time dependence on flow channelization in fractured media.

Hyman, Jeffrey D.↗

Solving Coupled Surface and Subsurface Flow with Multirate Time Integration [Slides]

This report details an end of summer internship. The report lists the objective, "Add more multirate time integration methods to Amanzi" and concludes that, "Multirate methods can be used to speed up simulations and to get higher orders of accuracy", and "Coupled surface and subsurface simulations could benefit from using multirate schemes".

47 OTHER INSTRUMENTATION↗

Subsurface Spectroscopy of Thermal Degradation Inside an Inert Plastic Bonded Explosive (PBX) Simulant Using Feedback-Assisted Wavefront Shaping

We characterize the subsurface thermal degradation of an inert analog of high-explosive molecular crystals (Eu:Y(acac) 3 (DPEPO)) (EYAD) embedded inside of a plastic bonded explosive simulant using feedback-assisted wavefront shaping-based fluorescence and Raman spectroscopies. This technique utilizes wavefront shaping to focus pump light inside a heterogeneous material onto a target particle, which significantly improves its spectroscopic signature. We find that embedding the EYAD crystals in the heterogeneous polymer results in improved thermal stability, relative to bare crystal measurements, with the crystal remaining fluorescent to >612 K inside of the heterogeneous material, while the bare crystal’s fluorescence is fully quenched by 500 K. We hypothesize that this improvement is due to the polymer restricting the effects of EYAD melting, which occurs at 400 K and is the primary mechanism for spectroscopic changes in the temperature range explored.

Anderson, Benjamin R.↗

Mars Analog Research and Technology Experiment (MARTE): A Simulated Mars Drilling Mission to Search for Subsurface Life at the Rio Tinto, Spain

The MARTE (Mars Astrobiology Research and Technology Experiment) project was selected by the new NASA ASTEP program, which supports field experiments having an equal emphasis on Astrobiology science and technology development relevant to future Astrobiology missions. MARTE will search for a hypothesized subsurface anaerobic chemoautotrophic biosphere in the region of the Tinto River in southwestern Spain while also demonstrating technology needed to search for a subsurface biosphere on Mars. The experiment is informed by the strategy for searching for life on Mars.

Stoker, Carol↗