Search NASA⌕ Search

SEARCH · Search NASA

Results for “Survival Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Commentary 2 to Cox and Little: radiation-induced oncogenic transformation: the interplay between dose, dose protraction, and radiation quality

There is now a substantial body of evidence for end points such as oncogenic transformation in vitro, and carcinogenesis and life shortening in vivo, suggesting that dose protraction leads to an increase in effectiveness relative to a single, acute exposure--at least for radiations of medium linear energy transfer (LET) such as neutrons. Table I contains a summary of the pertinent data from studies in which the effect is seen. [table: see text] This phenomenon has come to be known as the "inverse dose rate effect," because it is in marked contrast to the situation at low LET, where protraction in delivery of a dose of radiation, either by fractionation or low dose rate, results in a decreased biological effect; additionally, at medium and high LET, for radiobiological end points such as clonogenic survival, the biological effectiveness is independent of protraction. The quantity and quality of the published reports on the "inverse dose rate effect" leaves little doubt that the effect is real, but the available evidence indicates that the magnitude of the effect is due to a complex interplay between dose, dose rate, and radiation quality. Here, we first summarize the available data on the inverse dose rate effect and suggest that it follows a consistent pattern in regard to dose, dose rate, and radiation quality; second, we describe a model that predicts these features; and, finally, we describe the significance of the effect for radiation protection.

Review, Tutorial↗

Person to Person Biological Heat Bypass During EVA Emergencies

During EVA and other extreme environments, mutual human support is sometimes the last way to survive when there is a failure of the life support equipment. The possibility to transfer a coolant to remove heat or a warming fluid to increase heat from one individual to another to support the thermal balance of the individual with system failure was assessed. The following scenarios were considered: 1. one participant has a cooling system that is not working well and already has a body heat deficit equal to 100-120 kcal and a finger temperature decline to 25 C; 2. one participant has the same status of overcooling and the other mild overheating. Preliminary findings showed promise in using such sharing tactics to extend the time duration of survival in extreme situations when there is a high metabolic rate in the donor.

Koscheyev, Victor S.↗

Novel Environmental Barrier Coatings for the Protection of SiC Components

Greater gas turbine engine efficiency is a major goal in aeronautics research often pursued through increased engine operating temperatures. However, it is necessary to replace the current hot-stage alloy components with more thermally robust parts, such as Silicon-based ceramics and composites. Unfortunately, these materials are still susceptible to the effects of oxidation, water vapor, and (Calcium-Magnesium-Alumino-Silicate) CMAS interaction, among other issues at high temperature. To mitigate these effects, environmental barrier coating (EBC) materials are employed to help control the rate of degradation to the underlying composite, but must also survive the corrosive environment. The current study explores new design space in Mg-based EBC materials with respect to microstructure, high temperature phase stability, volatilization in water vapor, as well as structure-property relationships at high temperature.

Kowalski, Benjamin A.↗

Photoionization Models for High Density Gas

Relativistically broadened and redshifted 6.4 – 6.9 keV iron K lines are observed from many accretion powered objects, including X-ray binaries and active galactic nuclei(AGN). Existence of gas close to the central engine implies large radiation intensities and correspondingly large gas densities if the gas is to remain partially ionized. Simple estimates indicate that high gas densities are needed to allow survival of iron against ionization. These are high enough that rates for many atomic processes are affected by mechanisms related to interactions with nearby ions and electrons. Radiation intensities are high enough that stimulated processes can be important. Most models currently in use for interpreting relativistic lines use atomic rate coefficients designed for use at low densities and neglect stimulated processes. In our work so far we have presented atomic structure calculations with the goal of providing physically appropriate models at densities consistent with line-emitting gas near compact objects. In this paper we apply these rates to photoionization calculations, and produce ionization balance curves and X-ray emissivities and opacities which are appropriate for high densities and high radiation intensities. The final step in our program will be presented in a subsequent paper: Model atmosphere calculations which incorporate these rates into synthetic spectra.

T Kallman↗

Simulation-based Study of Single-Event Burnout in 4H-SiC High-Voltage Vertical Superjunction DMOSFET: Physical Failure Mechanism and Robustness vs. Performance Tradeoffs

We explore and elucidate physical failure mechanisms in a 4H-SiC, high voltage, superjunction (SJ) vertical DMOSFET from a single heavy ion strike using three-dimensional electro-thermal transient simulations. The single-event burnout (SEB) failure is thermal runaway from second breakdown, initiated by impact ionization and terminated with mesoplasma formation, at the center of the P-pillar/N+ substrate interface. We also demonstrate that the SEB performance of this SiC SJ DMOSFET is insensitive to the pillar width but sensitive to the strike location with ion strike at the P-pillar causing SEB at a lower blocking voltage than at the N-pillar. Compared to commercially available 1.2 kV blocking-rated non-SJ DMOSFETs, which have been demonstrated to survive SEB up to 525 V, the SJ DMOSFET increases SEB survival threshold voltage (VSEB) by a factor of 2.2, making it close to 1200 V, while the on-resistance is increased by only 11%. Using our recently developed figure of merit (FoM), which considers the trade-off between VSEB and on-state performance, we find that the SiC SJ DMOSFET achieves a FoM that is 14 times better, making it superior to conventional 1.2 kV SiC DMOSFETs for long-term radiation-tolerant operation in space applications.

Silicon Carbide↗

Evaporation Rates for Liquid Water and Ice Under Current Martian Conditions

A number of studies have been concerned with the evaporation rates under martian conditions in order to place limits on the possible survival time of both liquid water and ice exposed on the surface of Mars. Such studies also aid in assessing the efficacy of an overlying layer of dust or loose regolith material in providing a barrier to free evaporation and thus prolong the lifetime of water in locations where its availability to putative living organisms would be significant. A better quantitative understanding of the effects of phase changes of water in the near surface environment would also aid the evaluation of the possible role of water in the formation of currently observed features, such as gullies in cliff walls and relatively short-term changes in the albedo of small surface areas ('dark stains'). Laboratory measurements aimed at refinement of our knowledge of these values are described here. The establishment of accurate values for evaporation rates and their dependence on the physical conditions of temperature, pressure and energy input, is an important benchmark for the further investigation of the efficacy of barriers to free evaporation in providing a prolonged period of survival of the water, particularly as a liquid.

Sears, D. W. G.↗

Influence of antimisting polymer on aviation fuel breakup

Experiments have been performed to determine the influence of a moving airstream on jet and drop breakup of fuel containing small concentrations of antimisting polymers. This study was motivated by the needs to inhibit the ignition of fuel during a survivable aircraft crash landing. High speed motion pictures of initial deformation rates and instant pictures of initial deformation rates and instant pictures of the drop breakup suggest that the enormous resistance to the sudden deformation of fuel containing antimisting polymer is related to the development of high tensile viscosity, even though the shear viscosity is not markedly affected. Study of a pendant drop fiber was undertaken to determine this tensile viscosity of antimisting fuel as a function of temperature and of polymer concentration.

Sarohia, V.↗

The fate of accreted CNO elements in neutron star atmospheres - X-ray bursts and gamma-ray lines

The fate of incident C-12, N-14, and O-16 in accreting neutron star atmospheres is described. When the accreting material is stopped by Coulomb collisions with atmospheric electrons, all incoming elements heavier than helium thermalize at higher altitudes in the atmosphere than the accreting protons. The incoming protons and helium then destroy the elements via nuclear spallation reactions. A small fraction of the nuclear reactions cause nuclear excitation and subsequent gamma-ray emission. The probability for a nucleus to survive this bombardment depends on how long it spends in the hazardous region of the atmosphere. The fractions of incident C-12, N-14, and O-16 that survive proton bombardment are calculated as a function of the accretion rate, and the mass and radius of the neutron star. The subsequent paucity of CNO nuclei decreases hydrogen-burning rates in the deep regions of the atmosphere, thereby reducing the amount of helium available for the unstable nuclear flashes that cause type I X-ray bursts. The gamma-ray line emission from this collisional deceleration scenario is determined.

Bildstein, Lars↗

Degree of Weathering of H-Chondrites from Frontier Mountain, Antarctica

One of the factors that determines the survival time of meteorites on the Earth's surface is the rate of weathering. For meteorites from hot deserts, a clear correlation is found between the degree of weathering and the terrestrial age, but for Antarctic meteorites this correlation is weak or even lacking. The lack of a clear correlation can partly be attributed to the two-stage history of many Antarctic meteorites, which spend part of their terrestrial residence time in the ice before they are exposed on the ice. Recently, it was found that for Lewis Cliff (LEW) meteorites local conditions on the ice play an important role in the weathering process. This work focuses on weathering effects in ordinary chondrites from Frontier Mountain (FRO), North Victoria Land. Although most FRO meteorites were classified as weathering category A or B, many are contaminated with terrestrial uranium, deposited from meltwater. This suggests that weathering plays a more significant role than the qualitative A-B-C weathering index indicates. We therefore determined the degree of weathering more quantitatively, by deriving the amount of oxidized metal from the concentrations of Fe and Ni in the nonmagnetic fraction of 23 H-chondrites and 1 L-chondrite. The results will be compared with those of LEW meteorites and will be discussed in terms of terrestrial age and location of find on the ice.

Welten, K. C.↗

Degree of Weathering of H-Chondrites From Frontier Mountain, Antarctica

One of the factors that determines the survival time of meteorites on the Earth's surface is the rate of weathering. For meteorites from hot deserts, a clear correlation is found between the degree of weathering, and the terrestrial age, but for Antarctic meteorites this correlation is weak or even lacking. The lack of a clear correlation can partly be attributed to the two-stage history of many Antarctic meteorites, which spend part of their terrestrial residence time in the ice before they are exposed on the ice. Recently, it was found that for Lewis Cliff (LEW) meteorites local conditions on the ice play an important role in the weathering process. This work focuses on weathering effects in ordinary chondrites from Frontier Mountain (FRO), North Victoria Land. Although most FRO meteorites were classified as weathering category A or B, many are contaminated with terrestrial uranium, deposited from meltwater. This suggests that weathering plays a more significant role than the qualitative A-B-C weathering index indicates. We therefore determined the degree of weathering more quantitatively, by deriving the amount of oxidized metal from the concentrations of Fe and Ni in the nonmagnetic fraction of 23 H-chondrites and 1 L-chondrite The results will be compared with those of LEW meteorites and will be discussed in terms of terrestrial age and location of find on the ice.

Welten, K. C.↗

Cell proliferation and differentiation in chemical leukemogenesis

In tissues such as bone marrow with normally high rates of cell division, proliferation is tightly coordinated with cell differentiation. Survival, proliferation and differentiation of early hematopoietic progenitor cells depend on the growth factors, interleukin 3 (IL-3) and/or granulocyte-macrophage colony stimulating factor (GM-CSF) and their synergism with other cytokines. We provide evidence that a characteristic shared by a diverse group of compounds with demonstrated leukemogenic potential is the ability to act synergistically with GM-CSF. This results in an increase in recruitment of a resting population of hematopoietic progenitor cells normally unresponsive to the cytokine and a twofold increase in the size of the proliferating cell population normally regarded to be at risk of transformation in leukemogenesis. These findings support the possibility that transient alterations in hematopoietic progenitor cell differentiation may be an important factor in the early stages of development of leukemia secondary to chemical or drug exposure.

Non-NASA Center↗

Midodrine as a Countermeasure to Orthostatic Hypotension Immediately After Space Shuttle Landing

Midodrine prevents post-space flight orthostatic intolerance when testing is conducted in a controlled laboratory setting within 2-4 hours after Space Shuttle landing. It is unknown if midodrine is as effective during re-entry and immediately following landing. METHODS: Cardiovascular responses to 10 minutes of 80 head-up tilt in five male astronauts were compared before and immediately after Space Shuttle missions. Preflight tests were conducted in the Johnson Space Center Cardiovascular Laboratory without midodrine. Post-flight testing was performed in the Crew Transport Vehicle on the Space Shuttle runway within 60 minutes of landing; midodrine was self-administered before re-entry. Survival analysis was performed (Gehan-Breslow test) to compare presyncope rates pre- to post-flight. Cardiovascular responses (last minute standing minus supine) to tilt before and after space flight were compared using paired t-tests. RESULTS: Midodrine did not prevent post-flight orthostatic hypotension in two of the five astronauts, but the rate of presyncope across the group did not increase (p=0.17) from pre- to post-flight. Also, although the change in heart rate from supine to the last minute of standing was not affected by space flight, systolic blood pressure decreased more (p=0.05) and diastolic blood pressure tended to decrease (p=0.08) after space flight. CONCLUSIONS: Accurate interpretation of the current results requires that similar data be collected in control subjects (without midodrine) on the CTV. However, drug interaction concerns with commonly used anti-emetics and potentiation of prolonged QTc intervals observed in long duration astronauts make the routine use of midodrine for immediate post-flight orthostatic hypotension unlikely. 2

Platts, Steven H.↗

Hybrid Thermal Control System for Extreme Thermal Environments

NASA’s return to the moon brings about many challenges, including issues with survival on the Lunar surface. Marshall Space Flight Center (MSFC) has been developing a hybrid thermal control system that can be utilized for various surface assets that must survive in extreme lunar environments. This scalable system is targeted for human-rated systems and utilizes a combination of a- pumped fluid loop (PFL) and a loop heat pipe (LHP) with thermal control valve (TCV). Pumped fluid loops have a long history of use in human rated systems. They can collect large amounts of waste heat and transport it over long distances in rovers, habitats, and other systems. By utilizing a non-toxic working fluid in the habitable volume, the PFL is easily serviceable by the crew and does not pose a risk during any unexpected leaks or failures. The addition of a LHP for the exterior heat transport and rejection adds several benefits to the system for extreme environment survival. The quantity of LHP scan be tailored to optimize heat rejection for different systems and allows for larger adiative surfaces. By utilizing a TCV in combination with the LHP, there can be high heat transfer during the daytime with minimal heat transfer during the night. The TCV passively controls the amount of heat transfer through the LHP based on the environmental temperature. A prototype system has been tested in bench top and thermal vacuum conditions. Results are presented showing the feasibility of the system concept.

Thermal Control↗

Hybrid Thermal Control System for Extreme Thermal Environments

NASA’s return to the moon brings about many challenges, including issues with survival on the Lunar surface. Marshall Space Flight Center (MSFC) has been developing a hybrid thermal control system that can be utilized for various surface assets that must survive in extreme lunar environments. This scalable system is targeted for human-rated systems and utilizes a combination of a- pumped fluid loop (PFL) and a loop heat pipe (LHP) with thermal control valve (TCV). Pumped fluid loops have a long history of use in human rated systems. They can collect large amounts of waste heat and transport it over long distances in rovers, habitats, and other systems. By utilizing a non-toxic working fluid in the habitable volume, the PFL is easily serviceable by the crew and does not pose a risk during any unexpected leaks or failures. The addition of a LHP for the exterior heat transport and rejection adds several benefits to the system for extreme environment survival. The quantity of LHP scan be tailored to optimize heat rejection for different systems and allows for larger adiative surfaces. By utilizing a TCV in combination with the LHP, there can be high heat transfer during the daytime with minimal heat transfer during the night. The TCV passively controls the amount of heat transfer through the LHP based on the environmental temperature. A prototype system has been tested in bench top and thermal vacuum conditions. Results are presented showing the feasibility of the system concept.

Thermal Control↗

Venus resurfacing rates: Constraints provided by 3-D Monte Carlo simulations

A 3-D Monte Carlo model that simulates the evolving surface of Venus under the influence of a flux of impacting objects and a variety of styles of volcanic resurfacing was implemented. For given rates of impact events and resurfacing, the model predicts the size-frequency and areal distributions of surviving impact craters as a function of time. The number of craters partially modified by volcanic events is also calculated as the surface evolves. It was found that a constant, global resurfacing rate of approximately 0.4 km(sup 3)/yr is required to explain the observed distributions of both the entire crater population, and the population of craters partially modified by volcanic processes.

Bullock, M. A.↗

Effects Of Dose Rates On Radiation Damage In CMOS Parts

Report describes measurements of effects of ionizing-radiation dose rate on consequent damage to complementary metal oxide/semiconductor (CMOS) electronic devices. Depending on irradiation time and degree of annealing, survivability of devices in outer space, or after explosion of nuclear weapons, enhanced. Annealing involving recovery beyond pre-irradiation conditions (rebound) detrimental. Damage more severe at lower dose rates.

Goben, Charles A.↗

Gap-Opening, Disk Clearing, and the Survival of the Regular Satellites of Jupiter and Saturn

It is only recently that the theory of disk-companion interactions yields migration rates due to the gas tidal torque that are in agreement with numerical simulations and up to an order of magnitude slower than previous estimates. Also, for a weakly turbulent disk, the gap size is controlled primarily by the damping length of acoustic waves launched by the secondary at Lindblad resonances, which in turn depends on whether the waves are 2D or 3D. At least for small azimuthal wavenumbers this damping length is of the order of the radial location of the Lindblad resonance. This may have important consequences for disk dispersal in satellite systems. In the case of Jupiter, it means that the inner Galilean satellites may have jointly opened a gap. On the other hand, in Saturn's system the satellites inside of Titan are probably too small to have opened gaps in the gas disk at the time of their formation; but the possibility exists that, by effectively clearing the gas disk inside its own orbit, Titan may have allowed smaller satellites to survive, depending on whether Titan can clear the disk in a timescale comparable to the migration rates due to gas drag and gas tidal torque for these objects.

Estrada, P. R.↗