Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIME SIGNAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Analysis of flutter in tape transport systems

Effect of flutter on digital data is recorded by magnetic tape recorders used with instrumentation systems. Major effect for both FM and direct recording techniques is shown to be a perturbation of the signal time base.

Davis, R. C.↗

Discriminant analyses of Bendix scanner data

Flights over Weslaco, Texas are discussed, using the 9-channel Bendix scanner, providing calibrated data in the 380 to 1000 nm wavelength interval. These flights were at 2000 ft. These data gave seasonal coverage from the time signals, representing mainly the soil background. The ground truth data are provided; signature processing studies relating scanner data to ground truth were also carried out.

Richardson, A. J.↗

RFI emitter location techniques

The possibility is discussed of using Doppler techniques for determining the location of ground based emitters causing radio frequency interference with low orbiting satellites. An error analysis indicates that it is possible to find the emitter location within an error range of 2 n.mi. The parameters which determine the required satellite receiver characteristic are discussed briefly along with the non-real time signal processing which may by used in obtaining the Doppler curve. Finally, the required characteristics of the satellite antenna are analyzed.

Rao, B. L. J.↗

Metabolic analyzer

An apparatus is described for the measurement of metabolic rate and breathing dynamics in which inhaled and exhaled breath are sensed by sealed, piston-displacement type spirometers. These spirometers electrically measure the volume of inhaled and exhaled breath. A mass spectrometer analyzes simultaneously for oxygen, carbon dioxide, nitrogen, and water vapor. Circuits responsive to the outputs of the spirometers, mass spectrometer, temperature, pressure, and timing signals compute oxygen consumption, carbon dioxide production, minute volume, and respiratory exchange ratio. A selective indicator provides for readout of these data at predetermined cyclic intervals.

Perry, C. L.↗

Metabolic analyzer

An apparatus is described for the measurement of metabolic rate and breathing dynamics in which inhaled and exhaled breath are sensed by sealed, piston-displacement type spirometers. These spirometers electrically measure the volume of inhaled and exhaled breath. A mass spectrometer analyzes simultaneously for oxygen, carbon dioxide, nitrogen and water vapor. Computation circuits are responsive to the outputs of the spirometers, mass spectrometer, temperature, pressure and timing signals and compute oxygen consumption, carbon dioxide production, minute volume and respiratory exchange ratio. A selective indicator provides for read-out of these data at predetermined cyclic intervals.

Rummel, J. A.↗

Radar measurements of Martian topography and surface properties - The 1971 and 1973 oppositions

The Goldstone radar system was used at a wavelength of 12.6 cm to probe the Martian surface during the 1973 opposition. Measurements of range and reflected power were made at least weekly between July 12 and November 24. Surface cells isolated by the radar system were 8 km E-W by 110 km N-S. Altitudes were calculated from signal time delays measured relative to a triaxial ellipsoid and were combined with altitudes measured during the 1971 opposition. Contours of constant altitude were calculated at 200 m intervals between latitudes -14 and -22 deg. These contours are presented in conjunction with Mars charts derived from Mariner 9 television pictures. Reflected power was measured at angles of incidence between -5 and +5 deg. These measurements were combined with those obtained during the 1971 opposition.

Downs, G. S.↗

Signal transit velocities in a turbulent plane jet

A turbulent jet is perturbed transverse to the flow direction by periodic pressure gradients near the nozzle exit. Transit velocities are defined in terms of the measured signal time delay for stations 8, 12, 16 nozzle widths downstream of the nozzle exit. Excitation frequencies to 800 cps are considered. Transit velocities are found to be much less than the jet centerline velocity. The results are related to the convection velocity of turbulence.

Stiffler, A. K.↗

Further development of an indium antimonide (InSb)Charge-Coupled Infrared Imaging Device (CCIRID), 20-element linear imager

Problems encountered in the development of an indium antimonide charge coupled device for infrared imaging and real time signal processing on the focal plane are summarized. A new generation chip is described which contains, 2, 4, and 20-element imagers, a 4-element TDI array, a monolithic gated charge integrator, and test devices. A system study of a future LANDSAT sensor system configured around an InSb TDi array is considered.

Source record↗

Variations of temporal, spectral and angular radar backscattering coefficient of vegetation

Results of an experimental program is reviewed which over the past five years has succeeded in documenting the variations of the radar backscattering coefficient of a variety of crop types as a function of time, signal frequency (1-18 GHz), angular range (nadir to 80 deg) and polarization (HH, VV and HV). The systems were the microwave active spectrometers (MAS); one MAS system covers the 1-8 GHz band and the other system covers the 8-18 GHz band. Each MAS system was mounted on a mobile truck-mounted boom and was operated by a computer controller. To date, these two systems have acquired over 3 million data points from agricultural crops, bare ground and trees.

Ulaby, F. T.↗

Azimuth correlator design for IC chip

Azimuth correlator circuit synthetic-aperature radar (SAR) is designed for single integrated circuit (IC) chip. Azimuth correlator modules constructed with sets of such chips could make real-time signal processing possible. Primary advantages are realized in areas of weight and power requirement reductions.

Tyree, V. C.↗

Lightning current waveform measuring system

An apparatus is described for monitoring current waveforms produced by lightning strikes which generate currents in an elongated cable. These currents are converted to voltages and to light waves for being transmitted over an optical cable to a remote location. At the remote location, the waves are reconstructed back into electrical waves for being stored into a memory. The information is stored within the memory with a timing signal so that only different signals need be stored in order to reconstruct the wave form.

Wojtasinski, R. J.↗

Multispectral data acquisition and classification - Statistical models for system design

In this paper we relate the statistical processes that are involved in multispectral data acquisition and classification to a simple radiometric model of the earth surface and atmosphere. If generalized, these formulations could provide an analytical link between the steadily improving models of our environment and the performance characteristics of rapidly advancing device technology. This link is needed to bring system analysis tools to the task of optimizing remote sensing and (real-time) signal processing systems as a function of target and atmospheric properties, remote sensor spectral bands and system topology (e.g., image-plane processing), radiometric sensitivity and calibration accuracy, compensation for imaging conditions (e.g., atmospheric effects), and classification rates and errors.

Huck, F. O.↗

Application of satellite time transfer in autonomous spacecraft clocks

The conceptual design of a spacecraft clock that will provide a standard time scale for experimenters in future spacecraft., and can be sychronized to a time scale without the need for additional calibration and validation is described. The time distribution to the users is handled through onboard computers, without human intervention for extended periods. A group parallel binary code, under consideration for onboard use, is discussed. Each group in the code can easily be truncated. The autonomously operated clock not only achieves simpler procedures and shorter lead times for data processing, but also contributes to spacecraft autonomy for onboard navigation and data packetization. The clock can be used to control the sensor in a spacecraft, compare another time signal such as that from the global positioning system, and, if the cost is not a consideration, can be used on the ground in remote sites for timekeeping and control.

Chi, A. R.↗

A tactile-output paging communication system for the deaf-blind

A radio frequency paging communication system that has coded vibrotactile outputs suitable for use by deaf-blind people was developed. In concept, the system consists of a base station transmitting and receiving unit and many on-body transmitting and receiving units. The completed system has seven operating modes: fire alarm; time signal; repeated single character Morse code; manual Morse code; emergency aid request; operational status test; and message acknowledge. The on-body units can be addressed in three ways: all units; a group of units; or an individual unit. All the functions developed were integrated into a single package that can be worn on the user's wrist. The control portion of the on-body unit is implemented by a microcomputer. The microcomputer is packaged in a custom-designed hybrid circuit to reduce its physical size.

Baer, J. A.↗

Considerations on real-time processing of spaceborne synthetic aperture radar data

This paper comprises a description of Synthetic Aperture Radar (SAR) processing approaches and a discussion on the processor complexity measures. The objective of the paper is to provide basic system knowledge on the design of a real-time signal processor for spaceborne synthetic aperture radar. A review of SAR sensor performance capability and general electronic processing approaches will be given first. The discussion of SAR processor complexity is divided into two areas: the arithmetic complexity and the control complexity. A generalized treatment of these subjects is provided. The results could be readily extended to special cases.

Wu, C.↗