Search NASA⌕ Search

SEARCH · Search NASA

Results for “TM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Hall and transverse even effects in the vicinity of a quantum critical point in Tm{sub 1-x}Yb{sub x}B{sub 12}

The angular, temperature, and magnetic field dependences of the resistance recorded in the Hall effect geometry are studied for the rare-earth dodecaboride Tm{sub 1-x}Yb{sub x}B{sub 12} solid solutions where the metal-insulator and antiferromagnetic-paramagnetic phase transitions are observed in the vicinity of the quantum critical point x{sub c} Almost-Equal-To 0.3. The measurements performed on high-quality single crystals in the temperature range 1.9-300 K for the first time have revealed the appearance of the second harmonic contribution, a transverse even effect in these fcc compounds near the quantum critical point. This contribution a is found to increase drastically both under the Tm-to-ytterbium substitution in the range x > x{sub c} and with an increase in the external magnetic field. Moreover, as the Yb concentration x increases, a negative peak of a significant amplitude appears on the temperature dependences of the Hall coefficient R{sub H}(T) for the Tm{sup 1-x}Yb{sub x}B{sub 12} compounds, in contrast to the invariable behavior R{sub H}(T) Almost-Equal-To const found for TmB{sub 12}. The complicated activation-type behavior of the Hall coefficient is observed at intermediate temperatures for x {>=} 0.5 with activation energies E{sub g}/k{sub B} Almost-Equal-To 200 K and E{sub a}/k{sub B} 55-75 K, and the sign inversion of R{sub H}(T) is detected at liquid-helium temperatures in the coherent regime. Renormalization effects in the electron density of states induced by variation of the Yb concentration are analyzed. The anomalies of the charge transport in Tm{sub 1-x}Yb{sub x}B{sub 12} solid solutions in various regimes (charge gap formation, intra-gap many-body resonance, and coherent regime) are discussed in detail and the results are interpreted in terms of the electron phase separation effects in combination with the formation of nanosize clusters of rare earth ions in the cage-glass state of the studied dodecaborides. The data obtained allow concluding that the emergence of Yb-Yb dimers in the Tm{sub 1-x}Yb{sub x}B{sub 12} cage-glass matrix is the origin of the metal-insulator transition observed in the achetypal strongly correlated electron system of YbB{sub 12}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics of Tritium Trapping by Point Defects in Intermetallic Al 12 (TM) 2.35 Aluminide Coating Phase

Density functional theory simulations have been carried out to investigate the potential for tritium trapping by metal vacancies in intermetallic Al 12 (TM) 2.35 phase (TM = Fe, Cr, and Ni) as function of temperature and tritium partial pressure. It was found that tritium could be favorably trapped by Fe and Ni vacancies and not favorably trapped by Al and Cr vacancies. However, due to the presence of partially occupied Al sites in bulk Al 12 (TM) 2.35 , leading to the approximate number of ~255 Al atoms in the unit cell, 86 sites were found energetically favorable to the creation of an Al vacancy. While adding a tritium atom in an Al vacancy is not energetically favorable, the tritiated defect still has a negative Gibbs free energy because the energy gain for creating an Al vacancy overcome the energy cost of adding the tritium species. Based on the calculated Gibbs free energy, the first tritiation of a metal vacancy, at conditions relevant to in-reactor operations, should be more favorable for Al, followed Fe, Ni, and Cr vacancies. By comparing the behavior of tritium in Al 12 (TM) 2.35 with previously studied Fe-Al coating phases (i.e., FeNiAl 5 , Fe 4 Al 13 , and Fe 2 Al 5.6 ), we found that there is a correlation between interstitial tritium solubility and the potential for vacancy trapping. The current trend suggests that if the insertion of an interstitial tritium cost more than 0.3 eV, then trapping by metal vacancies should be preferred. By combining the simulations results obtained to date, we noticed different trapping mechanisms of tritium in the Al coating. Tritium is mostly trapped by Fe and Ni vacancies in the outer Fe-Al coating phase Al 12 (TM) 2.35 while tritium should be preferentially trapped by Al and Fe vacancies for the inner Fe-Al coating phases (FeNiAl 5 , Fe 4 Al 13 , Fe 2 Al 5.6 ). Altogether, these studies show that tritium interacts differently with the various Fe-Al aluminide phases, they also suggest that tritium trapping and retention could be more efficient if metal defects are present and if the solubility of interstitial tritium in the different phases is low.

36 MATERIALS SCIENCE↗

Performance evaluation and geologic utility of LANDSAT-4 TM and MSS data

Radiometric calibration accuracy of TM data, radiometric comparison of A-, B-, and P-format data, and geometric registration accuracy of the TM data at enlarged scales were analyzed. Radiometric analysis of the Wind River Basin, Wyoming scene demonstrates that the TM system can be used to extract image reflectance spectra from ground targets following calibration of the system. It was also demonstrated that: (1) image DN (radiance values) vs. ground reflectance calibration scatterplots yield parameters which can be used to constrain atmospheric models and can determine TM radiometric sensitivity; (2) no significant degradation occurs as a result of radiometric and geometric correction by SCROUNGE processing; and (3) TM data can be enlarged to 1:24000 with no major geometric distortions or misregistration problems to USGS topographic maps.

Paylor, E. D.↗

Registratiom of TM data to digital elevation models

Several problems arise when attempting to register LANDSAT thematic mapper data to U.S. B Geological Survey digital elevation models (DEMs). The TM data are currently available only in a rotated variant of the Space Oblique Mercator (SOM) map projection. Geometric transforms are thus; required to access TM data in the geodetic coordinates used by the DEMs. Due to positional errors in the TM data, these transforms require some sort of external control. The spatial resolution of TM data exceeds that of the most commonly DEM data. Oversampling DEM data to TM resolution introduces systematic noise. Common terrain processing algorithms (e.g., close computation) compound this problem by acting as high-pass filters.

Source record↗

Final Comparison of TM and MSS Data for Surface Mine Assessment in Logan County, West Virginia

A variety of classifications during both raw and transformed MSS and TM data sets from 4 September 1982 were performed for the Logan County, West Virginia study area. The object was to compare the utility of TM and MSS data for delineating small, irregular ground features, particularly surface mines, and also to test data reduction/transformation techniques (band selection, canonical analysis, and principal components) in relation to a traditional means of unsupervised classification. Statistical results demonstrate that, on the average, the TM classifications yielded an overall .53 factor of improvement relative to the MSS classifications. When the accuracies for only three minor (in terms of areal extent) land use categories are examined, the factor of improvement for TM over MSS increases to 1.48; i.e., the TM is nearly one and one-half times better than the MSS for delineating small and irregular ground features such as contour strip mines.

Witt, R. G.↗

Preliminary Comparisons of the Information Content and Utility of TM Versus MSS Data

Some preliminary indications were provided as to the relative merits of actual TM data versus MSS data for land cover mapping related applications. Three analyses were designed which had sensitivity to the differences in spectral, spatial and radiometric parameters between the TM and MSS. In the water body analysis, a primarily spatially related test, the detectability of small uniform targets was examined. The principal components analysis, an examination of the inherent dimensionality of the data, was more spectrally and radiometrically related. The spectral clustering analysis, also heavily spectrally and radiometrically influenced, provided information on the types of targets separable on TM versus MSS data. These analyses were to be conducted with simultaneously collected LANDSAT-4 complete TM (7 band) and MSS (4 band) data. In actuality, 4-band TM data, and archived LANDSAT-2 MSS data of the same area were used.

Markham, B. L.↗

A First Evaluation of LANDSAT TM Data to Monitor Suspended Sediments in Lakes

The use of LANDSAT to monitor and track changes in the water quality of Lake Chicot, Arizona was assessed using MSS and TM digital data from nine water sites. Results show that: (1) TM Bands 1, 2, 3, and 4 appear to be providing information on concentrations of particulate matter suspended in surface waters. These bands are also highly interrelated for water samples; (2) preliminary evaluation indicates that TM Band 3 showed the best relationship to surface suspended solids; (3) TM Bands 5 and 7 are useful for separating water from nonwater areas; (4) the MSS Bands 2 and 3 can be related to suspended solids in surface water, as has already been shown from previous LANDSAT research; and (5) analysis of TM Band 6 indicates that while synoptic temperature patterns may be discerned, the digital sensitivity to a two degree temperature difference is low.

Schiebe, F. R.↗

Comparison of classification schemes for MSS and TM data

The launch of the Landsat-4 satellite in July 1982 provided the first full coverage from space of the 0.4-12 micron spectrum of the earth scene. In addition to the green, red, and near IR bands of the MSS, the TM provides a band in the blue, two in the middle IR, and one thermal IR. The paper describes spectral class analysis of coincident MSS and TM data to evaluate the contribution of the additional TM bands. In addition, various classifiers are available which were applied to the TM data. In the spectral class analysis, twice the number of separable classes was found in the TM data compared to the MSS data.

Anuta, P. E.↗

LANDSAT TM image data quality analysis for energy-related applications

This project represents a no-cost agreement between National Aeronautic Space Administration Goddard Space Flight Center (NASA GSFC) and the Pacific Northwest Laboratory (PNL). PNL is a Department of Energy (DOE) national laboratory operted by Battelle Memorial Institute at its Pacific Northwest Laboratories in Richland, Washington. The objective of this investigation is to evaluate LANDSAT's thematic mapper (TM) data quality and utility characteristics from an energy research and technological perspective. Of main interest is the extent to which repetitive TM data might support DOE efforts relating to siting, developing, and monitoring energy-related facilities, and to basic geoscientific research. The investigation utilizes existing staff and facility capabilities, and ongoing programmatic activities at PNL and other DOE national laboratories to cooperatively assess the potential usefulness of the improved experimental TM data. The investigation involves: (1) both LANDSAT 4 and 5 TM data, (2) qualitative and quantitative use consideration, and 3) NASA P (corrected) and A (uncorrected) CCT analysis for a variety of sites of DOE interest. Initial results were presented at the LANDSAT Investigator's Workshops and at specialized LANDSAT TM sessions at various conferences.

Wukelic, G. E.↗

Data space volumes and classification optimization of SPOT and Landsat TM data

In order to compare the data space volume of SPOT XS and Landsat TM images, three data sets, i.e., a wetlands/agricultural data set, an agricultural data set, and a forest data set, are examined. The comparisons are made for the same geographic area. The data space volumes for Landsat TM (2, 3, and 4) are found to be 70 to 100 percent larger than the volumes for the SPOT XS images. It is suggested that the additional midinfrared bands contribute to the difference in data space volumes between Landsat TM and SPOT XS. The data space volumes for Landsat TM bands 3, 4, and 5 are more than an order of magnitude greater than the volumes for the three band SPOT XS data sets. The volumes of the six-band Landsat TM images are four orders of magnitude greater than the SPOT XS. The analysis of the data space volumes is used to optimize the computation time and minimize the storage requirements of a maximum-likelihood classification based on a look-up table.

Ahearn, Sean C.↗

Detection of soil erosion within pinyon-juniper woodlands using Thematic Mapper (TM) data

Multispectral measurements collected by Landsat Thematic Mapper (TM) were correlated with field measurements, direct soil loss estimates, and Universal Soil Loss Equation (USLE) estimates to determine the sensitivity of TM data to varying degrees of soil erosion in pinyon-juniper woodland in central Utah. TM data were also evaluated as a predictor of the USLE Crop Management C factor for pinyon-juniper woodlands. TM spectral data were consistently better predictors of soil erosion factors than any combination of field factors. TM data were more sensitive to vegetation variations than the USLE C factor. USLE estimates showed low annual rates of erosion which varied little among the study sites. Direct measurements of rate of soil loss using the SEDIMENT (Soil Erosion DIrect measureMENT) technique, indicated high and varying rates of soil loss among the sites since tree establishment. Erosion estimates from the USLE and SEDIMENT methods suggest that erosion rates have been severe in the past, but because significant amounts of soil have already been eroded, and the surface is now armored by rock debris, present erosion rates are lower. Indicators of accelerated erosion were still present on all sites, however, suggesting that the USLE underestimated erosion within the study area.

Price, Kevin P.↗

Predicting LANDSAT MSS endmember signatures from corresponding higher resolution TM fraction images

The approach to predicting Landsat Multispectral Scanner System (MSS) endmember signatures from fraction images derived from high resolution Landsat Thematic Mapper (TM) data is presented. The purpose, conducted in the Mogi-Guacu study site located in Sao Paulo State, Brazil, was to determine if information derived from a mixture model applied to higher resolution TM data could serve as ground truth for the lower resolution MSS sensor. The Constrained Least Squares (CLS) method was used to generate vegetation, soil, and shade fraction images from the TM data. The resulting images were then used to estimate the endmember spectral response for MSS data by regressing each MSS spectral channel against the corresponding proportion values estimated for the same resolution cells from the TM mixture model. The evaluation of the predicted signatures was performed by comparing the corresponding fraction images derived from both the MSS and TM data acquired on 14 Sep. 1986. The techniques serves as a potential tool for integrating information in global studies where remote sensors with different spectral and spatial resolutions were used.

Shimabukuro, Yosio E.↗

The Castor 120 (TM) Motor: Development and Qualification Testing Results

This paper discusses Thiokol Corporation's static test results for the development and qualification program of the Castor 120(TM) motor. The demonstration program began with a 25,000-pound motor to demonstrate the new technologies and processes that would be used on the larger Castor 120(TM) motor. The Castor 120(TM) motor was designed to be applicable as a first stage, second stage, or strap-on motor. Static test results from the Castor 25 and two Castor 120(TM) motors are discussed in this paper. The results verified the feasibility of tailoring the propellant grain configuration and nozzle throat diameter to meet various customer requirements. The first and second motors were conditioned successfully at ambient temperature and 28 F, respectively, to demonstrate that the design could handle a wide range of environmental launch conditions. Furthermore, the second Castor 120(TM) motor demonstrated a systems tunnel and forward skirt extension to verify flight-ready stage hardware. It is anticipated that the first flight motor will be ready by the fall of 1994.

Jack G Hilden↗

DAG-TM Concept Element 11 CNS Performance Assessment: ADS-B Performance in the TRACON

Distributed Air/Ground (DAG) Traffic Management (TM) is an integrated operational concept in which flight deck crews, air traffic service providers and aeronautical operational control personnel use distributed decision-making to enable user preferences and increase system capacity, while meeting air traffic management (ATM) safety requirements. It is a possible operational mode under the Free Flight concept outlined by the RTCA Task Force 3. The goal of DAG-TM is to enhance user flexibility/efficiency and increase system capacity, without adversely affecting system safety or restricting user accessibility to the National Airspace System (NAS). DAG-TM will be accomplished with a human-centered operational paradigm enabled by procedural and technological innovations. These innovations include automation aids, information sharing and Communication, Navigation, and Surveillance (CNS) / ATM technologies. The DAG-TM concept is intended to eliminate static restrictions to the maximum extent possible. In this paradigm, users may plan and operate according to their preferences - as the rule rather than the exception - with deviations occurring only as necessary. The DAG-TM concept elements aim to mitigate the extent and impact of dynamic NAS constraints, while maximizing the flexibility of airspace operations

Raghavan, Rajesh S.↗

Using FENOSOL{sup TM} Phenolic Foam as a Shock Absorber for Type B Packaging - 17256

Type B and fissile material transportation packages are designed to withstand deformation from dynamic forces experienced during impacts in hypothetical accident conditions. A critical aspect is to ensure the containment system is not breached. The package design normally includes impact limiters made up of a shell filled with energy-absorbing material. Various types of materials are used as energy absorbers, including wood, foam, and honeycomb structures. Synthetic foam is an ideal material for impact limiters; it has isotropic material properties, it acts as a heat insulator during fire conditions, and it maintains structural integrity at high temperatures. In addition, the density of the foam may be controlled during the manufacturing process, allowing the cask designer flexibility to select the right density for each application. The foam properties can be used as inputs for numerical simulations of dynamic impacts. These simulations are a key component of the safety analysis report for Type B transportation casks. Robatel has recently invested in equipment to produce FENOSOL{sup TM} phenolic foam in our factory for use in our cask designs. This acquisition was made jointly between Robatel and the CEA, with Robatel ensuring the industrialization of the product. In the past decade, this foam was successfully integrated into more than 10 European cask designs, and there has been extensive in-laboratory characterization of its properties. FENOSOL{sup TM} has already been accepted by the French Nuclear Safety Authority (ASN) as a shock absorbing material for use in cask designs. Since the acquisition of the phenolic foam production process by Robatel, a new research and development program has been launched to provide more accurate information to our clients, extend the range of application of this foam, and to improve its properties. Robatel has built an extensive database of material characteristics through the use of a universal mechanical tester, a scanning electron microscope, and a nuclear magnetic resonance spectrometer. In addition, Robatel has successfully implemented FENOSOL{sup TM} in two recent cask designs. This included scale model drop testing of a 9 meter drop in three orientations, and a pin puncture drop test. Robatel is in the process of producing FENOSOL{sup TM} samples for testing according to ASTM standards. Various densities will be included in the study. The testing will include duro-meter hardness, specific heat, thermal conductivity, compressive strength and modulus, and tensile strength. Once the testing is complete, Robatel will compile the data in the form of product specification sheets for each density. These information sheets and test reports will be used to validate FENOSOL{sup TM} for use in future impact limiters for the North American Type B cask market. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Materials Data on Tm(MnGe)2 by Materials Project

Tm(MnGe)2 crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. Tm is bonded in a 8-coordinate geometry to eight equivalent Ge atoms. All Tm–Ge bond lengths are 3.04 Å. Mn is bonded to four equivalent Ge atoms to form a mixture of corner and edge-sharing MnGe4 tetrahedra. All Mn–Ge bond lengths are 2.42 Å. Ge is bonded in a 9-coordinate geometry to four equivalent Tm, four equivalent Mn, and one Ge atom. The Ge–Ge bond length is 2.55 Å.

36 MATERIALS SCIENCE↗

Materials Data on Tm(MnSn)6 by Materials Project

TmMn6Sn6 crystallizes in the hexagonal P6/mmm space group. The structure is three-dimensional. Tm is bonded to eight Sn atoms to form distorted edge-sharing TmSn8 hexagonal bipyramids. There are two shorter (2.99 Å) and six longer (3.14 Å) Tm–Sn bond lengths. Mn is bonded in a 12-coordinate geometry to six Sn atoms. There are a spread of Mn–Sn bond distances ranging from 2.73–2.82 Å. There are three inequivalent Sn sites. In the first Sn site, Sn is bonded in a 6-coordinate geometry to six equivalent Mn atoms. In the second Sn site, Sn is bonded in a 8-coordinate geometry to one Tm, six equivalent Mn, and one Sn atom. The Sn–Sn bond length is 3.01 Å. In the third Sn site, Sn is bonded in a 12-coordinate geometry to three equivalent Tm and six equivalent Mn atoms.

36 MATERIALS SCIENCE↗

Materials Data on Tm(MnGe)6 by Materials Project

TmMn6Ge6 crystallizes in the hexagonal P6/mmm space group. The structure is three-dimensional. Tm is bonded to eight Ge atoms to form distorted edge-sharing TmGe8 hexagonal bipyramids. There are two shorter (2.79 Å) and six longer (2.98 Å) Tm–Ge bond lengths. Mn is bonded in a 12-coordinate geometry to six Ge atoms. There are four shorter (2.52 Å) and two longer (2.69 Å) Mn–Ge bond lengths. There are three inequivalent Ge sites. In the first Ge site, Ge is bonded in a 8-coordinate geometry to one Tm, six equivalent Mn, and one Ge atom. The Ge–Ge bond length is 2.55 Å. In the second Ge site, Ge is bonded in a 6-coordinate geometry to six equivalent Mn atoms. In the third Ge site, Ge is bonded in a 9-coordinate geometry to three equivalent Tm and six equivalent Mn atoms.

36 MATERIALS SCIENCE↗