Search NASA⌕ Search

SEARCH · Search NASA

Results for “TPD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

CO and H 2 adsorption on Au-Ni bimetallic surfaces: a combined experimental and DFT theoretical study

Au-Ni bimetallic thin films were grown on refractory metal substrates. CO and H 2 adsorption on Au-Ni bimetallic surfaces have been studied by a combination of in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. It is found CO desorption peak shifts from 413 K on pure Ni surfaces to 293 K on the isolated Ni atoms formed by alloying with Au atoms. The sharp decrease of CO desorption temperature on Au-Ni surfaces with increasing Au coverage is caused by the change of the favored CO adsorption sites from bridge/hollow sites on pure Ni surfaces to Ni top sites on Au-Ni bimetallic surfaces. In situ PM-IRRAS shows two CO adsorption bands on Au sites at 2119 cm −1 and 2103 cm −1 on Au-Ni surfaces at 80 K, which are due to CO bound on under-coordinated Au atoms and electron negatively charged Au sites modified with nearby Ni atoms, respectively. Even with the Au-Ni surface temperature at as low as 100 K, CO adsorption induced Ni surface segregation has been observed by in situ PM-IRRAS. Furthermore, DFT calculation results discover the adsorption energy of CO on Ni top sites continues to decrease with increasing Au coverage due to the geometric ensemble effect and the lowered d-band center after Ni alloying with Au. H 2 desorption temperature decreases from 363 K on pure Ni thin films to 302 K with increasing Au coverage to 0.6 ML. A new H 2 peak appears at around 170 K on the Au-Ni surfaces with Au coverages between 0.6 ML and 0.9 ML. This new H 2 TPD peak is assigned to H 2 desorption from the totally isolated Ni sites. With Au coverage above 1.5 ML, there is no any H 2 desorption detected. Finally, the combined surface science studies and DFT calculations provide new insights into the surface structure-activity correlation of Ni-base bimetallic surface alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing the surface compositions of supported bimetallic PtSn clusters: Effects of cluster-support interactions and surface adsorbates

PtSn bimetallic clusters on TiO2(110) and highly oriented pyrolytic graphite (HOPG) surfaces have been characterized by scanning tunneling microscopy, low energy ion scattering (LEIS), Xray photoelectron spectroscopy, and temperature programmed desorption (TPD); density functional theory (DFT) calculations have also been performed to better understand adsorption of CO and D2 on the PtSn surfaces. On TiO2 at coverages of 2 ML of Pt and 2 ML of Sn, exclusively bimetallic clusters are formed for both orders of deposition because clusters of the first metal completely cover the surface such that all atoms of the second metal are incorporated into the existing clusters. In contrast, on HOPG, the high mobility and weak cluster-support interactions on HOPG result in much larger 2 ML monometallic clusters (~30 Å high) that do not completely cover the surface, and deposition of the second metal produces larger clusters as well as smaller ones. Despite the difference in cluster morphologies for the different orders of deposition and supports, the LEIS experiments demonstrate that in all cases, the PtSn clusters are rich in Sn at the surface, as expected based on the lower surface free energy for Sn compared to Pt. Furthermore, the +0.2 eV shift in the Sn(3d5/2) binding energy observed on all surfaces in the presence of Pt is consistent with PtSn alloy formation. Deposition of 2 ML of Sn on TiO2 produces two-dimensional clusters with oxidation of Sn and reduction of titania at the clustersupport interface, but addition of Pt to the Sn clusters causes Sn to diffuse away from this interface, leaving Sn in the metallic state. TPD experiments on 2 ML Pt/TiO2 with increasing coverages of Sn show that the number of adsorption sites for D2 sharply decreases to nearly zero at 0.5 ML, while CO adsorption decreases to zero only at much higher Sn coverages of 2 ML. DFT studies for Sn modified Pt surfaces and bulk structures demonstrate that for CO adsorption at low Sn coverages (<0.25 ML), the strong Pt-CO interactions induce diffusion of Pt to the cluster surface and the formation of a bulk Pt3Sn alloy, whereas D2 adsorption does not lead to interactions with the Pt surface that are strong enough to induce alloy formation. A single Sn adatom prevents D2 adsorption on four neighboring Pt atoms via site-blocking and the donation of electron density to Pt.

Li, Fangliang↗

Volatility Basis Set Distributions and Viscosity of Organic Aerosol Mixtures: Insights from Chemical Characterization Using Temperature-Programmed Desorption–Direct Analysis in Real-Time High-Resolution Mass Spectrometry

Quantitative assessment of gas-particle partitioning of individual components within complex atmospheric organic aerosols (OA) mixtures is critical for predicting and comprehending the formation and evolution of OA particles in the atmosphere. This investigation leverages previously documented data obtained through a temperature programmed desorption - direct analysis in real time – high resolution mass spectrometry (TPD-DART-HRMS) platform. This methodology facilitates the bottom-up construction of volatility basis set (VBS) distributions for constituents found in three biogenic secondary organic aerosol (SOA) mixtures produced through the ozonolysis of a-pinene, limonene, and ocimene. The apparent enthalpies (ΔH*, kJ mol -1 ) and saturated vapor mass concentrations (C T *, µg∙m -3 ) of individual SOA components, determined as a function of temperature (T, K), facilitated an assessment of changes in VBS distributions and gas-particle partitioning with respect to T and atmospheric total organic mass loadings (tOM, µg∙m -3 ). Further, the VBS distributions reveal distinct differences in volatilities among monomers, dimers, and trimers, enabling their categorization into separate volatility bins. At the ambient temperature of T = 298 K, only monomers efficiently partition between gas and particle phases across a broad range of atmospherically relevant total organic mass loadings (tOM) values of 1–100 µg∙m -3 . Partitioning of dimers and trimers becomes notable only at T > 360 K and T > 420 K, respectively. The viscosity of SOA mixtures is assessed using a bottom-up calculation approach, incorporating the input of elemental formulas, ΔH*, C T *, and particle-phase mass fractions of the SOA components. Through this approach, we are able to accurately estimate the variations in SOA viscosity that result from the evaporation of its components. These variations are, in turn, influenced by atmospherically relevant changes in tOM and T. Comparison of the calculated SOA viscosity and diffusivity values with literature reported experimental results shows close agreement, thereby validating the employed calculation approach. These findings underscore the significant potential for TPD-DART-HRMS measurements in enabling the untargeted analysis of organic molecules within OA mixtures. This approach facilitates quantitative assessment of their gas-particle partitioning and allows for the estimation of their viscosity and condensed-phase diffusion, thereby contributing valuable insights to atmospheric models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resonant Soft X-ray Scattering Reveals Hierarchical Structure in a Multicomponent Vapor-Deposited Glass

Multiphase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here, in this work, we show that a codeposited system of TPD (N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine) and DO37 (disperse orange 37), two small molecule glass-formers, separates into amorphous, compositionally distinct phases with a domain size and spacing ca. 10s of nanometers that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with atomic force microscopy (AFM) and photoinduced force microscopy to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology RSoXS Simulation Suite (NIST RSoXS simulation suite), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a length scale of phase separation buried within the film that is consistent with the surface composition profile, and correlates to the topography to an extent that depends on substrate temperature. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 codeposited glass with results that outline paths to tune morphology in multicomponent materials.

36 MATERIALS SCIENCE↗

Rational Design of Metalorganic Complexes for the Deposition of Solid Films: Growth of Metallic Copper with Amidinate Precursors

A fourth-generation copper metalorganic compound, Cu(I)-2-(tert-butylimino)-5,5,-dimethylpyrrolidinate, was designed, and its chemistry on nickel surfaces characterized, for use as a precursor for the atomic layer deposition (ALD) of thin solid metal films. On the basis of surface-science studies with similar acetamidinate, guanidinate, and iminopyrrolidinate complexes, it was concluded that the high (and undesirable) reactivity of those when adsorbed on metal surfaces is due to the lability of their C–N bonds, which can be triggered by β-hydrogen elimination steps. Accordingly, a ligand was designed without any available hydrogen atoms at those positions. The result is a much more stable reactant. Temperature programed desorption (TPD) experiments indicated that dehydrogenation from the new compound on Ni(110) starts only at 450 K, an increase of about 200 K in comparison with any of the earlier-generations ALD precursors. TPD and X-ray photoelectron spectroscopy (XPS) data were used to establish the details of the decomposition mechanism of the ligands, which appears to be initiated by the scission of the imino-pyrrolidine C–N bond. Many byproducts are produced, including HCN, N 2 , iso-butene, and possibly pyrroline and other olefins such as pentenes. However, all of that occurs at relatively high temperatures, leaving an acceptable temperature window for the use of this complex for the deposition of copper films. An increased stability of the new ligands in our new copper ALD precursor was also observed on SiO 2 thin films, attesting to the generality of our conclusions. We suggest that our methodology for the rational design of this ALD precursor, based on studies of its surface chemistry, can be easily extended to other cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Capture and Storage for Small-to-Medium Biorefineries: Promising Carbon Removal Solution with Economic Challenges

Carbon capture and storage (CCS) integrated with biomass-based fuel production can provide cost-effective biomass carbon removal and storage (BiCRS) and produce high-value bioproducts, such as sustainable aviation fuels. To accelerate BiCRS deployment, it is crucial to quantify the costs of CCS integration, particularly for small- and medium-scale biorefineries that are representative of early-stage deployment. Existing studies tend to focus on plant sizes that are orders-of-magnitude larger than early-stage installations, possibly underestimating CCS costs for small-to-medium biorefineries. We show that the capture, transport, and storage costs to maximize CO 2 removal from a 526 dry tonne per day (tpd) biomass gasification plant (largest existing size) could be 13–47% higher than costs for a typical modeled plant size (2000 dry tpd). The higher cost estimates are driven by less favorable economies of scale and realistic assumptions about the availability of affordable CO 2 transport infrastructure with both drivers broadly applicable to other BiCRS technologies. Compliance and voluntary carbon markets could incentivize biorefinery CCS, but both carry a high degree of uncertainty. In conclusion, these findings highlight that sufficient and reliable financial mechanisms would be essential to unlocking the full CO 2 removal potential of biorefineries and facilitating BiCRS scale-up.

Biological transport↗

Morphology of Vapor-Deposited Acetonitrile Films

Crystalline acetonitrile has two polymorphs, a high temperature (HT) phase that is stable between 217 K and its melting point at 229 K, and a low temperature (LT) phase that is stable below 217 K. Solid acetonitrile films can be prepared by vapor deposition in an ultra-high vacuum chamber. To prevent sublimation of the film temperatures are often kept below 150 K. While the LT phase is thermodynamically favored at these low temperatures, such preparation usually results in the formation of the metastable HT polymorph. In this work we use reflection adsorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) experiments to investigate the effects of the deposition temperature and underlying substrate on the morphology of acetonitrile films prepared with molecular beam deposition. We obtained the elusive LT phase when dosing at 120 K on a graphene substrate and on a crystalline decane layer. Dosing acetonitrile on other surfaces produced the HT phase, as did annealing of amorphous films. We used TPD experiments to determine the Gibbs energy difference between the HT and LT phases. Our ΔG values agree with extrapolation of equilibrium calorimetry data. Furthermore, we also observed that acetonitrile films were amorphous when dosed at temperatures ≤ 60 K, and porous for temperatures ≤ 50 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗

The Surface Chemistry of Methanol on TiO 2 (110): Effects of Pressure and Temperature on the Stability of C–O and C–H Bonds

Synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the surface chemistry of methanol on TiO 2 (110), examining the effects of methanol pressure, oxide temperature, and coadsorption with H 2 . At 300 K, the adsorption of methanol on TiO 2 (110) leads to the formation of CH 3 O on the surface with a minor amount of CH 3 OH present. The easy cleavage of the O–H bond in the alcohol agrees with the predictions of theoretical calculations, and most of the adsorbed CH 3 O was not associated with the presence of Ti 3+ sites in the oxide substrate. The adsorbed CH 3 O was removed from the TiO 2 (110) surface by heating to 600 K without the deposition of CH x fragments or C on the oxide. The results of temperature-programmed desorption (TPD) showed the evolution of methanol and formaldehyde at 360 and 490 K as a result of a disproportionation reaction: 2CH 3 O → CH 3 OH + CH 2 O. This surface chemistry, where there is no rupture of the C–O bond, and only selective cleavage of O–H and C–H bonds, is very different from that found on metals used in catalysts for methanol reforming, where massive conversion of the alcohol into CO, CH x and C species is seen. Furthermore, the TPD data indicate that any CH 3 O formed on the oxide surface can be hydrogenated and desorbed as CH 3 OH at temperatures below 550 K. In this respect, titania is an ideal support for catalysts employed to achieve methanol synthesis through CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

D 2 O Interaction with Planar ZnO(0001) Bilayer Supported on Au(111): Structures, Energetics and Influence of Hydroxyls

Here, we investigate the interaction between D 2 O and the planar ZnO(0001) bilayer grown on Au(111) with temperature programmed desorption (TPD), low energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. We show that D 2 O molecules adsorbed on this planar surface form two ordered overlayers, a (3 × 3) and a (√3 × √3) R 30°, not seen before on any of the bulk ZnO single crystal surfaces. The apparent activation energies of desorption (Ed) estimated from TPD peaks are 15.2 and 16.7–17.3 kcal/mol for (3 × 3) and (√3 × √3) R 30°, respectively, which agree well with the adsorption energy values calculated from DFT (14.9–15.6 kcal/mol and 16.8–16.9 kcal/mol, respectively). The DFT calculations reveal that the formation of the overlayers takes place at different packing densities and is mediated by extensive hydrogen bonding among the molecules. The hydroxyl groups, which accumulate very slowly on the ZnO(0001) bilayer surface under the standard ultrahigh vacuum (UHV) environment, strongly suppress the formation of the (√3 × √3) R 30° overlayer but have less impact on the (3 × 3) overlayer. These findings are explained based on the difference in packing densities of the overlayers such that only the (3 × 3) overlayer with a more open structure can accommodate small amounts of the adsorbed hydroxyl groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO Adsorption on Au Nanoparticles Grown on Hexagonal Boron Nitride/Rh(111)

CO adsorption on size-controlled Au nanoparticles grown on an $h$-BN/Rh(111) nanomesh surface has been examined to probe their potential catalytic properties. A combination of high-resolution electron energy loss spectroscopy (HREELS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations demonstrate that the CO adsorption strength depends heavily on the Au deposition coverage and particle morphology. Particles resulting from low Au coverages deposited at the liquid nitrogen temperature exhibit significantly enhanced CO binding relative to bulk crystalline Au. The resulting CO TPD spectra, and the significantly red-shifted C–O stretching frequency and negative charging of the Au nanoparticles as evidenced by HREELS and DFT, all correspond to those reported for catalytically active Au nanoparticles grown on reactive metal oxides, even though the h-BN/Rh(111) surface is free of carbon, oxygen, or defects. DFT modeling further suggests that the enhanced CO adsorption occurs at highly undercoordinated Au atoms on the perimeters of the nanoparticles. As the Au coverage is increased, the CO adsorption energy and C–O stretching frequency converge toward values associated with bulk Au. Annealing to 600 K results in bulk-like CO adsorption characteristics at any Au coverage. These results suggest that the $h$-BN/Rh(111) surface represents a potential platform for evaluating the role of Au vs support in low-temperature CO oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coadsorbed Species Explain the Mechanism of Methanol Temperature-Programmed Desorption on CeO 2 (111)

Here, we have used density functional theory calculations to investigate the temperature-programmed desorption (TPD) of methanol from CeO 2 (111). For the first time, low-temperature water formation and high-temperature methanol desorption are explained by our calculations. High coverages of methanol, which correspond to experimental conditions, are required to properly describe these features of the TPD spectrum. We identify a mechanism for the low-temperature formation of water involving the dissociation of two methanol molecules on the same surface O atom and filling of the resulting surface vacancy with one of the methoxy products. After water desorption, methoxy groups are stabilized on the surface and react at higher temperatures to form methanol and formaldehyde by a disproportionation mechanism. Alternatively, the stabilized methoxy groups undergo sequential C–H scission reactions to produce formaldehyde. Calculated energy requirements and methanol/formaldehyde selectivity agree with the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface chemistry of aromatic reactants on Pt- and Mo-modified Pt catalysts

Supported catalysts containing an oxophilic metal such as Mo and a noble metal such as Pt have shown promising activity and selectivity for deoxygenation of biomass-derived compounds. Here, we report that PtMo catalysts also promote hydrogenolysis of the model compound benzyl alcohol, while decarbonylation is most prevalent over unmodified Pt. A combination of single crystal surface science studies, density functional theory (DFT) calculations, and vapor phase upgrading experiments using supported catalysts was carried out to better understand the mechanism by which Mo promotes deoxygenation. Molybdenum was deposited in submonolayer quantities on a Pt(111) surface and reduced at high temperature. Temperature-programmed desorption (TPD) experiments using benzyl alcohol as a reactant showed greatly enhanced yields of the deoxygenation product toluene at moderate Mo coverages. To understand how the interaction of the aromatic group with the surface influenced this reactivity, we investigated the adsorption of toluene as a probe molecule. We found that the addition of Mo to Pt(111) resulted in a significant decrease in toluene decomposition. DFT calculations indicated that this decrease was consistent with decreased aromatic adsorption strengths that accompany incorporation of Mo into the Pt subsurface. The weaker aromatic-surface interaction on Pt/Mo surfaces led to a tilted adsorption geometry for benzyl alcohol, which presumably promotes hydrogenolysis to produce toluene instead of decarbonylation to produce benzene and CO. Alumina-supported Pt and PtMo catalysts were also tested for benzyl alcohol deoxygenation. PtMo catalysts had a higher rate of toluene production and lower rates of benzene and benzaldehyde production. Additionally, when benzaldehyde was used as the reactant to measure decarbonylation activity the mass-normalized rate of benzene production was 2.5 times higher on Pt than PtMo. Altogether, the results of TPD, DFT, and supported catalyst experiments suggest that subsurface Mo sites weaken the binding of aromatic rings on PtMo surfaces; the weakened aromatic-surface interaction is correlated with an improvement in selectivity to C-O bond scission.

09 BIOMASS FUELS↗

Elucidation of Active Sites for the Reaction of Ethanol on TiO 2 /Au(111)

Obtaining a molecular-level understanding of the reaction of alcohols with heterogeneous model catalysts is critical for improving industrial catalytic processes, such as the production of H 2 from alcohols. Gold has been shown to be an excellent oxidation catalyst once oxygen is added to it. The use of reducible oxides provides a source of oxygen on Au(111) for the reaction of ethanol, which is easily regenerated in the presence of an oxygen background. In this work, ethanol operates as a probe molecule to investigate the role of Au(111), TiO 2 nanoparticles, and TiO 2 /Au interfacial surface sites on the catalytic properties of TiO 2 /Au(111). Ultrahigh vacuum temperature-programmed desorption (TPD) studies with ethanol/Au(111) elucidate previously unreported adsorption sites for ethanol. Ethanol molecularly adsorbs to Au terrace sites, step edges, and undercoordinated kink sites with adsorption energies of -51.7, -55.8, and -65.1 kJ/mol, respectively. In a TPD coverage study of ethanol on TiO 2 /Au(111) indicates ethanol undergoes dissociative adsorption to form H*(a) and CH 3 CH 2 O*(a) on the inverse model catalyst surface. The desorption temperature of low coverages of ethanol from TiO2/Au(111) (Tdes ≈ 235 K) is at an intermediate temperature between the desorption temperatures from bulk Au(111) and TiO 2 (110), indicating both Au and TiO 2 play a role in the adsorption of ethanol. Both low-temperature adsorption and high-temperature reactions are studied and indicate that ethanol-derived products such as acetaldehyde and ethylene desorb from TiO 2 /Au(111) at ~500 K. Here, we report the identification of catalytically active sites on TiO 2 /Au(111) as interfacial sites between the oxide and Au(111) surface through the use of temperature-programmed desorption and infrared reflection absorption spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular water adsorption and reactions on (alpha)-Al2O3(0001) and (alpha)-Alumina Particles

The adsorption and reaction of water on single crystal, -Al2O3(0001) in ultrahigh vacuum, and -alumina particles in ambient conditions, was investigated using temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), diffuse reflectance infrared Fourier transform spectra (DRIFTS) and other surface science techniques. For a water coverage of 1 H2O/(surface Al3+) on -Al¬2O3(0001), no evidence for the surface hydroxyls expected from dissociative adsorption was observed in the infrared spectra, while the 2 vibration of molecular water was observed. Electron-stimulated desorption of molecular water at low coverages also indicated molecular or mixed (molecular plus dissociative) adsorption. Analysis of Kr TPD spectra showed that the water films wet the alumina substrate and suggested that the films were initially growing layer-by-layer. In contrast with the single crystal results, DRIFTS of water adsorption on alumina particles indicated the presence of surface hydroxyls that persist even after annealing to high temperatures in oxygen. For water on -Al2O3(0001) at coverages less than 0.3 H2O/(surface Al3+), water desorbed over a broad temperature range extending from ~250 K to 700 K. For larger coverages, water desorption occurred at temperatures between ~160 K and 250 K, consistent with desorption of molecular water. The results, which are consistent with at most a small amount of water dissociation on the Al-terminated (0001) surface, are difficult to reconcile with calculations suggesting that the barrier to dissociation is small. However, the results are consistent with recent vibrational sum frequency experiments showing that the hydroxylation of the Al-terminated (0001) surface takes many days even at ambient pressures and temperatures.

Petrik, Nikolay G.↗

Diffusion and photon-stimulated desorption of CO on TiO2(110)

Thermal diffusion of CO adsorbed on rutile TiO2(110) was studied in the 20 - 110 K range using photon-stimulated desorption (PSD), temperature programmed desorption (TPD) and scanning tunneling microscopy. During UV irradiation, CO desorbs from certain photoactive sites (e.g. oxygen vacancies). This phenomenon was exploited to study CO thermal diffusion in three steps: first empty these sites during a first irradiation cycle, then replenish them with CO during annealing, and finally probe the active site occupancy in the second PSD cycle. The PSD and TPD experiments show that the CO diffusion rate correlates with the CO adsorption energy – stronger binding corresponds to slower diffusion. Increasing the CO coverage or hydroxylation of the surface decreases the CO binding and increases the CO diffusion rate. Relative to the reduced surface, the CO adsorption energy increases and the diffusion decreases on the oxidized surface. The CO diffusion kinetics can be modeled satisfactorily as an Arrhenius process with a “normal” prefactor (i.e. = 1012 s 1) and a Gaussian distribution of activation energies where the peak of the distribution is ~0.28 eV and the full width at half maximum (FWHM) is 0.1 eV at the lowest coverages. The observations are consistent with a significant electrostatic component of the CO binding energy on the TiO2(110) surface which is affected by changes in the surface dipole and dipole-dipole interactions.

Petrik, Nikolay G.↗