Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRACI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Application of the Baseline Rotonet system to the prediction of helicopter tone noise

The capabilities of the baseline Rotonet system designed to predict helicopter noise are analyzed. The modules of the system utilized for main and tail rotor geometry and blade section aerodynamic characteristics, for analyses, and for source-to-observer geometry, and atmospheric and ground effects calculations are described; a diagram of the system is provided. The Rotonet system produces axial force, tone noise, and sound pressure level information and a one third octave spectrum related to rotor tone noise and broadband noise sources. Main rotor noise predictions are compared with flight data. It is observed that both sets of data reveal increase loading on the advancing side and decrease loading on the retreating side. The tone noise and sound pressure levels for the first and second harmonics correlate well with the flight data; however, there is only fair agreement for the third harmonics of the sound pressure level. Analysis of the spectra display lower noise levels for higher altitudes and lower speeds. It is noted that the baseline Rotonet system is applicable for predicting performance and noise signatures for the lower harmonics. A phase II Rotonet system for evaluating higher harmonics is being developed.

Golub, R. A.↗

Dose protraction studies with low- and high-LET radiations on neoplastic cell transformation in vitro

The effects of the low- and high-LET radiation (by X-rays, Co-60, and heavy ions) on the transformation of neoplastic cells were studied using cultured C3H10T1/2 mouse embryo cells. The transformed colonies in the confluent cell monolayers were recognized as focuses composed of highly polar fibroblastic multilayered criss-cross arrays of densely stained cells. For the low-LET radiation, there was a decrease in cell killing and cell transformation frequency when cells were irradiated with fractionated doses and at a low dose rate, indicating that cultured mammalian cells can repair both subtransformation and potential transformation lesions. No sparing effect, however, was found for the high-LET radiation. An enhancement of cell transformation was observed for low-dose/rate argon (400 MeV/u; 120 keV/micron) and iron particles (600 MeV/u; 200 keV/micron). The molecular mechanism for this enhancement effect is not known.

Yang, Tracy Chui-Hsu↗

Arc-textured metal surfaces for high thermal emittance space radiators

Carbon arc electrical discharges struck across the surfaces of metals such as Nb-1 percent Zr, alter the morphology to produce a high thermal emittance surface. Metal from the surface and carbon from the arc electrode vaporize during arcing, and then condense on the metal surface to produce a microscopically rough surface having a high thermal emittance. Quantitative spectral reflectance measurements from 0.33 to 15 microns were made on metal surfaces which were carbon arc treated in an inert gas environment. The resulting spectral reflectance data were then used to calculate thermal emittance as a function of temperature for various methods of arc treatment. The results of arc treatment on various metals are presented for both ac and dc arcs. Surface characterization data, including thermal emittance as a function of temperature, scanning electron microscopy, and atomic oxygen durability, are also presented. The ac arc texturing was found to increase the thermal emittance at 800 K from 0.05 to 0.70.

Banks, Bruce A.↗

Contamination of liquid oxygen by pressurized gaseous nitrogen

The penetration of pressurized gaseous nitrogen (GN2) into liquid oxygen (LOX) was investigated experimentally in the 7-inch High Temperature Tunnel, the pilot tunnel for the 8-foot High Temperature Tunnel (8'HTT) at Langley Research Center. A preliminary test using a nuclear monitor revealed the extent of the liquid nitrogen (LN2) build-up at the LOX interface as a function of GN2 pressure. Then an adaptation of the differential flash vaporization technique was used to determine the binary diffusivity of the LOX-LN2 system at a temperature of 90.2 K. The measured value D equals 0.000086 sq cm/s + or - 25 percent together with two prior measurements at lower temperatures revealed an excellent fit to the Arrhenius equation, yielding a pre-exponential factor D sub 0 equals 0.0452 sq cm/s and an activation enthalpy H equals 1.08 kcal/mol. At a pressure of 1700 psi and holding time of 15 min, the penetration of LN2 into LOX (to a 1 percent contamination level) was found to be 0.9 cm, indicating but minimal impact upon 8'HTT operations.

Zuckerwar, Allan J.↗

Neoplastic cell transformation by high-LET radiation - Molecular mechanisms

Quantitative data were collected on dose-response curves of cultured mouse-embryo cells (C3H10T1/2) irradiated with heavy ions of various charges and energies. Results suggests that two breaks formed on DNA within 80 A may cause cell transformation and that two DNA breaks formed within 20 A may be lethal. From results of experiments with restriction enzymes which produce DNA damages at specific sites, it was found that DNA double strand breaks are important primary lesions for radiogenic cell transformation and that blunt-ended double-strand breaks can form lethal as well as transformational damages due to misrepair or incomplete repair in the cell. The RBE-LET relationship for high-LET radiation is similar to that for HGPRT locus mutation, chromosomal deletion, and cell transformation, indicating that common lesions may be involved in these radiation effects.

Yang, Tracy Chui-Hsu↗

A smoke generator system for aerodynamic flight research

A smoke generator system was developed for in-flight vortex flow studies on the F-18 high alpha research vehicle (HARV). The development process included conceptual design, a survey of existing systems, component testing, detailed design, fabrication, and functional flight testing. Housed in the forebody of the aircraft, the final system consists of multiple pyrotechnic smoke cartridges which can be fired simultaneously or in sequence. The smoke produced is ducted to desired locations on the aircraft surface. The smoke generator system (SGS) has been used successfully to identify vortex core and core breakdown locations as functions of flight condition. Although developed for a specific vehicle, this concept may be useful for other aerodynamic flight research which requires the visualization of local flows.

Richwine, David M.↗

Modification of the background flow by roll vortices

Use of observed wind profiles, such as those obtained from ascent or descent aircraft soundings, for the identification of the expected roll modes is hindered by the fact that these modes are able to modify the wind profiles. When such modified wind profiles are utilized to estimate the critical values of the dynamic and thermodynamic forcing rates, large errors in the preferred orientation angles and aspect ratios of the rolls may result. Nonlinear analysis of a 14 coefficient spectral model of roll circulations shows that the primary modification of the background wind is the addition of a linear component. When the linear profile having the correct amount of shear is subtracted from the observed cross-roll winds, then the pre-roll wind profile can be estimated. A preliminary test of this hypothesis is given for a case in which cloud streets were observed during FIRE.

Shirer, Hampton N.↗

Martian impact craters - Correlations of ejecta and interior morphologies with diameter, latitude, and terrain

An effort is made to establish the ability of a correlation between crater morphology and latitude, diameter, and terrain, to discriminate among the effects of impact energy, atmosphere, and subsurface volatiles in 3819 larger-than-8 km diameter craters distributed over the Martian surface. It is noted that changes in ejecta and interior morphology correlate with increases in crater diameter, and that while many of the interior structures exhibit distributions interpretable as terrain-dependent, central peak and peak ring interior morphologies exhibit minimal relationships with planetary properties.

Barlow, Nadine G.↗

Boundary layer roll circulations during FIRE

The probable mechanism underlying the development of boundary layer roll circulations are studied using wind and temperature profiles measured by the National Center for Atmospheric Research (NCAR) Electra during the stratocumulus phase of the First ISCCP Regional Experiment (FIRE). The expected, or preferred, roll orientations, horizontal wavelengths, and propagation periods are determined by finding the minimum values of the dynamic and thermodynamic forcing parameters, which here are the eddy Reynolds number (Re) and moist Rayleigh number (Ra sub m). These minimum values depend on the height z sub T of the capping temperature inversion and on the values of the Fourier coefficients of the background height-dependent vector wind profile. As input to our nonlinear spectral model, descent and ascent runs by the Electra provide for initial estimates of the inversion height and the wind profiles. In the first phase of the investigation presented here, a mechanism is said to be a probable contributor to the development of roll circulations within the stratocumulus-topped boundary layer if the modeled roll orientation and wavelengths agree with their observed values. Preliminary results using the 14-coefficient model of Haack-Hirschberg (1988) are discussed for the 7 July 1987 Electra Mission 188-A (Flight 5). This mission was flown across a sharp cloud boundary that was within a LANDSAT/SPOT scene. The stratocumulus deck was relatively solid in the eastern part of the scene, while there was a rapid decrease in cloud cover to scattered cumulus clouds aligned in streets to the west. These cloud streets were oriented nearly parallel to the mean wind direction in the layer, which was approximately 340 degrees. The hypothesis that roll circulations occurred in both the relatively clear and the cloudy regions is investigated using as model input a descent profile obtained in the relatively clear air and an ascent profile obtained in the cloudy air. Initial results for the clear air case are that the pure inflection point mode is not possible and the pure thermal mode was oriented 35 degrees to the right of the mean wind direction. The origin of this unacceptably large discrepancy between the observed and modeled results will be investigated further and the conclusions reported at the next FIRE workshop.

Shirer, Hampton N.↗

Heterogeneous distributed databases: A case study

Alternatives are reviewed for accessing distributed heterogeneous databases and a recommended solution is proposed. The current study is limited to the Automated Information Systems Center at the Naval Sea Combat Systems Engineering Station at Norfolk, VA. This center maintains two databases located on Digital Equipment Corporation's VAX computers running under the VMS operating system. The first data base, ICMS, resides on a VAX11/780 and has been implemented using VAX DBMS, a CODASYL based system. The second database, CSA, resides on a VAX 6460 and has been implemented using the ORACLE relational database management system (RDBMS). Both databases are used for configuration management within the U.S. Navy. Different customer bases are supported by each database. ICMS tracks U.S. Navy ships and major systems (anti-sub, sonar, etc.). Even though the major systems on ships and submarines have totally different functions, some of the equipment within the major systems are common to both ships and submarines.

Stewart, Tracy R.↗

Radiological health risks for exploratory class missions in space

The radiation risks to crewmembers on missions to the moon and Mars are studied. A graph is presented of the cross section as a function of linear energy transfer (LET) for cell inactivation and neoplastic cell transformation. Alternatives to conventional approaches to radiation protection using dose and Q are presented with attention given to a hybrid of the conventional system for particles with LET less than 100 keV/micron.

Nachtwey, D. Stuart↗

Numerical simulation of the emission and motion of neutral and charged dust from P/Halley

The present numerical model for neutral or charged dust-particle distribution prediction in P/Halley encompasses the spatial and temporal variations of the plasma parameters and magnetic field. A significant difference is noted between results for neutral dust trajectories and the trajectories of charged dust particles with radii smaller than 0.1 micron. While most of the model and in situ mass spectra were in good agreement, there is a shortage of the lowest-mass model particles, as well as an offset of the total counting rate for two outbound mass spectra. A combination of two Lorentzian particle mass-density functions with a 100:1 ratio for the number of particles with the lower and higher density functions yielded the best agreement.

Ellis, Tracy A.↗

Smoke Generator For Studies Of Vortices In Flight

Smoke-generating system used to identify vortex-core and vortex-core-breakdown locations in flights. Housed in forebody of airplane, includes multiple pyrotechnic smoke cartridges fired simultaneously or in sequence. Firing of cartridges controlled from cockpit, and smoke produced ducted to desired locations on or near surface of aircraft. Useful for other aerodynamic flight research in which necessary to visualize local flows. Nonaerospace applications include research in reduction of aerodynamic drag on vehicles and reduction of turbulence related to structures or other obstacles.

Richwine, David M.↗

Timing and formation of wrinkle ridges in the Tyrrhena Patera Region of Mars

Wrinkle ridges are distinctive linear to curvilinear arches topped by crenulated ridges and have been identified on the Moon, Mercury, and Mars. The presence of wrinkle ridges on other planetary surfaces has been used as a criterion for identifying volcanic plains. Recently, due to the presence of lava flow lobes and leveed channels, Greeley and Crown identified an area within Hesperia Planum as a flank flow unit associated with Tyrrhena Patera. Hesperia Planum surrounds Tyrrhena Patera and embays the eroded shield of the volcano to the north and south. The Tyrrhena Patera flank flow unit extends approx. 1000 km from the summit caldera to the southwest. More than 55 wrinkle ridges have been identified on this flank flow unit. The relationships between the lava flows and wrinkle ridges within the flank flow unit allow relative ages to be determined. Wrinkle ridges are classified as post flow if flow lobes appear to arch over the rises undeformed, with no evidence of flow ponding on the upstream side of the ridge, or of flows breaching the rises. Wrinkle ridges within Hesperia Planum and Tyrrhena Patera flank flow unit that trend NW-SE appear younger than the flank flow unit.

Porter, Tracy K.↗

Physical properties of lava flows on the southwest flank of Tyrrhena Patera, Mars

Tyrrhena Patera (TP) (22 degrees S, 253.5 degrees W), a large, low-relief volcano located in the ancient southern highlands of Mars, is one of four highland paterae thought to be structurally associated with the Hellas basin. The highland paterae are Hesperian in age and among the oldest central vent volcanoes on Mars. The morphology and distribution of units in the eroded shield of TP are consistent with the emplacement of pyroclastic flows. A large flank unit extending from TP to the SW contains well-defined lava flow lobes and leveed channels. This flank unit is the first definitive evidence of effusive volcanic activity associated with the highland paterae and may include the best preserved lava flows observed in the Southern Hemisphere of Mars. Flank flow unit averages, channelized flow, flow thickness, and yield strength estimates are discussed. Analysis suggests the temporal evolution of Martian magmas.

Crown, David A.↗

The Air Force Manufacturing Technology (MANTECH): Technology transfer methodology as exemplified by the radar transmit/receive module program

The Air Force Manufacturing Technology program is involved with the improvement of radar transmit/receive modules for use in active phased array radars for advanced fighter aircraft. Improvements in all areas of manufacture and test of these modules resulting in order of magnitude improvements in the cost of and the rate of production are addressed, as well as the ongoing transfer of this technology to the Navy.

Houpt, Tracy↗